idea machine used for sale

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

swing diameter:80 mm workpiece length:450 mm weight of the machine ca.:3500 kg

Banderolier Busch TB 39-30; good condition; cleaned and tested; Strap width 30mm; frame 390x200mm; large-roll magazine; suitable for paper and foil. Banding machine Busch TB 39-30; good condition; cleaned and checked; band width 30mm; frame 390x200mm; Big Size Roll Magazine; used for paper or foil.

Fully automatic high-performance binding machine Rilecart B 599 for brochures with wire comb binding from the manufacturer Rilecart, Italy.

swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Filling machine for filling and closing liquids in corresponding bottles. Dosing volume: approx. 50-500 ml. 4-digit machine incl. 6 format parts, infeed turntable, Johnson pump, spare parts etc.

W&P spiral mixer Type: ST 50 Stainless steel boiler Steel spiral 2 timers 2 speeds Emergency stop switch for max. 50kg flour or max. 80kg dough on castors 380 V 50Hz

weight of the machine ca.:15 t

weight:22 t

Karl Schnell KS P9 vacuum filling machine, performance max. 3200 kg/h, filling pressure max. 22 bar, portioning size 1 g - 1000 kg, portioning speed max. 700 port./min, hopper cappacity 300 liters

CEPHALOPOD CUTTER WITH POSITIONING BAND, MECALSA TYPE: MC CTDP/CH200 Technical description: Material: Stainless steel Voltage: 380/440 V Frequency: 50/60 Hz Cutting pitch between blades: 40 mm

max. wheel diameter:40-200 mm total power requirement:31,3 kW weight of the machine ca.:4 t dimensions of the machine ca.:1,8 x 2,2 x 1,8 m

max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm

Rego stop and mixer Type: SM 3 30 liter boiler Stainless steel boiler with whisk Raising and lowering boilers mechanically easy cleaning due to smooth outer surfaces Weight of the machine approx. 280 kg Stable and Robust 220/380 V – 2 kW – 6,9/ 4 A  New ball bearings, new belts, new ball head, new electronics, repainted Dimensions: Height: 160 cm Width: 60 cm Depth: 70 cm

Dressing diameter: Planing width: min. module: for Reishauer RZ150

weight of the machine ca.:4 t

Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes

turning diameter:200 mm turning height:120 mm weight of the machine ca.:18 t Available from 01.08.2024

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

dimensions of the machine ca.:3,5 x 2,0 x 2,5 m

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

BAADER SKINNING MACHINE FOR FISH, TYPE 47. ID 2279 Technical description: Machine number: 10-2211-0047 Working width: 205mm Belt width: 195mm Total dimensions: 2200mm x 900mm x 1200mm

bore stroke:170 mm total power requirement:3,5 kW dimensions of the machine ca.:0,75 x 1,10 m bore spindle turning speed range:30-3000 U/min bore range:diameter:4-60 mm

max. wheel diameter:280 mm max. module:5 min. module:1 min. number of teeth:7 toolpiece turning speed range:4.000...10.000 U/min tool length:210 mm CBN

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt

closing pressure:6600 kN weight of the machine ca.:45,5 t

SKINNER- DERINDER, GRASSELLI TYPE: N520 Technical description: Material: Stainless steel Working widht: 470 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2300 x 850 x 1720 mm

GUTTING MACHINE FOR HERRING, BALTIC HERRING, SARDINES, MACKEREL AND WHITEFISH ARENCO MODEL: CIS Technical description: Power supply: 380-440 V – 50-60Hz Conveyor width: 260 mm Dimensions: 3600 x 900 x 1330 mm

max. wheel diameter:600 mm max. module:6 weight of the machine ca.:0,9 t dimensions of the machine ca.:1,52 x 0,91 x 1,45 m

grinding diameter max.:400 mm max. width of grinding wheel:180 mm grinding range:2-100 mm total power requirement:24 kW weight of the machine ca.:3,2 t Out of valve production

weight of the machine ca.:9,5 t x-travel:406 mm z-travel:380 mm

pulling force - max.:80 t total wight:26 t dimensions of the machine ca.:49 m² m total power requirement:85 kW working stroke:250 mm

pulling force - max.:100 t total power requirement:87 kW weight of the machine ca.:51 t dimensions of the machine ca.:95 m² m working stroke:2750 mm max. helix angle:+/- 30 ° Working stroke: 2750 mm

VACUUM STUFFER, VEMAG ROBBY 2, TYPE: 135 Technical description: Serial number: 135.0243 Filling capacity: depending on the feeding element up to 3000 Kg/h Portioning speed: up to 650 portions/min (depending on product, casing and portion size) Power supply: (220-240 V, 27-35 A)-(380-460 V, 15-20 A) 3 Ph, 50/60 Hz Dimensions: 1000 x 900 x 2020 mm

MEMBRANE SKINNER, MAJA, MODEL: EVM 2000 Technical description: Serial number: 38280 Power supply: 380 V, 3 Ph, 50 Hz, 2.2 A, 0.75 kW Working widht: 420 mm Dimensions: 700 X 700 X 1000 mm

x-travel:2700 mm y-travel:1000 mm z-travel:1050 mm T-slots:7x22 feed speeds:10000 mm/min - Pallet Diameter : 3.300x1.000 mm - Max. Feedrate X/Y/Z: 10.000 mm/min

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

turning diameter:150 mm total power requirement:36 kW

turning diameter:150 mm total power requirement:36 kW dimensions of the machine ca.:6,20 x 5,16 x 3,35 m

turning diameter:150 mm total power requirement:36 kW dimensions of the machine ca.:6,20 x 5,16 x 3,35 m

SKINNER- DERINDER, GRASSELLI Technical description: Material: Stainless steel Working widht: 700 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2300 x 1100 x 1400 mm

THERMOFORMER, ULMA, TYPE: TF-OPTIMA Technical description: Format: (x4) 114 x 159 mm Power supply: 380-440 V/50-60 Hz Power : 30 kW Dimensions: 6600 x 1100 x 2050 mm

diameter:500 mm workpiece weight:30 kg test dia. min.:200 mm total power requirement:0,03 kW weight of the machine ca.:1000 kg dimensions of the machine ca.:1x0,5x1,06 m