il sin used for sale

- Brand: SILMISA - With hydraulic pusher - Model No.: MSA.30.126 - Year: 2008 - Power: 75 hp (55 KW) - Cutting chamber: 1260 x 900 - Blade: 40 x 40 mm - With electric panel

This 3-axis CHARMILLES ROBOFORM CT 400 was manufactured in 1996. It features X-axis travel of 450 mm, Y-axis travel of 320 mm, and Z-axis travel of 410 mm. The tank dimensions are 1195x800x400 mm, supporting a maximum workpiece weight of 800 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM CT 400 machine we have for sale. Contact us for more information.

This 4-axis Mitsubishi EA 12S die-sinking EDM machine was manufactured in 2016 in Japan. It features X/Y/Z travels of 400/300/300 mm, a maximum workpiece weight of 700 kg, and a stainless steel table measuring 700 × 500 mm. Equipped with a C-axis and Erowa chuck, it also includes a dielectric filtration system with a 400 L tank. Consider the opportunity to buy this Mitsubishi EA 12S die-sinking EDM machine. Contact us for more information about this machine.

Year: 2007 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - angle-adjustable crank - pressure reducer

This 3-axis AGIE AGIETRON Innovation 2 die-sinking EDM machine was manufactured in 2002. It features a robust AGIEVISION control system, a 28-position electrode changer, and a C-axis for rotation, indexing, and erosion. The machine can handle workpieces up to 650 x 580 x 250 mm and 400 kg. It boasts a high-performance AGIE IPG generator with a removal rate of 450 mm³/min for copper/steel. Consider the opportunity to buy this AGIE AGIETRON Innovation 2. Contact us for more information.

This Mitsubishi Electric SG12M die-sinking EDM machine was manufactured in 2020. It features a robust 3750 kg weight, with a maximum workpiece weight capacity of 1000 kg. The machine includes a dielectric fluid chiller unit and a dual paper filter system, ensuring optimal operational conditions. The working tank has an automatic elevation system and hinji open-door for ease of use. If you are looking to get high-quality die-sinking capabilities, consider the Mitsubishi Electric SG12M machine we have for sale. Contact us for more information.

This 3-axis CHARMILLES HD10 start hole drilling machine was manufactured in 2002. It features a work table size of 600x300mm, XY-travel of 350x250mm, and can handle a maximum workpiece weight of 450kg. Ideal for precise erosion tasks, the CHARMILLES HD10 machine we have for sale represents a robust addition to any machining setup. Contact us for further details regarding this machine.

This 4-axis Exeron EDM 310 MF20 was manufactured in 2006. Ideal for precision die-sinking applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the Exeron EDM 310 MF20 machine we have for sale. Contact us for more information.

Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible.

This 3-axis Zimmer+Kreim Genius 700 Magic 3 was manufactured in 2009. It features a table with T-slots, dimensions of 575 x 500 mm, and a 24-position electrode changer. The machine can handle a maximum workpiece weight of 700 kg and offers a travel range of 400 x 350 x 350 mm. Consider the opportunity to buy this Zimmer+Kreim Genius 700 Magic 3 die-sinking EDM machine. Contact us for more information about this machine.

This Sodick AD 55 L die-sinking EDM machine was manufactured in 2016. It features a work tank with internal dimensions of 1200 x 800 x 500 mm and a capacity of 470 liters, supporting a maximum workpiece weight of 1000 kg. Equipped with a cooling unit for the linear motor, a C-axis, and a SGF generator unit, it offers robust performance for precision applications. Contact us for more information about this machine.

CONTROLS   CNC controls TECHNICAL SPECIFICATION   Case size: 860 mm   .. x: 620 mm   Adjustment of  x-axis: 350 mm   Adjustment of  y-axis: 250 mm   Erosion stroke: 350 mm   Max. dist. table-electr.clamp.surf.: 520 mm ELECTRICAL SPECIFICATIONS   mains power supply: 8.3 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2700 mm   space requirements -front/back-: 1900 mm   total height: 2600 mm   total weight approx.: 3000 kg Description - Work container can be lowered - C axis for rotation, indexing and erosion - AGIEVISION control incl. TECTRON, AGIESETUP 2D - USER SEQUENCE, SPACETRACK, AGIEPATH with GEOEDITOR - Electrode changer 28 times - Incl. EROWA pneumatic chuck

This 6-axis VOLLMER QXD 250 grinding machine was manufactured in 2017. It features a robust 3 Phase 380Volts, 50hz, 8.7KVA power supply and a substantial coolant tank capacity of 310 liters. With a machine weight of 7,200kg and comprehensive axis movement, including a 360-degree swivel angle on the A-Axis and +/-20 degrees on the B-Axis, consider the opportunity to buy this VOLLMER QXD 250 grinding machine. Contact us for more information about this machine.

Extrudeuse CM EVOLUTION PLAST type CM-EVO 230 Année. : 2019 Puissance : 50 KW Tension : 400 VOLTS Poids : 4000 KG

This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features a stroke of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine can handle workpiece weights up to 1000kg and dimensions of 1000 x 700 x 400 mm. It includes a dielectric unit with a 750l capacity and a robust weight of 4400kg. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine.

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

This 3-axis AgieCharmilles CABINET FORM20 die-sinking EDM machine was manufactured in 2012. Ideal for precision mold making and tooling applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles CABINET FORM20 machine we have for sale. Contact us for more information.

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 20 mm, 25

single-screw laboratory extruder Collin E 20 M Output capacity: max. 5 kg/h (depending on material and processing conditions) Screw diameter: 20 mm, L/D = 25 Screw suitable for processing PE/PP (condition: excellent) Heating capacity cylinder: up to 300 C incl. mass pressure and temperature sensor Incl. motorized lifting device for the height adjustment of the processing unit incl. material funnel incl. clamping flange for nozzle attachment Total connected load: 17 kW Dimensions (L x W x H): 1,450 x 800 x 1,900 mm Weight: 300 kg Note: including complete documentation Condition: used, function-tested

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Equipment: Insulation, agitator,Condition: used,Volume: 125,000,Lower floor: flat floor with slope,Design: upright,Standing form: Standing frame,Insulation: available,Material insulating jacket: Painted steel,Diameter outside: 3,900,Cylindrical height: 11,000,Total height: 12,800,Wall thickness underbody: 4,Wall thickness cylinder: 4,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet : 65,Note: Pressure points on the insulating jacket, last use: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),agitator:

Key data: 75 mm, 30

Single Screw Extruder Cincinnati TALOS 75-30G Output capacity: max. 450 kg/h (depending on material and processing conditions) Screw diameter: 75 mm, L/D = 30 Screw geometry for processing HDPE/PP 11 x Tool Zones incl. TC Type J ITIB 3-pin Thermal Probe incl. mass temperature and pressure sensor Interface for succession via CAN Open Bus Machine control Cincinnati EXcXP-touch Drive power main motor: 125 kW Total connected load: 178 kW Machine weight: 2,200 kg Remark: incl. spare engine (used) without material hopper Condition: used, function tested

Very nice 2003 Uniloy single station with double view-stripe head W.Müller CD125mm Machine never runs in production. Comes from a technical college for training students Current condition is very well and runs perfectly

Key data: 500 mm, 400 mm

Roboform 350 + Erowa Robot Compackt 44-Fold Electrode Changer This die-sinking EDM machine offers precise machining with a wide range of features. Details: Year 2006 Travels: X/Y/Z 350 x 250 x 300 mm Minimum power consumption: 5 kVA Maximum electrode weight: 25 kg Accessories: incl. Erowa zero-point clamping system on table WITHOUT electrode holder

Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible.

Equipment: Insulation,Condition: used,Volume: 100,000,Design: upright,Stand form: Stand frame,Insulation: available,Material insulating jacket: Painted steel,Insulation thickness: 100,Diameter outside: 3,800,Total height: 11,000,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Spray head,Last purpose: Food / dairy,Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No,Current interferer: No,Agitator arrangement: on the side of the cylinder,Bottom bearing: No,Power interferer: No

This 3s Sodick AG55L die-sinking edm machine was manufactured in 2008. With a magazine capacity of 32 positions and a maximum workpiece weight of 1000 kg, it offers robust capabilities for precision machining. The X travel reaches 550 mm and Y travel extends to 400 mm, making it suitable for various applications. Consider the opportunity to buy this Sodick AG55L die-sinking edm machine. Contact us for further details.

This 3-axis CDM Rovella BF 600 die-sinking EDM machine was manufactured in 1997. It features a 1400x700 mm working area and comes with equipment included. If you are looking to get high-quality die-sinking capabilities, consider the CDM Rovella BF 600 machine we have for sale. Contact us for more information about this machine.

This 3-axis ONA DB300 die-sinking EDM machine was manufactured in 2006. It features an X-axis travel of 300 mm, Y-axis travel of 200 mm, and Z-axis travel of 250 mm. The work table dimensions are 400 x 300 mm, with a maximum workpiece weight of 200 kg. If you are looking to get high-quality die-sinking capabilities, consider the ONA DB300 machine we have for sale. Contact us for further details.

2 x die-sinking EDM machines Maho Hansen HS 350 E and HS 300E built in 1990

This 3-axis Exeron EDM 313 was manufactured in 2012. It features a control type 313 and operates with advanced software including exoUI V2.0.0.40. The machine has a total of 17,633 operating hours, with 7,830 hours on the control. If you are looking to get high-quality die-sinking capabilities, consider the Exeron EDM 313 machine we have for sale. Contact us for further details.

GT-5313 1-Spindle Extruder - Brand: PAGANI - Model: 75/ 30D-B - Spindle: Ø 75 mm - With electrical panel - Engine: 103 hp (77 kW) - Year 1995

This 3-axis CHARMILLES Roboform 350 die-sinking EDM machine was manufactured in 2006. It features travel paths of 350 x 250 x 300 mm and can accommodate a maximum electrode weight of 25 kg. The machine has a power consumption of 7.5 kVA and weighs 2350 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 350 machine we have for sale. Contact us for further details.

GT-5315 1-Spindle Extruder - Brand: FLAG - Ø 120 mm - 2.2 meters long spindle - With 75 hp (55 KW) engine - No electrical panel

Shredder of the leading company LINDNER model: KOMET 1800 single shaft number of knives 50pcs. Ideal for SRF/RDF (paper, plastic, fabric, wood), accompanied by the electrical panel and the control panel. Drive motor: 200Kw ABB 400V/50Hz Hydraulic unit: Dorninger-Heavy Duty 1:65lt/min ,Drive Capacity:11Kw The machine is in excellent condition, being sold due to replacement with a new more advanced model.

GT-5343 Single Spindle Co-Extruder - Diameter: 40 mm. - Spindle length of 700 mm - 4 HP (3 kW) geared motor - Electrical panel with variable speed drive

GT-5350 Single Spindle Extruder - Brand: FLAG - Diameter: 120 mm 25 L/D - Spindle length: 3 meters - Extruder electrical panel

GT-5353 Single Spindle Extruder - Brand: FLAG - Diameter: 120 mm 25 L/D - Spindle length: 3 meters - Extruder electrical panel

GT-5354 Single Spindle Extruder - Brand: FLAG - Diameter: 100 mm 25 L/D - Spindle length: 2.5 metres

GT-5355 Single Spindle Extruder - Brand: FLAG - Diameter: 80 mm 25 L/D - Spindle length: 2 meters - Extruder electrical panel

GT-5359 Single Spindle Extruder - Brand: REIFENHAUSER - Type: EH 650-1-90-25 - Diameter: 90mm 25 L/D - Spindle length: 2.4 meters - Extruder electrical panel - No motor

GT-5361 Single Spindle Extruder - Brand: REIFENHAUSER - Type: RH-381-1-70 - Diameter: 70 mm 25 L/D - Spindle length: 1.8 meters - Extruder electrical panel

- Brand: REIFENHAUSER - Type: RH-381-1-70 - Diameter: 70 mm 25 L/D - Spindle length: 1.8 meters - Electrical panel

Key data: 100 t

For sale is a hydraulic single-column press (C-frame) from the manufacturer Durendus with an adjustable press force of up to 100 T. The machine has a table size of 800 × 600 mm, a maximum installation height of 700 mm and an adjustable stroke of up to 500 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. Here are the technical data of the offered machine: Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Title: Hydraulic Single Column Press - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15–100 T (adjustable) - Max. installation heigh ...

This 3-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine.

Year of manufacture 2004 for 5 - 10 litre containers Clamping force: 100 kN Wall thickness control: 64 points Max. product diameter: 115 mm Cavities: 1 x 3 Center distance: 125 mm Machine is in good condition, and available immediately

This 3-axis HUBER OCT-3020 NA die-sinking EDM machine was manufactured in 2006. It features a travel of 300 mm in the X-axis, 200 mm in the Y-axis, and 350 mm in the Z-axis, accommodating workpieces up to 460 x 210 x 200 mm. If you are looking to get high-quality die-sinking capabilities, consider the HUBER OCT-3020 NA machine we have for sale. Contact us for further details.

Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible.