ice block used for sale

SALES MANDATE ITV Orion 40 Ice Machine Approximate production: 40 kg / 24 h Type of ice: solid cube Air cooling Integrated tank Professional use in hospitality Condition: unused Not tested Auction-ID: A7-44748-66

Ice Cream Scoop Inox No. 1/55 NEW Stainless steel with plastic handlesManufacturer : InoxLiter 1/55 à ̃ mm 41 Details see picture

Hoshizaki Ice Maker Stainless SteelProduct descriptionManufacturer: Hoshizaki Ice MakerMod.: FM-480AKE-HC-SBstand: used, functional, baker's condition - please clean thoroughly before useMaterial: Stainless steelYear of construction: Unfortunately it is not on it but probably a few years oldWith reserve containerStandard voltage: 220-240 V~ 50 Hz 5.3ADedetails see pictures.

Ice cream scoop Inox  No. 1/60 NEWabove mentioned price for 2 piecesstainless steel with plastic handlesManufacturer : InoxLiter 1/60 à ̃ mm 40 Details see picture

Ice cream cone container Hygia-Italia NEW!  Ice cream cone container Hygia-ItaliaMade of stainless steelWith plexiglass hood coverRemovable aluminium additional shelfWith 15 mm holes for cone tip holderDimensions: height 570 mm, upper diameter 290 mmBottom diameter 200 mm see picture for details

Ice cream scoop Inox  No. 1/65 NEWabove mentioned price for 2 piecesstainless steel with plastic handlesManufacturer : InoxLiter 1/65 à ̃ mm 38 Details see picture

Ice cream scoop Inox No. 1/30 NEW above mentioned price for 2 piecesStainless steel with plastic handlesManufacturer : Inox liter 1/30 à ̃ 49 mm Details see picture

Ice cream scoop Inox No. 1/16 NEW Stainless steel with plastic handlesManufacturer : InoxLiter 1/16 à ̃ mm 58 Details see picture

Ice Cream Scoop Inox No. 1/20 NEW Stainless Steel with Plastic HandlesManufacturer : InoxLiterâ 1/20 à ̃ mm 56 Details see picture

Ice cream scoop Inox No. 1/24 NEW stainless steel with plastic handlesManufacturer : InoxLiter 1/24 à ̃ mm 51 Details see picture

Flake ice machine FUNK stainless steel approx. 60x60x130h cm, 400 V, nameplate not found, purchased in 2005 for 5,200 EUR net

Ice cream press, shaper, spaghetti ice cream press, ice cream press cup -made of stainless steel tube: Ø 79 mm -Shape: Spaghetti 44 pieces available -Holes: Ø 3 mm -Shape: wide pasta, tagliatelle, lasagne, 24 pieces available -Slot: 4 x 49 mm -Price per piece -External dimensions: 160/79/H78 mm -Weight: 0.45kg

Produces 30 kg of ice cubes per 24 hours, storage capacity of 13 kg. Viewing by appointment. Auction-ID: A1-40237-44

IN WORKING CONDITION. TESTED FOR FUNCTION There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-44605-28

Volume: 222 hl, Temperature: 20 °C, Width: 2,1 m, Height: 9 m, Weight: 3000 kg, Base construction: insulated and covered, Features: manhole

IN WORKING CONDITION. TESTED FOR FUNCTION There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-44605-93

technical data: Make: Möhringer Type: for block pull kW: 5 kW Rpm: 34 rpm, 40% ED Shaft diameter motor: 50 mm

With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providing hi-speed mould feeling and final product compaction. The rigid mechanical structure of the vibrating table and vibrators ensure hi durability and low maintenance. PRO 400: • Production board s ...

