129,145 used machines on RESALE, but how to find them? Machine Search
A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.
used
7 assen: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada-bombardement Capacity: 125 ton x 3100 mm Backgauge: CNC Control: Delem DA65R Passage between uprights: 2600 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Length: 3245 mm Depth: 1940 mm Height: 2415 mm Weight: 7,7 ton
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Fully automatic hydropneumatic machine · Left/right miter cuts · Head bevel cuts up to 45° (shifter) · Material feed unit with material clamp · Integrated coolant spray system · MPS control: · Saves cut start/end times · Displays power consumption, workpiece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=0.96 m, Overall length= 1.2 m, Overall width= 1.2 m, Net weight= 120 kg,
Height=1.22 m, Overall length= 0.57 m, Overall width= 1.03 m, Net weight= 155 kg,
Height=1.88 m, Overall length= 0.7 m, Overall width= 3.25 m, Net weight= 850 kg,
Height=2.09 m, Overall length= 1.08 m, Overall width= 2.25 m, Net weight= 1610 kg,
Power : 68kW at TC -25°C (ΔT 6 K) Temperature range : -40°C to 55°C Flow rate : 90000 m³/h Slats : 495 m² Volume : 117 litres Weight : 923 kg with 6 fans 630mm, with 2 refrigeration circuits at 50% each with defrost heater see nameplate Only been in operation for 1 year, condition as good as new 2 pieces in stock Price on request
Qty. 1 Second-hand extrusion press line Mfc.: Breda Sutton, Cometal, OMS Type: oil hydraulic, Dia.: 7 inch, 178 mm Force: 1600 MT Built: 1977 Fully reconditioned in 1995 Scope of supply: Log feeder Billet Furnace Hot Shear Extrusion Press Run-out Table Puller Cooling Bed Stretcher Finishing saw Aging Furnace Die Furnace
Like NEW! Never used Inductive hardening machine for bolts M8 and M10 with year of manufacture 2019 The equipment is designed for automatic inductive hardening of screws and bolts M8 and M10. The plant was built by the company Grimm Zuführtechnik. It is designed for approx. 70-80 parts per minute (depending on the component) and has various monitoring options (temperatures, component heights, component types, rotation, etc.). The components are conveyed from a hopper belt via a steep conveyor to a linear sorter and from there are separated and transferred to an 8-station indexing table with 2 nests per station. A 50kW HF generator from IDEA is connected, which provides further monitoring (energy quantity, earth fault monitoring, flow quantity and water temperature of the inductor, etc.). The plant has its own tank for quenching water, from which the components are transported out ...
Manufacturer: MiSeq Model: Illumina Year of Manufacture: 2015 the device has performed 472 runs so far. Electrical Information - Line Voltage: 100V–240V - Frequency: 50/60Hz - Power Consumption: 400W Find more here - / Contact us at -
IHI TURBO OIL FREE COMPRESSOR WATER COOLED For any enquiry, please contact : 1. email: yytantopglove.com.my 2. Contact number: i. Aaron Tan: +6017-369 8203
SPECIFICATIONS Free Air Delivery 70.7cfm/2002lpm Pump 3000 cast iron NO. of Cylinders 3 Compression Stages 3 Free Speed (rpm) 780 Oil Limit alert Switch STANDARD Auto Condense Drain NO Motor Size 15kw/20hp Power Type 415v 50Hz electric Engine N/A Drive Type Belt Working Pressure 175psi/1200kpa Starter Star Delta Starter Constant/ Dual Controls STANDARD Centrifugal Unloader STANDARD Air Tank Capacity (L) 445L Mounted Type Tank Mounted Weight (kgs) 750 Dimensions Lxlxh (mm) 1900x1100x1540 NOise Level dB(A)1m 86.2
EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg
A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible.
x-travel: 550 mm y-travel: 400 mm z-travel: 400 mm Control: INGERSOLL ANDRONIC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
model: T500, brand: Idromec, Construction year: 2004, operating hours: approx. 11000, Shear force: 500 tons, Box length: 6 meters, Pretensioning device: No, Oil cooling: Yes, Automatic cycle: Yes, Remote control: Yes, Protective plate for slider: No, control cabin: Yes, State: as seen, not outdated, mass: approx. 58 tons, Installation: not included
Used INTAMSYS FUNMAT PRO 410 â high-performance 3D printer for engineering plastics, Industrial quality at an attractive used price, For sale is a used INTAMSYS FUNMAT PRO 410, an industrial high-temperature 3D printer for additive manufacturing with sophisticated technical materials such as PEEK, ULTEMâ¢, PPSU, PC, PA, ABS and many more., The printer is fully functional, has been regularly serviced, and is in very good condition. Ideal for use in the Aerospace, automotive, medical technology, research and development,, ---------------------------------------------------------------, Highlights of the FUNMAT PRO 410:, - Dual extrusion system: Two nozzles for complex geometries, support materials and multi-material printing., - High temperature pressure: Nozzle temperature up to 500°C â perfect for high-performance thermoplastics., - Large installation space: 305 à 305 ...
