hydro turbine used for sale

Graham Z3271 Steam tunnel Stainless frame and stainless mesh belt 3000mm x 380mm belt Variable speed With Hydromatik steam generator

cutting diameter: 330 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 610 mm : 330 mm : 330 mm Capacity 90° rectangular: 610x 310 mm : 320 mm : 320 x 320 mm capacity 45 degrees: flat: 460 x 180 mm speed: 20 - 100 m/min total power requirement: 2,69 kW weight of the machine ca.: 773 t dimensions of the machine ca.: 2,1 x 0,85 x 1,3 m Our semi automatic horizontal bandsaw machine is suitable to cut full materials as pipe, steel cating, steel etc. By turning the vice jaws 0-45 degree cut can be processed. On semi automatic models, after finishing the cut, sawframe is lifted hydraulically up to the adjusted level. After finishing the cut, sawframe is lifted hydraulically up to the adjusted level. Metal sawblade and material roller table are supplied as standart. Standard Features: Blade Brash Coolant Pump Control Panel Hydromechnic Blade Tension Inverter Heavy Duty Gearbox Height Adju ...

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

spindle diameter: 160 mm x-travel: 10.000 mm y-travel: 3.000 mm Control: total power requirement: 120/63 spindel kW weight of the machine ca.: 63 t dimensions of the machine ca.: 15x3.85x7.36 m Stocknumber 1210057 Type of machine CNC Floortype boring machine Make WOTAN Type Rapid 5C Build in 2004 Type of control HEIDENHAIN iTNC 530 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.800 Z-stroke (mm) 700 W-stroke 700 mm Tool Taper Iso 50 Speeds (Rpm) 1,25 - 1250 Feeds (mm/R) 1 - 5000 mm/min Rapid feeds 5 mtr/min. Total Power (KW) 120 /spindel 83 Lenght (mm) 14.500 Width (mm) 3.850 Height (mm) 7.360 Weight 62.300 kg Additional information completely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530 - 4 different angular milling heads - hydrostatic spindle bearing - aerostatic guideways - coolant device - chip conveyo ...

Beer Separator GEA Westfalia GSE capacity 200 hl /h - 2017 This centrifuge has been designed for beer filtration and clarification of beverages. It was manufactured in year 2017 and it has hydraulic capacity 0-200 hl/h. The self-cleaning, disc stack type bowl makes the machine suitable for fully automatic cleaning - in - place (CIP). The bowl is driven by frequency controlled 22 kW AC electric motor which is connected to the bowl with a power belt. Opening and closing of the bowl for discharging the solids takes place hydraulically using water. The product feed and discharge are in a closed system. The product feed and discharges in the bowl are hydrohermetically sealed and do not feature mechanical seals. All product-contacting parts are made of stainless steel; the gaskets conform to the requirements of food operations. The delivery includes separator, valve panel, control panel wi ...

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

Boiler tank made of iron by INDUSTRIAS IBAIONDO. Air charge pressure: 0 bar Maximum temperature: 40 ºC General characteristics: Maker INDUSTRY IBAIONDO Guy Conventional hydropneumatic accumulator Material Iron

Boiler tank made of iron. General characteristics: Guy Conventional hydropneumatic accumulator Material Iron

Turning diameter cross slide/bed: 170mm/400mm, turning length: 550mm, spindle bore: 42mm, bar length: 3200mm. Tool turret: 12-position turret, control: TX8F, loading magazine: LNS Hydrobar, spindle hours: 30707. Including chip conveyor, tailstock (not in use). Available from May, 2024.

Length: 8225mm, width: 3200mm, with documentation.

cutting diameter: 440 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 640 mm : 440 x 440 mm Capacity 90° rectangular: 640 x 440 mm capacity 45 degrees: round: 440 mm : 400 x 400 mm Capacity 45° rectangular: 400 x 440 mm : 440 mm : 440 x 440 mm : 510 x 440 mm capacity 60 degrees: round: 250 mm capacity 60 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 250 x 440 mm table height: 850 mm cutting speed: 20 - 100 m/min dimensions of saw-blade: 3,1 x 1,2 x 1,91 m total power requirement: 4,67 kW weight of the machine ca.: 1,78 t dimensions of the machine ca.: 2,85 x 1,3 x 1,8 m Product Description Capacity of the machine is 440/640 and projected for fast cuttings straight or with angle . Sensetivity of the machine lets cutting with percentage angles. BMSY 440CDGH has automatic control system and open to future developments. Rollers on the table are designed for easy movement o ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: FANUC O-M Operating hours: 55887 Technical data 2 columns execution Table length: 1320 mm Table width: 860 mm Longitudinal travel (X-axis): 1200 mm Transversal travel (y axis): 600 mm Travel of the vertical slide: 635 mm Passage from grinding motor to table: 750 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Passage between the columns: 950 mm Max. angle with taper grinding: up to: 16 ° Planetary motion speeds: c axis stepless from: 5 rpm up to: 300 rpm Possible grinding-spindle speeds: stepless from: 9000 rpm up to: 80000 rpm With air-turbine max.: 160000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 8.5 kVA Machine´s weight about: 6300 kg Overall dimensions machine: Length: 3000 mm Width: 2500 mm Height: 2870 mm Various accessories: CN ...

