im used for sale

Impulse Pumps proudly presents the SIP 200-8HP, an exceptional addition to our esteemed SIP-series range. This pumpset is meticulously engineered to provide unparalleled pumping capabilities, especially when it comes to handling higher discharge heads. With the SIP 200-8HP, you can experience enhanced performance and conquer even the most challenging pumping tasks with ease., , Equipped with a robust JCB 448 diesel engine, the SIP 200-8HP delivers outstanding power and reliability. This engine, combined with Impulse’s cutting-edge technology, ensures optimal performance even under demanding conditions. You can trust our pumpset to meet the highest emission regulations while prioritizing safety, empowering you to operate efficiently and confidently., , Navigating complex equipment is a thing of the past. The user-friendly Ecomizer-Pro pump controller by Impulse provides real-time insigh ...

This Imulse SIP 100-4 dirty water pump is often used for sewer detour, dewatering, surface drainage and liquid transport. Operating the pump is extremely easy and is controlled by Impulses Ecomizer-Pro control system. This control system can analyze improper use and misuse of the pump, protecting itself from unnecessary wear costs and/or damage., , Some notable features:, - Running time on a full 200-liter tank: 220 hours on average, - Permeable solids: 80 mm, - Maximum capacity / maximum head: 135 m³/h / 22 meters, - Vacuum pump for priming: automatically shuts off once the pump is filled with water, , If you have any questions please feel free to contact us., , Throughput capacity: 135 m3/h, Max dirt passage: 80 mm, Motor brand: Hatz, Max. head: 22 MWK, Max dirt passage: 1800 rpm, Weight: 1700 kg, , = More information =, , General information, Year of manufacture: 2025, Applicable mat ...

The SIP 150-6 screw impeller pump is designed and built to meet the needs and demands of much of the world without the need for advanced technologies. This mobile pump unit is the simplest and most basic version in our range of 6″ screw impeller pumps., The Budget configuration is a typical old-fashioned mechanical configuration, has a direct-drive vacuum pump with V-belt without electromagnetic clutch, so the vacuum pump always works even if the screw pump has water., This configuration has no level control, and the speed must be adjusted manually via the throttle lever on the engine., This pump is as basic as you could want... Start/Stop with a switch and the RPM has to be adjusted manually. Equipped with float switching though !, However, the pump unit is completely autonomous and equipped with all the elements that Impulse always offers., It is equipped with its own fuel tank and o ...

used weigher Kemper Imperator, overhauled, with 1 chamber, with lubrication, for small and large weights, hopper for approx. 200 kg dough, hourly output up to 1,500 pieces / h, weight range 200 to 2,300 g

Key data: 100 t, 330 mm, 10 mm

Press Type P 100 RE Pressure 100 ton Free passage between the two uprights 420 mm Slab dimensions 610 x 410 mm Table dimensions 950 x 650 mm Installation height plunger lower 400mm Plunger position 90 mm Stroke rate 55 min Motor power 7.5 KW Weight 7000 kg Press is equipped : - Air coupling - Hydraulic overload protection

Our state-of-the-art VFFS packaging machine is a generalist and has been developed to optimally support companies looking for the highest quality standards. With outstanding workmanship and a wide range of work, our machine offers intuitive operation that optimizes your packaging processes. The extremely powerful motors and the user-friendly colour touchscreen control system give you maximum flexibility during format changes, greatly simplifying your packaging operations. The machine has memory slots for setting the machine parameters. For this packaging line, we also offer fully and semi-automatic feeders including weighing systems, which we can also integrate for you at a later date. If you would like to optimise your packaging processes through a strong production output with high quality, we at Impuls Packaging are your ideal partner. Features of the facility 1. Single fi ...

Originates from a high-profile Pharma manufacturing area. Working Description High quality stainless steel construction 1.2m diameter Rotary Table, full solid Perspex guards. Previously used with CAM LA filling / capping monoblock for smaller glass bottles and vials. Originates from high-profile Pharma manufacturing area. Equipped with sweep arm and additional guides. Control Panel with separate controls for Emergency Stop, Reset, Variable Speed. Technical Info: 230V / 50Hz / 1A

The system is sold in cleaned and tested condition. Availability: immediately Weighing range: from 0.6 to 2.45 kg Operating instructions: available Weight: approx. 650 kg Machine dimensions: approx. 160 x 65 x 140 cm Hopper dimensions: approx. 110 x 110 x 65

bore capacity in steel (diameter): 40 mm throat: 385 mm bore stroke: 200 mm spindle taper MT: 4 turning speed range: 61-1169 U/min table:: 470 x 560 mm total power requirement: - kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 900x800x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...

The ZANASI 40 E model is a reciprocating motion machine designed for the processing and filling of hard two-part capsules, as well as their successive closing and ejection. Possibilities for powder dosing as well as granule dosing. Several powder formats available: Full format: 2,4, Cadence / hour: 40 000 capsules/hour , Positions: 6 , Machine absorption (Kw): 2.2 kW , Elec: 380 V / 50 Hz / 14.2 A

Linear weigher: Gentle and precise filling technology Our linear scale is the ideal solution for easy and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to the minimal drop height, product damage is effectively avoided, which ensures the quality of your goods, even with delicate products. Flexible and efficient operating principle The core of our technology is a simple but extremely effective operating principle: The products are transported via linear conveyor belts or vibratory troughs and dosed into weighing containers in a targeted manner. Features: - Easy operation and cleaning - Convenient control via color touch screen - Storage for various weighing recipes - Precise weighing results thanks to three-stage weighing coarse / medium / fine weighing, individually programmable - Tool-free format changeover. - Intuitive  ...

1 gebr. Kantenbearbeitungsstraße IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Bj. 1996 Bestehend aus: - Doppelseitige IMA COMBIMA für die Längsbearbeitung: Doppelzerspaner 2 x Fräsen Verleimteil mit Granulat-Vorschmelzer 6-fach Rollen-Magazin für das Kantenmaterial 1 x Hauptandruck- und 4 x Nachpressrolle Kappaggregat Bündfräsen 2 x Feinfräsen Profilziehklinge Flächenziehklinge Schwabbelaggregat Glätteaggregat - Drehvorrichtung von läng auf quer - Doppelseitige IMA COMBIMA für Querbearbeitung Schutzfräsen Doppelzerspannen Nutfräsaggregat Verleimteil mit Granulat-Vorschmelzer 6-fach Rollen-Magazin für das Kantenmaterial 1 x Hauptandruck- und 4 x Nachpressrolle Kappen am Oberdruck (Nachrüstung auf aktuelles Modell) Bündigfräsen Feinfräsen 2 x MFA Fräsen Nutfräsaggregat Profilziehklinge Flächenziehklinge Kopierschwabbeln (4 Moto ...

Features - Easy operation and cleaning - Convenient control via color touch screen - Storage for various weighing recipes - Precise weighing results thanks to three-stage weighing coarse/medium/fine weighing, individually programmable - Tool-free format changeover Technical data - Weighing range: 20gr to 4000gr - Accuracy: up to 0.5gr, depending on the product - 6 litre weighing container - Max. speed: 60 weighings/minute - Weight: 240kg - Material: 304 stainless steel - Connection: 220V / 50Hz / 6A

WORKING RANGE, Longitudinal (X) 1250 mm, Vertical (Y) 1000 mm, Transversal (Z) thread axis 380 mm, Drilling depth (V) 1000 mm, Drilling head inclination ( C) +/-20 °, Table rotation (B) 360,000x0.001 °, Workpiece approach (W) 500 mm, CNC, Measuring system optical scales, CNC SELCA 4040D, DRILLING UNIT, Min-max diameter from solid 5-40 mm, Spindle power 10 Kw, Rotation speed 4.200 Rpm, Drilling type gundrill, Drilling head inclination ( C) 40 (+/-20) °, FEEDS, X rapid 10 m/min, Y rapid 10 m/min, Z rapid 10 m/min, V rapid 10 m/min, TABLE, Surface 1000x800 mm, Resolution (B axis) 0.001 °, Tilting +/- 22,5°, Capacity 4.000Kg / d, COOLANT SYSTEM, Tank capacity 650 l, EXTRA, Total installed power 30 Kw, Machine weight 17.500 Kg, Machine dimensions 5000x2600x3300 mm, Information about technical data are not binding., Machine available subject to prior sale.

Features of the facility 1. Chain conveyor belt 2 meters long (other lengths possible on request) 2. Adjustable bag former 3. Single Film Loader + Automatic Film Centering Device 4. Final sealing unit rotative, double-sealing jaw 5. Solid, medium fin sealing structure 6. Three servo control drives 7. HMI Control Panel 8. Two individual temperature controllers 9. 304 stainless steel body 10. Documentation in local language 11. Print mark control 12. Bag length programmable 13. Standard walking direction left to right Technical Parameters 1. Product length: L90-300mm 2. Product width: W30-160mm 3. Product height: H5-55mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material and number of sealing jaws) 5. Maximum film width: 370mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: about 6.5kw 8. Machine weight: ...