IMA Double side label bundling machine made 2017 Used industrial equipment, lasting heavy duty equipment - rarely available. Upgrade recommendation: Sheet-fed rotary die-cutting machine „Heidelberg SORD-DC Available from Germany: immediately
Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
Used head machine / dough divider KÖNIG, Type: Rex Industrie II - I-Rex 8 / 6 / 5 rows - Own integrated control system for individual operation - Weight range: up to 110 g Visits and test runs are possible by arrangement.
Key data: 1300 mm, 4 , 70 mm
IMEAS Wide Belt - Calibration and Grinding Machine Model Combi 4.4/130 Refurbished in 2020 PLATE CALIBRATION LINE According to the attached pictures. 1- Plate feeding system 1- "IMEAS" COMBI 4.4/130, with electrical control panel 1- System for unloading the plates 1- Dust extraction system, consisting of fan, socket filter and duct network Electrical cable duct for power supply Machining width 1300mm Calibration.- Abrasive belt width 1350mm Min. thickness 10mm max. thickness 70mm Final tolerance +- 0.075mm Opening height 120mm Working height 1400mm Feed speed 30m/min. Sanding belt speed 26m/sec. Compressed air 7 bar Space requirement approx. 21.5 x 5m Errors, changes and prior sale reserved
Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4
Manufacturer: OspreyFrank Model: iSteam iS18 Type: Dry Steam Cleaner Vapor pressure: 8 bar Steam temperature: approx. 180 °C Power: 3500 W Voltage: 230 V Condition: used
Control Mazatrol 640 MT Pro Max. Rotary Diameter 660 mm Max. turning length 1,045 mm Travel X1 axis: 580 mm X2 axis: 150 mm Y-axis: 160 mm Z1 axle: 1,045 mm Z2 axis: 1,010 mm W-axis: 1,050 mm B-axis: -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 22 kW Max. spindle speed 4,600 rpm C-axis Sub-spindle Drive power: 18.5 kW Max. spindle speed 5,000 rpm C-axis Milling spindle Drive power: 18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 40 tool positions Max. tool diameter: 90/125 mm Max. tool length: 300 mm Max. tool weight: 10 kg lower turret Drum turret 9 tool stations Special equipment Conveyor Tooleye 15 bar high pressure pump Milling spindle synchronized threading 5-axis simultaneous machining Preparation for multiple and flash tool holders Interface for ...
USED VERTICAL MIXER, 24 m3 capacity, total height approx 5.400 mm including transmission group + cyclon, max Ø 2.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter,, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, electric voltage: 400 V, 50 Hz,, conditions: good working conditions, availability: immediate, width: 2800 mm. special transport
Machine name: Packaging machine used (thermoforming line) Manufacturer: Adolf Illig Type: SB 53C - DIN Year of Make: 1990 Drive motor: 1.24 kW Dimensions: L 1,600 x W 1,135 x H 2,710 mm Curb weight: 500 kg Tech. Documentation: Yes Remark: Heating capacity: 4.5 kW (15 ceramic surface emitters) Vacuum system: Degree of vacuum max. 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Drawing depth positive: 150 mm Drawing depth negative: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (Skin) Film roll core diameter: 70 mm Condition: Used Price: On request
ISVE COMBI 80/80S-GR700, including loading and extraction belts, sturdy supporting structure, TWIN SHAFT SHREDDER with, loading hopper, shredding chamber 800 x 800 mm., dust and liquid proof bearing cases, n.2 shafts on upper part, n.42 rotating knives with staggered hooks, n.2 planetary gearboxes, n.2 x 11 kw Siemens drives, automatic inversion on overcharge, GRANULATOR type C 40-70, soundproof cased, rotor wiudth 700 mm, rotor diam.400 mm, screen 40 mm, V-belt transmission, 22 kw drive, Electric cabinet wit S7-1200 Siemens PLC and touch screen display, Users manual, CE, electrical drawings, installed power - used power in work: about 60-65% : 44 kW, availability: immediate, working width: 800 mm., conditions: fully reconditioned, type: SHREDDER + GRANULATOR - 40 mm screen
Used head machine GULLIVER, type: IRIS 20 Special R -In very good condition / new parts- Dough-friendly, automatically operating dough dividing machine for the production of rustic rolls and breads in various shapes and Sizes. Square, triangular, diamonds, trapezoids and also ciabatta. - extra long inlay belt, for more dough - 2 new Mehler - Incl. 4 cutting rollers - Portioning and shaping of the dough by, easily and quickly replaceable, knife rollers - Best choice for processing doughs with high dough yield - This means that there is sufficient dough volume after freezing or interrupting proofing - Very space-saving due to foldable straps - Frame in stainless steel - Stepless adjustment of the speed - Display can be swivelled incl. several programs - Machine cleaned - Very good technical condition - Ready for immediate use Technical data: -El. Connection: 380 V, 5 ...
