id grinder used for sale

Piston for Idra 3300 multiblock, 419540, D300mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 3300 multiblock, Piston dimensions: 1) D 160mm x length 426mm (geschliffene Fläche) 2) D 300mm x length 182mm (6 Nuten für Kolbenringe) 3) D 225mm x length 54mm (1 Rille) Ca. 185kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375,  ...

Piston for Idra 1800 multiblock, 428351, D260mm, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and in its original packaging. Piston for Idra 1800 multiblock, Piston dimensions: 1) D 145 mm x length 420 mm (ground surface) 2) D 260 mm x length 153 mm (6 grooves for piston rings) 3) D 200 mm x length 52 mm (1 groove) Approx. 130 kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech ...

Replacement column for IDRA 2500, D300mm x 7360mm, (1), 181091, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7360mm, trapezoidal thread TR 300 x 10, 4082 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 2500, D300mm x 7115mm, (2), 210779, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7115mm, trapezoidal thread TR 300 x 10, 3944 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 2500, D300mm x 7115mm, (3), 110850, Strate/Idra, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7115mm, trapezoidal thread TR300 x 10, 3944 kg New! The column was manufactured by Strate, is in its original packaging and is in the best condition and ready to use. We store them in a dry and thermally insulated room. The column can be visited, tested and picked up from us at any time. We will also be happy to send you a sketch of the construction or deliver the goods to your address. Attention! We offer various columns, adjusting nuts, spar nuts and 2-piece nuts: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7410mm, (4), 240186, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7410mm, trapezoidal thread TR330 x 10, 4972 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (7), 220344, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Replacement column for IDRA 3300, D330mm x 7115mm, (8), 102016, Strate/Idra, used Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Used The column is in a used condition and is still functional. However, the surface of the column already has many surface defects. The column can be used as a reserve for emergencies or as raw material for a new D300 column. That's why this column will be sold at a particularly low price. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Adjusting nut for die-casting machine IDRA2500, TR300x10, 111814, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x375mm high. 260kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA2500, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x345mm high. 240kg Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500 The nuts are in their original packaging. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, 240186, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA3300, TR330x10, 081300, Strate/Idra, used Top Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: Used-Top The nut is used and in top condition. Adjustable nut, Tr330x10, D500x375mm high. Approx. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA3300, TR330x10, 121311, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr330x10, D500x375mm high. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra 2500 die casting machine, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr300x10, 2x550x250x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460006160202, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D510/400/365x315mm high. Approx. 240kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra die casting machine, TR330x10, 11505195.10, Druckguss Servive, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr330x10, 2x590x275x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Complete Line Consisting of 1.Sheet material unwind station (let off stand) 2. Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears, auto lubrication system with 45kW AC right angle drive motor and gearbox, Steam heated bowls up to 150c Bowl temperature monitoring system, fabricated bedplate. Overhauled in 2007 (by Iddon) with new side frame and rolls precision ground 3. Edge Trim - make: Mario Cotta 4. Guillotine - Make: Pasquato SNC 5. Wind up

Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! Attention: The current new price is certainly twice as high. If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Ref.Nr. 00885 Name of the system Mesh welding machine CE Manufacturer: IDEAL Werk - Lippstadt IDEAL 05 small Model GAE 112 Year of manufacture 2004 Revised in 2021. Diode package and transformers replaced, cables cleaned worth €32,000 Activity / Description – spot welding semi-automatic Rated power at 50% ED 2x200kVA Connected load 400kVA Primary voltage 400V Open circuit voltage 7V Nominal frequency 50-60 Hz Fuse 800 A Made in Germany Specifications: Nominal primary voltage 400 / 50 V / Hz Control voltage 24 V/DC Number of transformers 2 pieces Nominal power per transformer at 50% ED 200 kVA Connected load at 50% ED 400 kVA Fuse L1+L2 800 Amp Fuse L3 63 Amp Supply cable cross-section L1 + L2 + L3 (Lmax 90m) 2 x 240 mm2 Supply cable cross-section L3 125mm2 Supply line to the machine PE 240mm2 Supply cable PC 230V 10A 32.5mm2 Electrode  ...

S. No.: 1504369 Cutting length: 800 mm Format: DIN A3 Cutting capacity: 20 sheets (paper weight 70g/m²) Table size: 605 x 800 mm (W x D) Professional lever cutting machine IDEAL 1080 with automatic safety. The IDEAL 1080 can cut formats up to DIN A3 and also DIN A2 crosswise with a cutting length of 800 mm. The maximum cutting capacity is approx. 20 sheets of 70 grams. The stepless back stop can be locked. The sheets of paper are securely fixed before the cutting process using a foot pressure. This creates precise cuts. In addition, a transparent, fixed blade guard made of shatter-proof plastic offers optimal safety. The durable blades are made of high-quality Solingen knife steel and can also be resharpened if necessary. GS tested!

IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...

Make: Idromec Type: PN 1800, Serial no.: 044304 Condition: in working condition, Year of manufacture: 2004, PN series: several machines, solutions designed to customer`s specifications., Suitable for pressing light sheet metal waste., TECHNICAL DATA:, Engine power: 53 kW, Baling force: 100 tons, Bale size: 350 x 350 mm, Box length: 1800mm, Production from-to: 0.5-1.5 Tons/h, Weight: 11 Tons, Operating Hours: 460 h., Make: Idromec Type, Serial no.: 044304 Condition, Year of manufacture: 2004, Baling force: 100 tons, Bale size: 350 x 350 mm, Engine power: 53 kW, Production from-to: 0.5-1.5 tons/h, box length: 1800 mm, Weight: 11 Tons, Operating Hours: 460 hours

Pile cutter Ideal 4850-95 EP; cleaned and tested; Cutting width 475mm; insertion depth 450mm; Insertion height 80mm; Program memory; 2.Knife. Guillotine Ideal 4850-95 EP; cleaned and checked; Cutting Length: 475mm; Insertion depth 450mm; cutting height 80mm; program control; secound knife.

Tie bar expansion nut, adjustment nuts and split nuts for die casting machines from IDRA, Frech/Müller Weingarten, OP Die Casting Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Condition New The mother is new and fully functional. The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar expansion nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

Iddon Two Roll Mill 6” diam. x 12” wide Fully guarded and interlocked

Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely new and in its original packaging. Functional guarantee! We cannot provide a traditional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when purchasing. If the device does not work within 3 months of purchase, you can return the goods and we will refund you the purchase price.

Qty 1 x Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears (1:1), cored rolls with rotary joints fitted, auto lubrication system with 45kW AC right angle drive variable speed motor and gearbox, fabricated bedplate. Complete with controls. Also available (if required): Sheet material unwind station (let off stand) Simple Cooling unit In-line cutter Accumulator rolls (wind up)

Iddon Extruder Screw diam. 38mm (1.5”) Motor: Reyrolle AC 11/2.2HP 220-250 380-440 volts 1500/300rpm 29/16.5amps Continuous rating

Tape welding machine for sawmills up to 35mm Manufacturer Ideal Type B1 220 Volt 6 Ampere Special price

4 pcs Bronze guide bush - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm from Oleopress and Idra. Weight approx. 20 kg - Outside diameter 271/278/265mm - Inner diameter 250mm - Tube length 275mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

4 pcs. Bronze collar bushing - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm of the company Oleopress and Idra. Weight appr. 20 kg - Outside diameter 278/271mm - Inner diameter 250mm - Tube length 250mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D30 ...

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Type: LBS043 / 80 / 1.5 Coil joining machine. Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 [mm]. Used machine in working condition. Strip length: 15 – 80 [mm]. Strip width: 0.5 – 1.5 [mm]. Cvolfxlg Power: 400 [V] / 50 [Hz]. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Messer HSS für Papierschneider / paper knife HSS - guillotine Ideal 7228 / 7260 (Krug & Priester) Art.: PS4409 Ersatzteil Nr. / parts No. 9000141 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 840x100x10 mm. Number of holes M10: 6 Number of rows of holes: 2 Packaging : Disposable crate

Iddon 75mm Cold Feed Rubber Extruder With roller feed With motor, gearbox and control panel

Professional file shredder from Ideal

Paper Cutting Machine IDEAL (KRUG + PRIESTER) 4850-95EP Product No.PS5817 Year of manufacture 2007 Very good condition

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

1X RESERVE KNIFE FOR IDEAL 7225-55 EC3 LT Format (cm): 72

IDM edgebander model ACTIVA GP-R2: – MAGELIS electronic control with video – usable panel thickness from 10 to 60 mm – thickness of edges in rolls from 0.4 to 3 mm – Thickness of solid edges up to 12 mm – 2 feed speeds 12-18 mt/min – upper presser with wheels – motorized adjustment of the upper presser – machine according to CE regulations, year 2004 Operating units: – grinding unit with 2 motors – anti-adhesive unit, with nozzles for liquid – IR lamp for panel preheating – gluing unit with glue tank and upper pre-melter (3 interchangeable glue tanks are supplied) – double tilting trimmers – tilting trimmers – 2-motor rounding unit – PVC/ABS edge scraper unit – glue scraper unit – brush unit

Clampbooster CB-10 autom. Clamp Workpiece Clamping for Vise Clamping Robot Year of construction 2023 composed of: - Drive unit inkl. ISO 9409-1-50-4-M6 bracket for cobots - Control Box - Central unit with touch screen - Connection kit - Docking Plate Long Automation 67160 / 67205146160 - Spin-Socket 40012 1/2 inch 6-pt., 12mm The Clampbooster is an innovative end-of-arm tool (EOAT) designed to automatically control manual vises in robotic applications, increasing the level of automation in CNC manufacturing processes. Functionality & Purpose The Clampbooster extends a robot cell with the ability to autonomously perform clamping and loosening operations in a manual vise without the need for the vise itself to be pneumatically or hydraulically equipped. It serves as a mechanical "intermediate motor" between the robot and the vice: the robot positions the component, t ...

Key data: 300 mm, 600 mm

Iddon 24inch (600mm) x 12inch (300mm) Two Roll Mill Chilled cast iron rolls Rotary joints Right angle drive Radicon Gearbox Fulton Rotary joints AEI electric construction motor Safety bar back and front of mill

Deblister machine Manufacturer: IDI Pharma mobile