137,098 used machines on RESALE, but how to find them? Machine Search
Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.
Keyence XG-X2500 Image Processing Controller, Image Processing Controller XG-X Manufacturer: KeyenceManufacturer part: XG-X2500Type: Image processing controller, compatible with 5 megapixel camerasManufacturing country: Japan Item condition: This article comes from a company dissolution of one of the largest automotive parts suppliers in Germany and was stored there in paternosters, so some original packaging is missing and some articles have traces in stock. PSH2R3E19-7
Grafoteam PST 26/780 plate stacker; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26/780; good condition; cleaned and checked; new arm motor; max.plate size 820x780mm, min.324x394mm.
Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.
SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 μm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Sample Types: Supports SBS standard plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes, and microscope slides Throughput: Can expose up to 250 plates per day Automation: Fully automated with options for integration into robot systems Voltage (U): 100 – 240 V AC 50/60 Hz Power (P): 295 VA max Created: 01/2011 More items - new and used - can be found in our shop! International shipping costs on request!
A Heidelberg imagesetter for prepress is available. Laser wavelength: 680nm, laser class: 1, max. positive format: 505mm/535mm, max. negative format: 505mm/545mm, scan line length: 505mm, max. screen frequency: 200lpi, repeatability: +/-5µm, max. output speed: approx. 1320mm/h, materials: RC paper/film/polyester printing plates, max. material thickness: 0.2mm. Machine dimensions X/Y/Z: approx. 1200mm/750mm/1100mm, weight: approx. 250kg. An on-site inspection is possible.
Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP Plate Setter - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output speed: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Sturdy construction for prepress environments
Manufacturer: Cognex Type: In-Sight 9912 IS9912M-373-50 (monocromn with RedLine) From stock liquidation Location: Stuttgart
• Max. exposure format: approx. 505 × 525 mm • Max. film width: approx. 530 mm • Material thickness: up to approx. 0.10 mm • Resolution: up to 200 lpi (256 gray levels), optionally up to 400 lpi with delta technology • Accuracy: ± 0.2 mils (0.005 mm) across the entire screen and multiple films • Speed: up to approx. 1,320 mm/h film running length • Interfaces: High-Speed Bitmap/SpeedWay Interface, RIP connection • Power supply: 100-240 V AC, 47-63 Hz (single-phase RIP), main unit 3-phase supply • Dimensions (L × W × H): approx. 1,200 × 750 × 1,100 mm • Weight: approx. 250–300 kg • Operation: Daylight loading, exposed film or RC paper, optional CTP (polyester) plates
Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.
original Kodak laser head lift for TH3
Flexo Laser FL- Piccolo (Xeikon) – flexo CTP year 2008 fiber laser 20W – 1.25 plates/h approx. 3,000 m2 exposed rotating external drum vacuum Digital Exposable Photopolymer Flexo Plates all thickness, all brands exposable size 635 x 762 mm Resolution 2540 dpi data format separated 1 bit tiff weight 500 kg good condition
CTP System Creo Trendsetter VLF 5880; good condition; Video Die Cutter Hatchet OPU 200 VB Bj.2017; Observation Unit Mega Steel; Development machine Kodak THDX 165 Bj.2014; intermediate table; Outlet table. CTP System Creo Trendsetter VLF 5880; good condition; optical video punch Beil OPU 200 VB year 2017; control terminal Mega steel; processor Kodak THDX 165 year 2014; intermediate table; outfeed table.
A fluorescence image analyzer is offered for sale. Protection class: IP20. Equipped with monitor, keyboard, software CDs, manuals. Inspection possible by appointment.
1.0 St. gebr. Image Processing Measuring Device Manufacturer: MITUTOYO Type: QS200Z Year of Make: 2011 For technical data, see photos.