Technical data: Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used Features: • Manufactured by Windmöller & Hölscher (W&H) • Designed for inline use with bag-making equipment • 3 chambers with doctor blades for precise ink transfer • Compact, robust construction for easy integration • Ideal for retrofitting or adding inline print capability
used
Hindenlang TPESM-600 - Induction oven Max temperature: 850° Capacity: 500 kg Voltage: 400 V
used
Hindenlang TPESM-600 - Induction oven Max temperature: 850° Capacity: 500 kg Voltage: 400 V
Hindenlang TPESM-600 - Induction oven Max temperature: 850° Capacity: 500 kg Voltage: 400 V
Hindenlang TPESM-600 - Induction oven Max temperature: 850° Capacity: 500 kg Voltage: 400 V
WASHING LINE for PLASTIC SCRAPS, for 350-550 kg/h average capacity depending on contamination and material, material loading screw conveyor with hopper, equipped with vibrating motor, made of stainless steel, stainless steel tank size 5,0 x 1,5 x 2,0 mt. complete with 2 horizontal skimming screw conveyors for material handling. 8.2 kW, 50 Hz., horizontal screw conveyor at the bottom + diagonal screw conveyor for extracting sunk material, stainless steel safeti grate on the upper part, diagonal material collection drainage screw conveyor, drying centrifuge, material extraction fan, electrical panel, the line was built in 2008 and is offered completely reconditioned
Inv. Num. : 8688 Type: Beyeler PR 150 IPC Producer: Bystronic Created: 2004 Parameters: Compressive force: 150 t Maximum bending length: 3100 mm Stroke: 215 mm Machine weight: 10000 kg Machine condition: out of order
UNDERWATER PELLETIZER, up to 1.400 kg/h with soft and rigid PP max 30 MFI, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger holder unit with blade pressure adjustme ...
UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...
Transnorm curved belt conveyor right bend 45°-800-700 IR1600 RA2435 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 1600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 1600 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adju ...
Offer 25311 Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 /min - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Footswitch - Space requirement approx. W 1300 x H 1250 x D 1300 mm - Weight approx. 800 kg - Mobile undercarriage
Tie bar expansion nut, adjustment nuts and split nuts for die casting machines from IDRA, Frech/Müller Weingarten, OP Die Casting Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Condition New The mother is new and fully functional. The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar expansion nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
An Alfa Naval disc stack centrifuge module for separating foreign oil from water-based coolants is available. Speed: 7500rpm, throughput with water-based coolant: approx. 480l/h, max. medium temperature: 70°C. Machine dimensions X/Y/Z: approx. 650mm/550mm/1200mm, weight: approx. 60kg. An on-site inspection is possible.
HEAVY DUTY SINGLE SHAFT SHREDDER - multipurpose, Main applications:TYRES - CABLES - WEEE - LIGHT METAL SCRAPS - OIL FILTERS, and other industrial waste, Rotor length: 1,200 mm, Rotor diameter: approx. 500 mm, rotor speed 144 rpm, Cutting chamber opening: 600 x 1.200 mm, 30 rotating blades, 16 fixed blades, Installed power: 1 x 132 Kw IE3 (belt drive), Siemens (PLC and control equipment), Schneider Electric (protections, switches and power supply), Omron (sensors and auxiliary modules), Power supply voltage: 3~ 400 V – 50 Hz, screen holes bespoke to project, Robust structure with interchangeable internal armour plating in wear-resistant steel., High-inertia rotor designed to minimise wear and optimise cutting power., Blades can be resharpened several times, Quick blade and grid replacement system with easy access., Hydraulically opening grid cradle for easy maintenance and grid replacem ...
Key data: 637 KW, 1500 1/min
Natural gas operation Engine block incl. crankshaft, camshaft, pistons, connecting rods, wheel drive, vibration damper, turbocharger console
maximum number of results exceeded
please refine your search