RABOLINI IMPERIA C WITH AUTOMATIC FEEDER -Automatic Die cutting machine with Rabolini hot foiling attachment -Year: 1990 -Electromagnetic clutch -Max Sheet Size : 800x1100 mms., Max die cutting size 750x1050 mms. -Control cabin for sheet speed control from 900 / 1600 Sh/hour -Honeycomb plate for hot stamping, 2 chases and frames for die cutting -Three programmable heating zones from control cabin -Rabolini Hot stamping foil unit with programmable pulling rolls -Max pressure power: 280 tons -All parts and accessories -Available in April

This IMAC FL 80-2500 press brake was manufactured in 2009. It features a maximum force of 800 kN and a table width of 2500 mm. The distance between uprights is 1990 mm, and it has a throat depth of 280 mm. With a motor power of 7.5 kW and a weight of 5200 kg, consider the opportunity to buy this IMAC FL 80-2500 press brake. Contact us for more information.

This IMA BIMA 300 was manufactured in 2008. A CNC Wood Machining Centre ideal for diverse woodworking applications. Contact us for more information.

This IMA BIMA 410 V was manufactured in 2005. It is a CNC woodworking machining center with integrated edge banding. Features include a working area of X-axis up to 6000 mm, Y-axis 1400 mm, and Z-axis up to 100 mm. It has a main spindle power of 7.5–11 kW and a speed range of 1,500 – 24,000 rpm. The tool changer has 18 positions. Edgebanding capabilities range from 0.4–3 mm in thickness. Contact us for more information.

This IMA BIMA P480V 180/480 was manufactured in 2001. A CNC Wood Machining Centre ideal for diverse woodworking applications. Contact us for more information.

This 3-axis IMA BIMA 210 120/300 was manufactured in 2006. It features a large axis travel (X = 3000 mm, Y = 1200 mm, Z = 100 mm), accommodating workpieces up to 2800 mm in length and 1200 mm in width. The main spindle delivers power of 7.5 kW with speeds ranging from 8,000 to 24,000 rpm. It weighs approximately 6200 kg and includes IMA IMATRONIC CNC control. Contact us for more information about this machine.

This 3-axis IMA BIMA 310 120/300 CNC Wood Machining Centre was manufactured in 1999. If you are looking to get high-quality woodworking capabilities, consider the IMA BIMA 310 120/300 machine we have for sale. Contact us for more information.

This IMA BIMA CUT 120/240 was manufactured in 2003. A CNC Wood Machining Centre featuring a processing range of X: 4200 mm, Y: 1200 mm, and a maximum clamping height of 100 mm. It includes a main spindle with a tool holder HSK F63 and a drive power of 7.5 KW. The machine also boasts a tool change magazine with 18 places and a variety of drilling and milling capabilities. Contact us for more information about this machine.

This IMA Novimat Contour I/G80/790/L20 edgebander was manufactured in 2009. It is designed for efficient edge banding applications, ensuring precise and consistent results. Ideal for woodworking professionals seeking reliable machinery. Contact us for more information.

This 3-axis IMA BIMA CUT 145/330 CNC Wood Machining Centre was manufactured in 2014. It features a working range of 3300 mm in the X axis and 1450 mm in the Y axis, with a spindle power of 18 kW. The machine includes a tool magazine with up to 18 positions and a vacuum clamping system for secure workpiece fixation. If you are looking to get high-quality milling capabilities, consider the IMA BIMA CUT 145/330 machine we have for sale. Contact us for more information.

IMA Matic 90 Automatic Capsule Filler with 7 sets of tooling - Specs: The machine requires work and service; therefore, it is sold on as seen” / as is”. Available with 7 sets of tooling in excellent – As New condition, with suitable storage cases - for tooling info please get in contact with us IMA Matic 90 capsule filler - technical characteristics: Output up to 90,000 capsules per hour. Capable of filling powders, pellets, and granules - currently set for powder. Including: • Capsule sorter • Vacuum Pump - for capsule separation and cleaning. • Aspiration – Dust Extraction Unit - manages dust collection during the filling process. Matic 90 was the first IMA Italy design for fully automated capsule filling and closing machine - "no operator required" operation once set up. All sanitary stainless steel contact parts. Dosing Method: typically utilizes a do ...

This IMA Advantage 550 was manufactured in 2010. A used single-sided edge bander featuring a jointing cutter, radiant heater, EVA gluing unit, and a roll magazine for edge material. It includes a cutting unit, flush milling top/bottom, and a profile scraper unit. The machine offers a feed speed of 20 m/min, ideal for efficient production. Consider the opportunity to buy this IMA Advantage 550 edgebander. Contact us for more information.

Manufacturer: IMA Model: C23 Year of Manufacture: 1994 Machine type:tea packaging machines Power: 6.7 KW Voltage: 395 V Current: 11.2 A Phases: 3 Frequency: 50 Hz Find more here - / Contact us at -

This IMA Combima complete edge banding line with loading station was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine.

This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. Its equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine.

CONTROLS   CNC controls TECHNICAL SPECIFICATION   Case size: 860 mm   .. x: 620 mm   Adjustment of  x-axis: 350 mm   Adjustment of  y-axis: 250 mm   Erosion stroke: 350 mm   Max. dist. table-electr.clamp.surf.: 520 mm ELECTRICAL SPECIFICATIONS   mains power supply: 8.3 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2700 mm   space requirements -front/back-: 1900 mm   total height: 2600 mm   total weight approx.: 3000 kg Description - Work container can be lowered - C axis for rotation, indexing and erosion - AGIEVISION control incl. TECTRON, AGIESETUP 2D - USER SEQUENCE, SPACETRACK, AGIEPATH with GEOEDITOR - Electrode changer 28 times - Incl. EROWA pneumatic chuck

This edgebander was manufactured in 2005. It is a single-sided combination machine ideal for formatting, edge gluing, and finishing panel-shaped workpieces made of wood or wood-based materials. Features include an automatic insertion table, NC insertion system, and a 12-compartment edge magazine for roll material up to 3 mm thick. It also boasts a variable feed speed of 5-25 m/min and a PC control ICOS open system. For more information about this edgebander, please reach out to us.

This IMA Novimat Systems I/R75/1000 edgebander was manufactured in 2005. It features a robust ICOS OPEN control system, a jointing milling unit with powerful motors, and a versatile multi-functional processing unit for detailed edge finishing. The machine includes a 32-position edge magazine and an advanced gluing unit with an automatic PU melting system. Consider the opportunity to buy this IMA Novimat Systems I/R75/1000 edgebander. Contact us for more information about this machine.

This IMA COMBIMA double-sided edge processing machine was manufactured in 2000. It is a double-sided edge processing unit ideal for industrial furniture production. Features include automatic complete processing of veneer/plastic strips as roll material from 0.4-3 mm and programmable feed speeds between 10 and 40 m/min. Equipped with a BECKHOFF control system and a modern industrial PC with a 21.5 monitor. For more information about this woodworking machine, please reach out to us.

This IMA NOVIMAT I /G80/390/R3 edgebander was manufactured in 2013. It features dual 4.5 kW motors at 150 Hz, achieving speeds up to 9000 rpm. Capable of handling edge heights from 14 to 65 mm and roll diameters up to 850 mm, its ideal for precise edgebanding needs. Consider the opportunity to buy this IMA NOVIMAT I /G80/390/R3 edgebander. Contact us for more information about this machine.

Belt width 1,500 mm, strip thickness 0.5, - 2.0 mm, coil weight 7 tons, straightening rollers 7 pcs. , Longitudinal sliced 4 x , Coil inside diam. 508 mm, coil outer diam.1,600 mm

This edge processing line was manufactured in 1996. It features a robust double-sided edge processing line, including a gluing unit with granulate pre-melter and a 6-position roll magazine for edging material. Equipped with both flush and fine milling capabilities, it also includes a profile scraper and a buffing unit. Ideal for longitudinal and transverse processing, the IMA COMBIMA offers comprehensive functionality for advanced woodworking tasks. For more information about this woodworking machine, please reach out to us.

This single sided edge banding machine was manufactured in 2000. It features a robust Beckhoff control system and operates with a mechanical gear motor for precise workpiece transport. The machine handles various edge materials, including veneer, PVC, and solid wood, with capabilities for both coil and strip ware. It supports a maximum edge height of 55 mm and a panel thickness up to 50 mm. Ideal for detailed woodworking tasks, the IMA COMPACT PC-6220 F machine we have for sale. Contact us for more information.

This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine.

This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine.