With documentation and software.

Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 2 columns execution Table: Table length: 1020 mm Table width: 860 mm T-channel width: 14 mm Number of spline: 7 Distance of the T-slots: 100 mm Table load max.: 800 kg Longitudinal travel (X-axis): 900 mm Transversal travel (y-axis): 600 mm Verticla travel (W-axis): 635 mm Feeds: X axis: 5 - 2500 mm/min Y axis: 5 - 2500 mm/min W axis: 800 mm/min Passage from grinding motor to table: 750 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Passage between the columns: 950 mm Max. angle with taper grinding: up to: 16 ° up to grinding depth: 44 mm Vertical travel of grinding spindle: up to: 180 mm Travel speeds: stepless from: 0.015 m/min up to: 7.5 m/min Stroke length Z, infinitely adjustable: 125 mm Radiale fine feed U-axis up to: 6 mm Planetary moti ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16i-M Operating hours: 16841 Technical data Table: Table length: 1440 mm Table width: 860 mm Table load max.: 800 kg Carriage: Longitudinal travel (X-axis): 1300 mm Transversal travel (y axis): 800 mm Vertical travel (z axis): 635 mm Passage from grinding motor to table: 0 - 750 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Passage between the columns: 970 mm Max. angle with taper grinding: up to: 16 ° Stroke speed Z-Axis: Alternating stroke mouvement, infinitely adjust. from Vmin.: 0.500 mm/min up to Vmax.: 14000 mm/min Stroke frequency Z: 5 Hz Stroke length Z, infinitely adjustable: 170 mm Radiale fine feed U-axis up to: 5.5 mm Planetary motion speeds: c axis stepless from: 5 rpm up to: 300 rpm Possible grinding-spindle speeds ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: CNC 311 Technical data Table length: 770 mm Table width: 630 mm Table load max.: 500 kg Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 450 mm Verticla travel (W-axis): 500 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Stroke of spindle-nose: 125 mm Max. angle with taper grinding: up to: 16 ° up to grinding depth: 44 mm Alternating stroke mouvement, infinitely adjust. from Vmin.: 0.5 mm/min up to Vmax.: 12000 mm/min Stroke frequency Z: 4 Hz Radiale fine feed U-axis up to: 5.5 mm Planetary motion speeds: c axis stepless from: 5 rpm up to: 250 rpm Possible grinding-spindle speeds: stepless from: 4500 rpm up to: 80000 rpm With air-turbine max.: 160000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 5600 kg Overall dim ...

Code: 0536 Brand: OMS SALVARANI Model: OK 330 - CE Standard Automatic double crosscutting machine for wood, PVC, aluminium, plastic materials - CE standard Technical data: Min/Max cutting length mm 350/3000 Blade diameter mm 330 F20 Rpm 3000 Hydropneumatic blade lowering Manual blade movement by handwheel Cutting capacity at 90° mm 140 x 88 Cutting capacity at 45° mm 98 x 88 No. 2 motors each Hp 2,8 Intermediate support for large workpieces Compressed air 6-8 bar Overall dimensions: mm 3200 x 800 x 1200 h Weight kg 640

Year: 2021 (brand new machine, immediately available) - stable cast iron construction - hydro-pneumatic controls - adjustable position of the heads - lowered thrust unit (30 mm hoof) - profile supports - scissors stroke: 10.5 mm - working stroke of the clamp: 80 mm - crimping height: 120 mm - crimping point: 30-60 mm

Complete bottling and capping line for hydroalcoholic solution (B105) Composed of: - Rotary vacuum filling machine (18 filling heads). Manufacturer: MECANIZADOS ESPADA. Model: TR 18V. Year: 1999. - Crimping machine. Manufacturer: MECÁNICA ROPAL. Model: G R V 105. Year: 2007. - KEYMAX capping machine (1). Model: EM007-07. Year: 2010. - KEYMAX capping machine (2). Model: EM0006-07. Year: 2010. - Automatic bottom labelling machine. Manufacturer: RUSAN. Year: 2005. Further information on request.