Image processing system, central unit, high-end image processing, image processing controller, camera controller -Manufacturer: Keyence, image processing system image processing controller -Type: XG-X1500 -Extension modules: -DC40E / -NEC20E see photos -Shipping/Price: complete -Dimensions: 180/150/H175 mm -Total weight: 2.5 kg
Image processing system, central unit, high-end image processing, image processing controller, camera controller -Manufacturer: Keyence, Image processing system, Image processing controller -Type: XG-X2800 -Expansion module: CA-E200L (see photos) -Submission/Price: complete -Dimensions: 200/155/H175 mm -Total weight: 2.5 kg
Automatic filling and capping machine for glass or plastic bottles, for liquid and semi-liquid products Equipped: - Vial infeed conveyor, with plastic pallets width 82 mm - length 1800 mm - Entry star with 20 vial transfer cells in pairs or with a 10-cell vial transfer star one by one - 60-cell transfer star from two-by-two vials to packaging stations or 30-cell transfer star one by one to packaging stations - Product filling station with 2 stainless steel spouts (up to 8 spouts can be installed) - Product dosing station by 4 volumetric dispensers - 2 capping stations with positive suction grip with feeding by 2 stainless steel vibrating bowls with a diameter of 450 mm - Traffic jam presence control station - Control panel with Omron touchscreen - Omron PLC - General drive by motor-variator - Protective guards with safety - Stainless steel frame Current tools: - Round bottle with dia ...
The Olympus BX43 microscope is an upright microscope with cost-effective, advanced configurations that can be customized to your needs. THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety ...
Auction-ID: A1-51267-4110
Sold without power supply Auction-ID: A1-51267-5016
LLTECH Light-CT Scanner for Ex-vivo Cellular Imaging In-depth skin imaging in high-resolution 3D Without software
Fuji Imaging Plate System / CR System FCR Capsula X with: Reader Type CR-IR 357 Primary processing station 10 cassettes IP Cassette Type CC: 24x30 - 6 pcs./ 35x43 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.
Fuji Imaging Plate System/ CR System FCR Capsula X with Reader Type CR-IR 357 Primary processing station Cassettes IP Cassette Type CC: 18x24 - 2 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • To recommission the device, you will most likely need a license from the device manufacturer. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.
Fujifilm Luxel 6300 S (Screen PT-R 4300 S) year 2012 size 830 x 630 mm 32 diodes 21 plates/h exposure time 8,600 h Running time 24,500 h Apogee Prepress Manager Proliant ML150 Gen9 Windows Server Grafoteam stacker plate processor Glunz&Jensen 85 HDX in production good condition
Model MX5115 Table size 640 × 580 mm Table tilt 0-45° Vertical table stroke 100-120 mm Maximum working thickness 50-120 mm Engine power 2.2 kW / 3.0 kW Power supply 220 V / 380 V, 50Hz Spindle speed 15,000/18,000 rpm Tool shank diameter 6.35 mm - 12.7 mm Transport dimensions 780 × 710 × 900 mm Weight 150/180 kg Price 760 Eur (EXW Jonava, Lithuania)
for conventional plate exposure, maximum flexo plate size approx. 950 × 950 mm, very well maintained facility, price on request
LLTECH Light-CT scanner for ex-vivo cellular imaging; ; In-depth skin imaging in high-resolution 3D; Without software; Untested equipment; ; Internal reference: FA-1643; Auction-ID: A1-50994-1186
Maximum bar diameter 75 mm Maximum spindle speed Rpm 3000 Vector motor power Kw 12 Maximum torque Nm 230 Maximum turret stroke 180 mm Maximum distance between turret and clampmm 290 Minimum distance between turret and gripper mm 110 Tool holes Nr 6 Diam. Of turret holes mm 31.75 Rapid slide speed m/min 10 Maximum thrust force daN 1200 Gearbox speed (indexing) sec 0.3'' Tool detachment mm 0.2 Slide X1,X2, X3,X4 nr 4 Maximum stroke 70 mm Quick speed m/min 10 Maximum force daN 1200 Slide Z2 Nr 1 Maximum stroke Z2 mm 120 Rapid speed Z2 m/min 10 Maximum force Z2 daN 1200 Hydraulics with C.N.C. management Max bar 35 Pliers system in use Din 6343 C.N.C. numerical control Axes 8 Installed power Kw 18 Working pressure Bar 70 Refrigeration flow rate Lt/m 50 Tank capacity Lt 200\" Auction-ID: A7-50976-1
Image Intensifier M10495 Cooling Controller C10520 Cooling Unit C10520-02 Head/intensifier with HVPS optics C10520-02. ➜ Functional, but coolant leaked → damaged paint and dehumidification system Auction-ID: A1-51157-18
Thermal imaging camera, LCD display, temperature range -10 + 400 degrees, lithium battery with USB charge, never used Overall dimensions: 200 x 200 x 200 mm Weight: 1 kg Auction-ID: A7-50798-159
Thermal imaging camera, LCD display, temperature range -10 + 400 degrees, lithium battery with USB charge, never used Overall dimensions: 200 x 200 x 200 mm Weight: 1 kg Auction-ID: A7-50798-315
EM-CCD Camera Hamamatsu ImagEM X2 Filter Exchanger Hamamatsu C8214 Lens and Associated Optics Interference Filters (461HBP40, 510HBP10, etc.) Mount and Mechanical Stand Auction-ID: A1-51157-6
Universal milling machine - Huron head - Assembly device for Huron head - horizontal counter holder - Documentation - Coolant system - Machine feet x-way 700 mm y-travel 250 mm z-travel 300 mm Table size 1000 x 230 mm Spindle holder ISO 40 Spindle speeds 35- 1500 rpm Total power requirement 3.0 kW Machine weight approx. 1.4 t Dimensions L x W x H 1.55 x 1.4 x 1.65 m Condition: untested Auction-ID: A7-51438-457
SuperSonic Imagine Aixplorer Ultrasound Scanner with 3 Probes Manufacturer: SuperSonic Imagine Model: Aixplorer Probes Included: E12-3 (endocavitary), SL15-4 (linear), C6-1 (convex) Options: DICOM, DICOM QIR, V64, foot pedal, biopsy, laser printer, contrast, PWV, thermal printer, remote service, panoramic, neonatal, Triple Mode, High PRF Features: Real-time ShearWave elastography, UltraFast imaging Condition: To be repaired – turns on but won't start, untested, sold as is Auction-ID: A1-51275-160
Year of construction 2014 Suitable for printing books working condition Auction-ID: A1-47451-251
Kodak CTP system, machine number M4Q3115, year 2013, 74 format, with automatic cassettes If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
VILBER LOURMAT QUANTUM-ST5 Gel Documentation Imaging Quantum is an imaging system for the documentation of gels with flexible evolution possibilities. It is designed for molecular biology laboratories. Auction-ID: A1-51527-165
Thermal printer for bags, labels, etc. Equipped: - Printhead mounted on an adjustable support to be attached to a machine (labeller, bagging machine, etc.) - Ribbon printing station. - Display (mini-console) with the possibility of programming printing in numbers, letters, logos, graphic images, barcodes. - Stainless steel power box. Maximum capacity: Maximum ribbon width 55 mm Maximum ribbon length 500 meters Max. print width 53.3 mm Max. print length 106.6 mm Printing max. 4 lines of 20 characters Maximum production: 500 prints/minute Total electrical power: 200 watts Auction-ID: A1-51318-299
BIO-RAD Universal Hood II ChemiDOC XRS+ Molecular Imager The ChemiDoc XRS+ Gel Imaging System is a rapid detection system for chemiluminescence, fluorescence and colorimetry imaging Auction-ID: A1-51527-56
Automatic blow moulding machine with vial suction. Equipped: - 90 mm wide bottle conveyor. - Screw for transferring the vials to the blowing turret. - Star with 4 cells for entering the vials to the 16 prism clamps. - Prism clamps rotating 180° and bringing the bottles to the blowing and suction stations (without a vacuum cleaner at the moment) with the neck down. - Blowing inside the vials by plunging injection nozzles. - Turning the vials to their initial position. - Evacuation of vials by 4-cell star. - General drive by motor-variator. - Power box with \"siemens\" PLC - Touch screen control. - Stainless steel frame. - Protective guards with safety Current tools: Bottle diameter 60 mm and 65 mm (200 and 370 ml) Capacity: Dimensions of the bottles Minimum diameter 10 mm - maximum 70 mm Minimum height 50 mm - maximum 170 mm Max. Production: 200 cpm Electrical power: ...
Professional machine for the production of croquettes and meatballs IMA PLUS STAR 1. Inventory condition: Refurbished. Brand: IMA. Model: PLUS STAR 1. Internal reference: RS02846. Serial number: 20PS-280. Professional equipment for the dosing and forming of croquettes and meatballs. System for regulating the size and format of the portions according to configuration. Nominal reference production: up to 2,000 croquettes per hour. Nominal reference production: up to 3,000 meatballs per hour. Reference filler capacity: 8 kg.Reference electrical power: 700 W.Reference power supply: 220 V / 50 Hz / single-phase. Reference construction in AISI 304/316 stainless steel and POM-C technical materials. Digital control system according to version. Automatic dosing system for batter liquid and breadcrumbs according to configuration. Approximate reference external dimensions (width x depth x height): ...
maximum number of results exceeded
please refine your search
10 € 
