il sin used for sale

Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well-preserved single girder suspension cranes Payload 10.000 kg Gauge approximately 17,700 mm Lifting height Max approx. 9,300 mm Make MAN / SWF Year of construction/workshop test 1987 1990/2016 Service life approx. 3 years with SWF monorail trolleys short type, long travel rate programs, freely movable floor control Working speeds: Hoist CA. 0,8/8 m / min Trolley gear approx. 20 m / min Crane chassis approx. 40 m / min

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, new price 150,000 € Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

Complete extrusion line with foster, dispense, extrude, granulate, plummeting to sell. Extruder: Abdullah one shaft extruder, 62 kW motor, suitable for 100-200 kg / h ABS, ASA, PP, 2001. Dosage: A main scale integrated for flakes or granules Cigynvipu Granulation: strand dryer Scheer what 100 BJ. 2002, Stranggranulierer Scheer SGS 100 E4, year 2006 Vacuum pump: Eigenbau Also available: grading sieve, granulate conveying blower, complete steel bagging Tower

380 V, 50 Hz, 0.37 kW, interference test 18 W

Collar shelving, single-sided, 3 m height, 1, 20 m arms, 500 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.150.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 500 kg = 2,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor.

Jig Ingersoll IG750 Bj1992; Travel 500 x 700 x 350 with 6-fold electrode changer for Erowa ITS copper + graphite electrodes.

Control cabinet The offer includes complete control cabinet containing a flat grinding machine with 2 x room cooler Control: Siemens Type: Sinumerik 3 G 1 x Sinumerik 3 G, 6FC 3742-OHA-Z, 24V DC, 100W 1 x SIMOVERT P 6SC6025-1AA01, type D165 D165/25 M5REQ, no. 3203572, output 1 x 25/50A DS 1 x SIMOREG transistor plate, type 6RB 2025-2EA00, ed.: 2 x 25/50A 200V Various circuit breakers, transformers, etc. Sold only to commercial enterprises. All information without guarantee

From checkweigher to filling scale The 1-head scale is the most cost-effective solution for partially automating manual filling. With a reproducible accuracy, the filling speed can be significantly increased. Characteristics of the scale • Easy to use • Quick and easy cleaning • Tool-free (dis)assembly of all product-carrying format parts • Low maintenance • The surface is made of stainless steel • Equipped with automatic vibration • New modular control system • infinitely variable vibration system for an optimal production flow • High accuracy Specifications • Number of weighing containers: 1 • Volume weighing container: 4.5 liters • Bunker volume: 20 liters • Weighing range infinitely adjustable between 20 and 1,000 grams • Accuracy: 0.5-3g depending on the product • Speed: up to 15 weighings per minute, depending on product, adjustme ...

Machine name: BI Pack Manufacturer: OPEM Year of construction: 2006 max speed/power: 200 pads / minute Dimensions: approx. 2m x 2, 3m height: 2m Weight: 1000kg Power supply: 400 v & 50 Hz Compressed air consumption: 0,6MPa Detailed machine function: new double Schlachbeutelmaschineum to for example: coffee pods individually through print mark control in foil to pick. Each bag can be individually printed by the attached printer. 2 seperate treadmills incl. Counter is also available. PLC manufacturer/model: OMRON more info: new price â?¬120,000

Rod lathes Thiel

Condition: Very good condition Available: Immediately

Manufacturer: Lid Type: DE10C Year of construction: 1997 Following the technical data: Table dimensions L x b 390 x 280 mm traverse path: X - axis: 250 mm, Y - axis: 180 mm, Z - axis: 250 mm Table - Quill distance min./max.: 240 / 490 mm Table load: Max: 250 kg

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

7 HARRY LUCAS circular knitting machines for the production of endless single jersey tubular fabric, type RR3-1sPL, with fixed cylinder and rotating cambox with following specifications: 1 machine diameter 1 3/4", gauge 10, 56 needles, 1 system 1 machine diameter 2 5/8", gauge 10, 80 needles, 1 system 1 machine diameter 3", gauge 10, 92 needles, 1 system 1 machine diameter 3 1/4", gauge 10, 102 needles, 1 system 1 machine diameter 3 1/2", gauge 10, 108 needles, 1 system 1 machine diameter 3 3/4", gauge 10, 118 needles, 1 system 1 machine diameter 4 1/2", gauge 10, 140 needles, 1 system

Single head INK-JET printer designed for coding and marking fast moving objects on a conveyor without requiring direct contact 1 to 5 print lines -Three possible applications: Mini (2 lines), Midi (4 lines), Maxi (5 lines) -Prints almost any surface -Prints even at high production speed -Pressure height from 1 mm to 15 mm -Various inks are available for special applications

Index HE 25 with rod feed hydraulically controlled with long turning device

Material: PE, PP, PS, ABS, // Details: DC motor: 93 kW, degassing, screw diameter 115 mm, L/D 26

Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion

with rod pipe

New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand

Rinsing table 1400 x 700 x 900 mm WxDxH 1x Basin left, drip area right Basin size 600 x 500 x 300 mm with cabinet left; right open for dishwasher incl. standpipe valve and drain plug, without syphon Stainless steel flushing center NEW You can find wide machines and equipment in our large warehouse!

