136,830 used machines on RESALE, but how to find them? Machine Search
: neu : ca. 12 Wochen ab Auftrags : Türkei : 7500 € : 144.75 € : 2 mm : 700 mm : 1.1 kW : 7,5 m/min : 1400 mm : 400 mm : 1150 mm : 360 kg : 120 / 1.000 mm : 280 mm gearbox motor with brake footpedal central lubrication OPTIONAL EQUIPMENT (PRICE ON REQUEST): pneumatic upper roll feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tie bar expansion nut for die casting machine IDRA1800, TR260x9, 446808, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Tie bar expansion nut, Tr260x9, D465x300mm high. Approx. 300kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date ...
Adjustment nut for die casting machine IDRA OL1800, pullable, TR260x9, 170359, Idra, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, - is in the original packaging, Adjuster nut, pullable, Tr260x9, D390/338x300mm high. Approx. 115kg for die casting machine IDRA OL1800/1750 The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D370, D330, D300 6 months warranty We give you a 6-month warranty for these goods f ...
Adjusting nut for die casting machine IDRA1800, TR260x9, 990542, Idra, used Top Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the ...
Adjusting nut for die casting machine IDRA1800, TR260x9, 141384, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjusting nut, Tr260x9, D430x345mm high. Approx. 255kg for die casting machine IDRA OL1800/1750 With bronze contact rings on both sides, The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for ...
Adjusting nut for die casting machine IDRA1800, TR260x9, 151913, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In ...
Replacement column for IDRA OL1800, D260mmx6480mm, (10), 160400 Idra, refurbished Refurbished! - The column has been refurbished by Strate and is ready for immediate use. - It is still in its original Strate delivery packaging. - Sourced from the spare parts stock of a certified manufacturing facility, - In very good condition and fully functional. Special price Replacement column for IDRA OL1800, D260mm x 6480mm, trapezoidal thread TR 260x9mm, approx. 2700kg We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, adjusting nuts, strut expansion nuts and two-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, ...
Replacement column for IDRA OL1800, extendable, D260mmx6710mm, (11), 111801, Idra, refurbished Refurbished! - The column has been refurbished by Strate and is ready for immediate use. - Sourced from the spare parts stock of a certified manufacturing facility, - In top condition and fully functional. Special price Replacement column for IDRA OL1800, D260mm x 6710mm, can be pulled out trapezoidal thread TR 260x9mm, approx. 2800kg We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, adjusting nuts, strut expansion nuts and two-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 Ensuring the function: In ...
Replacement column for IDRA OL1800, extendable, D260mmx6710mm, (12), 211286. Idra, refurbished Refurbished! (top condition) - The column has been refurbished by Strate and is ready for immediate use. - It is still in its original Strate delivery packaging. - Sourced from the spare parts stock of a certified manufacturing facility, - In top condition and fully functional. Special price Replacement column for IDRA OL1800, D260mm x 6710mm, can be pulled out trapezoidal thread TR 260x9mm, approx. 2800kg We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, adjusting nuts, strut expansion nuts and two-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Ca ...
Replacement column for IDRA OL1800 + adjustment nut, D260mmx6480mm, (13), Idra, used Second-hand! - Sourced from the spare parts stock of a certified manufacturing facility, - The column is in second-hand condition but is still in working order. - However, the surface of the column already has numerous surface defects. - The column can be used as a spare or for emergencies. - For this reason, this column is being sold at a particularly low price. Special price Replacement column for IDRA OL1800, D260mm x 6480mm, trapezoidal thread TR 260x9mm, approx. 2700kg Includes an adjustment nut, can be easily turned. We store the column in a dry, thermally insulated room. The column can be viewed, inspected and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Please note: We offer various columns, ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 21400 € : 410.88 € : 5 mm : 2000 mm : 250 mm : 3000 mm : 750 mm : 1400 mm : 1350 kg Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system Throat depth: 1200 mm According to EC safety regulations Operating manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): 1 spare blade set Flanging attachment with 1 set rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer and model: iDEAL BAS 050-11 Rated power (ED 50%): 4.5 kVA Secondary voltage: 2.6 – 4.4 V (6 stages) Clamping force: 10 kN (hydraulic) Maximum compression force: 2.2 kN Iisc Hq E Rrszqdkxjvef Machine weight: approx. 180 kg Hydraulic tensioning, operated via foot switch Pyrometer (GTR): yes (temperature display on the touch panel) Connection voltage: 380 – 419 V Bi-metal/carbide saw blades: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Blade dimensions: 6×0.4 – 30×0.6 mm Blade steel S235JR: max. cross-section 75 mm² Blade steel X5CrNi18-10: max. cross-section 40 mm² Pyrometer / GTR: The integrated pyrometer (GTR) enables contactless temperature measurement during the annealing process. The target temperature is pre-defined in a recipe and displayed on the panel – the annealing cycle en ...
