iec used for sale

Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...

Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...

CTS climate test cell Walk-in test facility Here we offer you a CTS climate test cell. CTS climate test cell type TW -60/20 T means: Temperature W means: Walk in -60 means: lower temperature -60 °C 20 means: 20 m³ test room volume Plant description: With the temperature test cell, the function or material property of a test material can be tested under temperature influences. The system is divided into the test chamber including the machine compartment and a control station including a lock. The lock can be tempered independently of the control station or test chamber to minimize moisture input when entering the test chamber. The vertical air flow with a correspondingly high amount of recirculating air guarantees a good temperature transfer to the test material. The air treatment room is located at the back of the interior. To the left of the system, the units are located ...

C550 D5e Enclosed A029Z751 Genset Model C550 D5e, 550kVA Standby, 500kVA Prime,QSX15G8,Diesel,Enclosed Emergency Standby Power (ESP) Emission Level,No Certification Local Code and/or Regulation,CE Output Voltage,400/230, 3 Phase, Wye, 4 Wire Engine QSX15G8 Engine Air Cleaner-Duty Rating,Normal Duty Engine Speed Governing,Isochronous Electronic Engine Coolant Heater,240V Main Generator HC5D,50Hz,12 Leads,200V & 400V150C,Emergency Standby Power (ESP) Voltage Regulator,Torque Match Main Generator Heater,None Supplied Genset Housing Sound Attenuated,Steel,Munsell Green Cooling System Genset Mounted Radiator,50C / 122F,Genset Mounted Engine Coolant Mixture,50% Antifreeze, 50% Water Primary Electrical Isolation Device One Circuit Breaker Primary Electrical Isolation Device-1 800A,690V IEC, 600V UL,4 Pole,100%,Left C ...

Microbiological protection and PCR cabinet with vertical air flow General characteristics Vertical hood with laminar flow, Class 100 is used for handling different samples in a sterile environment without turbulence and without impurities in the working room. Protects the work area both against microorganisms and other air contaminants, chemically toxic vapors and unpleasant odors, .. etc. Automatic electronic monitoring system controls all functions and all safety alarms of the system according to EU norms offers many working possibilities: 1) Overpressure system: part of the sterile air is evacuated through the front opening. 2) Pressure lowering system: part of the filtered air is evacuated while the outside air is partially brought inside creating a protective barrier without affecting the laminar flow. Protection of personnel and the environment, but can also be used for work ...

with Freeflow Printserver and Clear Toner M. No.: 3130055185 Counter (m): 7.3 Colors: 4 + varnishes Format : A7 – A3+ (SRA3) Equipment / Additional information: Image Resolution: 2400 x 2400 dpi VCSEL ROS Productivity/Print Speeds—AWM • 80/100 ppm (8.5" x 11"/A4 letter), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 4800/6000 full process color A4 (letter) 4/0 impressions per hour • 44/50 ppm (11" x 17"/A3–12" x 18"/SRA3), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 2400/3000 (11" x 17"/A3–12" x 18"/SRA3 tabloid) 4/0 impressions per hour and 4800/6800 (8.5" x 11"/A4) IMP Paper Format/Sizes • Maximum Sheet Size: 13" x 19.2" (330 x 488 mm) • Minimum Sheet Size: 7.2" x 7.2" (182 x 182 mm), tray inserter kit supports for 4" x 6" (102 mm x 152 mm); see Optional High Capacity Feeder • Maximum Print Area: 12.83" x 19.05" (326 mm  ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

16 to. Krankatze, Kone, CXT, (chassis, rope, hook) – used - : Price from location: 12.500.-€ (net), dismantled and loaded! Not part of the sale are: bridge, remote control, coil hooks. Manafacture: Kone Year of construction: 2019 Reference number of the 200967176/10 Order number 4501376439 Electric wire rope hoist Electric hoist type CXT60410160SA5JDD0S Factory number of the e-train 58704433 Load capacity 16,000 kg Lifting height 10.5 m Drum pulling force - Unwindable rope length – Classification M5 Current consumption 68.2 A Total power 36.3 kW Lifting motor Lifting motor type MF13XL200N260FA5132X-IP55 Factory number 58202098 Power (kW) 35 kW Gearbox Type GEN410NB000-D Lifting speed 11.20/0.22 m/min Factory number 58664786 Rope speed -/- Scrutinies Operating voltage 400 V Frequency 50 Hz Control voltage 48 V Factory Number - Type of c ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

