ideal welding used for sale

Stick electrodes 4.0 x 450 -Type: SH Yellow B -Price: per package -Number: 2 packages available -Weight per package: 6 kg

table length: 1000 mm table width: 1000 mm table load: 1,5 t flange diameter: 700 mm turning speed: max. 0,04 U/min weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,60 x 2,0 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Protection level: 4 - 12 M Power supply: 2 x CR2032 weight: 460 Gramm dimensions: 250 x 270 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 4.0 x 450 -Type: Phoenix K 50 -Price: per package -Number: 5 packages available -Weight per package: 5.8 kg

Stick electrodes 4.0 x 350 -Type: Overcord -Price: per package -Number: 5 packages available -Weight per package: 5 kg

Stack electrode 3.2 x 350 -Type: E 126 Kb -Weight per package: 4.8 kg

Stack electrode 3.25 x 350 -Type: FOX SPEM -Weight: 4.7 kg

Welding rail -from: Röschermatic VM-19/S/CE vacuum unit -Length: 495/90/H 160 mm -Weight: 1.5 kg

Wire electrode, SG2 welding wire, welding wire -Type: CuA18 - Wire Thickness: 1.2mm -Number: 2 rolls available -Price: per roll -Weight: 16.1 kg

Stick electrodes, welding electrodes -Stick electrodes: 2.5 x 250 -Type: FOX DMO Kb -Price: per package -Number: 4 packages available -Weight: 3.2 kg per package

wire electrode, welding wire, welding wire -Welding wire: Filarc PZ6125 -Diameter: 1.2mm -Dimensions: O 300 /100 mm -Weight roll: 16 kg

welding current: 10 - 180 A open-circuit voltage: V connected load frequency: 230 V weight: 6,8 kg Dimensions (LxWxH): 403 x 153 x 264 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m Welding wire 1 roll, Pressure gauge Welding wire 1 roll, Pressure gauge With nozzle and gas nozzle List price: 2200, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 4.0 x 350 -Type: Fincord S -Price: per package -Number: 6 packages available -Weight per package: 4.4 kg

Stick electrodes 3.2 x 350 -Type: Phoenix 120 K -Price: per package -Number: 4 packages available -Weight per package: 4.3 kg

Protection level: 9 - 13 M Power supply: 3 Volt weight: 2 kg dimensions: 300 x 240 x 240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 29 Positionen : 16 mm condition: neu weight: 11 kg Set 1 29 pieces, 16mm system, consisting of: Clamps: 4 x 160610 Bolt: 12 x 160511 Stop: 4 x 160420.N Angle: 4 x 160108.N Angle: 4 x 160110.N Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 2.5 x 250 -Type: Phoenix 330.1 SH Purple R -Weight per package: 3.3 kg

Stack electrode 4.0 x 350 -Type: MT RC 3 -Weight per package: 4.5 kg

Stick electrodes 3.2 x 350 -Type: OK 63.31 -Price: per package -Number: 4 packages available -Weight per package: 1.8 kg

table length: 2000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,38 t dimensions: 2,0 x 1,0 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,35 t dimensions: 1,2 x 0,8 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: 2500 m3/h 0: 3000 mm total power requirement: 1,1 kW weight of the machine ca.: 0,08 t dimensions of the machine ca.: 0,58x0,58x0,58 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 850 - 900 mm weight of the machine ca.: 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 2.5 x 350 -Type: Phoenix Special D -Price: per package -Number: 10 packages available -Weight per package: 4.2 kg

Stick electrodes 4.0 x 350 -Type: Fincord -Price: per package -Number: 4 packages available -Weight per package: 4.3 kg

wire electrode, welding wire, welding wire -Cored wire: Fluxofil 31 -Diameter: 1.6mm -Dimensions: O 300/100 mm -Weight complete: 15 kg

wire electrode, welding wire, welding wire -Cored wire: Carbofil 1 -Diameter: 1.6mm -Price: per roll - Quantity: 2 pieces -Dimensions: O 300/100 mm -Weight per roll: 15 kg

Capacity: 5 Kg internal dimension: 100 x 75 x 450 mm output: 0,4 kw connected load frequency: 220 - 240 V setting device: 30 - 180 Grad weight: 10 kg dimensions: 570 x 200 x 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 57 Positionen weight: 98 kg condition: neu : 28 mm Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Magnetic bolt 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Protection level: 9 - 13 M Power supply: 2 x CR2032 3V weight: 460 Gramm dimensions: 250 x 270 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wire electrode, welding wire, welding wire -Type: AWS A5.18 ER 70 S-6 -Diameter: 0.8mm -started role -Weight complete: 4.2 kg

table diameter: 1000 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,25 U/min max. torque on the faceplate: 900 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,37 + 0,75 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,55 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,5 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,99 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 4.0 x 450 -Type: OK 48.00 -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg

Stack electrode 5.0 x 450 -Type: OK 48.00 -Weight per package: 6.3 kg

Stick electrodes 2.0 x 250 -Type: Fincord -Price: per package -Number: 2 packages available -Weight per package: 1.7 kg

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,5 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,99 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,8 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 55 Positionen : 16 mm condition: neu weight: 23 kg Set 2 55 pieces, 16mm system, consisting of: Clamps: 6 x 160610 Clamps: 2 x 160630 Prism: 4 x 160645.1.N Bolt: 18 x 160511 Stop: 4 x 160410.N Stop: 6 x 160420.N Angle: 6 x 160108.N Angle: 6 x 160110.N Angle: 2 x 160162.N Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes, welding electrodes 2.5 x 290 -Type: 4221 -Price: per package -Number: 2 packages -Weight per package: 5.1 kg

Stick electrodes 3.2 x 350 -Type: Phoenix 120K -Weight per package: 6.2 kg

Welding bar -from: vacuum device Roschermatic VM 45/2 -Price: per piece -Number: 4 pieces -Length: 635 mm/15 mm/30 mm -Weight: 2.2 kg/piece

Stick electrodes 5.0 x 450 -Type: FOX DUR 600 -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg

table length: 1000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,3 t dimensions: 1,0 x 1,0 x 0,85 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 2.0 x 250 -Type: Hera yellow -Weight per package: 3.1 kg

Stick electrodes 3.2 x 350 -Type: OK 63.31 -Weight: package 3.1 kg/79 pieces -Package: not full