129,235 used machines on RESALE, but how to find them? Machine Search
The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...
Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € ...
IMA OVERWRAPPING MACHINE, MODEL BFB DIVISION 3711 Year of construction: 2016 Production reaches 110 cycles/min handling somewhat larger sized products. Changeover procedures are fast and easy, to avoid unwanted downtime. High quality individual or multiple over wrapping for regular product Complete with a device to lift the film-driving rollers during product elevation These machines enable the use of extremely thin films and avoid the film sliding around the product, thus obtaining the perfect over wrapping finish The equipment uses standard Siemens electrical components and a Siemens PLC. The steel frame is oil-tight and lubrication is by means of oil bath. TECHNICAL SPECIFICATIONS Electrical frequency: Hz 50 Operating voltage: Volt 380 Air pressure: bar 6 DIMENSIONS Net weight: Kg 1500 Length approx.: mm 6400 Width approx.: mm 1735 Height approx.: mm ...
specifications: Up to 400 PCS/MIN, 8 sealing heads, continuous rotary sealer. Vial diameter (mm) DF: Min 14, Max 52. Vials height (mm) HF: Min 35, Max 110. Cap diameter (mm) DC: Min 13, Max 33. Cap height (mm) HC: Min. 6, Max. 16. Power: up to 400 rpm. Standard voltage: 400V - 50 Hz.
Maximum turnerable diameter 1200 mm Maximum permissible diameter 1250 mm Spindle engine power (S1/S6) 55 / 66 Kw Spindle maximum laps 1200 rpm ASA 15" Spindle Attachment Fast speeds 12 m/min X-axis stroke 750 mm Z-axis stroke 750 mm Rated engine torque 20 (X)-20 (Z) Nm Peak engine torque 80(X)-80(Z) Nm Nominal thrust force 1200(X) -120 (Z) N Screw pitch 10 (X) -10 (Z) mm Tools 24 Crown HIRT tool attachment Maximum weight per cell 15 kg Tool change cycle time 10 seconds Maximum weight on tool change ~ 250 Average tool weight ~ 10 Maximum milling tool diameter 150 mm Maximum tool length 350 mm Siemens Sinumerik Control
Post IMA Height: 980 mm with Motor 4,4 kW Motor shaft 35 mm diameter Inner thread M16 left Outer thread 35x1,5 right Price: not reconditioned, from stock Other version available on request
Length: 2700 mm Width: 770 mm Height: 1250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MAIN MOVEMENTS Maximum drilling depth - Z-axis: 500 mm Table, longitudinal movement - X-axis: 300 mm Table, vertical movement - Y-axis: 300 mm Drilling slide, piece support - W-axis: 50 mm DRILLING SPINDLE Drilling diameter without pre-drill, optimal: 3 – 12 mm Distance between the bits: 250 mm Drilling spindle, rotation speed min - max: 0 - 6.000 rpm Drilling spindle motor power: 7.5 kW (S1) Cannon drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Cannon drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING TABLE Fixed clamping table, surface dimensions: 500 x 600 mm Maximum load capacity of the fixed table: 1.000 kg Standard type clamping slots: 18 mm OIL Cutting oil flow rate: 50 lt./min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 lt Adjustable temperature: 27°-30°C DIMENSIONS AND ...
IMS Mammography Giotto Image with the following device components: Tube Varian M-113 SP 0.1/0.3_Bj. 2002 Table top 18x24 and 24x30 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be carried out by a specialist authorised by the manufacturer or technicians!
Manufacturer: Xerox Model: Impika Compact Condition: Used Find more here - / Contact us at -
SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping
Manufacturer: Xerox Model: Impika Reference Condition: Condition Find more here - / Contact us at -
For sale is a used Markem Imaje large print printer 5800, which produces the printed image with wax. It is a conveyor belt and bracket for printer unit and controller. Print speeds of up to 178 meters per minute at approx. 200dpi resolution. Maximum print height per print head of 65 mm (print length flexible). Up to two print heads can be controlled; Print height up to max. 130 mm possible on one side, With Ethernet and USB interface / inputs and outputs freely programmable All-in-one printhead design for space-saving integration.Short heat-up phase max. 20 minutes. Colour touch display integrated in the controller. Printing costs according to Markem Imaje 1450ml = approx. 320 EUR, 400,000 layouts per year, 7267 ml necessary, annual costs of operating resources, estimated: 1,600 EUR Operating costs per tray, estimated: 0.004 EUR SAMPLE CALCULATION / SAMPLE LAYOUT
Used dough divider KEMPER, Type: Imperator CT -In bakery condition- The machine is still being refurbished. Visits and test runs are possible by arrangement.