Hermle Centrifuge Z 206 A Small Centrifuge - Service description: Clear user interface - Microprocessor control with LCD display - Lid locking and locking - Pre-selection of the rotor type - Active imbalance detection and shutdown (rotor-specific) - Easy rotor change - Wide range of rotors and accessories - Built according to international safety guidelines, e.g. IEC 61010 - Optimal airflow keeps samples cool - 4x fixed angle rotor 221.39 for 60 mL tubes • Max. speed: 6000 min-1 • max. RZB: 4427 xg • max. volume: 6 x 50 ml • Speed range: 200 - 6000 min-1 in 50 min-1 steps / 10 rzb steps • Running time: 59 min 50 s / 10 s steps 99 h 59 min / 1 min steps • Dimensions (WxHxD): 28 x 26 x 37 cm • Weight: 12 kg Condition: used, top condition More centrifuges - new and used - can be found in our shop! International shipping costs on request!

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...

Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0  Diametrical thread: (32) 7.5 - 112  Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...

Electrohydraulic scissor fork stacker Lift truck, pallet truck for pallets TOYOTA / BT type HTH 10 E Fabr. No. 481795 Year of construction 2005 Load capacity 1000 kg Lifting height max. 800 mm Height drained 85 mm Fork length 1190 mm - Electric lift over 12 volts Battery operation - manual stroke via hand lever as in the pallet truck - TOYOTA Industrial Equipment Europe SARL (Made in France) - Long-stroke hydraulic cylinder - with single roller - integrated charger (mains voltage 230 Volt, with IEC plug) Net weight 140 kg good condition; used

Position switch, crane runway limit switch TELEMECANIQUE XCR ( XCR ) IEC 947-5-1 EN 60 947-5-1 240 V 3 A used, tested ! Dimensions: 200 x 200 x 80 mm

Horlemann HR10U-S switchgear 12 kV HR 10U the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power Switchgear: Manufacturer: Hörtemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short circuit power: 20 kA/1s Height: 1900 mm Width: 4550 mm Depth: 750 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Design data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Type: Cast resin Upper voltage: 10 kV Low voltage: 400-230 V Circuit: Dyn5 Year of construction: 2010 Weight: 1.8 t The depressurization of the switchgear is carried out via a pressure relief chamber in the lower area of the control panel Data: Inspection r ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

Ref. -No.: 10371 Manufacturer: LVD Year of construction: 2013 Type of control: CNC Control: 31ilb Storage location: Halberstadt Country of origin: Belgien Structural steel: 15 mm stainless steel: 8 mm aluminum: 6 mm Laser source: Co2 - 4KW Edit size: 6000 x 2000 mm changing table: Yes tension: 50 Hz - 400 Volt Serial no.:: 348XX Operating hours: 31280 H Electrical connection: IEC X-Axis: 6200 mm Y-Axis: 2100 mm Max capacity: 4 kN Max. weight: 25055 KG Dan Performance: 75 kW Machine type: 62-21 cutting head: LM2000 NC Focus Process control: LM2500 Capacitive sensor: LM2301 EG8030 Further information: Last maintenance incl. new PC in 04/2023

Position switch, crane runway limit switch TELEMECANIQUE XCR E18 ( XCRE18 ) IEC 947-5-1 EN 60 947-5-1 Switching arm length: 200 / 200 mm Switching capacity: 240 V AC, 3 A used, tested ! Dimensions ( without switch arm ): 130 x 130 x 80 mm

Julabo FL300 Recirculating Chiller in Undercounter Design 4.5 l The compact FL recirculating chillers are suitable for a wide range of cooling tasks and can be installed under the laboratory bench to save space. Features Ergonomic design and easy operation Splash-proof membrane keypads Large, bright LED temperature display Reliable Microprocessor PID Temperature Control Reliable, high-performance submersible pumps Permissible return temperature +80°C Easy filling and easy-access drain tap for easy emptying Under-level protection with visual and acoustic signal Integrated stainless steel bath vessels Easily accessible drain tap on the front No side vents: devices can be placed side by side RS232 interface for PC connection IP class according to IEC 60529: 21 Alarm output, potential-free changeover contact (max. 30 VA) Working temperature range: -20 ... +40 °C T ...

