id grinder used for sale

Ref.Nr. 00938 Commercial offer Name of the system: Coordinate welding machine Manufacturer Ideal Factory Model CSR 101 Year of manufacture 2005 Rated power 125 kVA Connected load 125 kVA Open-circuit voltage 9 V Primary voltage 400 V Nominal frequency 50-60 Hz Fuse 200 A Repairs and overhauls These would be the most important repairs. CSR 101 Timing belt for lower table renewed in 2021 Water flow monitor renewed in 2023 Maintenance hoses for cooling renewed in 2022 Welding transformer 2024 replaced and contact surfaces revised on the secondary side Secondary rectifier 2024 sealed and revised 2024 Cooling system cleaned and re-hosed, operation with Addinol Protect extra Battery for control unit renewed in 2024 Proportional valve for electrode force 2025 overhauled Condition of the system under power, can be visited by app ...

Professional file shredder from Ideal

SECOND-HAND 5 AXIS BALESTRINI IDEA 2 – CE RULES - X axis 1800 mm - Y axis 1600 mm - Z axis 700 mm - 4 x 7.5 air cooled Colombo spindles - NUM control. - 2 Pumps 75 mc/h Rietschle - YEAR 2007 - complete with cabin

Paper Cutting Machine IDEAL (KRUG + PRIESTER) 4850-95EP Product No.PS5817 Year of manufacture 2007 Very good condition

A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible.

Type: SMH 060 Band saw blade grinding machine. Strip width up to: 60 [mm]. Power: 400 [V] / 50 [Hz]. For removing the weld bur from butt welded joints. In used condition, cleaned, repainted and tested.  3 pcs on stock.

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

1X RESERVE KNIFE FOR IDEAL 7225-55 EC3 LT Format (cm): 72

S. No.: 6173431 Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago

Intermediate dough chamber Intermediate chamber for resting (rising) the test after its shaping They are characterized by high-quality workmanship and maximum reliability Also, all models are mobile Rest time: 6.5 minutes Capacity: 1800 - 2000 pcs/h Number of vessels: 238 Container capacity: 100 - 1500 gr Dimensions: 1700 x 1700 x 2200 mm Dough inlet height: 930 ± 20 Dough outlet height: 1050 ± 100 Electrical power: 0.55 kW Machine weight: 700 kg

S. No.: 1504369 Cutting length: 800 mm Format: DIN A3 Cutting capacity: 20 sheets (paper weight 70g/m²) Table size: 605 x 800 mm (W x D) Professional lever cutting machine IDEAL 1080 with automatic safety. The IDEAL 1080 can cut formats up to DIN A3 and also DIN A2 crosswise with a cutting length of 800 mm. The maximum cutting capacity is approx. 20 sheets of 70 grams. The stepless back stop can be locked. The sheets of paper are securely fixed before the cutting process using a foot pressure. This creates precise cuts. In addition, a transparent, fixed blade guard made of shatter-proof plastic offers optimal safety. The durable blades are made of high-quality Solingen knife steel and can also be resharpened if necessary. GS tested!

A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible.

Laminiermaschine / Laminator GMP Eurolam IDH 540III Year 2015 - Serial-No. CJ00340K Bogengröße / Paper Size max. 540x740mm Arbeitsgeschwindigkeit / Laminating Speed max. 30m/min Papierstärke / Substrate Thickness 120-350g/? Front Roller Diameter T: 163mm / B: 150mm Rear Roller Diameter Laminating Temperture max. 150? Power Consumption 12kW Die Maschine verfügt über eine Induktionsheizung, pneumatischen Zylinder-Andruck und eine professionelle PID-Temperaturkontrolle.

Pile cutter Ideal 4850-95 EP; cleaned and tested; Cutting width 475mm; insertion depth 450mm; Insertion height 80mm; Program memory; 2.Knife. Guillotine Ideal 4850-95 EP; cleaned and checked; Cutting Length: 475mm; Insertion depth 450mm; cutting height 80mm; program control; secound knife.

cutting capacity: 2.0 mm throat: 700 / 280 mm round blank diameter max.: 1000 mm round blank diameter min.: 120 mm speed: 7.0 m/min total power requirement: 1.10 kW weight of the machine ca.: 360 kg range L-W-H: 1400 x 400 x 1150 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven circular shears with large projection - with hardened blades - machine base - manual setting of the desired round diameter - manual material clamping - electric motor brake - 1x freely movable foot switch including emergency stop button The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

model: T500, brand: Idromec, Construction year: 2004, operating hours: approx. 11000, Shear force: 500 tons, Box length: 6 meters, Pretensioning device: No, Oil cooling: Yes, Automatic cycle: Yes, Remote control: Yes, Protective plate for slider: No, control cabin: Yes, State: as seen, not outdated, mass: approx. 58 tons, Installation: not included

Tie bar expansion nut, adjustment nuts and split nuts for die casting machines from IDRA, Frech/Müller Weingarten, OP Die Casting Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Condition New The mother is new and fully functional. The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar expansion nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Cutting machine IDEAL 5560 Art.Nr. L1121

An 8-station rotary filling machine Breitner including accessories is available. The machine was used for filling mustard jars. Glass volume: 250ml, filling capacity: 6000pieces/h, filling stations: 8. Format adjustment possible if required. Documentation available. On-site inspection is possible.

