in franc used for sale

Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...

Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit  ...

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Switchgear, control, flame sensor, flame monitor, UV flame sensor, UV sensor -Manufacturer: Siemens, infrared flame sensor OVP -Type: QRA55.C17 -Voltage: 100-110 V -Dimension box: 220/65/H65 mm -Weight: 0.5 kg

Milling machine DECKEL MAHO DMG 125

Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Lenght: 340 Height: 250 Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery

Injection pump overhauled 746673-51203

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1100/560/H1140 mm -Weight: 126 kg

Power converter, power converter, controller, inverter, inverter, solar power converter -SMA: SUNNY MINI CENTRAL photovoltaic inverter -PAC nom: 8000 W -Dimensions: 610/480/H250 mm -Weight: 21 kg

MIG/MAG hose package extension, intermediate hose package -Length: 16.0 m -Plug -Water cooled -Weight: 16 kg

Safety switch, safety interlock -Type: AZM 161SK-12/12RK-024 -Protection class: IP 67 -Locking force maximum: 200 kg -Volt: 230 V. -Number: 14x available -Price: per piece -Dimensions: 130/90/H30 mm -Weight: 0.4 kg

TO WHOM AT MAY CONCERN ; WE VE NEW UNUSED 3 SETS NAPIER NA 307 GAS INLET& OUTLET CASINGS AND INLET ELBOWS AT OUR STOCK. 3 SETS GAS INLET & OUTLET CASINGS ARE NEW AND NEVER MONTAGED . PLS REFER SOME PICTURES ON ATTACHE IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Inductive sensor, electronics sensor -Manufacturer: IFM, inductive sensor -Type: IGM207 -Number: 2x sensors available -Price: per piece -Dimension rolled up: 150/150/H20 mm -Weight: 0.3 kg/piece

Contactor, semiconductor contactor, contactor, power contactor, illuminated button, indicator light approach -Square D: indicator light attachment D1V1Y -Diameter: 22 mm -Price: per piece -Quantity: 40 pieces -Minimum order quantity: 5 pcs -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece

Valve bridge inlet MAK M43 and M43C recon MAK Part Number: 433515-200

Indexing tube without man 40/54 tap MAN Part Number: 419.01.004

ALREADY SOLD Hylectric 90ton HL90 RS45/42 for sale ask for details 400volts 50hz

We can offer Arburg injection moulding machines, 220,270,420 etc.all goog condition.Serious buyers contact us. We have many brands, models,years machines, tell me what you need seriously!

Contactor, semiconductor contactor, contactor, power contactor, illuminated pushbutton, indicator light attachment -Square D: indicator light attachment DWSM -Diameter: 22/30 mm -Minimum order quantity: 5 pcs -Quantity: 84 pieces -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece

We can offer a Krauss Maffei injection moulding machine, manufactured in 2017, short time working, like new one, serious buyer contact us. We have many brands, models,years machines, tell me what you need seriously!

liquid conveyors lubrication unit for 5 Tetra Pak lines, excellent condition

Washer for efficient and gentle washing of ampoules, vials and bottles. Output: up to 2'500 vials/h. Machine comes with format parts for 5-, 10- and 20 ml vials.

Contactor, semiconductor contactor, contactor, power contactor, illuminated push button, indicator light system -Square D: indicator light attachment D1V1W -Diameter: 22 -Price: per piece -Quantity: 90 pieces -Minimum order quantity: 5 pieces -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece

Key data: 61 , 75

Origin Engine 9.1 L: 90 kW mechanical power gas supply: natural, LNG, biogas or wood gas liquid-cooled exhaust manifolds single coil per cylinder ignition system crankcase venting motor coupled to generator Generator Linz: active power - 75 kVA turnovers - 1500 1/min

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg

Sprocket, sprockets, single sprocket for roller chain, drive chain -Gear: 76 teeth -Sprocket pitch: 1 x 17.02 mm 16B-1 -Shaft mounting: Inner Ø 50 mm -Dimensions: see drawing in the photos -Number: 4x gears available -Price: per piece -Overall dimensions: Ø 628 x 58 mm -Weight: 38 kg

1 used service water pump HABERMANN HPK, power 600 cbm/h, impeller diameter 660, H 33, good condition, E -Motor SONDERMEIER GmbH Type KG315 S/7, 110 kW

RECON Part Number: 305781B Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 203091 -Price: per piece - Quantity: 4 pieces -Dimensions: 150/45/H50 mm -Weight: 0.2 kg/piece

1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posivel PVC-26, new 2011 (excellent condition). Column 2.350 mm tall. Designed for a maximum lifting load of 36 KG. Maximum radius 2.600 mm. Vertical stroke 1.400 mm. Fitted with 71 mm diameter expander-type gripper for tubes with 90-degree (vertical/horizontal) swivel motion. 2 units available. Visible rack is for transport purposes only and not included (available at additional cost).

Inductive sensor, electronics sensor -Pepperl+Fuchs Part No.: 187481 -Price: per piece -Number: 5 pieces -Dimensions: 80/50/H50 mm -Weight: 0.2 kg/piece

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes

Recon Part Number: 117753 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Recon Part Number: 1231 4275 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

moving point, moving center point, moving center point, moving lathe point, pressing tool toggle press -Component: from a rotating center point -Use: e.g. as a pressing tool -Dimensions: see photo techn. drawing -Dimensions: Ø 66 x 320 mm -Weight: 3.3 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 230 V -Dimensions: 1200/560/H1250 mm -Weight: 133 kg

RECON Part number: 0212 7795 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

PLC control, digital input, digital input -Manufacturer: SIEMENS -Type: Simatic S7 6ES7 421-1BL00-0AA0 -Dimensions: 25/210/H290 mm -Weight: 0.81 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks, 15-piece set: soft jaws -Hole spacing: 44 mm -Width: 28 mm -Various versions available: see photos, more pictures can be sent upon request -Price/Sale: only complete set -Overall dimensions: 470/180/H80 mm -Weight: 8.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 54 mm -Width: 45 mm -Dimensions: 135/120/H30 mm -Weight: 0.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 40 mm -Width: 30 mm -Dimensions: 120/90/H80 mm -Weight: 3.4 kg

RECON Part number: 0212 7791 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: SMW Autoblok, top jaws for power chucks 2 sets -Type: 012494 WAK 400-10, see photos -Hole spacing: 54 mm -Width: 34 mm -Price/sale: only complete -Dimensions: 170/190/H80 mm -Weight: 7.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, Top jaws for power chucks, 3 sets -Type: SFA-AL 315, see photos -Hole spacing: 54 mm -Price/Sale: only complete set -Overall dimensions: 160/215/H90 mm -Weight: 6.8 kg