The depacker enables the unpacking of bottles from the shrink film. PLC SIEMENS S7-300. Output: up to 4 bundles/min.
Kemper weighers Type: Imperator CT large plastic funnel with Siemens analog control with long discharge conveyor with flourer mobile on wheels Year of construction 2013 400 volts / 50 Hz Fuse fuse 16 A
Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.
90KW AND 120KW CURRENCY: MYR If interested, kindly contact Ms. Fatimah (fatimah_asmad@topglove.com.my)
IMA FILLING MACHINE FOR CAPSULES, MODEL HERMETICA 100 Year of construction: 2015 (revision in 2022) Automatic machine for sealing filled capsules. Ideal for the production of liquid or moisture-sensitive products (e.g. probiotics, oils, CBD, collagen, vitamins). Provides tamper-evident protection, improves capsule integrity, and allows the use of liquid, semi-solid, or moisture-sensitive products. Compliant with FDA/GMP, IQ/OQ available. CHARACTERISTICS • Structure: Stainless steel, GMP design • Control system: Touch screen HMI + PLC PRODUCTION • Output: up to 100,000 capsules/h • Capsule material: hard gelatin, HPMC • Capsule sizes: from 4 to 00 (optionally 000)
Hurricane Pulse Filter Model JSS-4 33-300 Capacity 37,500 m³/h Filter area 300 m² 180 pcs filter bags Dimension filter bags 160 x 3300 mm Air-conditioned control cabinet as good as new year 2012 incl. all return air ducts incl. centrifugal fan HF 2/500 – R, 30 kW with 15,700 m³/h incl. centrifugal fan HF 2/550 – R, 30 kW with 19,300 m³/h incl. 1 pcs spare motor 30 kW incl. a complete set of new replacement filter bags incl. 3 Gottwald tubular screws from rotary valve to silo, 1 x 3500 x 194 mm 0.55 kW, 2 x 6,000 or 9,000 x 219 mm 1.1 or 1.5 kW Dismantling can be organized Subject to errors, changes and prior sale
1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)
Used Nail Box (Loose Nails) for Pallet Making Machine; Tilt function for loose nails for separation into the nailing machine (feeding) to the nail guns; Pallet production; functional, functional. not cleaned, not refurbished. Dimensions: 580x810mm Overall width: 760mm Total height: 710 mm Shipping by freight forwarder possible Nail Box IMH Machinery AB nailing box for IMH Machinery AB pallet IMH Machinery AB Year of manufacture 2004 Nail box for IMH pallet nailing machines. Sold in used condition. Dismantled ready for use. Dimensions of the box: 580mm x 810 mm Overall width: 760 mm Total height (not extended): 710 mm Shipping possible with forwarding agent. Asking price: 3250 EUR Nail box for IMH Machinery AB (Pallet production machine) used conditions, ready to work dimensions and condition: see pictures. dispatch / freight possible.
Kemper Dough Weigher Kemper Abwieger Type: Imperator CT large plastic funnel with oil sprayer with long discharge conveyor Adjustable speed with bemehler can be moved on castors Year of construction: 2005 400 volts / 50 Hz Fuse 16 A Height: 185cm Width: 140cm Depth: 70cm
SPECIFICATIONS: Max. cutter diameter mm: 55 Voltage: 380 V
Machine originates from a prominent Pharmaceutical Factory in Europe, and it is in overall excellent condition – little use, serviced and well looked after. Automatic case packer Working Description: Automatic case packer equipped with pre-stacking unit allowing to accommodate high incoming speeds of the individual product / boxes to be packed into cases and built with adjustable, horizontal flat case magazine. This CP-28 BA example is additionally fitted with following: · Infeed belt conveyor adjustable 90mm to 245mm · Automatic product pusher into case · Adjustable case opening and former station · Case closure by tape with 2 taping heads · Control panel with Siemens S7 PLC and Siemens HMI Technical information: Output up to 8 cases per minute within following min / max case sizes: Length: 220mm ...
Workpieces are fed in bulk, checked, bad parts are sorted out and good parts are placed in containers as bulk goods. Workpiece: Bolt, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - high-resolution matrix camera (21 Mp), dimensions - Line scan camera (4K), surface inspection Parts bunker SKAKO, 71 l volume HSMA07903 up to 125 kg in stock Original price: € 230.000,-
--- deutsche Version below --- Stainless Steel Impeller Pump - Pump Type: Hygienic Stainless Steel Positive Displacement Pump with Flexible Impeller - Areas of application: Food, beverage and pharmaceutical industries - Condition: Used, fully functional, in operation until mid-2025 - Maintenance: Regularly serviced, overhauled in 2023 - Design: Hygienic, CIP and SIP capable - Special feature: Rollbar mounted on stainless steel frame Technical data (engine): - Engine manufacturer: AEG - Power: 5.5 kW (50 Hz) / 6.3 kW (60 Hz) - Voltage: 220–240 V / 380–415 V (50 Hz), 240–280 V / 420–480 V (60 Hz) - Speed: 2900 / 3500 rpm - Degree of protection: IP55 - Insulation class: F Technical data (pump): - Material: Stainless steel - Connections: Inlet DN65, outlet DN65 - With extensions: inlet and outlet extended from 60 mm to 80 mm - Spout equipped with 90° bend ...
Scheuch injector for Impulse filters, 160-D-1.10038-V0, TF-VT-INJ-00, Scheuch, new -50% Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a manufacturing plant, has always been stored in a dry place, is new and fully functional. Scheuch injector for Impulse filters, 160-D-1.10038-V0, TF-VT-INJ-00, new, Venturi nozzle for bag filters Pipe inner diameter 87 mm, Trumpet top outer diameter 125 mm, Flange outer diameter 185 mm, Height 212 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect ...
Manual pneumatic press Make IML Model M4 Year 2015 ? Details for all kinds of pressing jobs, for instance eyelets, thumbhole rings, corner attaching, works solely on compressed air Condition show room machine Available Direct
Impeller D.477 with ceramic paint YYKM250RNA/75/CS-5 1-Y400741 for CAPRARI PUMP KCM250TA+180042N1/SF – 496930/2 8211805 - 2 pcs
S. No.: UMF00631 Speed: prints Up to 70 p / m. Counter: Print Total: 1‘618‘150 Equipment / Additional information: - Envelope printing - Stapling - 2 or 4 hole punching - Folding - Three-knife trimmer - Scanning Printing method: color laser printing Print resolution: 2,400 x 2,400 dpi Max. Paper capacity: 7,650 sheets (A4 / A3) Max. Output capacity: 11,200 sheets (A4, 80 g / m²) Possible formats: Paper cassettes 1, 2 and 3: Standard formats: A4, A4R, A5R, A3, SRA3, maximum 330 x 483 mm Multi-purpose tray: Standard formats: A4, A4R, A5R, A3, SRA3, maximum 330 x 483 mm Envelopes: No.10 (COM10), Monarch, ISO-C5, DL Possible grammages: Standard cassettes: 52 to 220 g / m² Multi Purpose Tray / Optional Paper Trays: 52 to 300 g / m² Double-sided printing: 52 to 300 g / m² 2 complete sets of toners THE FOLLOWING NEW & ORIGINAL CANON TONER CARTRIDGES ARE AVAILAB ...
