ice machine used for sale

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation - automatic CNC – controlled double-sided pre-bending - Conical bending device - three hydraulically driven rollers (one hydraulic motor per roller) - hydraulic linear under-roll adjustment - hard chrome-plated piston rods - hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics - Central lubrication system

Deburring machine, hole deburrer, bore deburrer, deburring device -Drive: 0.30 kW -Countersink -Speed: 585 rpm -Dimensions: 500/300/H460 mm -Weight: 31 kg

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power  ...

Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive  ...

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Slotting machine vice, vice for slotting machine -Span width: 110 mm -Jaws: 225 x 45 mm -Dimensions: 270/330/H155 mm -Weight: 20 kg/piece

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg

Universal Blister machine with platen sealing for pharmaceutical production incl. various format parts and LYNX-5-fill control. The machine processes ALU/PVC blisters and is suitable for tablets, dragées und capsules. The forming an packing machine operates in single stroke (ET), i.e. all stations for the main functions forming, sealing and punching operate in the same cycle, while the film runs through the machine intermittently. Output: 15-50 cycles/min. at 12 mm forming depth | 15-40 cycles/min. at 28 mm forming depth.

Inert gas welding machine, inert gas device, welding rectifier -without wire feed -Max. welding power: 350 A -Dimensions: 700/600/H1400 mm -Weight: 62 kg

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4JE-13Y-40P -Kaeltepower: 60 kW at -10ºC/40ºC, 26 kW at -25ºC/40ºC -Volume: 3 x 63.5 m3/h -Quantity in stock: 1 piece -Kealtemittel: R134 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine, upper support -Swallowtail: 86 by 73 mm 14 mm high -Drawing with the photos -Dimensions main part: 132/760/H112 mm -Dimensions intermediate part: 138/324/H55 mm -Weight: 40 kg

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H65 mm -Weight: 9.7 kg

Machine vise lower plate, clamping plate, vice plate, milling machine intermediate plate, turntable -with: T round groove -Dimensions: 270/240/H90 mm -Weight: 13 kg

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

Book Back Rounding Machine Machine No.: 520

Machine vice base plate, clamping plate, vice plate, turntable -with: T-round groove -Dimensions: 330/240/H40 mm -Weight: 10kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 111 by 134 mm 20 mm high -Drawing with the photos -Dimensions: 290/90/H225 mm -Weight: 12 kg

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 145 by 190 mm, 30 mm high -Drawing with the photos -Dimensions: 290/85/H210 mm -Weight: 12 kg

Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW at 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.7 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.3 kW at 2800 rpm at 50 Hz -Voltage: 380 volts -Receiving shaft: Ø 24 mm -Tool: Ø 118 mm -Dimensions: 380/200/H240 mm -Weight: 25 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Connection plug broken -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

PALLETIZER KRONES ALONG WITH THE CONVEYORS AS SHOWN IN THE DRAWING ATTACHED Palletizer KRONES PRESS UNI, production year 2007. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, • Divider, • Packs turner Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 148 by 178 mm by 30 mm high -Bore diameter: 45 mm -Drawing with the photos -Dimensions: 300/80/H255 mm -Weight: 14 kg

Veneer joining machine with pneumatic voltage Cutting length 3m L x W x H: 3.5 x 1.2 x 1.7 m Year of construction 1996 Weight approx. 550 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Machine vice, stable vice, drill press vice -Vice: rotatable -Jaw width: 200 x 55 mm -Clamping depth: max. 170 mm -Dimensions: 600/270/H210mm -Weight: 81 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1 kW 17030 rpm at 300 Hz -Voltage: 165 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 280/60/H110 mm -Weight: 4.3 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: each 150 by 181 mm 48 mm high -Drawing with the photos -Dimensions: 390/115/H310 mm -Weight: 34 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 125 by 160 mm 25 mm high -Drawing with the photos -Dimensions: 300/110/H205 mm -Weight: 14 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/80/H170 mm -Weight: 4.7 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW at 11300 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.05 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 16 mm -Tool: Ø 70 x 25 mm -Dimensions: 285/60/H140 mm -Weight: 3.6 kg

Max Size 520 x 850 mm Min size 100 x 120 mm 4 Buckles Noise hoods High speed feeder head Digital counter with program 1 Electronic knife Hook on shingle belt delivery Implant machine Very good conditions

Number of milling spindles: 2 St. fence: 1 ja workpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten  ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...

We sell a pietroberto fork kneader. The machine is ideal for flatbread doughs. Used and overhauled / Warranty

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Grinding discs: max. Ø 360 mm x 40 mm -Operating voltage: 380 volts -Dimensions: 760/450/H1080 mm -Weight: 200 kg

Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Machine reamers, reamer, reaming tool, locating knife cutting set -Recordings: MK1/MK2/MK3 -partially with reversible inserts -various sizes as seen in photos -Sale: only complete set -Weight: 40 kg

Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm

Reference Num.: 3384 Brand: Herzog Heymann Type: M3 + S18 Construction year: 1969 Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Flachstapelanleger - Schuppenauslage - Falzwerk Typ S18 mit 4 Taschen

Reference Num.: 3527 Brand: MBO Type: T 500 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - Format 50 x 70 cm