Position switches, limit switches, limit switches, with roller lever TELEMECANIQUE XCR-T115 IEC 947-5-1 EN 60 947-5-1 Switching arm length ( with roller ): 220 mm Roll: Ø 28 x 80 mm Switching capacity: 240 V AC, 3 A used, tested ! dimensions ( without switch arm ): 95 x 85 x 76 mm

type: FN3100 - 80 - 35 mm manufacturer: SCHAFFNER : Manufacturer: Schaffner EMC Inc FN Type: 3100 - 80 - 35 520VAC / 50 - 60 Hz 80A@50°c / 25/100/21 EN 133200 IEC 60939 Made in Switzerland Three-phase (delta) EMC/EMI line filter 80 A AC DC to 60 Hz Single-stage Terminal block The Schaffner FN3100-80-35 is normally used in electrical circuits and systems to and systems to suppress electromagnetic interference caused by switching power supplies generated by switching power supplies, motor controllers and other electronic devices. devices. Such filters help to comply with EMC directives and reduce the emissions to ensure that other devices in the environment are not affected by electromagnetic are not affected by electromagnetic interference. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

There are one Electric Motor AC ACM 160MB-2/HE and two ASEA IEC 34-1 available.

High-voltage fuse, outdoor / outdoor WICKMANN WERKE GmbH 2115 5514 00 076 VDE 0670 / 402 IEC 282-1 Un: 12 / 24 kV In: 25 A Contacts: Ø 45, length: 32 mm New ! dimensions ( single fuse ): 510 x 56 x 56 mm

NH fuse switch disconnector -660 V AC VDE 0660 -IEC 408 AC 23/500 V -Dimensions: 100/670/H280 mm -Weight: 8 kg

High-voltage fuse, outdoor / outdoor SIEMENS 3GA1 211 ( 3GA1211 ) VDE 0670 / 402 IEC 282-1 Un: 12 kV In: 6,3 A Contacts: Ø 45, length: 32 mm New ! Dimensions ( single fuse ): 360 x 69 x 69 mm

Three-phase synchronous motor, gear motor, electric motor -Three-phase synchronous motor: Baumuller type DSG 56-S -Gearbox: Nord SK. 02053F-IEC 80 -Speed: 6000 rpm -Power: 2.9 kW -Brake -Tachometer -Diameter shaft: O 25 mm -Brake -Protection class: IP 54 -Dimensions: 630/250 / H190 mm -Weight: 35 kg

High-voltage fuse, outdoor / outdoor SIEMENS 3GA1 111 ( 3GA1111 ) VDE 0670 / 402 IEC 282-1 Un: 6 / 7,2 kV In: 6.3 A Contacts: Ø 45, length: 32 mm New ! Dimensions ( single fuse ): 258 x 69 x 69 mm

High-voltage fuse, outdoor / outdoor SIEMENS K337 VDE 0670 / 402 IEC 282-1 Un: 30 kV In: 6 A Contacts: Ø 45, length: 32 mm New ! Dimensions ( single fuse ): 605 x 52 x 52 mm

Power contactor BBC, PETERCEM B85 IEC 158-1 50 kW 660 V 125 A Control voltage: 220 / 255 V AC, 50 / 60 Hz used, tested ! Dimensions: 180 x 82 x 142 mm

Frequency converters, frequency converters, drive converters, controllers, inverters -Manufacturer: Siemens, Sinamics Power Module 240 -Input: 3 AC 380-480 V 31.5 A 50/60 Hz -Motor: IEC 7.5/11 kW -Dimensions: 340/190/H290 mm -Weight: 12.7 kg

Power contactor with thermal relay BBC, PETERCEM B85 IEC 158-1 75 kW 600 V < br />170 A Control voltage: 220 / 255 V AC, 50 / 60 Hz thermal relay: T170 100 - 160 A used, tested ! Dimensions: 335 x 103 x 158 mm

