il sin used for sale

Single column - eccentric press PELS - RICHTER type PEKR 125Masch. No. 20684 Year of construction 1967Compressive force 125 ton. Projection 430 mmTable size 1100 x 750 mmPlunger area 890 x 650 mmTable opening 400 mmStroke adjustment 6 to 115 mmRam adjustment 100 mmInstallation height largest stroke top max. 450 mmClamping pin bore 50 mmStroke rate 60 strokes/min. Table height above floor 900 mmMotor power 7.5 kWNerg connection 380 volts, 50 Hz- overload protection by crushing plate in the plunger- compressed air

Single column hydraulic press SCHÖN type TES/CBbuilt in 1977Compressive force 63 ton. (160 bar)Projection 320 mmTable size 600 x 770 mmPlunger area 600 400 mmPlunger stroke 125 mmInstallation height max. 400 mm (with intermediate plate on the ram)Slide speed Rapid traverse downwards approx. 180 mm/sec. Ram speed work approx. 25 mm/sec. Pushrod speed upwards approx. 180 mm/sec. Table height above floor 870 mmDrive power 22 kWNet connection 380 volts, 50 HzTank capacity approx. 280 litres Hydraulic oil

Single column hydraulic press SCHULZ type SES 250Masch.Nr. 04.86.3511/3 Year of manufacture 1986Compressive force 25 ton. Retraction force 10 toProjection 360 mmTable surface 600 x 720 mmPlunger area 500 x 500 mmFailure opening in table 100 mmPin hole 40 mmPlunger stroke 400 mmInstallation height max. 600 mmTable height above floor 935 / 775 mmTank capacity hydraulics 380 litresDrive power 7.5 kWNet connection 380 volts, 50 Hz- Fixed stop adjustment in the press cylinder 180 mm- Light barrier

Clamping Table, Sinusoidal Table, Swivel Clamping TableTable Length: 1130 mmTable Width: 300 mmTable Height: 112 mmFolding Angle: 2Folding Angle: max. 7- Folding Angle 2 via Threaded Spindle Folding Bracket max. 7 manually raised to the stopOverall Dimensions L x W x H: 1450 x 300 x 112 mmWeight: 275 kgGood ConditionClamping Plate, Ideal for Making Wedge Strips; used

Single-column eccentric press MÜLLER GEFREES type PDET 5 S/EKMasch. No. Year of manufacture 1988Compressive force 5 ton. Projection 125 mmColumn passage 170 mm Table surface 280 x 220 mmWaste height 90mmLifting area 160 x 100 mmLifting adjustment 4 to 40 mmRam adjustment 30 mmInstallation height largest stroke at the top max. 210 mmStroke rate 200 strokes/min. Clamping pin bore 25 mmTable height above floor 900 mmEngine power 0.55 kWNerg connection 380 volts, 50 Hz- pneumatic clutch-brake combination-

Z640 Mixed Lot (134 pieces) Feed Pliers Automatic Lathe Lathe Turning Center probably for Index Traub or Schütte or similar machines

Inv. Num. : 8601 Type: DV 40 W Producer: HAMM Generated: Parameters: Speed: 12 km/h Cylinder width: 1200 mm Length: 3310 mm Height: 2610 mm Width: 1425 mm Machine weight: 4100 kg

CINCINNATI PROTON 45-30G Attention: Machine in left-hand version Screw diameter: 45 mm, L/D = 30 Grooved catchment zone Motor (DC drive): 65 kW Screw speed: max. 320 rpm Tool zones: 4+1 for adapters Melt pressure & temperature sensor included EXcPRO-NT control incl. CAN bus for data communication Air conditioner for control cabinet Cylinder in bimetal design – condition: very good Screw with few operating hours – condition: very good Without material funnel & without adapter

We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.

pressure: 20 t throat: 200 mm stroke: 0 - 50 mm table:: 360 x 550 mm table:: 140 mm - Bohrung no. of strokes: 160 Hub/min bore: 35,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 240 mm total power requirement: 2,2 kW weight: 1.250 kg range L-W-H: 1310 x 1250 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 200 mm stroke: 0 - 60 mm table:: 400 x 600 mm table:: 150 mm - Bohrung no. of strokes: 140 Hub/min bore: 40,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 300 mm total power requirement: 3,0 kW weight: 1.670 kg range L-W-H: 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 160 mm stroke: 0 - 40 mm table:: 270 x 370 mm table:: 100 mm - Bohrung no. of strokes: 200 Hub/min bore: 25,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 180 mm total power requirement: 0,75 kW weight: 590 kg range L-W-H: 1.168 x 1.010 x 1.670 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 t

