igm robot used for sale

A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible.

Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece  ...

Manufacturer: Servent Model: OTC-IRB-AX-V 6 L Year of Manufacture: 2006 Machine Type : Welding robot System type: Robotic MIG/MAG welding system MIG/MAG power source: OTC DP 400 Positioners: 2 x S40.1-4 / 1000 kg Linear track with gantry: S80.1-4 / S70.1 Travel length: 8000 mm Electrical connection: 3/N/PE, 400 VAC, 50 Hz, 100 A CE marked System configuration: - Overhead-mounted 6-axis robotic arm on 8 m linear track - Robot controller: OTC Daihen - Control software upgraded from AX-C to AX-2 - 2 welding stations - Each station equipped with 1-axis positioner - Positioner load capacity: 1000 kg - Positioner torque: 1000 Nm Welding equipment: - Power source: OTC DP 500 - Duty cycle: 100% at 350 A - Duty cycle: 60% at 500 A - Push-pull welding torch - Water-cooled gas nozzle - Wire feeding via roller liner - Torch alignment gauge included Sensors and automation: - Touch sen ...

Six-axis industrial robots for floor mounting Suitable for all tasks with a checkpoint or path. The main areas of application are: spot welding, handling, assembly, application of adhesives, sealants and preservatives, machining, MIG/MAG welding, YAG laser welding. Nominal load: 125 kg Additional load at nominal load: 90 kg Maximum total load: 215 kg Complete with control Last maintenance September 2022.

Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Switch-on hours: 12800 h Operating hours: 6000 h Axle number: 6 Max. horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg

Manufacturer: Kuka Model: KR 120 R2700-2 Year of Manufacture: 2022 Weight: 120 kg Reach: 2701 mm Installation: Floor mounted Remarks: Robot disassembled from PIM - milling automation, including pedestal and grippers with assembly flanges Find more here - / Contact us at -

Inv. Num. : 8913 Type: IRB 1600/1.45-8/M200 Producer: ABB Created: 2013 Parameters: Maximum arm reach: 1450 mm Number of axles: 6 pieces Maximum load capacity: 8 kg Machine weight: 250 kg

Inv. Num. : 8914 Type: MA 1400 - DX 100 Producer: Yaskawa Created: 2012 Parameters: Maximum arm reach: 1434 mm Number of axles: 6 pieces Maximum load capacity: 3 kg Machine weight: 130 kg

Hello I offer an ABB IRB 6700-245/3.00 robot from 2018 for sale here. Sale against bid. Robot complete with controller and teach pendant.

Reconditioned 5 axis robot CMA mod. ROBY 5EX-G - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate RETROFIT 2025

This FANUC ARC Mate OiB robot arm was manufactured in 2015. It features a maximum load capacity of 3kg. Consider the opportunity to buy this FANUC ARC Mate OiB robot arm. Contact us for more information.

industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Electric power: 3kw 50 Hz 380v year of manufacture: 2008/06 Weight: 100kg

This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information.

This OMRON Quattro 800HS with Platform P30 robot arm was manufactured in 2021. It is designed for precise and rapid handling tasks in various industrial applications. Contact us for more information.

This 6-axis STAUBLI RX90B robot arm was manufactured in 2003. Ideal for automation tasks, it offers precision and flexibility in a variety of industrial applications. Consider the opportunity to buy this STAUBLI RX90B robot arm. Contact us for more information about this machine.

This KOVACO SP 50 DP was manufactured in 2015. It features a robust welding positioner with a table size of 1200x1800 mm and a capacity of 5000 kg. The stroke reaches up to 1200 mm, and it offers a tilt range of 0-90 degrees and full table rotation from 0-360 degrees. Consider the opportunity to buy this KOVACO SP 50 DP welding robot. Contact us for more information about this machine.

This STAUBLI TX2-160 LHE was manufactured in 2023. A robust robot arm, ideal for precise and efficient automation tasks. Contact us for more information about this machine.

This 6-axis KUKA KR 100-2 HA 2000 was manufactured in 2007. It features a TRUMPF TruDisk 6002 laser with a power range of 120–6000 W and a wavelength of 1030 nm. The robot arm is mounted on a KSL-2000/2700 linear axis, enhancing its operational flexibility. If you are looking to get high-quality welding capabilities, consider the KUKA KR 100-2 HA 2000 machine we have for sale. Contact us for more information about this machine.

This KUKA KR 6 R700 sixx robot arm was manufactured in 2018. It features a maximum load capacity of 6 kg and a reach of 706 mm, complemented by a KPC4 smallsize robot controller. Consider the opportunity to buy this KUKA KR 6 R700 sixx robot arm. Contact us for more information.

This 6-axis KUKA KR 6 R900 fivve was manufactured in 2014, featuring a maximum reach of 901.5 mm and a payload capacity of 6 kg. It operates efficiently with a cycle time of 155 cycles per minute and has been used for 18000 hours. Ideal for tasks requiring precision and speed in challenging environments, it maintains a protection rating of IP54. If you are looking to get high-quality robotic arm capabilities, consider the KUKA KR 6 R900 fivve machine we have for sale. Contact us for more information.

This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine.

This 6-axis FANUC LR Mate 200 iD 14L robot arm was manufactured in 2022. It features a lightweight controller at 40 kg, operates on 200-230 V~ AC, and is designed for single-phase power with a consumption of 1.2 kVA. It meets CE, EMC, and EN55011 (Group 1, Class A) safety certifications. Consider the opportunity to buy this FANUC LR Mate 200 iD 14L robot arm. Contact us for more information about this machine.

This STAUBLI TX60 robot arm was manufactured in 2016. It is in very good condition, almost like new, with only 344 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI TX60 robot arm. Contact us for more information.

This 6-axis ABB IRB 2400 M2004 robot arm was manufactured in 2007. It features a maximum handling weight of 10 kg and an impressive reach of 1.55 meters, with a total weight of 380 kg. If you are looking to get high-quality automation capabilities, consider the ABB IRB 2400 M2004 machine we have for sale. Contact us for more information.

This 6-axis COMAU C3G robot arm was manufactured in 2000. It features a weight of 890kg and includes two units: one operational and one for parts. Ideal for complex automation tasks. Contact us for more information about this machine.

This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4 touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine.

This 6-axis FANUC CRX-20iA/L robot arm was manufactured in 2024. It features a maximum load capacity of 20 kg and a reach of 1418 mm. The robots joints have extensive motion ranges, enhancing its flexibility for complex tasks. If you are looking to get high-quality automation capabilities, consider the FANUC CRX-20iA/L machine we have for sale. Contact us for more information.

This 6-axis FANUC R2000iB/165F robot arm was manufactured in 2013. Ideal for automation tasks, it enhances precision and efficiency in production lines. Consider the opportunity to buy this FANUC R2000iB/165F robot arm. Contact us for more information.

This RETHINK sawyer robot was manufactured in 2018. It features a maximum reach of 1260 mm and a gantry reach of 900 mm, with a typical tool speed of 1.5 m/s and a payload capacity of 4 kg. Ideal for a variety of automation tasks, the sawyer robot we have for sale offers advanced flexibility. Contact us for further details regarding this robot.

This KUKA KR270 R2700 C ultra MED robot arm was manufactured in 2015. Ideal for precise automation tasks, it offers robust performance and reliability. Contact us for more information.

This 6-axis KUKA KR16-2 robot arm was manufactured in 2017. It features a payload capacity of 16 kg and a maximum reach of 1650 mm. Versatile mounting options include floor, inverted, or angled setups. Ideal for material handling, assembly, welding, and more. Weighs approximately 280 kg. Compatible with KUKA KR C2 or KR C3 series controllers. Contact us for more information about this machine.

This KUKA KR 90 R3700 prime K robot arm was manufactured in 2018. Ideal for automation tasks, it offers flexibility and precision for various industrial applications. Consider the opportunity to buy this KUKA KR 90 R3700 prime K robot arm. Contact us for more information.

This 4-axis EPSON LS3-401S robot arm was manufactured in 2018. It features a maximum operating speed of 6000 mm/s for joints #1 and #2, and a payload capacity up to 3 kg. Ideal for tasks requiring high speed and precision, it operates efficiently with a standard cycle time of 0.42 seconds. Consider the opportunity to buy this EPSON LS3-401S robot arm. Contact us for more information about this machine.

