i cold used for sale

Specifications: Master and model inserts Length: 6.5 m Width: 2.3 m Number of lifting arms: 4 - heavy insertion arms - with built-in tapered rollers - Substructure in heavy steel construction - built-in roller rails - 4 strands with roller rails Condition as new, with functional review, to the exclusion of any Warranty

Specifications: Master and model inserts Length: 5.7 m Width : 1,7 m Number of lifting arms 5 - heavy insertion arms - Substructure in heavy steel construction - built-in roller rails - 5 strands with roller rails Condition as new, with functional review, under exclusion of any warranty

Available in stock 1 x Used Injector Nozzle Test Stand. Use the injector nozzle test stand to verify the shape and atomization of the injected test fluid and to leak test the needle seating. The equipment is used but in good working conditions.

Available in stock 1 x Used Kiene Cylinder Pressure Indicator Model K-107. Indicator equipped with a 4” diameter, dual range (0-3000 PSI/0-210 Bar), liquid-filled bourdon gauge with an FRP case. Indicator furnished complete with a carrying case. Design Features: - Quick attachment to standard indicator valves; - High accuracy, liquid-filled, dual scale pressure gauge; - Minimum space required for installation; - Components designed for low maintenance, long life operation. The equipment is used but in good working conditions.

Available in stock 1 x Used Capstone IGBT ECM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

MIG/MAG hose package extension, intermediate hose package -Length: 11.0 m -Plug -Water cooled -Weight: 10 kg

Available in stock 1 x NEVER USED Capstone Igniter (P/N 516853-001). The equipment was NEVER USED and it is sold inside the original packaging. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

For sale: Cardboard Packer Meurer CM/TP 25-B 400. The machine worked in the Tetra Pak line. Carton type: 1000 ml Prisma on request, I will send a description of the machine and photos.

MIG/MAG hose package extension, intermediate hose package -Length: 10.0 m -Plug -Water cooled -Weight: 10 kg

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Switch cabinet cooler, SK250E2V-20100, BKW, mint condition Special price The current price of a similar product is € 4.800 excl. VAT If you have a VAT number, we will gladly issue you an invoice without VAT. Mint codition! We have tested the switch cabinet cooler - it cools immediately! The part was purchased from a spare parts warehouse of a company, had been in stock there for some time (built in 1998), according to its condition it had never been in operation. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange,  ...

Available in stock 1 x NEVER USED Capstone IGBT. Most commonly used for Microturbines C60. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h  ...

Digital input module, control, switchgear, PLC -Inputs: 16 -24 V DC -Product number: 7DI439.7 -Dimensions: 82/115/H60 mm -Weight: 0.2 kg

Ex signal isolator, isolated barrier -K series -Product number: 14493S -Explosion proof -Number: 5x available -Price: per piece -Dimensions: 95/70/H18 mm -Weight: 0.1 kg

Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves

Lightbus combination input/output module, input/output module, parallel input/output -Manufacturer: Beckhoff, input-output module -Type: M-1400 -Input voltage: 24V DC -Price per piece -Number: 9x available -Dimensions: 270/75/H70 mm -Weight: 1kg/pc.

MIG/MAG hose package extension, intermediate hose package -Length: 11 m -Plug -Water cooled -Weight: 20 kg

MIG/MAG hose package extension, intermediate hose package -Length: 11.0 m -Plug -Water cooled -Weight: 20 kg

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool, internal deburrer -for diameters: 20 - 60 mm -Recording: MK 3 -Quantity: 1 piece internal chamfer cutter available -Price: per piece -Dimensions: Ø 70/208 mm -Weight: 1.7 kg/piece

Pressure reducers, pressure regulators, liquid nitrogen containers -for: e.g. liquid nitrogen -Contents: 10 liters -Operating pressure: 3 bar -Dimensions: Ø 305/560 mm -Weight: 9 kg

MIG/MAG hose package extension, intermediate hose package -Length: 10.0 m -Plug -Water cooled -Weight: 16 kg

MIG/MAG hose package extension, intermediate hose package -Length: 11.0 m -Plug -Water cooled -Weight: 12 kg

Internal quick probe, length measuring device, internal precision measuring device, internal measuring device, internal measuring probe, micrometer screw -One revolution of the drum corresponds to: 0.5 mm -Interior measuring device -Measuring range: approx. 800 - 1500 mm -Weight: 5 kg

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630 bar Screw length: 22 l/d Plasticizing current: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, Specific spray pressure 1960 ...

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves

NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.

Pressure reducers, pressure regulators, liquid nitrogen containers -for example, liquid nitrogen -Contents: 3.5 liters -Operating pressure: 3 bar -Price: per piece -Quantity: 2 pieces -Dimensions: Ø 193/360 mm -Weight: 4 kg

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...

MIG/MAG hose package extension, intermediate hose package -Length: 9.0 m -Plug -Water cooled -Weight: 12 kg

MIG/MAG hose package extension, intermediate hose package -Length: 9.0 m -Plug -Water cooled -Weight: 12 kg

Tapping machine, pipe thread cutter -for pipe size: max. 2 inches -with: cutting jaws -Speed: rpm -Foot switch with emergency stop function Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1200/660/H1250 mm -Weight: 166 kg

Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinder, center grinder -Image below: MK5 -grinding wheel mount: -Motor data: 0.3 kW 1380 rpm -Dimensions: 370/180/H480 mm -Weight: 36 kg

Ball valve, ball valve internal thread -Pressed brass -Internal thread: 2 inches -full: passage, full ball -Number: 63x ball valves available -Price: per piece -Weight: 2.1 kg

Internal quick probe, length measuring device, internal precision measuring device, internal measuring device, internal measuring probe, micrometer screw -Interior measuring device -Measuring range: 25 - 50 mm -Weight: 0.5 kg

32 ignition coils and 16 spark plugs from Jenbacher J316 for sale The price for coils and spark plugs is 20 € each.

Input module for valve terminals -Type: VIGE-03-FB-8-5POL -Inputs: 4 -5- pole -175555 -382344 -Dimensions: 42/67/H132 mm -Weight: 0.37 kg

Leybold Optics H3200 it is a horizontal inline sputtering system H3200 for the separation of Cu - In-Ga layers, glass substrates, which are coated from above, run continuously in this, it is a universal system for glass coating / architectural glass coating with 3 large process chambers and 8 infeed and discharge modules 3 modules of 650 mm run side by side in the process   the plant is as good as unused, (it did not come to production, only sporadic attempts), is already dismantled and stored in the north of Brandenburg Year of construction 2009 , plant number 070817 Type H3200 Original price of the inline sputtering system (2009): 5.600.000,- € the sales price is net plus VAT incl. loading and transport for Germany Dimensions : 24,335 m x 4,30 m Weight: approx. 120 t the three process chambers are special transports incl. all parts and document ...

PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters. Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feede ...

SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels

ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60

Miwe proofing room GR -Miwe proofing room -Year of construction 2013 -15.58 kW -400/230V 3/N/PE 50Hz

Dear Sir or Madam, As good as new unused 1x concrete station with 4x 680KVA inverter 1xTransformer station with switchgear see photos for details

Bottler with 4 x filling head (additional device for lateral movement for filling dough/mass strips) in elongated shapes Item condition:maintained Availability: immediately

One Way Filling line for Beer Capacity: 4000 bph Installed for 0,33 liter Stubby Bottle, 0,33 liter Steinie Bottle Holdefleiss 24 head counter pressure filler with 6 head crowner model early 70. Fimer Rinser 16 head 3-4000 bph. Year? (From kahl Schlichterle 2016) Gernep Labetta labeler 6-480 SK 3-4000 bph. Year 1996? Depall. Dansk Maskinmontasje 2016 Side Grib Conveyor, Carry Line 2016 Bottle conveyors. Dansk Maskinmontage 2016

Film imagesetter Linotronic 630 Post Script RIP 50 exposure format: 483x450mm (19x17.7inch) without register option 483x428mm (19x16.9inch) with register option Material width film: 280,310,340,370,400,430,460 mm Min. width and length not specified Dimensions (W x H x D) 820 x 890 x 960 mm (32.2 x 35 x 37.8 inch)

RECON valve bridge inlet and outlet MAK M43B and M43C MAK Part Number Inlet: 433515-100 MAK Part Number Outlet: 433515-200

Boyens Jelly compact glaze sprayer Serial: 1500112073 2012, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph