128,402 used machines on RESALE, but how to find them? Machine Search
Robot KUKA KR240 R2700 prime KRC4 mechanics only Max. load capacity: 240 kg Max. working range: approx. 2700mm Scope of delivery : Robot mechanics without accessories
Dosing machine AG 8 DPE 250 built in 2012 with hot double jacket on the storage tank and accessories (filling heads and screw conveyor)
9 Removable 21 Shelf Racks Auction-ID: A1-45803-5
Robotic TIG Welding Cell Equipment: Rotatable Welding Table – with two interchangeable frames KUKA KR6 R1820 industrial robot arm Year of manufacture: 2018 Serial number: 425602 Weight: 168 kg Max. Load capacity: 6 kg Reach: 1820mm KUKA KR C4 smallsize-2 controller / controller Year of manufacture: 2018 Serial number: 380929 Weight: 123 kg TIG Dinse DIX TIG 350 AC/DC Welding Machine Serial number: 19840519 TEKA Caremaster BIA welding fume extraction equipment (2 pcs.) Capacity: 2200 m³/h Connection Parameters: 400V / 50Hz / 2.5A Power: 1.1KW Weight: 125kg/pc Year of manufacture: 2008 6-section steel cabinet Equipped with additional accessories
Immediately available completely overhauled injection pump
This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210
PLC control, digital output, digital input, digital input module -Manufacturer: B&R, Digital input module with bus module -Type: X20 DI 837 -Bus module: X20 BM 11 -Number: 2 modules available -Price: per piece -Dimensions: 100/20/H75 mm -Weight: 0.1 kg/pc.
Auction-ID: A1-45793-102
Beer bottling line, Framax 9-8-1 filler, pressure filler, double pre-evacuation, module block RFCI 09-08-1 DPS-C, year of construction: 2014, set up for 330ml bottles, with labeling machine, self-adhesive labels Beer Bottling line, Made by: Framax 9-8-1 Filler, Counter pressure filler, isobaric, double pre-evacuation, Modulblock RFCI 09-08-1 DPS-C, Year: 2014, adjusted to 330ml, 33cl, 0,33l glass bottles, Labeller Labelling machine, self adhesive labels
T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...
An inspection system for bottle label inspection is offered, Throughput capacity 15,000 bph With 3 cameras and control
Incl. control and control panel Axles: 6 Hand load capacity 16 kg
Size per roll 1200x3100 mm, on pallet Auction-ID: A1-45866-8
Year of Make: 1989 Overhaul: 2020 Capacity: up to 12,000 bph 0.5l Counter-pressure filler for beer with long pipe Product: Beer, soft drinks and mineral water Bottle: Glass, 0.33; 0,5; 0,75; 1.0 L Capper: Crown cork
Bosch Injection Pump for MAN D2842 LE211 with GAC controller, cf. MAN part number: 51.11103-7451 59.11103-7451 N (l/min): 750 RW (mm): 12.7 or 13.6 EPP-FM (mm³/H): 332 or 367
Inv. Num. : 7714 Type: PJS Producer: AMT Created: 2021 Parameters: The device is in good condition.
Inv. Num. : 7715 Type:- Producer: AMT Created: 2014 Parameters: Capacity: 2000 kg/hod
SKF TIH 070m/230V Induction Heater Auction-ID: A1-45977-289
Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (new bearing, 4 x new transport belts/belts, etc.) Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) Documentation: Operating instructions, spare parts catalogue and electrical diagram available If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.
B&A REF: 9053 TON: 80 SHOT WEIGHT: 183 SCREW DIAMETER: 40MM STROKE VOLUME: 201CM3 INJECTION PRESSURE: 1860AR PLATEN SIZES: 670 X 670MM DBTB: 420 X 420MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 8.12KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
KUKA KR150L110 robot Number of axes: 6 Max. load capacity: 110 kg Max. reach: approx. 3100mm Year of manufacture: 8/2009 Scope of delivery: robot, controller, cable, teach panel
Key data: 700 kN, 35 mm
used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English ...
Bosch Injection Pump for MWM 232 for sale Bosch Number: 62801845
100 pieces of inserts NEW consisting of: 30 pieces CNMG120408 for steel 30 pieces CNMG120408 for stainless steel 20 pieces CNMG120408 for aluminum 20 pieces CNMG120408 CERMET The composition of the set can be changed on request.
100 pieces of inserts NEW consisting of: 30 pieces APKT1604 for steel 30 pieces APKT1604 for stainless steel 20 pieces APKT1604 for aluminum 20 pieces APKT1604 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
maximum number of results exceeded
please refine your search
50 € 