This 6-axis COMAU C4G RCC3 robot arm was manufactured in 2004. Consider the opportunity to buy this COMAU C4G RCC3 robot arm. Contact us for more information.

This DENSO RC8A was manufactured in 2018. It features a robotic cell with two SCARA robots, each capable of a maximum reach of 550 mm and a Z-axis stroke of 320 mm. The system includes a controller RC8A, offline programming software, and self-diagnostic functions. Ideal for applications requiring high-speed robotic manipulation. Contact us for more information about this machine.

This 6-axis FANUC M-16iB robot arm was manufactured in 2005. Ideal for automation tasks, it enhances precision and efficiency in operations. Consider the opportunity to buy this FANUC M-16iB robot arm. Contact us for more information.

This KUKA KR 240-2 2000 robot arm was manufactured in 2009. It features a robust 6-axis system capable of handling a maximum total load of 640 kg, with an arm length of 1100 mm. Ideal for complex automation tasks, this robot arm can be installed on floors or ceilings, enhancing versatility. A great opportunity to buy this KUKA KR 240-2 2000 robot arm. Contact us for further details regarding this robot arm.

This STAUBLI RX160 was manufactured in 2016. It is a robot arm in very good condition, almost like new, with only 373 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI RX160 robot arm. Contact us for more information.

This 3-axis KUKA KR8 R2100-2 arc HW was manufactured in 2019. Ideal for precise and efficient automation tasks, this welding robot is a robust option for industries requiring high reliability and performance. Consider the opportunity to buy this KUKA KR8 R2100-2 arc HW welding robot. Contact us for more information.

This KUKA KR120 R3200 PA was manufactured in 2014. It features a software version V8.3.11 and has approximately 21,000 operating hours. It includes a Smartpad KCP, weighs 1075 KG, and can handle loads up to 120 KG with a range of 3195 mm. Contact us for more information about this machine.

This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine.

This 6-axis STAUBLI RX160 L robot arm was manufactured in 2017. It features a maximum load capacity of 28 kg and a reach of up to 2010 mm. Equipped with a CS8C-RX160 controller and a robot stand, it offers high flexibility with motion ranges up to ±270° on several axes and speeds reaching 870°/s on Axis 6. Ideal for tasks requiring precision and range. Contact us for more information about this machine.

This KUKA KR-90 R3100 was manufactured in 2016. It includes a floor bracket, control, and an ENGEL CC300 control cabinet – easix. With 3871 operational hours, it has been maintained by Engel. Dimensions for the robot are 2100 x 1000 x 2150mm, and the control cabinet measures 800 x 600 x 1300mm. It weighs 1092 Kg and can handle loads up to 90 Kg with a range of 3096 mm. Contact us for more information about this machine.

This 6-axis Yaskawa Motoman ArcWorld was manufactured in 2014. Ideal for versatile setups, it features a maximum load capacity of 6kg and a working range of 1440mm. A great addition to any production line, the Yaskawa Motoman ArcWorld robot we have for sale is a robust choice. Contact us for further details regarding this automation equipment.

Key data: 2 , 10

New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...

This 6-axis KUKA KR 6 R1820 Robot was manufactured in 2019. It excels with a maximum reach of 1820 mm and a rated payload of 6 kg. Versatile mounting options include ceiling, floor, wall, and desired angle. Both the robot and in-line wrist are protected with an IP54 rating. Ideal for tasks requiring flexibility and precision. For the KUKA KR 6 R1820 machine we have for sale, reach out for more information.

Five identical industrial robots are available, number of axes: 4, reach: 3139mm, payload: 250kg, weight: 1.45t. With control system, no known defects. An on-site inspection is possible, not under power.

This 6-axis FANUC M-6iB robot arm was manufactured in 2007, featuring a robust design with a 380-415V power supply, digital servo function, and password protection. It includes a handling tool, basic software, and a CE sign option. Ideal for automation tasks requiring precision and reliability. If you are looking to get high-quality automation capabilities consider the FANUC M-6iB machine we have for sale. Contact us for more information about this machine.

This KUKA KR 16 L8 arc HW was manufactured in 2016. It features a robot range of 2015 mm and a maximum load capacity of 8 kg. Equipped with a KR C4 control unit and a FRONIUS TPS 400I welding unit from 2017. Contact us for more information.