i d e used for sale

Inductive sensor, electronic sensor, safety switch, inductive proximity switch -Manufacturer: efector, inductive sensor proximity switch unused original packaging -Product Type: IIBE 2020-FROG -Number: 3x sensor available -Price per piece -Dimensions cardboard: 135/65/H45 mm -Weight: 0.2kg/carton

Inductive sensor, electronic sensor, safety switch, inductive proximity switch -Manufacturer: efector, Inductive sensor proximity switch, unused, original packaging -Product Type: IN-3004-BPKG / IN5129 -Quantity: 1 sensor available -Price: per piece -Cardboard dimensions: 150/125/H30 mm -Weight: 0.1 kg/carton

Inductive sensor, electronic sensor, safety switch, inductive proximity switch -Manufacturer: efector, inductive sensor proximity switch unused original packaging -Product Type: ITB 3001-BPOG -Number: 2x sensor available -Price per piece -Dimensions cardboard: 150/125/H30 mm -Weight: 0.1kg/carton

Control PC-NC Dialog Travel X/Y/Z: 1000/1510/700 mm C-axis 30-fold electrode changer Hirschmann clamping system Bearing surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

electrically operated chamber furnace with air circulation , as good as new electric heated chamber furnace with air circulation, as good as new Type: EKO - 60/40/150-36 Year built/year: 2010 Fabr./ make: IOB Aue/ Germany Working space/ inner space 600 x 1500 x 410 mm Temperature range/ range of temperature: 500°C Connection value Electr./ electr.power: 38 kW Weight / weight: about 2.5t https://www.west-cs.de/produkte/modelle/ks-90-1-einkreisregler/

Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system

Excistar S-Industrial VB.02.0441 The TUI LASER Excistar S-Industrial VB.02.0441 is a high-precision excimer laser with a wavelength of 157 nm, designed for demanding industrial and scientific applications. In combination with the MBraun Labmaster, this system offers a controlled, clean process environment and meets the highest requirements for stability, reproducibility and process reliability. Thanks to its extremely short wavelength, the Excistar S-Industrial is ideal for microstructuring, photolithography, surface modification and sub-micron material processing. The laser enables cold ablation processes with minimal thermal interference – perfect for sensitive materials such as polymers, glasses or special coatings. Your advantages at a glance: Excimer laser technology with 157 nm for highest resolution Industrial-grade design for continuous operation Excellent pul ...

weight max. in kg: 1200 kg fork length: 1150 mm stroke height: 2700 mm high: 2256 mm weight of the machine ca.: 0,625 t dimensions: 1,71 x 0,8 x 1,96 m The ESL122 is a 24V/80Ah lithium-ion powered electric forklift. It is equipped with a high-strength chassis and a high-rigidity mast that ensure high operational stability. Offering comfortable maneuverability and efficient and effective vertical stacking, this model is ideal for operations in tight spaces. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OPS INGERSOLL GANTRY EAGLE 800 Year of construction 2013 EAGLE Powertec PC/NC Controller 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn Quick Programming Powertec Handheld Multifunctional Handheld Controller Manual EDM with Powertec Handheld EAGLE Powertec - Fine Finishing Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disc magazine Work container (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system incl. fire damper Electrode clamping system EROWA ITS ECOTEC Energy Saving Func ...

Made in Germany Electrostatic Suction capacity: max 1800 m³/h, Fan power free suction 2400 m³/h, Engine power: 0.75 kW, (Siemens), Dimensions: L 1,765 x W 670 x H 700 mm Weight: 130 kg, Operating voltage: 400 VAC, 50 Hz, Power consumption, 1.85 Va

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: 22 mm -Design: B5 -Protection class: - -Price: per piece -Quantity: 1 available -Dimensions: 320/200/H225 mm -Weight: 17 kg

Key data: 90 KW, 1485 1/min

TECHNICAL SPECIFICATIONS Manufacturer: ELEKTRA Elektromotoren Dillingen Description: Electric drive motor Type: IEC squirrel cage motor (EN 60034) Power: 90 kW Speed: 1485 1/min Frequency: 50 Hz Standard voltage: 400 V Design: IM B3 Degree of protection: IP 55 Weight: 580 kg SPECIFIC COMMENT - Incl. 1 flywheel extra

Three-phase motor, electric motor -Power: 11 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 610/410/H330 mm -Weight: 100 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary encoder -Manufacturer: TR Electronic, rotary encoder encoder -Type: IE58A -Art.No: 219-00074 -Shaft: Ø 6 x 12 mm -Dimension: 85/58/H70 mm -Weight: 0.4 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V260-S -Welding power: max. 260 A -Dimensions: 475/200/H345 mm -Weight: 16.5 kg

Engine Brand: CNH IVECO, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/218701, , = More information =, , Type: Engine, Type number: 667TA/EBA; Transport weight [kg]: 540

weight max. in kg: 1200 kg fork length: 1150 mm stroke height: 3600 mm high: 2450 mm weight of the machine ca.: 0,645 t dimensions: 1,71 x 0,8 x 2,45 m The ESL122 is a 24V/80Ah lithium-ion powered electric forklift. It is equipped with a high-strength chassis and a high-rigidity mast that ensure high operational stability. Offering comfortable maneuverability and efficient and effective vertical stacking, this model is ideal for operations in tight spaces. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1200 kg fork length: 1150 mm stroke height: 2700 mm high: 1990 mm weight of the machine ca.: 0,595 t dimensions: 1,71 x 0,8 x 1,96 m The ESL122 is a 24V/80Ah lithium-ion powered electric forklift. It is equipped with a high-strength chassis and a high-rigidity mast that ensure high operational stability. Offering comfortable maneuverability and efficient and effective vertical stacking, this model is ideal for operations in tight spaces. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1200 kg fork length: 1150 mm stroke height: 3000 mm high: 2150 mm weight of the machine ca.: 0,625 t dimensions: 1,71 x 0,8 x 2,15 m The ESL122 is a 24V/80Ah lithium-ion powered electric forklift. It is equipped with a high-strength chassis and a high-rigidity mast that ensure high operational stability. Offering comfortable maneuverability and efficient and effective vertical stacking, this model is ideal for operations in tight spaces. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 3500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V/280AH Li-ion weight of the machine ca.: 5,0 t dimensions of the machine ca.: 3,94 x 1,23 x 2,25 m New EP EFL 352 with LI-ION battery and charger. Triplex mast of 4.8 meters Load capacity of 3500 kg Headroom of 2.25 meters with sideshift and 4th hydraulic function 5 year guarantee on the battery and 1 year on the forklift. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ELITechGroup Model: InGenius Type of Machine : PCR machine ELITe InGenius® is an easy-to-use sample-to-result solution dedicated to Molecular Diagnostics which integrates extraction, amplification and result interpretation with an unprecedented flexibility and assay menu possibility. ELITe InGenius® processes 1 to 12 samples in parallel and independent tracks. It features a universal extraction process with multiple and independent PCR enabling the laboratories to create and run custom panels of assays on demand. ELITe InGenius® offers laboratories an unlimited menu capability, combining the largest CE-IVD infectious disease menu available on a sample-to-result instrument, with a real open capability. Benefits - Full Automation - Bench-top instrument integrating all the steps of molecular diagnostics: automated nucleic acid extraction, real-time PCR amplification, a ...

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

General SKU345S1128 LocationBarneveld MakeBarriquand Type IJS 1x24/1x25x350x2250 37,8 m² No.24059E1 Year of construction1994 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Surface37.8 m2 Size length1970 mm Sizes width261 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerswelded Heating surface37,8 m² CapacityCircuit A: 54,5 Ltr., Circuit B: 60,3 Ltr. ConnectionsDN50, DN100 (2x), DN200 (2x) Max. temperature-30/200 °C Information Total height1 m Weight1030 kg Floorspace3x1,05 mPlate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

General SKU212T495 LocationBarneveld MakeBarriquand TypeIXASP 7+6/12X1x1000x220 No.26070 E Year of construction2001 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface4.3 m2 Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Number of stages:1 Heating surface4,3 m² Capacity35 Ltr. Max. temperature-10/200 °C Information Total height1,1 m Weight500 kg Floorspace1,25x0,5 mPlate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU345S1099 LocationBarneveld MakeBarriquand TypeIXS 2x4+5/3x4x1250x160 No.E 24089-100E Year of construction1994 Main Features MaterialStainless steel Shell (Material)Stainless steel Surface3.6 m2 Size length1240 mm Sizes width160 mm Specified Features - Plate heat exchanger Plate heat exchangerswelded Heating surface3,6 m² CapacityCircuit A: 9 Ltr., Circuit B: 24 Ltr. ConnectionsDN40 (2x), DN80 (2x) Max. temperature-30/200 °C MaterialStainless steel 1.4571 (316Ti) Information Total height0,55 m Weight280 kg Floorspace0,58x1,4 m Extra SpecificationsCondenser Plate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU345S691 LocationBarneveld MakeBarriquand Echangeurs (FR) TypeIXASP 1x15/1x14 x 2000 x 280 No.24039E2 Year of construction1994 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface13.4 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangersPlatular Heating surface13,4 m² Capacity40 Ltr. and 95 Ltr. (shell) Max. temperature-30/120 °C Information Floorspace2,8x0,6 M Total height1,0 M Weight850 KGPlate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU345S1087 LocationBarneveld MakeBarriquand Echangeurs (FR) TypeIXASP1x15/1x14x2000x280 No.24039E3 Year of construction1994 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface13.4 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangersPlatular Number of stages:1 Heating surface13.4 m² Capacity40 Ltr. Max. temperature-30/120°C Information Total height1,0 m Weight850 Kg Floorspace2,8x0,6 mPlate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU259P364 LocationBarneveld MakeITT standard plateflow (usa) TypePF 35 No.A50535-01 Year of construction1995 Pressure Working pressure10.3 Bar Main Features MaterialStainless steel Surface13 m2 Size length380 mm Sizes width350 mm Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Heating surface+/- 13m2 Number of platens41 Plate sizes380x850 mm Connections(4x) 110 mm Max. temperature110 degr.C Information Mounted on framecheck Floorspace0,9X05 M Total height1,0 M Weight500 KG Technical specs Extra informationindicated size is platen sizePlate heat exchangersITT Standard BuffaloHeat exchangers > Plate heat exchangersBrand > ITT Standard Buffalo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

General SKU332X713 LocationBarneveld MakeIgefa Weinbrenner Type061U-600-600 No.50467 Year of construction2014 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface41 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface41m² Tube capacity582 l. Number of tubes:178 Tube diameter33,7 mm Tube length2200 mm Wall thickness tubes2 Max. temperature0°C/+200°C Shell capacity252 l. Shell diameter600 Shell length2500 Max. temperature0°C/+200°C Shell connectionsDN80 Cover connectionsDN500 Information Mounted on framecheck Total height2,60 m Weight1959 kg CEcheck Floo ...

Linear weigher: Gentle and precise filling technology Our linear scale is the ideal solution for easy and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to the minimal drop height, product damage is effectively avoided, which ensures the quality of your goods, even with delicate products. Flexible and efficient operating principle The core of our technology is a simple but extremely effective operating principle: The products are transported via linear conveyor belts or vibratory troughs and dosed into weighing containers in a targeted manner. Features: - Easy operation and cleaning - Convenient control via color touch screen - Storage for various weighing recipes - Precise weighing results thanks to three-stage weighing coarse / medium / fine weighing, individually programmable - Tool-free format changeover. - Intuitive  ...