cutting diameter: 360 mm saw band length: 4800 mm cutting width: 510 mm : 360 x 360 mm Capacity 90° rectangular: 510 x 360 mm : 360 mm : 360 x 360 mm Capacity 45° rectangular: 390 x 360 mm : 360 mm : 360 x 360 mm : 510 x 360 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 200 x 360 mm speed: 20 -100 stufenlos m/min main drive: 3,4 kW dimensions of saw-band: 4800 x 34 x 1,1 mm weight of the machine ca.: 1,45 t dimensions of the machine ca.: 2,65 x 1,2 x 1,87 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellentprice-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (no ...

Technical data Bar diameter round up: 3 mm up to: 20 mm possible with equipement Length of bars max.: 3270 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 5270 mm Width: 1000 mm Height: 1300 mm

Technical data Table length: 590 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Travel of the vertical slide: 500 mm Passage from grinding motor to table: 480 mm Distance from spindle-center to vertical slide: 310 mm Max. grinding diameter: 180 mm with display-plate: 220 mm Max. angle with taper grinding: up to: 12.0 ° Vertical travel of grinding spindle: stepless from: 3 mm up to: 110 mm Travel speeds: stepless up to: 6.0 m/min Planetary motion speeds: c axis stepless from: 5 rpm up to: 330 rpm Possible grinding-spindle speeds: stepless from: 9000 rpm up to: 80000 rpm With air-turbine max.: 100000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 HP Machine´s weight about: 2800 kg Overall dimensions machine: Length: 1400 mm Width: 1600 mm Height: 2700 mm Various accessories: Tool cabinet Centering device Frequency convertor static ...

Technical data Table length: 1000 mm Table width: 300 mm Grinding length: 700 mm Grinding width: 320 mm Max. distance from table to spindle-centreline: 550 mm Longitudinal travel (X-axis): 850 mm Transversal travel (y axis): 350 mm Automatic cross-feed: from: 0 mm up to: 20 mm Automatic vertical feed: from: 0.01 mm up to: 0.30 mm Diameter of grinding wheel: 400 mm Width of the grinding wheel: 75 mm Wheel int. diameter: 127 mm Grinding wheel speeds: from: 1400 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 12 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2200 mm Width: 1700 mm Height: 1800 mm Various accessories: Hydrostatic guiding Coolant system Magnetic plate: Length: 600 mm Width: 310 mm Wheel truieng attachment hydraulic Grinding wheel with flange Splash guard

Sheet thickness: 100,00 mm Bending length: 3000 mm Number of rolls: 4   Make Haeusler 100 mm Type VRM HY Year 1994 Heavy Duty 4 roll plate benderS heet thickness (mm)T = 100 mm Bending length (mm)Pre = 80 mm Number of rolls L = 3.000 mm Top roll = 780 mm        Side roll = 750 mm     Hydro 2 roll power 165 kW CNC Controlled Double side support Top support Conical bending attachment Weight 125 ton  

Spindle diameter: 0 mm Longitudinal X: 18500 mm Vertical Y: 4500 mm Cross Z: 950 mm Positions ATC: 60   Table length: 20000 mm Table width: 4200 mm Number of tables: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 Hydrostatic guideways Hydrostatic spindle bearing   Pick place head change station 1 = Facing head with  U-Axis 2 = Universal milling head 3 = Boring Spindel support 4 = Vertical milling head X – Travel:              18.500mm Y – Travel:              4.500mm Z – Travel:              950mm W – Travel:              900mm Table Length:            20.000mm Table Width:             4.200mm Table load:          ...

Specifications 1.3.1 Dimensions, space requirements, weight, energy requirements Dimensions, weight Machine incl. control cabinet Length x Width (depth) x Height (incl. Levelling elements): approx. 3,600 mm x approx. 2,400 mm x approx. 2,500 mm Minimum height requirement: 3,500 mm Net weight: approx. 8,500 kg Pay attention to the set-up plan! It contains all connection data, space conditions, etc. necessary for energy supply and installation. 1.3.2 Spray-suppression cabin, full-space cover of the machine View into the machine interior: safety window (window composite) Design: polycarbonate lens protected on both sides Cover of mounting or maintenance openings: Sliding door(s) hinged and/or removable body parts Cover of the operators side, loading and unloading opening: sliding door, loading hatch Activity: - Foldable body parts,sliding doors of assembly and maintenance openings: manual - ...

