ideal welding used for sale

table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet with welding electrodes and welding wire approx. 1,000 kg total Net price 400,00 E

WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT :

WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST WE CAN DO IT WITH ADDITIONAL OFFER

Manufacturer: FANUC Type of Machine : Welding Robot Condition: Used Find more here - / Contact us at -

System Components: Main Control Cabinet - Voltage: 3 × 400 V ±10% - Frequency: 50 Hz - Rated Power: 34.2 kVA - Current: 49.4 A - Fuse: 80 A (gG) - Protection: IP 54 - Type: RCE - Weight: 500 kg - Year: 2020 - Standards: EN 60204-1, EN 61439-1/2 Positioner / Workpiece Manipulator - Type: RPT_05000AR6D PL - Weight: 1800 daN - Year: 2020 - Enables PA/1G optimal positioning - Rotational Axes: 7 - Repeatability: ≤ 0.15 mm Dust Extraction Unit - Model: Dustec 4 XL - Power: 5.5 kW - Voltage: 400 V / N / PE - Air Supply: 6 Bar - Filter Class: M - Year: 09.2020 Welding Technology - Process: MAG (1-wire) - Wires Supported: Solid and flux-cored (Ø 1.0–1.6 mm) - Arc Modes: Short, spray, pulse, long - Power Source: Fronius TPS 600i - Process Optimization: Task-specific Robot & Sensor Periphery - Automatic torch changer - TCP calibration - Internal variable access for diagnostics - On ...

Manufacturer: Prozap Model: EK0 Laser welding station Year of Manufacture: 2023 Power supply: TN-S Voltage: 400 V, 50 Hz Current: 100 A Power: 36 kW Pneumatic pressure: 4.5 bar Weight: 3200 kg Certifications: ISO 9001, CE Find more here - / Contact us at -

lasmanipulator elektrische tafelrotatie handmatig kantelen van de tafel

We are offering for sale a complete used longitudinal beam welding line, comprising the following equipment: MACHINE 1 - TACK WELDING DEVICE - Manufacturer: Wehling - Type: Heftvorrichtung Langsträger - Year of Construction: 2015 - Power: 0.25 kW + 28 x 0.06 kW - CE Marked: Yes Technical Specifications: - Maximum beam length: 13,700 mm - Beam height range: 70 to 500 mm - Flange width: 150 mm and 120 mm (after conversion) - Flange thickness: 5 to 20 mm - Web plate thickness: 5 mm (to DIN 2768-1 tolerances) - Tack position: trough position, 45 degrees - Changeover time per beam pair: max. 10 minutes - Total unit length: 14,300 mm - 28 servo motors for individual height adjustment of beam supports - Rotatable base frame: 0 to 45 degrees - Permanent magnet clamping of the top flange - Siemens S7 control system - Touch screen operator interface - NC axis with programmable software switch ...

Qty. 2 Second-hand stainless steel tube production lines Stainless steel tube mill plant for production of dia. 48.6 mm x 3 mm - 2 lines Brand: Hyundai Precision Type: Tig welding type (DC 600 A) Built: 1994 Revamped: 2020 Roll stand a reducer (changing of bearing ) New welder New heat treatment system for NO 1 mill only! New conveyor & packing system New bead grinder (wheel type) for No 1 mill New electrical panel Mill speed: 3.5- 4 m/min Product pipe: Stainless steel pipe Structural pipe (ASTM A312, JUST 3459, KS D3576 (205/pressure pipe) Strip Width: 152.6 mm (max 170 mm) Thickness: Max 3 mm Pipe dimensions: Dia.: 12.7 - 48.6 mm Length: 6,000 mm Coil weight Max 2 tons Tools: (8 sets) 12.7 ømm 15.8 ømm 21.7 ømm 22.2 ømm 28.6 ømm 34 ømm 42.7 ømm 48.6 ømm

; Gross weight [kg]: 450; Engine: Kubota D1105-EF02; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 38

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

weight max.: 5 t workpiece diameter: 150 - 1800 mm Turning speed: 70 - 1200 mm/min roll diameter: 250 mm total power requirement: 1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • with CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3 t workpiece diameter: 120 - 1500 mm Turning speed: 0,6 - 1000 mm/min roll diameter: 250 mm total power requirement: 0,5 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.

weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm drive motor: 2 x 0,55 kW total power requirement: 1,1 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laservall 3,5 KW KUBO 100 EVO KE100E0109 Bouwjaar: 2009 Mitsubishi Control Microscoop voor het repareren/lassen van kleine onderdelen

This 6-axis PANASONIC TA-1800WG Welding Robot was manufactured in 2008. It includes a 350A welding source, a VWP 316/351/95-3 welding gun, a BRG 2000 mechanical cleaner, an 800mm plinth, and a 750 H-manipulator. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800WG machine we have for sale. Contact us for more information.

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

On offer is a professional pile cutter of the brand IDEAL Type: 5560 Estimated value of goods: 13.000 € Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding.

Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...