2011 OPS Ingersoll Gantry Eagle 5 (often referred to as the Eagle G5 or Gantry Eagle 500) is a high-precision Sinker EDM (Electric Discharge Machining) machine. Feature Specification X / Y / Z Travels 525 mm / 400 mm / 450 mm Work Tank Type Drop-tank (rises/falls for easy access) Max Workpiece Weight 1,000 kg (2,205 lbs) Generator Eagle PowerSPARK (60 Amp standard, 110 Amp optional) Z-Axis Jump Speed 18 m/min (This is exceptionally fast for EDM) Find more here - / Contact us at -

General SKU292W1597 MakeTransitherm LocationBarneveld TypeAD2000 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface25m² Tube capacity235 l. Number of tubes:91 Tube diameter25 mm Tube length3700 mm Max. temperature0°C/+300°C Shell capacity210 l. Shell diameter400 mm Shell length3840 mm Max. temperature0°C/+300°C Shell with expansion jointcheck Shell connectionscheck Information No.11043 Year of construction2004 Mounted on legscheck Floorspace0,70 x 0,70 m Total height1,20 mShell and tube heat exchange ...

General SKU013Z067 MakeWaiweldai Anlagentechnik GmbH Grünsfeld TypeIndustriefilter Kartusche No.21029 Year of construction1998 LocationBarneveld Pressure Working pressure jacket0.05 Bar Main Features MaterialStainless steel Motor2.2 KW Surface4 m2 Specified Features - Envelope filter Envelope filtercheck Filter surface± 4,0 m² Number of envelopes:16 Envelope sizesdia. 140x600mm Cleaning by air pulsecheck Motorfan 2,2 KW, 220/380 Volt MaterialStainless steel Information Floorspace1,3x1,3 M Total height3,4 M Extra Specifications- Fan capacity unknown , Silo Ø 1.14x2.7m Technical specs Extra informationjacket working pressure is +/- 50 mbarEnvelope filtersWaiweldaiDust separators > Envelope filtersBrand > Waiweldai What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...

PlateDriver Compact; good condition; maintained and checked by customer service; new pressure rollers; Violet Laser 60 mw Laser; with computer and software; Min. Plate size 340x400mm, max.615x745mm; Printing plate staerke 015-0.30mm; Dislocation 2540dpi; Machine is transport-secured; with development machine Heights Inca P 70 Y.O.; cleaned and checked; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such  ...

Drive control system Weiss, EF1503A, EPZ10201 APPL + Inv 8200, Lenze, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, is in its original packaging, has never been used and is completely new. Also suitable for controlling a Weiss rotary indexing table Includes documentation 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...

From insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Infinitely variable speeds per potentiometer 80-2010rpm automatic feed 0.1--0.2--0.3 Digital speed display Coolant pump Tapping function with foot switch Work light Pinol stroke 150mm Projection 300mm Recording MK 4 Drill chuck Röhm Supra 3-16mm Table clamping surface 330x320mm Height of machine 1930mm Weight approx. 350kg 3KW Power 380 volts

Iba-E35 used column drilling machine. Drilling capacity: 35mm. Table: 525x525mm. 9 speeds. (70-1406rpm). CE certificate for european used machines.

Air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg

Compressed air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Price: per piece -Dimensions: 640/365/H125 mm -Weight: 22 kg

Key data: 400 KW, 500 kVA, 400 V

The largest model in Electroquell's range. The 500 kVA (400 kW) generator with a Ricardo motor is suitable for shopping malls, industrial plants and large investments. Ricardo Motor ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing Drip pan Possibility of continuous operation 24 hours a day Power: 500 kVA / 400 kW Voltage: 400 V Current: approx. 722 A Fuel: Diesel EN 590 Additional options: ATS system, remote communication, cooler for 55 degrees Warranty: up to 60 months