This machine is ideal for use in bakeries, restaurants, or grocery stores. It impresses with its robust construction, ease of use, and consistent slicing quality.

A Miwe deck oven is available. Decks: 4, heating type: oil, heating circuits: 2, usable baking area: approx. 8m², oven width: 1200mm, oven depth: 1600mm, max. temperature: 300°C, machine dimensions X/Y/Z: approx. 1600mm/3350mm/2350mm, weight: approx. 2000kg. Including lifting table Unimetall SH 101. An on-site inspection is possible.

Deck Oven Miwe Ideal 6.1820 - 5 Miwe Ideal deck ovens approx. 22sqm baking area - Manufacturer: Miwe Michael Wenz GmbH - Type: Ideal 6.1820 - a stove is 180cm wide and 200cm deep with 6 shelves - Total baking area of one oven 21.6sqm - with gas burner - with pull-out stoves - Year of construction 2007

DUMOULIN dosing turbine, for small batches or for development., 2 tanks sold with the machine: 15 and 30kg, System NEP, Waterproof? No, wait - The input is Pompe perilstatic Waston Marlow which appears to be a product name. Likely translation: Perilstatic pump Waston Marlow., Sold without its power cabinets, fan, and filtration system

8-digit rotary machine, make Breitner, type IDR 2885, year of manufacture 1985, With template – pressure vessel,, Filling range: 10 - 10,000 ml,, Connected load: 4 kW, Used for delicatessen + mustard (200 + 250 ml - jars)

used SB Ideal Bj. 2015 bread slicer MHS â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of manufacture: 2015 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on rolls, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm âœ" Power: 230 V+N+PE / 4.8 A / 1.01 kW See pictures for details. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and the

used bread slicer SB year 2014 MHS Ideal â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of construction: 2014 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on wheels, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm âœ" Performance: 230 V+N+PE / 4.8 A / 1.01 kW See pictures for details. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and the

used MHS Ideal bread slicer SB year 2013 â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of manufacture: 2013 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on wheels, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm âœ" Performance: 230 V+N+PE / 4.8 A / 1.01 kW See pictures for details. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and the

MHS Ideal Bread Slicer SB Year 2012 used â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of construction: 2012 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on rolls, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm For details see pictures. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at

used bread slicer MHS Ideal SB year 2011 â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of construction: 2011 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on rolls, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm For details see pictures. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at

used bread slicer MHS Ideal SB year 2010 â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of construction: 2010 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on rolls, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm For details see pictures. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at

Bread slicer / bread slicer - used - in working order - Type MHS Ideal SB - year of construction 2013 - mounted on 4 wheels for easy change of location - for all types of bread - exterior dimensions width: 89 cm, d.: 73 cm, height: 112 cm

Bread slicer MHS Ideal SB Bread slicer - used - in working order - Type MHS Ideal SB - Year of manufacture 2011 - 3 adjustable cutting widths (10, 12 and 14 mm) - Exterior dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm

This machine is designed for cutting stacks of paper to a specific size. Cutting length: 475 mm Insertion depth: 458 mm Width x Depth x Height: 762 x 1053x1296 mm Good condition

radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Exhaust exhaust fan: heat-resistant -Dust extraction fan: radial fan -Engine: 90 kW 1480 rpm -Connection: Inlet Ø 390 mm -Connection: Output Ø 390 mm -Fan wheel: Ø 1220 mm (drawing in the pictures) -Volume flow rate: m³/h -Dimensions: 2610/2030/H2080 mm -Weight: 1950 kg

Very good conditions

FTIR Spectrometer ID7 ATR Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my

For sale are 4 MIWE Ideal Oven 1: MIWE Ideal R 6 Cookers 120x200 EK 2Pull-Out MUCS Control GAS Burner Oven 2: MIWE Ideal R 6 cookers 120x200 EK MUCS control GAS burner Oven 3: MIWE Ideal R 6 Cookers 120x200EK MUCS Control GAS Burner Oven 4 MIWE Ideal R 6 Cookers 120x200EK MUCS Control GAS Burner

A CNC 5-axis hydro-abrasive waterjet cutting system C.M.S. Tecnocut is available. Working dimensions X/Y/Z: 3300mm/1705mm/150mm, table dimensions X/Y: 3700mm/2050mm, max. table load: 1000kg/m², rapid traverse: 40m/min, pump: CMS GreenJet Evo Electric, max. operating pressure: 4139bar, power: 34kW. Overall system dimensions X/Y/Z: approx. 5700mm/2550mm/3900mm, weight: approx. 11200kg, operating hours: approx. 1500h. The system is fully equipped except for a clamping unit for pipes. Documentation available. An on-site inspection is possible.