5 industrial welders with wire feeder Auction-ID: A7-45993-177

2 industrial welders with wire feeder Auction-ID: A7-45993-174

3 industrial welders with wire feeder Auction-ID: A7-45993-190

2 industrial welders with wire feeder Auction-ID: A7-45993-175

5 industrial welders with wire feeder Auction-ID: A7-45993-180

5 industrial welders with wire feeder Auction-ID: A7-45993-176

Document shredder IDEAL 2445 CC, year 2019, 2x15 mm, S/N 11244501

On offer is a professional pile cutter of the brand IDEAL Type: 5560 Estimated value of goods: 13.000 € Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-254

Ideal Stacking and Paper Cutter The buyer is responsible for the transport down, as well as the loading. Only bid if you have sufficient financial resources, a bid is binding. The Euro pallet is not part of the promotion. Auction-ID: A7-46944-2

Equipped with: spoon entrance, hydraulic connection, brush Auction-ID: A1-40139-208

This concerns an unused product, consisting of article number: 352620, Drench syringe 2ml Prima Twist, Auction-ID: A1-45624-278

Welding helmet welding helmet welding screen Prof RLM1100 New RL-500J — Automatic Welding Mask (ADF) Filter size: 110 x 90 x 9 mm Viewing window: 93 x 43 mm Optical class: 1/1/1/2 Helmet material: PP (polypropylene) Eclipse Light mode: DIN 4 Dark mode: DIN 9–13 Switching speed Light to dark: 0.3 ms Dark to Light: 0.1–0.8 sec (adjustable) UV/IR protection: permanent up to DIN 16 Power supply: Solar cells + 1x CR2450 lithium battery (replaceable) Lens Control: Automatic

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Welding helmet welding helmet welding screen Prof RLM900 New RL-600K — Automatic Welding Mask (ADF) Filter size: 133 x 114 x 10 mm Viewing window: 100 x 93 mm Optical class: 1/1/1/2 Helmet material: PP (polypropylene) Eclipse Light mode: DIN 4 Dark mode: DIN 5–9 / 9–13 Switching speed Light to dark: 0.2 ms Dark to light: 0.1 / 0.4 / 0.8 sec (3 fixed modes) UV/IR protection: permanent up to DIN 16 Power supply: Solar cells + 1x CR2450 lithium battery (replaceable) Lens Control: Automatic Temperature Use: -5°C to +55°C Storage: -10°C to +70°CSonnet 4.6

We sell 4 pieces of used welding units, welding rectifiers, brand Lincoln DC400, year: 1993, functional, in need of easy repair, only for export For purchase of 4 pieces Price per piece 500,00 E net Single price 600,00 E net

continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Auction-ID: A1-41998-109

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 80% Insulation class: F Protection class: IP21 Weight: 9.4 kg Dimensions: 396X142X268 TIG: Rated input power: 4.8 kVA Rated input current: 27A Open circuit voltage 56V Output current 20-190A Output voltage 190A / 17.6V MMA: Rated input power: 6.6 kVA Rated input current: 37A Open circuit voltage 80V Output current 20-170A Output voltage 170A / 26.8V

Unused

Unused

Unused in the original packaging Microprocessor controlled MIG/MAG/MMA/TIG Lift inverter multi-process welding machine. Input voltage - 3PH 400V Mains frequency - 50/60 Hz Current range - 20-300A Maximum current - 300A @60% DC current - 205A Maximum no-load voltage - 63V Maximum current drawn - 15A Absorbed current at 60% - 10A Maximum power consumption - 9 kW Power consumption at 60% - 6.5 kW Power factor - 0.9

3 welding carts Welding cart 1 is width 42cm length 100cm height 140cm welding cart 2 is width 42cm length 84cm height 135cm welding cart 3 is width 57cm length 101cm height 180cm

Unused in the original packaging Microprocessor controlled MIG/MAG/MMA/TIG Lift inverter multi-process welding machine. Input voltage - 3PH 400V Mains frequency - 50/60 Hz Current range - 20-300A Maximum current - 300A @60% DC current - 205A Maximum no-load voltage - 63V Maximum current drawn - 15A Absorbed current at 60% - 10A Maximum power consumption - 9 kW Power consumption at 60% - 6.5 kW Power factor - 0.9

TIG welding machine, TIG welding machine NIMAK type GS 200 WWIG and electric DC welding machine, E-welding machine also for rod electrodesFabr. No. 26642 Year of construction approx. 1983Power 200 Amp. = 60% ED 150 Amp. = 100% EDEinfinitely variable power adjustment rangeMains connection 380 Volt, 50 Hz, 32 Amp. Plug- 5 meter TIG hose packet- HF ignition- stepless current control and current rise- connection for electrode welding- direct current only- water-cooled- inert gas pressure reducerSpace requirement L x W x H 900 x 590 x 1000

Tig Welding Machine L-TEC Type Inverter TIG 200 DCWIG Welding Machine for DC DCFabr. No. 184548 year of construction approx. 1994Power 200 Amp. = 60 % ED 155 Amp. = 100 % EDEinfinitely variable setting rangeCurrent type DC (direct current)Mains connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with central connection and hand torch- with remote potentiometer (foot switch)- gas pressure relief valve- direct current only = DC- HF ignitionSpace requirement L x W x H 850 x 480 x 740 mmWeight approx. 150 kgThe welding test results in very

E-welding machine, rod electrode welding machine ESAB type LTG 250Masch. No. 736-820-387 Year of construction 1997Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % EDpower setting: infinitely variable - electrode holder with 6 meter connection cable - direct current - fan - air cooling - possibly also TIG welding possible, without hose packageMains connection 380 Volt, 50 Hz, 32 Amp. ConnectorSpace required L x W x H 1200 x 750 x 1050 mmWeight 180 kgGood conditionDevice was originally also suitable for TIG welding

Welding turntable - Welding rotary device with housingRound welding deviceLoad capacity approx. 50 kgTurning chuck diameter 300 mmTurning chuck speed 1.0-15 rpm. Mains connection 230 volts, 50 Hz- Spiral lathe chuck with inwardly stepped chuck jaws- Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left- Start via electric switch- Welding current transmission with sliding contact- Extraction connection 160 mm- Interior lightingDoor opening W x H 715 x 1060 mmInterior dimensions W x D x H