Sale due to switch to eccentric press Pressing force 100 tons Loading depth 360 mm Stroke 500 mm Daylight 800 mm Plunger area 530 x 400 mm Table height above floor 710 mm Working speed 10mm/sec Approach speed 150 mm/sec Return speed 150 mm/sec Required power 17 kW Dimensions L x W x H 1,400 x 2,000 x 3,200 mm Weight of the machine approx. 5.1 t Year of manufacture 2001 Price is net, VAT can be claimed. Loading facilities available All information without guarantee

Max. saw blade diameter: 400 mm Pneumatic material tensioners

pressure: 63 t throat: 260 mm stroke: 8-100 mm ram - range of adjustment: 63 mm no. of strokes: 115 Hub/min : 316 mm table surface area: 630x490 mm ram surface: 315x260 mm hole in the table: Ø 140 mm total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock# UG6388 Little used single screw extruder by Farmet (CZ) model FE100 WE Clever Max. Machine can reach output in range from 90-130 kg/h. Power consumption 16 kW. Includes water pump, die cutting knife, some toolings. Local control panel with plc controls. Previously tested on animal food production. Dims: L 195 cm x W 102.5 cm x H 178 cm x weight 600 kg.

Single Column Press Dunkes TYPE: HZS 160 Specifications: Manufacturer: Dunkes Model: HZS 160 Operating hours: approx. 2250 The machine is in good condition and fully functional.

A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.

Holzzerkleinerer ( Holzhäckler ) maschine modell MION MOSOLE TR 2 gebrauchte maschine Maschinenbedienung im Automatik- und/oder Handbetrieb modus Arbeitsbedingungen: ausgezeichnet Im Automatikbetrieb startet der Motor in die entgegengesetzte Richtung, um den Stopfer von eventuellen Rückständen vorheriger Arbeiten zu befreien. Im Vollautomatikbetrieb stoppt der Motor nach ca. 5 Sekunden und startet erneut in die richtige Richtung für eine kontinuierliche Bearbeitung (siehe Video). Technische Daten : hydraulischer Schieber Breite Rotor mm.700 Durchmesser Rotor mm.300 Drehzahl Zerkleinerungseinheit 100 U/min Trichterinhalt 3.42 m³ Hauptmotor PS 25 Hydraulikaggregat Motorschieber PS 1 auswechselbare Messer Beschickung von oben

Charmilles Form 20 Tabledimensions / T slots : 398,8 × 299,7 mm Tank dimensions: 208,2 L Longitidinal displacement X-axes: 300 mm Transversal displacement Y -axes: 200 mm Vertical displacement Z-axes: 250 mm Max weight on table: 350 kg

WASHING LINE for PLASTIC SCRAPS, for 350-550 kg/h average capacity depending on contamination and material, material loading screw conveyor with hopper, equipped with vibrating motor, made of stainless steel, stainless steel tank size 5,0 x 1,5 x 2,0 mt. complete with 2 horizontal skimming screw conveyors for material handling. 8.2 kW, 50 Hz., horizontal screw conveyor at the bottom + diagonal screw conveyor for extracting sunk material, stainless steel safeti grate on the upper part, diagonal material collection drainage screw conveyor, drying centrifuge, material extraction fan, electrical panel, the line was built in 2008 and is offered completely reconditioned

Komptech Terminator 5000 SD Category: Garbage Shredders Specification: Category: Universal Waste Shredder Serial / reference number: 481148 Power: 446 hp / 328 kW Weight: 27 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-Crushing Unit Armoured rollers – new Sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control

Offer 25374 Specifications: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 1000 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 3250 x D 1850 mm - Weight approx. 4600 kg

Height=0.82 m, Overall length= 1.01 m, Overall width= 1.12 m, In store Made in Denmark Description Capacity of 800 – 1000 trays per hour 3 main brushes for cleaning made of polyamide 2 brushes for cleaning of perforated trays All brushes can be adjusted individually to prolong the lifespan Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes The whole machine can be cleaned with water External oil container with sight glass and circulation pump Mobil scrapings container

Screw Diameter: 75 mm // Throughput: 700 kg/h

Screw Diameter: 35 mm // Output Capacity: 25 kg/h

Screw Diameter: 160 mm // Output Capacity: 1400 kg/h

Screw Diameter: 100 mm // Output Capacity: 600 kg/h

Screw Diameter: 65 mm // Output Capacity: 170 kg/h

Doppstadt DW 3060 D Single-shaft pre-shredder Equipment: MTU R 1100 EUROMOT IV diesel engine, 320 KW Total weight: approx. 25,000 KG 18-channel radio remote control Rear hinge 5.5 m, hydraulically foldable Comb extension Humidification device 21 roll teeth Form C DoppLock quick-change system 20 comb teeth trapezoid Overbelt magnet Hopper Elevation Service Details The machine is in very good technical and visual condition The machine receives a brand-new planetary gearbox before delivery Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.

