idea machine used for sale

Thank you for your interest in our used machines, which we can offer you as follows: Probat L12 roaster in top condition - little used Manufacturer: Probat Model: L 12 batch roaster Year of construction: 1995 Heating medium: Gas Capacity: approx. 5 - 12 kg/batch Dimensions: 1700x1000x2000 mm Weight: approx. 580kg Details: - Batch size up to approx. 12 kg green coffee - The roaster is installed and can be viewed in operation - Last used to roast buckwheat or pumpkin seeds - Operating instructions available in German We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. from the location Germany; unpacked, without disassembly

1 of used high-speed film-only shrinkpacker - multi-packer, make KHS, type Innopack SP A-H, new 2013, operating direction right. Used to pack standard and sleek beverage cans as 2x2=4 3-lane, as well as 3x2=6, 4x2=8, 5x2=10 and 4x3=12 dual-lane. Siemens S7 controls, automatic film-splicing. Capacity upto 125 cycles/minute depending on product/configuration.

Hydraulic injection moulding machine manufactured in 2005. This DEMAG Ergotech Extra 160-430 features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It has a screw diameter of 45 mm and accommodates molds with a maximum height of 585 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech Extra 160-430 machine we have for sale. Contact us for further details.

Wilco WILCOMAT R HSA 02/R 20 VISION fully automatic system for test vials which combines two test methods in the following steps: 1. Headspace Analysis (HSA) to determine the oxygen content in the test specimen (1 test station), 2. VISION for the detection of manufacturing and cosmetic defects (3 cameras), main machine components: 1. Interface with the HMI control panel, 2. In-line feed conveyor, 3. Bypass system, 4. HSA test rotor with the HSA 1 single-head HSA test station, 5. ‘HSA Reject’ and ‘HSA Not Inspected’ trays, 6. Acceleration screw conveyor from HSA to VISION, 7. VISION test rotor with three VISION test stations: Cap 1, Flip-Off, Cap 2, 8. ‘VISION Grey/Uninspected’ tray with star wheels, 9. In-line outfeed conveyor followed by a tray loader, 10. Three (3) electrical control cabinets, 11. One (1) vacuum pump. The following trays are provided for: Tray-HAS Defective ...

TECHNICAL SPECIFICATIONS Manufacturer: BACKERS Description: Star screening and mixing machine Version: wheeled / tracked Undercarriage: Semi-trailer and crawler undercarriage Type: 3-mtbl(c) Year of manufacture: 2018 Operating hours: approx. 4,000 h Screen deck: Star screening machine with separation cut at approx. 80mm Screening area: 4 sqm Throughput (sieving + mixing): 200 t/h Flow rate (screen): 250 cbm/h Binder bunker: 7 cbm Engine: Volvo Motor TAD 572 VE, 160 kW Drive type: Diesel-hydraulic Weight: 30,000 kg Transport dimensions: 13,660 2,550 4,000 (LWH in mm) SPECIFIC COMMENT - Fully functional and ready to drive - Automatic control with numerous settings - Belt scale - Dedusting system - Various spare and wear parts - Areas of application: Excavation/overburden processing, soil stabilization, Production of liquid soil, mixing HGT material

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NUMBER 100 POSITIONS

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

Used spiral kneader DIOSNA, type: SP 160 D -In bakery condition- - up to 160 kg dough / approx. 100 kg flour - Condition: Good, ready for immediate use The kneader is in good used condition and is immediately ready for use. Visits and test runs are possible by arrangement.

Used dough divider KEMPER, Type: Imperator CT -In bakery condition- The machine is still being refurbished. Visits and test runs are possible by arrangement.

u

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991

Tools grinding machine with double disc. Auction-ID: A7-50717-10

Auction-ID: A1-50447-30

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning  ...

Counter: 86mio PQC, QAPC KOMORIMATIC WASHERS POWDER SPRAY

Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987

Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985

Heidelberg SM 74-5PH Year: 1997 Counter: 129mio Size: 52x74cm Autoplate Alcolor Technotrans cooling All auto. Washers IR dryer CPC 1.04 Cptronic Alphatronic powdering

Size: 46x58,5, Hotfoil and Hologram register, two foil pulls, 2 hologram registration, max. / min. foil width 550mm/15mm, honey comb, max roll width 60mm, electronic counter, control unit Also available in following sizes: 54x72 56x77 56x82 64x90

Equipped for die cutting with inking unit Size: 46 x 58,5 cm Weight: 3300 kg Power Req.: 380 V / 50 Hz Power Requirement: 3,5 kW Space Requirement 2800 x 1700 x 1700 mm

Equipped for die cutting with inking unit Size: 40 x 57 cm Weight: 2800 kg Power Req.: 380 V / 50 Hz Power Requirement: 3,5 kW Space Requirement 2800 x 1700 x 1700 mm

Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997

Labeler, make Krones, type: Universella 18-8-6. with 2 glue pumps, conveyors, sets for 0,25 lt + 0,33 lt Gastro crown cap, 0,33 lt Longneck screw cap, 0,5 lt NRW brown crown cap, 0,5 lt NRW white screw cap, 0,7 lt GDB screw cap, 0,75 lt Gastro screw cap, built 1998.

Heidelberg OHT A4 size Original Heidelberg Hotfoilsystem

Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990

Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

Bacher 2045 Registerpunching Rigister punching width: 425mm Max plate width: 800mm

Year of manufacturing: 2009 19 Monitor and Programm Side-table left with Air Side-table right with Air Air Table Photocells

Polar 115 EM Monitor Year: 1992, Air Table, 1 Spare knife, Side Table, Monitor, Program

Labeler, make Krones, type: Variomatic, for 12.000 bph, adjust to 0,5 lt. and 0,75 lt. bottles, with 3 aggregates, for Body- shoulder and back label, as too with additional label dispenser for self-adhesive labels, with around safety casing, built-on control cabinet, year of origin: 1998

Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995

560mm Width – Keypad Electricity 220/240 V – 50 Hz Dimensions: 100 x 60 x high 52cm

Siemens X-ray system type Multix / Vertix Swing with generator POLYDOROS IT/S in good condition

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Eyelet machine Hang 87 F, machine number 38960, 3 eyelet heads, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MANUFACTURER GMP WIDTH (MM) 1550 HIGHT (MM) 1210 WATT 100 AMPERE 0.4 MORE INFORMATION LAMINATING SIZE: 1120MM TYPE EXCELAM-Q1120COLD/RS DEPTH (MM) 610 VOLT 230

Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg

Viewing by appointment Auction-ID: A1-40403-31

Auction-ID: A1-50608-195

Folding unit GUK FA 50-2 2nd station; good condition; cleaned and tested; Inlet width 500mm; 2 folded pockets; Self-control. Folding unit GUK FA 50-2 secound unit; good condition; cleaned and checked; working witdh 500mm; two pockets; Automatic control.

bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used and unchecked; viewing desired Auction-ID: A1-50737-78

Auction-ID: A1-50608-182

Used and unchecked; viewing desired Auction-ID: A1-50737-88