135,933 used machines on RESALE, but how to find them? Machine Search
Age 1988:- Technical data ILLIG STAL 80 The ILLIG STAL80 can work Inline with any Thermoformer, or it can be used Off-Line as a stand-alone Trim Press. In Stock at our Warehouse in Enger, Germany, Punching table area max: 1000 x 510 mm, Material width max: 800 mm, Infeed length: 20 – 400 mm, Stroke height: 200 mm, Mold height: 272 mm, Punching pressure: 20 000 daN, Drive capacity: 4.16 kW, Total length: 3950 mm, Total width: 2385 mm, Weight approx: 3600 Kg
ILLIG PLS75b Inline Counter/ Stacker, with Hole Punch Station, age 2006, works Inline with an ILLIG RDM75K for Cups, Flower Pots, Coffee Capsules etc., Max. Stacking Area: 750 x 350 mm, Min Height of formed product: 25 mm, Max. height of Formed Product: 150 mm, Min. dia. of product : Ø 40 mm, Max. dia. of Product: Ø 150 mm, Max. length of Product Stack: 730 mm, Output rate of Product Stacks: 1200 Stacks/ hr, Rotating Head to neatly remove Products from the Thermoformer Mold with integrated suction, Inline Hole Punch Station, Inline Counter Stacker Station, Compressed Air: 0.2 L at 6 bar, approximately, Total Drive Rating: 19 kW, Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE), Cross delivery conveyor station for counted cups., All Motors are Indramat Servo Motors, Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls, Siemens S7 PLC Controls, Delivers Count ...
ILLIG SZS73 Counter/Stacker, Age 2007, Consisting of :-, Siemens S7 PLC Controls Indramat Servomotor Siemens SINAMICS Motor Drive Rittal Control Cabinet Cooling Unit with Temperature Display With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production condition !, This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line., Effective Working Area: 740 x 340 mm, Max. Part Height: 150 mm, Formed Part Stacking Length: 800 mm
Used ILLIG STAL80 Trim Press, age 2004:-, Technical data ILLIG STAL 80 :, Punching table area max. 1000 x 510 mm, Material width max. 800 mm, Infeed length 20 - 400 mm, Stroke height 200 mm, Mold height 272 mm, Part height (positive and negative) max. 100 mm, Number of strokes (infinitely variable) 25 - 130 /min, Trimmed Parts are stacked through the Punch Tool, The Skeletal Waste is fed directly into the Grinder, Punching pressure 20 000 daN, Drive capacity 4.16 kW, ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, Condition: v.good, The ILLIG STAL 80 age 2004 has the following features:-, The Trim Press can be synchronized with a Thermoformer, Servomotor Indexing of sheet, Laser control Technology for accuracy in the Hole Punch position, Condition: v.good
REF-2662 ILPRA FOODPACK SPEEDY V/G TRAY SEALER Automatic tray sealer. Manufacturer: ILPRA. Series: FOODPACK. Model: FP SPEEDY V/G. Serial no.: FP7291. Year: 2006. Busch vacuum pump. Inert gas. Voltage: 400 V. Max. production (only sealing): 10 cycles/min. Current mould type: 2 round trays of 110 mm diameter. Overall dimensions (mm): 2,870 x 900 x 1,600 (LxWxH). Weight: approx. 700 kg.
A cylinder roll punching machine Adolf Illig is available. Pass-through width: approx. 850mm, pass-through height: approx. 120mm, roll diameter: approx. 190mm, table dimensions X/Y/Z: 2x approx. 1200mm/1200mm, working height: approx. 800mm, machine dimensions X/Y/Z: approx. 2700mm/1350mm/1550mm, weight: approx. 900kg. An on-site inspection is possible.
Production line is in good condition
Manufacturer: MiSeq Model: Illumina Year of Manufacture: 2015 the device has performed 472 runs so far. Electrical Information - Line Voltage: 100V–240V - Frequency: 50/60Hz - Power Consumption: 400W Find more here - .ucymachines/ Contact us at - sales@ucymachines
Machine name: Packaging machine used (thermoforming line) Manufacturer: Adolf Illig Type: SB 53C - DIN Year of Make: 1990 Drive motor: 1.24 kW Dimensions: L 1,600 x W 1,135 x H 2,710 mm Curb weight: 500 kg Tech. Documentation: Yes Remark: Heating capacity: 4.5 kW (15 ceramic surface emitters) Vacuum system: Degree of vacuum max. 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Drawing depth positive: 150 mm Drawing depth negative: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (Skin) Film roll core diameter: 70 mm Condition: Used Price: On request
General SKU114Z459 LocationBarneveld Main Features MaterialStainless steel Volume1000 Ltr. Specified Features - Silo Silo(1x) Closedcheck Capacity1000 Ltr Diameter950mm Cylindrical height1400mm Conical height1200mm Flat topcheck Top connectionsdia. 200mm + 235x300/560mm Outletdia. 300mm (with valve) MaterialStainless steel 1.4301 (304) General Makeunknown Floorspace1,2x1,2 M Total height3,0 MPaints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganic-Industries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > RubberIndustries > Chemical > Agroc ...
ILLIG RDM75K Thermoformer age 1998, refurbished in 2019 with Siemens S5 PLC Controls, used only for ca. 50,000 hrs, Consisting of:, ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023., Brief refurbishment details are as follows:-, - Illig replaced the main camshaft with a new reinforced main camshaft & the chassis on which the shaft under the mo ...
An untested Ilmenauer laser marking machine including a TBH extraction unit is available. 1) Laser marking machine Ilmenauer Laserzentrum GmbH ILZ LBS 01, year of manufacture: 2000, laser class: 1. 2) TBH LN 200 extraction unit, year of manufacture: 2000, air volume flow rate: 250m³/h, motor power: 1.2kW, machine dimensions X/Y/Z: approx. 1000mm/400mm/400mm, weight: approx. 50kg. On-site inspection is possible.
Used ILLIG VHW 72/2 Preheater with 2 x electrically heated rolls. Width 720 mm. 380V 50 Hz 3 ph. Heating Capacity 30 kW. Motor 0.18 kW. Total Amps 48 A. Max. Temp. 130.
REF-2665 ILPRA FS 2500 V/G AUTOMATIC CUP FILLER-SEALER Manufacturer: ILPRA Series: FILL SEAL Model: FS 2500 V/G FL Serial no.: FS1071 Year: 2017 Automatic rotary filling-sealing machine for cups of different materials. Compact and flexible model, tailored to handle a diverse range of food products from liquids and creams to granules, even with solid particles in suspension. Maximum output of approximately 2,500 pieces per hour. Voltage: 400 V + N Overall dimensions (mm): 2,350 x 1,280 x 2,200 (LxWxH) Weight: approx. 900 kg
Inline ILLIG RDKP72g full Servomotor 4-Station Thermoformer, age 2010, Double Heating Oven, Top heater 37,1 kW, Bottom heater 37,1 kW, Bosch REXROTH Indexing Servomotor, Form Station with Toggles and Servomotors on both Top and Bottom Form Plattens, Forming area with pneumatic clamping frame max. 671 x 535 mm, Material width with/ without sprung clamping frame max. 805 mm, Material thickness (varies with material type) max. 2.5 mm, Material transport accuracy ± 0.2 mm, Feed length max. 553 mm, Feed length min. 150 mm, Moulding height above material level, max. 120 mm, Formed part height beneath material level max. 120 mm, Total formed part height max. 120 mm, Sheet Sag Control, Transport Rail auto-spreading for PP, Servomotor Hole Punch Station, Servomotor Steel Rule Die Punching Station, Servomotor Stacking/ Counting Station, Cycle rate max. 40 rpm, Total electrical connection - Standa ...
ILLIG RDM70K Mold, dia. Ø70 mm, for PP Cups, 21 Cavities, age 1995, with 1 set of inserts and Stacker basket with Rods with Brushes. Missing engraved Cup bottom discs, as these are the intellectual property of the previous owner.
ILLIG RDM70K Mold for Ø75 mm dia. PS Cups, 21-Cavities, with 1 set of inserts, no Stacking Basket, age 1995. missing engraved Cup bottom discs, as these are the intellectual property of the previous owner. Very sparingly used !
Offered is an ILLIG HSA 30 RD - high-performance continuous sealing machine for blister packaging: blister films: PVC, PET APET/PETG, PS, film thickness: 150µm-600µm, lid materials: heat-sealable cardboard, aluminum composite films, Tyvek, sealing area X/Y max. approx. 500mm/300mm, forming depth max. approx. 100mm, 8-18 cycles/minute. Inspection possible by arrangement. Available starting June 2026.
Bagging machine manufactured by TMI, model ILERSAC HLG. Technical characteristics Model ILERSAC HLG Year of manufacture 2012 Transportation Information Weight 3000 Kg Manufactured by TMI
bag length: ca. 700 mm bag width: ca. 500 mm work impulse: - total power requirement: 10,2 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 2 2 2 m Movie: https://www.youtube.com/watch?v=TGGMb3B2UG0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU327X680 LocationBarneveld CEcheck MakeIlmvac Pressure Working pressure0.0005 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume63000 Ltr. Motor2.4 KW Specified Features - Vacuum pump Pumpvacuum Number of pumps:1 Capacity70 m³/h With motor2,40 kW, 400 V, 1365—1440 rpm InletDN35 OutletDN35 MaterialNickel alloy (201) 2.4068 General Type321022 / U 4.70F/K Mach.No.113807 Year of construction2011 Floorspace0,80 x 0,37 m Total height0,30 m Weight60 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherVacuum pumpsSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfec ...
Pressure blower, radial fan, high pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: VEB ILKA, radial fan extraction fan -Type: IRHMF160 / 2 see photo type plate -Engine power: 3.4 kW / 2900 rpm -Volume flow: 0.242 - 0.694 m³/s -Inlet: Ø 160 mm -Connection output: 250 x 160 mm -Fan wheel: Ø 500 mm -Dimensions: 780/490/H1030mm -Weight: 88kg
fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Manufacturer: VEB ILKA, axial fan axial fan -Type: S4D350-AF10-17 -Motor: 25 W 1380 rpm -Voltage: 220/380 V -Dimensions: Ø 380 x 140 mm -Weight: 4.0 kg
electric clutch brake, clutch/brake combination, clutch-brake combination for strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping machine -Manufacturer: Bonfiglioli, drive unit from packaging machine ILAPAK Astra-STD -Type: GFF 200014/112 EE B3 -Motor: 24 VDC / 35 W -Individual components: see photos -Dimensions: 345/180/H230 mm -Weight: 22 kg
Spindle lifting gear, linear drive, linear gearbox, lifting gear, spindle lifting element, spindle drive, electric actuator, valve drive, actuator, actuator motor, strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, spindle lifting gear for stretch wrapping system -Manufacturer: SITI, spindle lifting gear from ILAPAK Astra-STD packaging machine -Transmission: Type MI 30 H9 -Shaft: Ø 20 x 270 mm -Motor: ICME 0.09 kW -Dimensions: 395/265/H120 mm -Weight: 7 kg
Gear motor, electric motor, electric gear motor, spur gear motor for strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping system -Manufacturer: Bonfiglioli, drive unit from packaging machine ILAPAK Astra-STD -Gearbox: Type W63 U P80B14 i= 30 -Motor: 0.75 kW -Speed: 46.6 rpm -Individual components: see photos -Dimensions: 480/350/H250 mm -Weight: 22 kg
Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Ilmvac, Vacuum pump rotary vane pump -Type: 302313-02 P 12 D -Drive: ATB 0.55 kW / 1320 rpm -Suction capacity: 11.0 m³/h -Dimensions: 480/220/H265 mm -Weight: 28.4 kg
An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible.
A film wrapping machine Heine Ilsemann is available. Materials: polypropylene/cellophane/PVC/coated paper, output: 200cycles/min, connected load: 8kW, machine dimensions X/Y/Z: approx. 3500mm/1100mm/2000mm, weight: approx. 2200kg. An on-site inspection is possible.
Aircooled chiller/Heat pump CIAT AQUACIAT2 ILDC 240V 61.5 kW/64.1 kW Cooling capacity: 61.5 kW / 17.49 tons (12/7 — 35°C) Heating capacity: 64.1 kW / 18.23 tons (40/45 —7°C) Year of manufacture: 2015 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP137KCE-TFD-455 (scroll) Type of refrigerant: R410a Number of fans: 1 pcs. Hydraulic module: 1 pcs. water pump, expansion vessel. Dimensions: 2x1.06x1.75 m. Weight: 660 kg. Working hours: 6660/6659 h. Condition: Good
ILLIG RDM 70K Line, age 2000, Auto-Unwind stand, Preheater ILLIG VHW72, 2-Roll Preheater, Indramat Servo Motor Indexing, with ELAU Touch Pad Operator Control Panel, with display, Top & Lower heaters, total connected load top & bottom heaters 74.2 kW, Sheet Sag Control, Auto Transport Rail Spreading for PP, Max. material width 730 mm, Max. Indexing length 300 mm, Max. Forming Area 680 x 280 mm, Drive Motor 6.93 kW, Hydraulic Plug Assist, Max. Part height 125 mm, Hydraulic Power Pack, Inline ILLIG SZ73 Counter/ Stacker, Inline ILLIG RS75b Grinder (age 2003) with Control Panel & Regrind Blower., Siemens S5 PLC Controls, 400 V 3 ph 50 Hz, Line is running with PP., Continually well maintained !, Can be inspected in production
B+S/Heino Ilsemann Labelling & blister packing line for ampoules and vials comprising: Bausch + Ströbel ESA 1025 high output self-adhesive labelling machine suitable for ampoules/vials, object diameter up to 36 mm, object height up to 140 mm, output up to 370 1ml.-ampoules/vials per minute and up to 290 5ml.-ampoules/vials per minute direct transfer of the ampoules to Heino Ilsemann BMP-400 blister machine for ampoules in blister without lidding foil, automatic feeding system for placing the ampoules into the blisters, max. drawing depth 35 mm, max. forming width 270 mm, max. usable punching area 250 x 180 mm, punching cycles max. 40 per minute, capacity up to 320 blister per minute. includes format parts for DIN-ampoules of 1, 2, 5 and 10 ml. and vials with a diameter of 16 and 22 mm.
General SKU235U235 MakeIlchmann TypeDTSF 2x200x6.525 Mach.No.CRO 0348 Year of construction2014 Main Features Motor3 KW Length6525 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4571 (316Ti) Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter200 mm (2x) Length6525 mm Between inlet and outlet5880 mm Shaft diameter108 mm (x) Pitch200 mm Inlet630x350 mm Outlet350x350 mm Max. temperature90 °C With adjustable packing glandscheck Motor3 kW, 220-230 volt / 380-400 volt, 1456 rpm Screw speed31 rpm With coverscheck Information LocationBarneveld Floorspace8,3x5,1 m Total height0,49 m Weight1250 kg CEcheck Extra SpecificationsCapacity: max. 5 m³/hOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyR ...
PET Coextrusion + Inline ILLIG RDKP72g Thermoforming Line, Age 2010, this equipment is suitable for PET, PP & PS Trays, Fruit & Vegetable baskets etc. :-, Inline S Plastic SRL PET Coextrusion line to produce pet sheet in-line with ILLIG RDKP72g 4-Station Thermoformer (hole punch station) Age 2010 :, Maximum output 680 kg/ hr, Maximum sheet width 800 mm, The line was originally purchased for €1.8 million., The line includes:, Electrical Control Panel, MSM Plastic Engineering Gravimetric Feeder, fed directly from the PET Dryer + additional Component for masterbatch or additive, Main extruder Model ED 100-40 dia. Ø100 mm, L/D 40, BP Plast BDO X2 100 Double plate hydraulic screen changer, MAAG Gear pump, Co-extruder Model E60-40 dia. Ø60 mm, L/D 40 with Gravimetric feeder, BP Plast Single plate hydraulic screen changer, MAAG Gear pump, 3- Layer (ABA) Melt Feed Adapter, Special extrusion ...
An entire system is being sold! The collection consists of Tango tapping, Ilapac Carrera 500 PC flow-wrapping machine, Mettler Toledo Chekweight and Espera labelling. The system is fully functional and serviced
SHORT ROD AUTOMATIC LOADER IRCO BREUNING ILS – RBK 100 With servo drive Year 2006 Material length: 1200 mm Material diameter from 0 to 5 mm – max. 0 to 102 mm
Description Item # 9165 - BAGGING MACHINE Manufactured by ILAPAK Model Vegatronic VT2002/300S Was running on Stabilo Packs of 140grammes With a SmartDate X40 Coding Unit 230Volts, 3Phase, 60Hz.
Automatic Rim Roller for cups ILLIG BAG 50b, age 2013 only used very sparingly for 2 to 3 years, Technical Data:, Hourly cup throughput max. 68000, Hourly cup throughput min. 6800, Total motor rating 1.5 kW, Total Heater Rating 11,4 kW, 380V 3ph 60/ 50 Hz, Max. Cup dia. Ø 130 mm, Min. Cup dia. Ø 50 mm, Other details as per attached ILLIG Datasheet.
The Ilpra FS 6000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Make: Ilpra , Model: FS 6000, Capacity: 4800, Year of Manufacture: 2003, Filling Volume: 50-500 ml per cup , Cup Dispenser: Automatic twin dispenser , Filling: Twin Filling Heads , Filling Specs: Fruits up to 1 cm pieces , Sealing: Twin Heat Sealing Station , ...
Ilpra traysealer, model: 1403 V/G, serial machine: Foodpack, serial number: FP7177, year of construction: 2008, 380 V, film width: 400 mm, dye: (8x) 170 mm x 150 mm, total dimensions traysealer: 4200 mm x 1400 mm x 1400 mm, Kumpiapu outfeed belt, type: FNB-8SS, serial number: 440X3110, belt width: 440 mm, total dimensions outfeed belt: 1500 mm x 800 mm x 1000 mm, infeed conveyor with tray denester, belt width: 80 mm, 320 mm and 400 mm, total dimensions tray denester: 2900 mm x 1300 mm x 1860 mm. Technical condition unknown.
Frequency converters, frequency converters, drive converters, controllers, inverters -Manufacturer: Siemens, Sinamics Power Module 240 -Input: 3 AC 380-480 V 31.5 A 50/60 Hz -Motor: IEC 7.5/11 kW -Dimensions: 340/190/H290 mm -Weight: 12.7 kg
Machine control, monitor, Sinumerik, line control -Manufacturer: SIEMENS, Sinumerik line control central device -Type: Sinumerik 805 6FC4100-OAA-Z -Dimensions: 510/300 / H100 mm -Weight: 5.2 kg
SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...
SINGLE SHAFT SHREDDER 150 kw (or 180 kw), sturdy structure in electro-welded steel, cutting chamber dimensions mm. 2000x1000, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 + 75 kw optional 90 + 90 kw, hydraulic unit power 11 kw (15 HP), transmission by belts, 1 rotor, rotor diameter 480 mm., rotor length 2000 mm., 122 reversible tools, 4 usable tool sides, 8 upper fixed blades, 8 lower fixed blades, 73 average rotor revolutions/min., weight 13000 kg, production 3500-5000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 1000 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 150 kw or 180 kw, width: 2. ...
SINGLE SHAFT SHREDDER 75 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1300x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 kw (100 HP) optional 90 kw (120 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1300 mm., 80 reversible tools, 4 usable tool sides, 5 upper fixed blades, 5 lower fixed blades, 73 average rotor revolutions/min., weight 6200 kg, production 2500-3500 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 75 KW, width: 1.300 mm. 51.18
SINGLE SHAFT SHREDDER 55 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1100x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 55 kw (75 HP) optional 75 kw (100 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1100 mm., 66 reversible tools, 4 usable tool sides, 4 upper fixed blades, 4 lower fixed blades, 73 average rotor revolutions/min., weight 5500 kg, production 1200-2000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 55 kw
VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, 60 mm screen (or bespoke), control panel, good working conditions, Constructed in 11-2001, Users manual, electrical drawings, CE compliance., offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: May 2026, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric
Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg
maximum number of results exceeded
please refine your search
5.000 € 