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51000 € : 933.3 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4770 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MO ...

I sell the moulding heads for the automatic fourside moulder WACO Weinig Gruppe. Inside diameter 50mm Outside diameter (with knives) 170mm Body diameter 155mm 15 pcs. working length 200mm (without knives). 8 pcs. working length150mm (with knives) Each with Hydro holding. Price per pc. 500 euros. Sellable per pc. or totally together. Available immediately.

5.5m CNC VTL w/ Two turning heads The machine is New, available due to a postponed order. Technical Characteristics CNC equipment Siemens 840Di Work piece diameter: 5.500 mm Bludhcom Max. height: 3.200 mm Work piece weight: 60 to Table diameter: 4.500 mm Table speed: 0.2 - 30 rpm Power of main drive: 100 kW Hydrostatic bearing for the table Cross rail vertical travel: 2.600 mm Ram vertical travel: 1.800 mm Ram horizontal travel: 3.150 mm Ram cross section: 300 mm x 300 mm

Hydro-pneumatic aluminum circular saw Fabr. EMMEGI Type SCA 400 PMachine -No: 176667 Year 1997Technical specifications:Saw blade diameter: 400 mmSaw blade speed: 2800 rpm.Swivel range up to: 15 ° left / + 15 ° rightWith- Underframe- pneum. Workpiece clampingvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Press brake Ultima 4100 mm Pressing force 320 tons Control ESA 650 Windows with workstation software 4-axis backgauge CNC-controlled 1 backgauge X3 CNC controlled 2 additional stop fingers 2 heavy-duty mounting arms adjustable in height and width to linear guide + parking space Machine table special design 2 pneumatic sheet metal supports with brushes Hydraulic clamping for Wila Matritzen incl. hydro unit Hydraulic clamping for Wila upper tools incl. hydro unit Raised frame stroke 400 mm Installation height 730 mm D-STM Automatic sheet thickness measurement-20mm incl. correction database B9mn0pxrvh Oil Cooler

Key data: 40 , 600

3 x Enogia 40MT ORC Model: 40MT ORC Year: 2017 Hours: 150 Capacity: 40 kW each Heat source: Hot water Voltage: 600 V General Information: Good. Each ORC has only produced circa 6000 kwh. Service history: They have recently (3/2/22) had a diagnosis report by Enogia and found to be in good order. Electrical cabinet is in good condition. The launch of the two turbines simultaneously was a success, the 6000 rpm set point was reached without fault, both in manual and automatic mode. Available for Sale. Price: €60,000 each

2-sided planing machine with slot bed: Year of construction 1993 Working width 170 mm Working height 120 mm Working height 4-sided 120 mm Number of spindles 4 Spindle arrangement u-o-u-o Diameter of the spindles 50 mm Spindle speed 6000 rpm Engine power 30-22-11-11 kW Feed speed 12-120 m/min Driven rollers in table 6 Automatic table lubrication Table height constant 840 Diameter of the suction nozzles 4x160 mm Weight 4500 kg Space requirement 4000x1700x1400 mm Voltage / Frequency 400V 50Hz 3Ph.

x-travel: 6600 mm y-travel: 3200 mm z-travel: 1000 mm w-axis: 1750 mm Control: Siemens 840 D column daylight: 2650 mm distance spindle nose and table: 2500 mm table surface area: 6400 x 2250 mm table load: 50 t tool taper: ISO 60 spindle turning speed range: 5 - 2000 U/min table feed: 10 - 15000 mm/min feeds crossrail-slide horizontal: 10 - 10000 mm/min feed: (W) 10 - 2000 mm/min spindle motor: 55 kW total power requirement: 85 kW weight of the machine ca.: 125 t dimensions of the machine ca.: 18 x 9,5 x 6,5 m Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90 deg. indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - cool ...

saw blade diameter: 380 mm cutting diameter: 120 mm capacity 90 degrees: square: 90 x 90 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 80 x 80 mm turning speeds: 2.800 U/min voltage: 400 V compressed air: 7,0 bar total power requirement: 3,0 kW weight: 220 kg Current new price, with accessories ~ 12.000 euros Furnishing : - Versatile use for aluminum and plastic profiles - Swivel range 0°-45° stepless to the left and right - Detents at 15°, 30° and 45° - Stable, polished, continuous support table - with precisely mounted rotary table - Wear-free and quiet multiple V-belt drive - saw blade - Hydropneumatic saw feed - 2-hand operation - Machine with stand - Pneumatic profile clamping device (2x horizontal, 1x vertical) Special accessories included: - 1x ELUMATEC feed roller conveyor - 1x ELUMATEC discharge roller conveyor, with stop & magnifying glass The data ...

FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...

ReiCat 600 Catalyzer suitable for roasters from 30 kg up to 60 kg per batch. Environment friendly and cost-efficient technology that neutralises smokes and odour plumes. With the ReiCat Catalyst the micro particles, odours, smoke, plumes and hydrocarbons are converted into harmless substances such as water vapour (H2O) and carbon dioxide (CO2) by using a combination of techniques. This one was manufactured in 2019 and used less than one year in 2020. The price includes shipping to Europe and a 6 month warranty. Don't hesitate to check the seller profile to see other roasting equipment offers

Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg

The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...

WESTFALIA SAMM 12006 CREAM SEPARATOR FOR MILK & WHEY CAPACITY: 12.000 LT/H COMES WITH A SPARE HYDROULIC CLUTCH

Nominal effort: 630 tons Course stroke: 420 mm Number of strokes in a minute: 20 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Slider dimensions 1000x1000 mm Table size: 1250x1250 mm Dimensions of the hole in the table 800x800mm Thickness of the sub-stamp plate 180 mm Height above floor level 600 mm Main motor power: 56 kW hydropneumatic pillow in the table Press overall dimensions: -Length: 3280 mm -Width: 3470 mm -Height: 6190 mm Press weight: 52650 kg

KARATS DH-30 CNC Deep Hole Borer Manufactured year 2017 Main specification ● Height from Bed sliding to center of Chuck 2,900 mm ● Swing over bed 5,800 mm ● Drilling capacity 56~650 mm dia ● Distance between center 25,500 mm ● Max. working length 24,000 mm ● Max. workpiece load capacity (with 2 Steady rest ) 380 tons ● Max. workpiece clamping dia 3,400 mm Bed ● Total length of Bed 53,850 mm ● Width of Bed 2,500 mm ● Height of Bed 700 mm Headstock ● Spindle shaft dia 800 mm ● Spindle rotating speed 160 rpm ● Chuck size 2,500 mm ● The clamping dia on Chuck 600 ~1,600 mm ( Design 480~1,680 mm ) Boring head ( A-axis) ● The feed for working 14,000 mm ● Max. feeding 25,870 mm ● Min. distance from Chuck 21,300 mm ● Max.. distance from Chuck 47,170 mm ● Rapid feeding speed 4,000 mm/min  ...

The combined cycle plant consists of a gas turbine, waste heat recovery boiler, steamturbine and a generator, mounted in a single shaft configuration. The capacity of the installation is 53 MW • The prime mover of the installation is an aero derivative General Electric LM6000-PB-DLE. 40 MW - 30,000 hours remaining till next major overhaul - Running hours 74.100 hours , start 3356 - Next overhaul in 5000 hours(hot gas path) - Next major overhaul: in 30.000 hours • The Steam Turbine is a SIEMENS ENK40/53-3, with a capacity of 13 MWe. Dismantled, stored and ready for transport.

Mobile 4-gloves Isolator for sterility testing. PLC: SIEMENS S7-300 Simatic. Machine incl. hydrogen peroxide vapour generator for room/zone decontamination BIOQELL L-3, built in 2013. Classification of usable space: Class 100 Classification acc. to GMP: Class C Filter: HEPA Filter Class H14.

Machine Details Warehouse number 1105-03707 Machine type CNC lathe Make MYANO Type JNC 45 S Year of construction 1994 Control type CNC Control FANUC OT Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock, freely loaded Technical details Turning diameter 45 mm Turning length 300 mm Control FANUC OT Speed 4000 1/min Rapid traverse 20 m/min Total power requirement 30 kW Machine weight approx. 5 t Information CNC lathe with sup spindle and live tools X1=105mm, Z1= 380mm, 11/15KW MAIN SPINDLE 5.5 KW COUNTER SPINDLE 1 X REVOLVER WITH driven tool positions, rod loader lns hydrobar, rod length up to 3000mm Conveyor PARTS FAENGER All prices plus law. VAT.. Changes and errors in the technical details and information excepted.

Year: 2018 - technically efficient, ready to work – after full service - engine power: 1.1 kW - hydro-pneumatic cutter feed - two pairs of short stroke clamps - to the movable post