Double motor module SINAMICS, 2x3A, 6SLE120-2TE13-0AD0, Siemens, mint condition -40% Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Douple motor module, SINAMICS, 2x3A, 6SL3120-2TE13-0AD0, Siemens, - Input: DC 510-720V 7.2A - Output: 3AC 0-480V 3A/3A 0-550Hz - Control: DC 24V, Brake Output: DC 24V 2A/2A 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liabil ...

Control unit CU320-2 PN. SINAMICS, 6SL3040-1MA01-0AA0, Siemens, mint condition Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Control Unit CU320-2 PN, SINAMICS, 6SL3040-1MA01-0AA0, Siemens, - Digital Outputs 24VDC 0,5A - incl. SINAMICS Control Panel 6SL3055-0AA00-4BA0, Siemens, - incl. SINAMICS S120 Compact flash card, Performance 1, 6SL3054-0FC01-1BA0-Z, Siemens, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in  ...

Used MAX DROP single head shortcake machine. IMPORTANT: the machine was equipped with a bar for lubricating the tops of the dough with fruit filling. Manufacturer HASBORG Rakszawa Poland Year of production 2007 CE mark MAXDROP is a technologically advanced, multifunctional and single-head machine designed for the production of cakes. The machine is adapted to work with steamed, shortcrust, coconut, meringue, sponge cake or muffins with pieces of fruit. Its purpose is to dispense many types of cakes, such as single-color cakes, meringue, spice cakes, coconut cakes, dumplings, matzahs or puff straw and sponge cake tops. MAXDROP is equipped with a head that allows working with semi-liquid and hard cakes. Special rollers, which have milled notches, are mounted in the head. The speed of the rollers is adjustable. Part of the standard equipment of the machine is a bar with rotatin ...

ZRVL-300 M single-stage oil-lubricated rotary vane vacuum pump 3-phase, 7.5kW 300m3/h The vacuum pump purchased for a project and then not used is available unused/as good as new Overview technical data ZRVL Type: M300E - Pumping speed: 300 [m3/h] - Ultimate pressure: 0.1 [mbar abs] - Final pressure gas ballast 0.7 [mbar abs] - Voltage 50 Hz: 230/400 V - Motor 50 Hz: 7.5 kW - H2O compatibility: 5.7 kg/h - Oil volume: 6.5 l - Weight: 200 kg - Sound pressure level: 70 dB (A) Accessories/equipment for the ZRVL series: Inlet filter with filter cartridge made of polyester or stainless steel Oil level switch Inlet pressure gauge Oil temperature switches or transmitters Oil trace heating for outdoor installations with high steam loads (open-cast mining or construction site operation) Versions for oxygen applications Monitoring system for monitoring the conditi ...

Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of continuous strokes per min: 10 The highest frequency of single strokes per min: 7 Closed height: 1180 mm Adjustment of closed height: 200 mm Slider's dimensions: -From left to right: 5000 mm -From front to back: 2000 mm Dimensions of the plate of the die: -From left to right: 5000 mm -From front to back: 2000 mm Capacity of the main drive: 250 kW Overall dimensions: -From left to right: 7640 mm -From front to back: 5980 mm -Height above floor level: 10490 mm

Description: Hydraulic single-column press with cycle feed Type: HEP 100 Specifications Electrical connection: 400 volts/50 Hz +/- 3 % Drive power: 5.5 kW Total power requirement: approx. 6.5 kW Control voltage: 24 volts/50 Hz +/- 3 % Hydr. Max. connection: 210 bar Set: 200 bar Performance data Ram speeds AB: approx. 48 mm/sec. at max. 100 kN compressive force Working speed AB reduced adjustable to: approx. 10 mm/sec. at max. 100 kN compressive force Ram speed ON approx. 96 mm/sec. at max. approx. 50 kN retraction force Plunger stroke: max. 200 mm Flow rate of the pump: approx. 15 l/min.

Winterhalter GS 502 Basket Push-Through Machine The Winterhalter GS 502 rack pass-through machine offers you all the necessary basic features that a rack pass-through dishwasher must have. You benefit from a consistent hygiene concept with a deep-drawn tank, surface radiator and screening system. Thanks to the concentrated cleaning power, Winterhalter guarantees hygienically clean washing results, even with heavy soiling. Specifications: Theoretical power: 60 baskets per hour Dimensions (width x depth x height): 635 x 749 x 1469 (canopy open 1932) mm Entry height: 420 ± 5 mm Working height: 850 mm Basket dimensions: 500 x 500 mm Fuel tank capacity: 42 l Rinsing water requirement per wash cycle: 2.4 l Tank temperature: 60°C Boiler temperature: 85°C Required water flow pressure: 1 bar Total connected load with hot water connection > 40°C: 9.5 kW Total connected lo ...

weight max.: 2 t stroke: 4000 mm clamping width: 9200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Hoist DemagBridge traveling craneAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 2 t stroke: . mm clamping width: 5600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 43 ONLY BRIDGEIN LIFTING GEARAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t stroke: 7000 mm clamping width: 17508 mm Height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t stroke: . mm clamping width: 18000 mm Height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The AutoDoor AD100 is a powerful, electrically operated door opener for CNC machines with a stroke of 1000 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD100 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

faceplate diameter: 1800 mm turning height: 1600 mm turning diameter over bed: 2150 mm turning speeds: 3,15 - 250 U/min voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The AutoDoor AD150 is a powerful, electrically operated door opener for CNC machines with a stroke of 1500 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD100 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm stroke of ram - solid: 750 mm Side head: 650 mm turning speeds: 4-210 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.