in franc used for sale

PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input -Type: 6ES7 321-1BH01-0AA0 S C-4B63318 E-Status:3 -Number: 3x module available -Price: per piece -Dimensions: 115/40/H130 mm -Weight: 0.3 kg/piece

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Refer to code 1016 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

PLC control, digital input, digital input, input module -Manufacturer: mushroom, digital input Digital Input 24VDC -Type: P10-DI 304100 -Number: 7x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 1.0 kg/pc

PLC control, digital input, digital input, input module -Manufacturer: mushroom, digital input Digital Input 24VDC -Type: P10-DIF 304105 -Quantity: 1 piece available -Dimensions: 250/230/H40 mm -Weight: 0.9kg

Refer to code 1052 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

Position computer, computer, control unit, robot controller, controller -Manufacturer: Pilz, AT-Industriecomputer -Type: P10-ATW VGA 304512 -Dimensions: 310/250/H165 mm -Weight: 4.4 kg

Spray machine -Closing force: 25 tons -Screw diameter: 22 mm -Unilog 2040 control unit -Slat spacing: 250x250 mm -Data collection terminal -Parts removal device, manufacturer ASS -Temperature control unit, manufacturer Single

PLC control, digital input, digital input, input module -Manufacturer: Schleicher, digital input Digital Input 24VDC -Type: UBE 24V 10D 31406792 -Quantity: 3x module available -Price per piece -Dimensions: 150/35/H200 mm -Weight: 0.5 kg/pc.

HADEF crane bridge 3.2 to, 19 m wide, 18m crane runway crane Overhead crane / gantry crane / overhead crane,5 m high, DONGES bridge 19 m wide, full working, German Crane, Year 2003 - Crane already dismantled, chassis can still be dismantled - free loading

For sale : 1000ml SLIM conversion kit for A3flex machine. I send photos by email.

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg

COMPLETE TETRA PAK TPA/21-1000 SQUARE LINE, MANUF. IN 2001, CONSISTS: - TPA/21-1000 FILLER, V50, ONLY 14.000 RUNNING HOURS, INCLUDES A NITROGEN INJECTION STATION, - TCA/88 APPLICATOR - TCBP/70 WRAP AROUND PACKER, - CONVEYORS SYSTEM. CONVEYORS. EXCELLENT CONDITION WE PROVIDE DISMANTLING, INSTALLATION AND START UP SERVICE.

For sale : 200/250 ml Square conversion kit for A3flex machine. I send photos by email.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -4 set: hard jaws -2 set: soft jaws -Dimensions: see photos / technical. drawing -Price/sale: only complete -Transport dimensions: 480/320/H150 mm -Weight: 57.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: hard jaws -7 set: soft jaws -Dimensions: see photos / technical. drawing -Price/sale: only complete -Transport dimensions: 700/450/H120 mm -Weight: 101.6 kg

Sigmatek CDI 163 C-DIAS digital bus module input module. Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. If there are any uncertainties with the software (e.g. in the case of monitoring the serial number by the software), we may be able to help. Feel free to call us.

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: Festo, input module -Type: CP-E16-M12X2 -Item no.: 18206 -Quantity: 1x modules available -Dimension: 145/80/H55 mm -Weight: 0.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 65/80/H45 mm -Total weight: 1.2 kg

Type: PI 26 Number of needles: 26 Needle diameter: 4 mm Max product: width 340 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 4.5kW Machine dimension in cm: Width: 70 Length: 170 Height: 200 Delivery time: 30 working days after advanced payment

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo techn. drawing -Total dimensions: 80/90/H55 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 36 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/110/H85 mm -Total weight: 6.3 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 28 mm -Dimensions: see photo techn. drawing -Total dimensions: 115/85/H75 mm -Total weight: 3,7 kg

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 30 mm -Dimensions: see photo techn. drawing -Total dimensions: 105/90/H75 mm -Total weight: 3,6 kg

Type: PI 54 Number of needles: 54 Needle diameter: 4 mm Max product: width 340 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 8kW Machine dimension in cm: Width: 85 Length: 200 Height: 230 Delivery time: 30 working days after advanced payment

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/60/H55 mm -Total weight: 1,2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H50 mm -Total weight: 1.5 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 14 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/42/H33 mm -Total weight: 0,3 kg

Roughness measuring device from the Hommelwerke. The following parts are part of the delivery: - T1000E measuring station - The Hommel Tester LV15 with installed skidding probe T1E, ArtNr 240000 - Power supply for charging the batteries: Type FW 1289 - Control cable for the LV15 to the T1000E - Hommel Printer P 1010 with started paper roll and start print head. -Suitcase

Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 24 mm -Overall dimensions: 100/90/H80 mm -Total weight: 3.1 kg

Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 70/60/H55 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/65/H45 mm -Total weight: 1.0 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 14 mm -Dimensions: see photo techn. drawing -Total dimensions: 50/40/H35 mm -Total weight: 0,3 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 14 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/42/H33 mm -Total weight: 0,3 kg

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Dimensions total: 55/55/H42 mm -Total weight: 0.6 kg

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

Offer 23108 Specifications: - Welding current max. 550 A 60% ED - 420 A 100% ED - Welding current adjustable 50 A - 550 A - 3 coarse steps + 12 fine steps - Separate wire feeder case with between package 4 m - 4 roller wire feeders infinitely adjustable 0.5 - 24 m/min - 2 stroke + 4 stroke - regulation - water-cooled hose package approx. 4 rm - Ground cable -Reducer - Connection 400 V / 64 A - Space requirement approx. W 550 x H 1310 x D 1050 mm - Weight approx. 150 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 14 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/42/H33 mm -Total weight: 0,3 kg

Machine condition: cleaned and tested Year of construction: 2013 Main motor incl. Mentor control suitable for KBA RA 106 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Haitian 1400 ton High Tonnage Year 2009 In production Can be inspected Availability Immediate

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo techn. drawing -Total dimensions: 51/48/H45 mm -Total weight: 0,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 82/63/H74 mm -Total weight: 1.9 kg