Auxiliary contactor with thermal relay ABB B9-30-10 IEC 947-4-1 4,0 kW 690 V 22 A Control voltage: 220 / 240 V AC, 50 / 60 Hz thermal relay: T25 6.7 - 8.5 A used, tested ! Dimensions: 128 x 45 x 95 mm

Direct current, gear motor -Power: 3 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 2282AZ-IEC 80 -Translation: 1: 11.81 -Hollow shaft diameter: 35 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV -Dimensions: 690/340/H200 mm -Weight: 50 kg

Three-phase electric motor, prepared for the installation of an electric brake STOBER ANTRIEBTECHNIK IE2-BE1R 80 G 4 STO1/OB TPM140 TLB IEC DIN EN 60034-1 0,75 kW 1430 rpm 230 / 400 V 3AC IP 54 shaft diameter: Ø 19 mm Flange diameter: Ø 200 mm shaft diameter (for brake): Ø 12 / 16 / 20 mm Flange diameter (for brake): Ø 132 mm New ! Dimensions: 395 x 200 x 240 mm

Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Resistance thermometer, transmitter SENSYCON 2x Type K DIN IEC 584 Sensor length: 345 / 4000 mm Sensor diameter: Ø 9 / 3 mm Thread: 1/2 ( inch ) with adapter 1 ( inch ) Material ( probe ): Stainless steel used, tested ! Dimensions: 610 x 100 x 70 mm

NOVOTEX Round Profile, Round Profile, Round Bar PAGUS Material: NOVOTEX New name: Textolite, Etronax, PF CC (Phenolic Woven Cotton Cloth), HGW (Phenolic Resin Hard Fabric) DIN 7735, IEC 60893 Diameter: Ø 15 - 225 mm Length: max. 1000 mm Weight: approx. 450 kg solid and hollow material Other quantities on request ! New ! Dimensions ( lattice box ): 1240 x 840 x 960 mm

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Weinig PowerCom Weinig Powermat 500 for window production --------------------------------------------- Machine will be checked at our warehouse Short summary: --------------------------------------------- 6 Spindles with 8,000 rpm and 7.5 KW 5 x HSK/Powerlock Window package with glazing bead separation Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead cutting Large control Powercom with touchscreen Detailed description: --------------------------------------------- Tool arrangement No. 018 for window production Technical specifications: --------------------------------------------- Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm) Working height 8 - 120  ...

Shredder HSM Powerline FA 500.3, for large quantities Specifications Manufacturer: HSM Type: Powerline FA 500.3 Year of construction: 2013 Drive power: 7.5 kW Input width: 500 mm Cutting width: 3.9 x 40 mm Security level (DIN 66399 / ISO / IEC 21964): E-3 / F1 / O-3 / P-4 / T-4 Cutting capacity in 80g/m² sheet: 180-200 Hopper volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg

STANDARD’s 700DD Series pumps are engineered to transfer viscous materials from drums, Intermediate Bulk Containers (IBC) and large storage vessels. Utilizing the principle of positive displacement, these pumps deliver a continuous flow of material with little product degradation. Pump is provided with a 1.5 kW TEFC electric motor. Technical Specifications: Design Progressive Cavity / Positive Displacement Max. Viscosity = 100,000 cps (mPas) Discharge Port 1½ (38 mm) Hose Barb Stator Materials PFTE Mechanical Seal SiC / Viton®/ SiC Immersion Length: 1120 mm Wetted Material Tube & Rotor Assembly: Stainless Steel 316 Stator Material PFTE Motor Drives IEC Fittings Threaded design enables operator to disassemble pump quickly for cleaning, maintenance and inspection Mounting Flange B14/C140-160 Max. Flow Rate: 26 LPM based on water Max. Discharge Pressure: 12 bar Max ...

x-axis: 2000 mm y-axis: 1500 mm z-axis: 750 mm burner heads: 1 3 D laser capacity in Watt: 2700 3D laser cutting and welding system TruLaser Cell 7020 Machine no. A0421A0099 Type: L13 standard equipment - X = 2000, Z = 750mm, B = +/- 135°, C = n x 360° - Laser TruFlow 2700 - Position laser diode - Stationary, rotatable pendant control panel - Teach panel - Teach software - Magnetic clutch, head detection - Laser power control - Power Cycles - Logbook function - focus line - Nitrogen jet aeration - Network connection including installation via teleservice - Analog modem for teleservice - Lighting boom - Documentation twice Deviating from this standard equipment or in addition the machine TruLaser Cell 7020 is equipped with: With the following configuration: Frequency 50Hz Voltage 400 V0 Electrical regulation IEC Language operating instructions German Number of operating instructions 2 p ...

Power contactor BBC HSA 62 E IEC 337-1 600 V 16 A control voltage: 220 V AC, 50 Hz New ! Dimensions: 72 x 43 x 102 mm

Power contactor BBC HSA 80 E IEC 337-1 600 V 16 A control voltage: 220 V AC, 50 Hz New ! Dimensions: 72 x 43 x 102 mm

Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Comm ...

UPS APC Smart UPS 750, 1x IEC plug, 1x connector 1x USB

Description: Print volume: 980x1000x1000mm Print head: single Griffin extruder, 1.75 mm filament. Optional dual head (IDEX). Duet3D Wifi 32-bit controller & Duex5 expansion card 4 XZ axis motors are individually controlled for automatic bed tilt calibration. 100 touch points for automatic bed levelling Minimum electrical requirements - single phase, 208-240 V : North American customers: NEMA L6-30P 30A socket EU/AU/UK customers: IEC 309 32A blue (2P+T) socket Information given for guidance only Print size (W x D x H): 980 x 1,000 x 1,000 mm, Electrical connection: 240 V, Approx. Onsite Dimension. (l x w x h): 2,630 x 1,060 x 1,573 mm, weight approx.: 210 kg

Betriebsspannung: 10 ... 30 V DC; Leerlaufstrom (max.): 60 mA (24 V DC); Isolationsspannungsfestigkeit: 500 V; Gehäuseabmaße: 50 x 50 x 16 mm; Gehäuselänge: 40 mm; Gehäusehöhe: 50 mm; Gehäusebreite: 16 mm; Gehäusematerial: Aluminium (schwarz, eloxiert); Material: PMMA (Fenster); Funktionsprinzip: Lichttaster mit Hintergrundausblendung; Auswertung: digital; Bauform: Quader; Schaltausgang: Gegentakt, 150 mA, NO/NC, umschaltbar; Spannungsfall (max.): 2 V; Lichtquelle: Laser; Laser class: 1 (IEC 60825-1); Farbe: Rotten; Wellenlänge: 650 nm; Lichtfleckgröße: Ø 2 mm; Fremdlichtsicherheit: 5 kLx; Tastweite: 50 ... 400 mm; Shear hysteresis (max.): 0.1 %; Empfindlichkeitseinstellung: Teach-Taste, Fernteach; Anzeige: LED grün - Betrieb, gelb - Schaltausgänge grün - low Functionsreserve (shiny); Schaltfrequenz: 100 Hz; Anschluss: Stecker, M12, 4-pin

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Weinig, MemoryPlus Weinig Powermat 600 with HSK/Powerlock, axial/radial CNC controlled -------------------------------------------------- Machine is being checked Short summary: -------------------------------------------------- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: -------------------------------------------------- Technical data: Working width: 20-230 mm Working height: 10 -120 mm Number of spindles: 5 1. Tool holder - bottom ----------------------------------------------- Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 125 - 145 mm Tool flight circle ...

Number of boring spindles: 3 St. Number of tools: 1.3/4.1. St. Spindle diameter: 50,40 mm Spindle length: 120,320,125 mm weight: 2500 kg loading dimensions L x W x H: 3800x1400x2000 mm table length: 3470 mm Weinig Univar 6 P In order to sell ---------------------- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body  ...

Including accessories, cutting head, welding head 150mm, setting master for cutting head and welding head, communication interface external periphery, automatic front door with servo motor, support frame, the right side door has an opening for pipe processing, this must be closed with a sheet of metal on both sides, battery from the PC must be replaced, the software must be reset for normal operation, with Laser Trumpf TruDisk 3302, laser power: 3300W, connected load: 20kVA, weight: 850kg and Cooling Device KLH RL 16/0 SK IEC.