1 YAMADA Single End Sizing Winding machine Mod. YS-6 12 spindles year of construction 1998 with YAMADA TFB meter counter on each spindle squeeze roller sizing application type non-touch yarn break control sensor on each spindle take-up cylindrical traverse 150 mm (6 inch)

Key data: 22 mm, 60

Single screw extruder 60 with renewed PMA control in 2010 - was replaced by double screw 5 years ago. Works after oil and belt change

CONTROLS    AGIEVISION TECHNICAL SPECIFICATION   Table-size          : 600 mm   Table-size          : 450 mm   Adjustment of  x-axis: 350 mm   Adjustment of  y-axis: 250 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 6000 kg Regular service by AGIEOperating hours: 122'829hEroding hours: 23'101h SW disks available

Item condition: in working order Availability: immediately Table and sink: included Original price 2023: €28,000.00

: neu : ca. 4 Monate ab Auftragse : Italien : 120000 € : 2268 € : 300 to : 500 mm : 1000x500 mm : 1200x800 mm : 600 mm : 400 mm : 22 mm/s : 2 mm/s : 7.5 kW : 2300 mm : 1500 mm : 3100 mm : 11200 kg 4-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve � ...

Year: 2018 technically efficient, ready to work – after full service motor power: 2.2 kW disc diameter: 400 mm (cross-cut) machine head can be moved 45° to the right and left head tilt 45° to the left pneumatic profile clamps pressure reducer cooling system

CONTROLS   CNC controls WORKING RANGE -CUBIC-   X-axis travel: 250 mm   Y-axis travel: 160 mm   Z-axis travel: 250 mm TECHNICAL SPECIFICATION   Table-size          : 480 mm   Table-size          : 330 mm   Adjustment of  x-axis: 250 mm   Adjustment of  y-axis: 160 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1200 mm   space requirements -front/back-: 1200 mm   total height: 2500 mm   total weight approx.: 1000 kg Equipment: -Agietron Compact 1 30A/C-axis / DAI 1-P -AGIE Fuzzytron -14" color screen -Fire extinguishing system -3-compartment electrode  ...

This 4-axis PENTA 1060 CNC die-sinking EDM machine was manufactured in 2014. Ideal for detailed and precise metalwork, it offers advanced control and efficiency. Consider the opportunity to buy this PENTA 1060 CNC die-sinking EDM machine. Contact us for more information.

This AgieCharmilles FORM 30 was manufactured in 2014. A robust die-sinking EDM machine, its ideal for detailed and precise metalwork. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking edm machine. Contact us for more information.

This CHARMILLES ROBOFORM 51 Erosion machine was made in 1998. The machine has a table size of 750x500 mm.

This 3-axis CHARMILLES ROBOFORM 35 die-sinking EDM machine was manufactured in 2000. It features low working hours and comes with additional accessories including various UPC pallets, tool holders, a Diebold shrink wrapping machine, and a cooler. Consider the opportunity to buy this CHARMILLES ROBOFORM 35 die-sinking EDM machine. Contact us for more information.

This Sodick AG60L Die-sink EDM machine was manufactured in 2012. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1500 kg. The machine includes a linear motor, glass scales, and a remote control for enhanced precision and ease of use. Consider the opportunity to buy this Sodick AG60L die-sink EDM machine. Contact us for more information about this machine.

pressure: 40 t stroke: 150 mm serial number: 100091 : 2 : Druck & Hub verstellbar pressure: 25 t weight: je 1,5 t safety light frame: ja bei beiden The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis AgieCharmilles FORM 30 die-sinking EDM machine was manufactured in 2016. It features X, Y, and Z-axis movements of 600 mm, 400 mm, and 400 mm respectively, and a C axis for enhanced versatility. The table measures 800 x 600 mm, supporting workpieces up to 1000 x 700 x 400 mm. Weighing 4200 kg, consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for further details regarding this machine.

This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine.