128,877 used machines on RESALE, but how to find them? Machine Search
Description: The mill is in overhauled condition. The machine housing has been completely overhauled. Rotor is equipped with new blow bars. Impact mechanisms and lateral wear plates are new. incl. three-phase motor 45kW, B3, voltage 400/690V, 50Hz, 1485/min. incl. hydraulic power unit, 3kW incl. V-belt pulleys for mill and motor Comprehensive spare parts package consisting of: - 3 pieces of rotor used (in good condition) - 1 piece rotor new - Various pallets with blow bars, wear pieces, impact mechanisms, etc. - Inlet hood
The machine is in very good condition Year of construction 2008 Max. Duty 40mm Capacity: approx. 10-50 to./h Weight is 6.3 tons Dimensions: 3.5 x 2.02 x 2.21m
Refurbished impact mill with 45 kW drive, inlet hood and hydraulic unit for opening the housing. The scope of delivery includes an extensive spare parts package (rotors, blow bars, wear pieces, impact mechanisms, etc.). Not run since the overhaul in 2025, therefore in very good condition.
Ref. 501 Impact scissors Cutting length 120 cm Table width 73 cm Accessories: 2 sets of knives ( upper and lower knives ) Condition: Used / Functional Ref. 501 Cardboard Scissors Cutting length 120 cm Table width 73 cm Accessories: 2 knife sets ( upper and lower knife ) Condition: Used / Functional
Stock number: PJ244, Impeller pump, stainless steel,, Jabsco type 10340-41., Pump head on foot,, Ø 2 connections., Theoretical capacity at 1400 rpm., 21000 l/h., excl. motor., Material: Stainless steel AISI 304
equipped with ø 35 mm air hose, Auction-ID: A1-43992-261
Stock number: PJ243, Impeller pump, stainless acid proof steel,, Jabsco Pureflo model 10510., 0,55 kW motor, 220/380 V., 1375 rpm., Ø 1 connections,, theoretical capacity 4500 l/h., Material: Stainless acid proof steel AISI 316
Stock number: PJ237, Impeller pump, stainless steel,, Jabsco., 0,55 kW gear motor, 220/380 V., Variable speed 85-486 rmp., Theoretical capacity 4,25-24,30 l/h., Ø 1 connections., Material: Stainless steel AISI 304
Note, sorted out. Auction-ID: A1-43751-144
Stock number: PJ245, Impeller pump, stainless acid proof steel., Jabsco serie 370., 2,2 kW motor 224 rpm, 220/380 V., Ø 2 connections., Theoretical capacity 2.957 l/h., at 1 bar., Material: Stainless acid proof steel AISI 316
Stock number: PJ234, Impeller pump head, stainless steel,, 1½, Jabsco model 28400 - 7015., Material: Stainless steel AISI 304
Stock number: PJ219, Impeller pump, stainless steel,, 1, Jabsco type 10510-66, 0,37 kW motor, 935 rpm, 220/380 V., Theoretical capacity 3060 l/h., Material: Stainless steel AISI 304
For sale I offer a pneumatic wrench/impact wrench RAMI Yokota MI3800PR 1 inch from 2019. The pneumatic wrench has been used before and shows signs of wear corresponding to its age. Further condition please see the pictures. Dates: -Impact wrenches for industrial applications -Used -Year of construction: 2019 -Drive square: 1" -Air consumption: 15l/s -Torque: 2100Nm -Operating pressure: 6.3bar -Impact mechanism: closed hammer -Metal housing -Weight 9.3Kg Shipping available for an extra charge. The pneumatic wrench is sold workshop-tested and immediately ready for use with a new UVV test. # Impact Wrench # Pneumatic Wrench # Pneumatic Impact Wrench # RAMI Yokota # Toku # MI3800 # 1inch # 1"
Stock number: PJ217, Impeller pump, stainless steel,, 1, Jabsco model 10-2.001-C., Mounted on foundation., Air driven., Variable speed and capacity., Material: Stainless steel AISI 304
Stock number: PJ202, Impeller pump, stainless steel,, 3/8, Jabsco model 903-200., 0,15 kW gear motor, 700 rpm, 190 V., Theoretical capacity 560 l/h., Material: Stainless steel AISI 304
Stock number: PJ213, Impeller pump, stainless steel,, 1½, Jabsco model 10270-41, 0,55 kW gear motor, 458 rpm, 220/380 V., Theoretical capacity 3900 l/h., Material: Stainless steel AISI 304
For sale I offer a pneumatic wrench RAMI Yokota MI17MG 1/2 inch from 2019. The pneumatic wrench is an unused display piece with slight traces of storage. Further condition please see the pictures. Dates: -Impact wrenches for professional use in workshops. -New/Exhibit -Year of construction: 2019 -Drive square: 1/2" -Air consumption: 7.4l/s -Torque: 600Nm -Operating pressure: 6.3bar -Impact mechanism: Twin Hammer -Metal housing -Weight 2.5Kg Shipping available for an extra charge. The pneumatic wrench is sold workshop-tested and immediately ready for use with a new UVV test. # Impact Wrench # Pneumatic Wrench # Pneumatic Impact Wrench # RAMI Yokota # Toku # MI17 # 1/2inch # 1/2"
Stock number: PJ197, Impeller pump, stainless steel,, 1, Johnson type 10-2.001-C., Mounted on foundation plate., Air driven., Variable speed and capacity., Material: Stainless steel AISI 304
Stock number: PJ198, Impeller pump, plastic,, 3/8, Jabsco type 21560., 0,25 kW motor,, 1340 rpm., 220/380 Volt,, Theoretical capacity 1200 l/h., Material: Plastic
Stock number: PJ084, Impeller pump, stainless steel,, 2, Jabsco model 10340-41, 1,1 kW motor, 690 rpm, 220/380 V., Theoretical capacity 9440 l/h., Material: Stainless steel AISI 304
Stock number: PC1256, Impeller pump, stainless steel,, Alfa Laval type LM-1, 1,5 kW, 450 rpm. 220/380V, Ø 2½ connections, Material: Stainless steel AISI 304
Properties: Length 800 mm Width 330 mm Total height 770 mm Weight 22.4 kg Manufacturer ELMOR MORATTO - Italy Speed 905 min ̄¹ Installed engine power 1.85 kW Series: 03-13-5620.004 Connections: Input: DN 50 Output: DN 50
Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM Mega Pulse)Pulse Welding Machine with Inverter Welding Power SourceFabr. No. 065013 built in 1998Power 400 Amp. = 60% ED 320 Amp. = 100 % EDEinfinitely variable adjustment rangeMains connection 400 Volt, 50 Hz, 32 Amp. Plug - separate 4-roll wire feeder with connecting hose pack meter - Digital display for voltage and current- Pulse welding device with single and double pulses - 2-stroke and 4-stroke welding device - 4 meter Binzel hose pack with
Light Weight Impeller Impeller Wheel Size : 710mm Impeller Material : M/S S275JR Shaft Material : Carbon Steel Fan Shaft : OD 2-1/4” x 870mmL Shroud : 2mm Fin Support Ring : 2 mm Back Plate C : 4 mm Fin D : 2 mm Included Test Run by 3rd Party - Test run by 3rd party during blower commissioning at F42, the supplier will be present to witness the overall performance of the impeller. This is to identify any fault in the fabricated impeller. Included Balancing report - All wheels are dynamically balanced to ISO1940 or AMCA204-G2.5 standard, with reports provided.
VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, control panel, good working conditions, Constructed in 11-2001, offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric
Impact crusher with inlet opening 1,000 mm x 350 mm, throughput capacity: up to 30 to./h (manufacturer's specs), maximum feed size: 300 mm, required drive: 37 kW. Except for the drive, all parts (doors, inlet, etc.) are available, but currently not assembled. The scope of delivery also includes an extensive wear parts package.
Rotor Dia. x W: 1.300 x 1.300mm. - Inlet: 1.360 x 1.000mm. - With 160KW E.Motor and Control-cabinet with soft-starter - New spare-parts in stock.
Rotor Dia. x W.: 1.300 x 1.340mm. . With E.Motor and Inlet.
Rotor Dia. x W: 1.000 x 700mm - Included: 55 kW Electrical motor, Inlet, Hydraulic pump with control panel, 500 KG Service Crane. Many spare-parts in stock! Crusher can be sandblasted and painted.
Mach. No.: AD 26953 - Motor: Scania - Rotor size: 1.400 x 1.500mm - Included: Conveyors, Overband Separator, Dumpbunker, Feeders, Pre-screen and Hydraulic openingssystem
Inlet size: 1.370 x 990 mm - Rotor W x Dia.: 1.250 x 1.300 mm - With 200 kW Electrical motor
Inlet size: 1.020 x 700 mm - Rotor W x Dia.: 980 x 1.260 mm - With Electrical motor
Rotor Dia. x W.: 1.000 x 680mm. - Inlet: 690 x 350mm. - Included: 55KW E.motor, control-unit, hydraulic-unit and frame. New spare-parts in stock.
ID3649 Nordberg LT1213 year/Year of construction 2002 approx. 10,000 hours/hours 41.5 t Mobile track impact mill, with pre-screening and side discharge belt Chain-mounted impact mill, with pre-screening and side discharge belt
ID3646 Liedlbauer Bullcon 2001 year/Baujahr 2000 approx. 2.570 hours/hours 13 t Mobile impact crusher on wheels, crusher opening length 0.66 m, crusher opening width 0.62 m, crusher has been refurbished and serviced, ready for use, optionally 2 pallets of wear and spare parts available Mobile impact mill on wheels, crusher opening length 0.66 m, crusher opening width 0.62 m, crusher has been prepared and after-sales service has been carried out, condition ready for use, optional 2 pallets of wear and spare parts available
Impact crusher 8/4/3 S3 Infeed width 480 mm Inlet height 400 mm Maximum feed up to 250 mm hard rock Capacity up to 60 t/h depending on gap setting Drive power 45 - 90 kW The machine has completely new wear parts The rotor is overhauled with new blow bars Includes hydraulic power unit for swingarms and housing Basic machine with infeed hopper
Year of construction unknown Impression work Numbering device suitable for GTO 46 4 numbering machines, 7 digits, counting forward Delivery date: immediately from stock
\"Control: PLC-based with touchscreen interface and programmable recipes” Separate control over heating, cooling, and pressure parameters Maximum Weld Width: Up to 3000 mm (118 in)\" Auction-ID: A7-40551-6
maximum number of results exceeded
please refine your search
10 € 