used
Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg
Bread dough dividing machine, Kemper, Imperator T 25 BE
Bread dough dividing machine, Kemper, T 25 BE
Carton Erector Advanced 400 Fully Automatic Net price: 24.500€ Features of the facility 1. Modern design with robot arm 2. Active servo-controlled carton folding 90⁰ 3. Single Magazine Carton Feeder 4. Floor bonding by adhesive tape 5. Five servo control drives 6. Steel structure 7. HMI Control Panel 8. Standard running direction left to right, available in both running directions. 9. Documentation in local language Technical Parameters 1 Product Length: L145-400mm - (650mm on request) 2 Product width: W80-350 mm - (500mm on request) 3 Product height: H150-350 mm - (500mm on request) 4 Packing speed: 5-30 cartons/min 5 Maximum adhesive tape width: max 48 mm - change on request 6 Terminal: 1Ph. 220V 50Hz 7 General power: approx. 2.1 kW 8 Machine weight: approx. 620 kg 9 machine dimensions: approx. 2450 x x 1380 mm 10 Air consumption depends on sp ...
The all-rounder combines outstanding workmanship with a wide range of work. Our machine also offers intuitive operation that optimizes your packaging processes. A high-quality material unwinder with double automatic roll centering ensures precise material guidance. In addition, our active material preference device ensures optimal web tension for flawless packaging results. The extremely powerful brushless motors and the user-friendly color touchscreen control system give you maximum flexibility during format changes, greatly simplifying your packaging operations. The machine has memory slots for setting the machine parameters. Up to 50 different products can be stored. For this packaging line, we also offer fully and semi-automatic feeders, which we can also integrate for you at a later date. The machine is available in both directions and has a rotary cross seal with electroni ...
The machine is usually always in stock with us. Short delivery times are possible here. Features of the facility 1. Chain conveyor belt 2.5 meters long (other lengths possible on request) 2. Adjustable bag former 3. Double Film Loader + Automatic Film Centering Device 4. Rotary final sealing, single-sealing jaw 5. Solid, medium fin sealing structure 6. Four servo control drives - Active material preference shaft - Medium sealing - Final sealing - Conveyor belt 7. HMI Control Panel 8. Three individual temperature controllers 9. 304 stainless steel body 10. Documentation in local language 11. Print mark control 12. Bag length programmable 13. Standard walking direction left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depends on produ ...
The Table Top Print bag packer enables the efficient packaging and sealing of products into pre-made bags and is suitable for various formats. The machine is easy to operate and has a user-friendly display that can be used to set up, save jobs and control operating parameters. For more flexibility, it offers automatic and manual operating modes with a secure sealing rail. The briefing of a packaging employee takes less than five minutes. With integrated thermal transfer printing technology, pouches can be printed directly with high-resolution graphics, text and barcodes, eliminating the need for separate labeling. Features - Multi-color screen for easy adjustment - Number of products to be packed can be set in advance - Integrated total counter of the products (incl. reset option) - Roll change in less than a minute - Welding by foot signal, automatically or by hand pres ...
Bread dough dividing machine, Fabr.Kemper, Type Imperator II - MB
Bread dough dividing machine, Fabr.Kemper, Type Imperator T 25
Rotary lever kneader, Fabr. Imperator - Alkogel
Edge banding machine Manafacture: IMA Model: Molding edge banding machine Year of construction: 1997 Hot air unit for pre-glued edge material
Can depalletizer TMG Impianti Type: PalPaq Model Vega 120 B capacity: approx. 50.000 cph year of manufacturing: 2014 total installed capacity: 13,5 kW, 37,5 A pressure compressed air system min./max.: 6-7 bar compressed air consumption: 330 Nl/min machine dimension: please see layout weight: approx. 6.900 kg for can sizes: Classic 330 ml: D.66,3 h.115 mm - can type: 211 / 202 Classic 500 ml: D.66,3 h.168 mm - can type: 211 / 202 Classic 568 ml: D.66,0 h.177 mm - can type: 211 / 202 Sleek 330 ml: D.58,1 h.145 mm - can type: 206,5 / 202 Sleek 355 ml: D.58.1 h.157 mm - can type: 206,5 / 202 Slim 150 ml: D.53,3 h.88 mm - can type: 202 / 200 Slim 200 ml: D.53.3 h. 111 mm - can type: 202 / 200 Slim 250 ml: D.53.3 h. 134 mm - can type: 202 / 200 pallet size: 1170 x 1240 mm
THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...
maximum number of results exceeded
please refine your search