General SKU379X941 MakeIntron TypeCeast 9050 Mach.No.9050B18055 Year of construction2019 Main Features MaterialMild steel Motor0.05 KW Specified Features - Miscellaneous MaterialMild steel Motor0,05 kW, 115/230 volt Information LocationBarneveld Floor space1,0 x 0,45 m Total height0,95 m Weight220 kg CEcheck Extra SpecificationsImpact Energy Range: 0.5 J to 50 J (0.37 – 36.9 ft-lb). Display &: Control: Integrated touch panel with embedded PC for test control and results. (as is) :MiscellaneousÌnstronMiscellaneous > MiscellaneousBrand > Ìnstron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine.

General SKU428X1340 MakeIMR LocationBarneveld CEcheck TypeRRM 60 Main Features MaterialStainless steel Motor0.75 KW Specified Features - Tumbler mixer Barrel mixercheck Diameter± 405 mm Speed mixer± 30 rpm Information No.- Year of construction2013 Floorspace1,5 x 1,5 m Total height1,5 mTumbler mixersIMRMixers > Tumbler mixersBrand > IMR What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This woodworking machine was manufactured in 2004. It features a robust 12 kW main spindle with a programmable speed range of 1500-24000 rpm and a tool holder HSK F63. The machine table includes 6 support arms and sets of suction plates, adjustable for various workpiece sizes. Additionally, it boasts a 100 m/min rapid traverse on the X-axis and an 18-fold tool change magazine. For more information about this woodworking machine, please reach out to us.

General SKU257X240 MakeC.G.C. Impianti LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume11630 Ltr. Motor8 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity11.630 l. Vessel sizesDia. 2200X3450 mm Dished bottomcheck ManholeDN400 Top connectionscheck OutletDN35 With jacketcheck Max. temperature190°C With propellor stirrer3-fold Motor8 kW (380 V, 1440 rpm) Speed mixing shaft55-110 rpm Information No.101 Year of construction2001 Floorspace2,70 X 2,70 m Total height4,55 m Weight3800 kgStainless Steel ReactorsNew arrivalsC.G.C. ImpiantiReactors > Stainless Steel ReactorsNew arrivalsBrand > C.G.C. Impianti What you can expect from Foeth: -- Machine is in working condition -- At a reduced  ...

General SKU257X239 LocationBarneveld MakeC.G.C. Impianti Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume11630 Ltr. Motor9 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity11 630 l. Vessel sizesø 2200 x 3450 mm Dished bottomcheck ManholeDN 400 Top connectionscheck OutletDN 35 With jacketcheck Max. temperature190 °C With propellor stirrer3-fold Motor9,0 kW (380 V, 1440 rpm) Speed mixing shaft55—110 rpm Information No.100 Year of construction2000 Floorspace2,70 x 2,70 m Total height4,55 m Weight3800 kgStainless Steel ReactorsNew arrivalsC.G.C. ImpiantiReactors > Stainless Steel ReactorsNew arrivalsBrand > C.G.C. Impianti What you can expect from Foeth: -- Machine is i ...

General SKU347W887 MakeZanchetta / Ima LocationBarneveld CEcheck TypeCyclops Mini Main Features MaterialStainless steel Volume300 Ltr. Motor2.2 KW Specified Features - Tumbler mixer Tumbler mixercheck Capacity30-300 ltr With motor2.2 kW (400 V, 1430 rpm (Ex)) MaterialStainless steel Information No.V2C001 Year of construction2008 With switchgearcheck (0.53x1 m) Floorspace1.90x 1.20m Total height2.24 m Weight1560 kg Extra SpecificationsCapacity of standard containers: 30-300 ltr (containers not included) Recommended filling coefficient: 30-75% Maximum working load (bin + product) 250 kg Rotation speed: 4-20 rpm Tumbler mixersIMA ItalyMixers > Tumbler mixersBrand > IMA Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machin ...

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

This Impulse IP-175 Yamuna piston pump is designed for vertical and horizontal drainage. These positive displacement pumps are self-priming and ideal for pumping unlimited quantities of a mixture of water and air. In addition, this pump can run dry without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , , , Multiple units in stock, , Throughput capacity: 95 m3/h, Motor brand: Hatz 1D81z, Max. delivery head: 22 MWK, Weight: 1950 kg, , Throughput capacity: 90 m3/h, Max dirt passage: 0 mm, Motor brand: HATZ 1D81z, Max. head: 22 MWK, Max dirt passage: 1500 rpm, Weight: 1950 kg, , = More information =, , Year of manufacture: 2026, Applicable material: Water, Empty weight: 1.950 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@ ...