BRICK FACTORY, RED BRICK, CLAY BRICK PLANTS - second hand, used, We offer also DE montage and Montage. Also control renewing. Porenbetonwerk, Kalk Sandstein Werk, Dachziegelwerk, Ton Ziegelwerk, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Clay brick plant, ERICH PETER MACHINES-PLANTS GMBH A-7083 Purbach Hofgartengasse 7 Phone: +43 664 3358378 Mail: office@machines-plants.at Web: www.machines-plants.at

Euroblock 12 movable block machine offers a very wide production range of concrete products. It can be used as a universal machine as well as special product making machine. This multi-purpose block machine can be used for the production of: Hollow blocks Chimney blocks Hourdy blocks Insulated blocks Garden blocks Solid blocks Curbstones Paving stones with or without face mix Layers separated by plastic foil or by sand. With its standard safety devices, rigid frame construction that allow heavy duty use, and simplicity of design that reduce maintenance to a minimum, this machine is the most economical choice for a very wide range of concrete products manufacturers. Useful area: 1290 x1130 mm (product height 170 ? 250 mm) Useful area: 1290 x900 mm (product height 250 ? 500 mm)

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

6 STANDS ROD FINISHING BLOCK WITH 3 UPPER & 3 LOWER UNITS IN A V-SHAPE 170 MM DIAMETER DISCS TO PRODUCE DIA. RODS OF 5.5 TO 12 MM, 60 M/SEC.,

NEVER INSTALLED! - IS DESIGNED TO USE 170 MM DIAMETER DISCS TO PRODUCE RODS OF DIAMETER 5.5 UP TO 12 MM.

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

4 pieces same batteries 24 V

Block/SOS bag machine with flat inside handle device, Carrier bag machine, 53bb + 43ct Bag width: 14-32cm Bottom width: 6-20cm Tube length 35-70cm with fotocell for preprinted paper, 1 ply option: 2 plies option: 4 or 5 colour tail end printer

RECON Part number: 303120B ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us

RECON Part number: 0405 2744 engine number: 7300533 ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us

We can offer: Windmoeller & Hoelscher Type : Triumph 1 Year: 1980 Bag width 50 - 120 mm. Tube length 120 - 340 mm. Bottom width 35 - 70 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels We also have available a suitable 2 and 4 colour tail end printer

RECON MWM TBD604-BV12, MWM TBG604-BV12 Part number: 1204 7301 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Mak 6M20 Block Very Good Condition for sale

We can offer: Fischer + Krecke Type : Combi 31bb Year: 1980 Bag width 90 - 260 mm. Tube length 250 - 470 mm. Bottom width 40 - 140 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels

RECON Part number: 300094 Engine number: 3269801 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Yanmar 6N18AL

Design of PRO 1000 concrete products machines put this machine beside most flexible in the world. The most versatile machines in their class, the PRO machine series offers the largest variety of handling and cubing systems available. By upgrade of handling the equipment on the wet and dry line side, the capacity of complete installation can be increased significantly. Double layer products are easily produced with and optional face mix device. Pallet size: 1400 x950 mm Useful area: 1350 x850 mm Paving stones 10x20x6 cm Production capacity in 8h 1355m2 Hollow block 20x20x40 cm Production capacity in 8h 17280 pieces

RECON Part number: 1216 2655 / 2656 of 1216 Engine number: 232.12.02144 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Part number: 1216 3892 Engine number: 234.12.03352 Std. size ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

- Ganged Valve MWM 12301106 - Suitable for several motors - Please note! Price per piece! - 12301106 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new t ...

RECON Part number: 1216 3891 Engine number: 2200988 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Part number: 1230 0506 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.

Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Pile height 330 mm max min 80 mm Infeed height 890 mm max min 860 mm Speed max 900 Pack. / h

RECON Pn. 1213 3885 #604.16.010139 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Saw mill vertical Boegli Weight 4000 kg L x W x H: 200 x 160 x 330 cm Roll diameter 1250 mm Stem á 1.2 m, with mechanical clamping cars 9 m Chuck Wagon L x W x H: 900 x 200 x 170 cm Weight approx. 6000 kg Built 1952 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

RECON ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

; ready for operation

; ready for operation

RECON Part number: 0422 7127 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Used but reconditionable #25442 Used: 750€ Recon: 3800€ ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us