IDEAL 1080 Lever Shears with Material Knife Cutting length 800 mm Year of construction 2016 Serial Number 1166252 Additional set of material knives with cutting rail
Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson Torit, filter system for extraction system -Type: IDFP2 -Cartridge filter: see photos -Inlet/Outlet: Ø400 mm / Ø250 mm -Extraction capacity: 2500 m³/h -Pressure: 2370 Pa -Motor power: 3 kW -Filter dimensions: 1800/1200/H1780 mm -Weight of filter: 350 kg -Blower dimensions: 600/750/H1070 mm -Blower weight: 75 kg
Welding and annealing of bandsaw blades is the stated application of this iDEAL BAS 120, year of manufacture 1997. Wood band saw blades are covered from 25 mm upward to the 120 mm maximum blade width. Annealing control is by pyrometer. Clamping is hydraulic, described as providing constant and repeatable welding pressure for the joint. The power supply is 400 V at a frequency of 50-60 Hz. Weight is 800 [kg] and dimensions are 100013501700 [mm]. Documentation consists of the operating manual, schematics and spare parts list; the remaining figures are given in the specification table on this page. Band saw blades for wood 25-120 mm Bi-metal bandsaw 25-100 mm
Guillotine Ideal 4850-95 EP with Program and automatic Spindle Press. Stapelschneider mit EP-Steuerungsmodulmit und automatischer Spindelschnellpressung. Schneidmaschine / Gullotine IDEAL 4850-95 EP Baujahr / Year 2004 - Serial-No. 3087585 Schnittbreite / Cutting width max. 475mm Schnitthöhe / Cutting height 80mm Programm Linker Seitentisch / Left side table Ersatzmesser / Spare Knife Mit Bedienungsanleitung / Woith operartion manual
used
IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 14009001500 mm over wi ...
iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, ...
Deblister machine Manufacturer: IDI Pharma mobile Year of manufacture 2004
electric pile cutter with automatic pressing, 380V, back gauge adjustable by hand crank, measuring scale on the front table, optical cut indication, table model (without base)
Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Clamping force 38 k ...
Electric pile cutter with EASY-CUT, 52 cm cutting width, automatic pressing, back gauge with touchpad and program control, safety light barrier, 220 V
automatic pressing and program control, spare blade, documentation, Cut length: 475 mm, Cutting height: 80 mm, Remaining cut: 35 mm, Insertion depth: 450 mm, Power connection: 230 V / 50 Hz
Idexx CR 1417 Digital X-ray Machine Good working condition and cosmetics Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID: A1-51471-140
RECON Part number: 1230 2144 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Identification system -Type: BIS F-403 -Voltage: 24 V DC -Dimensions: 130/175/H45 mm -Weight: 0.55 kg
1700 : EL 400 30 pcs. DM 50 Steel axle M8 i 1100 : EL 470 100 pcs. DM 50 Steel axle 10mm Price per piece / as good as new
Evaluation unit PEPPERL+FUCHS Ident - M MVI-F57-2HB12 108068 Dimensions: 340 x 260 x 190 mm
Inductive Sensor, Position Sensor IFM EFECTOR ID5005 IDE3060-FPKG 10 - 36 V DC Dimensions: 135 x 80 x 40 mm
The SpectraMax® iD3 multimode microplate reader measures absorbance, fluorescence, and luminescence and is ideal for busy multi-user, multi-application labs. Its large, high-resolution touchscreen allows you to easily set up methods, perform experiments, or view instructional videos without the need for a dedicated computer workstation. THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, ...
2 almost identical, mobile loading bridges from 1.45 m to 0 Manufacturer Fa Butt, Factory No, 80110001281 A Year of construction 2010 Load capacity 7,000 kg
Replacement column for IDRA 3300, extendable, D330mm x 7350mm, (5), PR11708354, Idra, refurbished Special price Replacement column 5 for IDRA 3300, D330mm x 7350mm, Trapezoidal thread TR 330 x 10, 4932 kg Refurbished! The column has been overhauled by Druckguss Service, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Replacement column for IDRA 3300, D330mm x 7115mm, (6) 220735, Idra, refurbished Special price Replacement column 6 for IDRA 3300, D330mm x 7115mm, Trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Cartridge Valve head for die casting machine IDRA 2500, C13DEC107E50/0U99009900, Parker, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - has very slight storage marks, no effect on function 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. ...
Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...
Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor., , Type of Machine: Butter Packaging Machine, Capacity: ± 600 Kg/h, Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height, Weight: 250 grams, Machine Weight: 840 kg, Packaging type: Aluminium and Parchment Paper , Motor power: 1,5 kW
IDM edge banding machine with chain feed conveyor, front roller support, workpiece support table and control panel with adjustment dials and temperature gauge. Auction-ID: A1-50699-17
With various rolls of foil Auction-ID: A1-50244-131
Industrial blue finish. Equipped with several drilling heads, a work table with positioning stops and a ruler. Electric machine on metal frame, suitable for document perforation and printing work. Functional Auction-ID: A1-51273-19
Auction-ID: A1-51285-278
Loading dimensions: 150 x 150 x 100 mm Auction-ID: A7-51107-117
The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²
maximum number of results exceeded
please refine your search
200 € 