Fully automatic bread slicer MHS Type: MHS IDEAL SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm automatic bread grippersuitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process. Clean without having to move the machine 230 Volt / 1.0 kW / 4.8 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2011 Function checked, machine ready for immediate use!

Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data Capacity: 212 ml round plastic: up to 2,700 bph 250 ml oval plastic: up to 2,700 bph 1,000 ml round plastic: up to 900 bph 1,000 ml oval plastic: up to 900 bph Application: Glass & PEHD (plastic) Neck finish: Screw-on caps Ø 30–40 mm Twist-off caps Formats: 212 ml, 250 ml, 1,000 ml Scope of Delivery  Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min Conveyor | Breitner | TP 6052 | 2006 | — Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min Rotary Sorter | Breitner | DS 8003 | 2006 | — Feed ...

Technical Specifications Sheet, Component Group, Technical parameter, Value / Specification, Machine Brand & Model, Manufacturer / Product Series, IDROMEC T650 CLS, Year of Construction, Produktionsjahr, 2016, Compression Box, Effective Box Length, 7.0 Meters (7,000 mm), Scherkraft / Power, Nominal Cutting Force, 650 Metric Tons, Total Plant Weight, Net Structural Weight, approx. 75 Tons (75,000 kg), Operational Hours, Total Recorded Engine Hours, approx. 7,500 h, Drive / Engine, Engine Manufacturer & Type, Cummins Diesel Engine, Drive / Engine, Emission Certification Level, Tier 3A (Stage III A), Mobility & Setup, Hydraulic Support Base, 4 Heavy-Duty Hydraulic Lifting Legs, Control infrastructure, Remote System Integration, Full Multi-Channel Industrial Radio Remote Control

Offered is an electric stack cutter. Cutting length: 650mm, Cutting height: 80mm, Residual cut: 25mm, Insertion depth: 610mm, Drive: electromechanical, Control: manual with hand crank. Equipped with spare blade, blade box. Weight: approx. 200kg, Overall dimensions X/Y/Z: approx. 995mm/1260mm/1220mm. Viewing by appointment possible.

Bookbinding Guillotine Ideal 1046 - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Bookbinding Guillotine Ideal 1046 Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Bookbinding Guillotine Ideal 1046 Price: 215 EUR Download PDF Bookbinding Guillotine Ideal 1046 Cutting line length: 460 mm Maximum cutting thickness: 0.8 mm Type of cutter: scissor Safety Cover: Yes Format limiter: Yes Work table dimensions (W x D): 356 x 510 mm Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our new ...

IDEAL 7260 Pile Cutter, Year 2019 electric, cutting length 720 mm, cutting height 80 mm, automatic pressing, programmable back gauge, Light barrier, air table, Made in Germany.

Macsa id brand labeler, model MACSA IDBLOCKS 4020. Technical characteristics Year of manufacture 2014 Motor 230 V 50 Hz 2 A In your state

sheet width: 400 mm plate thickness: 3 mm stations: . total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m System with the best coiler, straightener, eccentric press, and profile rolling machine Cutting-off system and numerous accessories Iron double coiler Type SFD 2000 Schleicher straightener Edelhoff AZR 3/100 eccentric press Press force 100 t Stroke adjustment 20-110 mm Ram adjustment 100 mm Ram strokes 105 /min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can f ...

Technical data Manufacturer / model: C.M.E. S.r.l., Ideal I360 / type 1360 Serial number / year: 03401 / 2010 Flow rate / operating pressure: 36 m³/h at 3 bar Maximum pressure: 4 bar Motor power / speed: 5.5 kW / 2,900 rpm Dimensions (L × W × H): 1,350 × 730 × 960 mm Weight: approx. 325 kg Connections: DIN 65 according to DIN 11851 Product-contact materials: AISI 316 stainless steel and NBR elastomers Suitable media: wine, destemmed grapes, must, vinegar, oil, juices, and fruit/vegetable pulp Maximum fluid temperature: approx. 70 °C Performance curves: not available Spare parts: see the operating and maintenance manual with spare-parts catalogue Machine-specific operating data according to C.M.E., dimensions according to the Ideal 360” manual.

: ca. 12 - 14 Wochen ab Auf : Türkei : 21400 € : 5 mm : 1200 mm : 4,1 m/min : 3000 mm : 750 mm : 1400 mm : 1350 kg : 250 / 2000 mm : 300 mm Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system According to EC safety regulations Operating manual Optional equipment (prices on request): 1 spare blade set Flanging attachment with 1 set rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 13900 € : 266.88 € : 3.5 mm : 750 mm : 2.2 kW : 6,1 m/min : 2000 mm : 600 mm : 1400 mm : 750 kg : 200/1200 mm Rahmen aus geschweißter Stahlkonstruktion Klingen aus Spezialstahl Lange Lebensdauer der Messer dank der konisch gelagerten Wellen Getriebemotor mit Bremse System zur Einstellung des Schnittdurchmessers mit motorisierter Leistung Mobiles Steuerpult System zum Schneiden des Innendurchmessers Ausrüstung gemäß CE Regulierungen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.