igm robot used for sale

A complete IGM welding system with robot is available. Robot: IGM RTI 2000, roller stand: IGM RB 300, positioner: IGM RP 300, control system: PLC/KUKA K C2, total system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. The 6th axis of the machine can no longer be controlled. Documentation available. An on-site inspection is possible. Expected to be available in May 2026.

Key data: 3 , 2000 kg, 2500 mm

Description, subject to prior sale Robot type: IGM RE 497-S in hanging Position Control: full digital PC-Robotcontrol, Type RCE Software: WIN 10 & Linux based System + igm Robot software K6 Welding process: 135 (GMAW), single-wire, Ø1.2 mm Welding power source: digital Invert Welding Power Source TPS 500i (500 A at 40% duty cycle) Robot periphery: Rotating boom for floor installation with 2.5 m boom length No. of Working-stations: 1 Working station: 3-axis L-Manipulator with lifting device with 2 tons nominal load capacity Security Technology: Pistol-Security-Shut-down in wrist axis Emergency Stop on Hand tablet, on Manipulators and Control Panel three-coloured warning light for the operating Status partition Security Door Technical indications, subject to error.

IGM-Welding-Station IGM Robot Designation: Rti 330 Year of construction: 2005 1st welding unit Manufacturer: Fronius Hoist no.: 4,0750,100 Designation: Transpuls Synergie 4000 2nd welding unit Manufacturer: Fronius Hoist no.: : 4,075,097,R Designation: Transpuls Synergie 4000 Extraction system Manufacturer: Füchtenkötter Designation: FKPF 64/4 V Year of construction: 2005 Find more here - / Contact us at -

Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machin ...

Manufacturer: IGM Model: RTE 497-S Year of Manufacture: 2021 Technical Specifications Robot System - Control system: Fully digital PC robot control, type RCE - Software: Windows 10 & Linux-based system with IGM robot software K6 - Welding process: 135 (GMAW), single-wire, wire diameter 1.2 mm - Welding power source: Digital inverter welding power source TPS 500i - Output: 500 A at 40% duty cycle - Robot periphery: Rotating boom for floor installation, boom length 2.5 m - Number of workstations: 1 Workstation - 3-axis L-manipulator with lifting device - Nominal load capacity: 2 t Safety Equipment - Pistol safety shut-down in wrist axis - Emergency stop on hand tablet, manipulators, and control panel - Three-colour warning light for operating status - Safety partition - Safety door Robot Dimensions and Performance - Travel path: 5,000 mm - Arm length: 2,500 mm - Lift: 1,000 mm - ...

Qty. 1 Second-hand robot welding unit Mfc.: IGM Robotersysteme GmbH Built: 2020 Type: 1D04+BP The development of welding parameters and the fabrication activities are executed utilizing a robot cell, a manipulator for component movement and a seven-axis robotic system. Component parameters max. component weight 6.5 t processable node dimension 3x3x3 m wall thickness: 10-70 mm Welding Cell Area: 10 x 12 m The welding unit is still in operation until mid of August 2024. This unit has been used only for research projects only and therefore it is in very good condition.

System Components: Main Control Cabinet - Voltage: 3 × 400 V ±10% - Frequency: 50 Hz - Rated Power: 34.2 kVA - Current: 49.4 A - Fuse: 80 A (gG) - Protection: IP 54 - Type: RCE - Weight: 500 kg - Year: 2020 - Standards: EN 60204-1, EN 61439-1/2 Positioner / Workpiece Manipulator - Type: RPT_05000AR6D PL - Weight: 1800 daN - Year: 2020 - Enables PA/1G optimal positioning - Rotational Axes: 7 - Repeatability: ≤ 0.15 mm Dust Extraction Unit - Model: Dustec 4 XL - Power: 5.5 kW - Voltage: 400 V / N / PE - Air Supply: 6 Bar - Filter Class: M - Year: 09.2020 Welding Technology - Process: MAG (1-wire) - Wires Supported: Solid and flux-cored (Ø 1.0–1.6 mm) - Arc Modes: Short, spray, pulse, long - Power Source: Fronius TPS 600i - Process Optimization: Task-specific Robot & Sensor Periphery - Automatic torch changer - TCP calibration - Internal variable access for diagnostics - On ...

Inductive sensor, electronics sensor -Manufacturer: IFM, inductive sensor -Type: IGM207 -Number: 2x sensors available -Price: per piece -Dimension rolled up: 150/150/H20 mm -Weight: 0.3 kg/piece

DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer: Kählig, DC geared motor -Type: M63x60/I SN31 IGM4/2 -Voltage: 110V -Torque: 324 N/cm -Speed: 120 rpm -Technical data: see photo of the type plate -Shaft: Ø 10 x 25 mm -Number: 15 motors available -Price: per piece -Dimensions: 220/90/H100 mm -Weight: 2.6 kg/pc.

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Type: M63x22/I SN31 IGMi12/2 -Voltage: 24 V -Torque: 108 N/cm -Speed: 340 rpm -technical data: see photo type plate -Shaft: Ø 10 x 28 mm -Number: 4x engines available -Price: per piece -Dimensions: 170/100/H100 mm -Weight: 2.0 kg/piece

Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.

internal diameter: 200 mm grinding depth: 80 mm swing diameter: mm stroke of the table: X= 300 mm stroke of the table: Y= 500 mm control: FANUC 18i-TA total power requirement: 7 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,950x2,330x1,640 m O K A M O T O High-Precision Internal Cylindrical Grinding Machine with FANUC CNC Control, System 21 i – TA, 2-Axis Simultaneous Machining For machining bores, end faces, and outer diameters in a single setup TECHNICAL DATA Internal grinding diameter: (6) - 100 mm Grinding depth approx.: 80 mm Max. table stroke: X-axis 300 mm Z-axis 500 mm Swing diameter over table: 600 mm Swing diameter in chuck cover: 260 mm Table speed: (X/Z-axis) 0.1 - 10,000 mm/min Swivel angle of workpiece spindle: -5 to +15 degrees Smallest input increment: X-axis 0.0001 mm Z-axis 0.0001 mm Workpiece spindle speed: 100 - 850 rpm Grinding spindle speed ...

Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum ...