hydro turbine used for sale

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

CNC carousel lathe with tool changer.You Ji GTH-35/45 ATC-I. Built 2012.Fanuc 0i-TD CNC Control.Planchime diameter 3,500 mm.Hydrostatic table - Max load 50 t.swing diameter max. 4,500 mm.Turning diameter max. 4,000 mm.turning height max. 2,200 mm.Stoesselplanweg X -1.750/+2.160 mm.Stoesselsenkrechtweg Z 1.500 mm.Table drive 60/75 kW.Speed 2 x 75 mm.Torque at the table 67,330 Nm.Tool magazine with 16 places.Tool holder 7/24 BT 60.Place requirement 12,375 x 8,210 mm.Machine height 7,920 mm.Full cladding.3-colors Signal lamp.NEW - 200 operating hours ! Immediately available;; As good as new

HIDROS LDK.070X-1C Brand:HIDROS Type:LDK.070X-1C Stock number:M21-4478 Cooling capacity:64 kW Number of fans:2 Refrigerant:R407C Refrigerant Content:19 kg Voltage:400 Volts Power consumption:42,8 A Dimensions:2650 x 1150 x 1800 mm Weight:930 kg Year:2010 Number in stock:2 piece(s) Price: Quotation request Description: Good air-cooled Hidros water chiller with 2 scroll compressors on 1 circuit. This chiller is equipped with a hydro kit (water pump + expansion vessel) and a Dixell 1PG 100D controller. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Free Cooling: Q= 43kW, P= 1.4kW at Tw= +15°C / Tambiant = +2°C and 20% Glycol). Visit also our website: used-refrigeration

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

Hydraulic unit 250 l, 4 kW, max. 45 bar More: Hydro-aggregator FORTUNA Sperry Vickers, 200 l tank, with various valves pump: G-PA3-25-EK1-20R (see picture)

Hydraulic unit 360 l, 2 x 11 kW, 2 memory More: Hydro-aggregate REXROTH DB 250-04-0, 1 memory, various valves Hydro-aggregator REXROTH, 60 l tank, various valves (see pictures)

Gas turbine with generator model M1A-13D 2,500 hours after overhaul 50 Hz, 400 V, in excellent condition, extrated and ready for transport.

Centrifugal deposition Hydro Zyclone Liquid Particle Separator Hydro Cyclean HC5/HCH5 used Hydrocyclone Gravity-Water-Particle Separator Cyclone Water filter Water cleaner Watercleaner For separating heavier, larger particles in liquids or sludges. Was used to separate particles from washed-up pappier & cardboard solids. Price per pc3 3 x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB5B.40 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11837 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11836 (EQ.Nr 11GE01/1st stage) 1x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB6B.48 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE02/2nd stage) Cyclone & Distribution Material: Plastic Frame & Pipe Material: Stainless Steel Size Total approx.: 6200 x 1100 x 2800 mm Weight each approx.: 2.5 to T ...

Technical Details: Plasmastromqülle Messer Griesheim, Plasmette cutting range for steel to 40 mm capacity at 80% ED - 120 A cutting medium, argon, hydrogen, nitrogen cooling fan + water cooling unit voltage at 230 volts = 54 amps power at 400 volts = 31 A Input voltage 25 KVA Machine weight about 0.3 tonnes of space is about 1.2 x 1.0 x 1.2 m. The plasma cutting torch used to cut all [...Technical data truncated]; Operational

Furnacce 1200 hardness tester 300x300x500 mm Temperature max 1200C Ölbrenneranlagen Retortenöfen Teil Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen Tunnelofen Haubenofen Schachtofen Sonderanlagen Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmaschinen Drehherdöfen Doppelkammeröfen buerstlein Draht Glühöfen Durchlauföfen zirlguss Elevatoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herd ...

A 208 liter barrel with gear oil is offered. Manufacturer Totoal Type: Dynatrans MPV (old name Transmission WB) Applications: For lubrication of mechanical gearboxes, converters, hydrostatic transmissions, hydraulic systems, power steering, Oil bath clutches and oil bath brakes. Can be used in gearboxes when a gear oil according to API GL-4 is required in SAE class 10W-30 or 80W. Can be used in hydraulic systems when an HVLPD oil (DIN 51524-3) is required in ISO VG 68. characteristics International Specifications: API GL-4 Shares: Massey Ferguson CMS M 1145, M 1143 Volvo CE WB 101 John Deere: JDM J20C ZF TE-ML 03E/ 03L/ 05F/ 06P/ 17E/ 21F TotalEnergies recommends the use of: McCormick HTX Valtra G2-08 Ford M2C 134D and FNHA 2C 201.0 Case MS 1206/ 1207/ 1209 CNH MAT 3505/ 3509/ 3525/ 3526/ 3540 New Holland NH 410B / NH 410C Massey Ferguson CSM M 1135/ M1141  ...

The nominal gain kN 4000 Slide stroke, mm 400 Frequency Slider strokes min-1, 25 The frequency of single strokes, min-1 19 Slider travel to its lowest position, where the press develops the rated force, mm 8 The distance between table and slider in its lower position at the upper adjustment position, mm 470 Size of adjustment of distance between table and slider, mm 160 The size of the table, mm 1000x1000 The size of the slide from front to back, mm 800 Width of windows in racks mm 600 Main electric motor power, kW 37.0 Air flow, m3 / stroke 0,017 Press overall dimensions, mm left to right 3470 front to back 3140 Height above floor level, mm 5940 Weight without hydro pillow kg 32600

Capacity, ton 630 Ram stroke, mm 300 Ram adjustment, mm 220 Number of strokes per minute 15 Table dimensions, mm 1100 x 1500 Slider dimensions, mm 1000 x 1250 Distance between table and slider in its lower and upper adjustment position, mm 650 Ram ejector stroke, mm 100 Capacity of hydro cushion, ton 55 Stroke of hydro cushion, mm 150 Main motor power, kW 55 Press weight, kg 63000

CARRIER 30 RA 040 Brand: CARRIER Type: 30 RA 040 Stock number: M21-4526 Cooling capacity: 39.3 kW Application: Cooling Number of fans: 1 Refrigerant: R407C Refrigerant Content: 10 kg Voltage: 400 Volts Power consumption: 30 A Dimensions: 2100 x 1100 x 1400 mm Weight: 526 kg Year: 1999 Number in stock: 1 piece(s) Price: Quote request Description: Nice air-cooled Carrier chiller with 1 scroll compressor on 1 circuit. This machine is equipped with coated fins, a Pro Dialog Plus controller and a hydromodule (water pump and expansion vessel). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration

Capacity: 250 ton Slider stroke: 400 mm Number of strokes per minute: 25 Table dimensions: 2500x1250 mm Slider dimensions: 2500x1250 mm Distance adjustment between table and slider: 250 mm Distance between table and slider in its lower and upper adjustment position: 800 mm Clamping plate thickness: 100 mm Hydro-cushion: -Force: 46 ton -Stroke: 160 mm Weight: 70 ton

BLUE BOX Epsilon Echos HP 37/ST 1PS Brand:BLUE BOX Type:Epsilon Echos HP 37/ST 1PS Stock number:M21-4507 Cooling capacity:35.6 kW Application:Cooling/Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:9 kg Voltage:400 Volts Power consumption:13 kW Dimensions:1350 x 550 x 2100 mm Weight:460 kg Year:2016 Number in stock:1 piece(s) Price:On request Description: Nice air-cooled Bleu Box chiller/heat pump with 1 Copeland ZP154 scroll compressor on 1 circuit. This machine is equipped with a Carel micro C² SE controller and a hydronic module (water pump, expansion vessel and 140 liter buffer tank). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating capacity: Q= 38.1kW, P= 11.9kW at +40/45°C and +7°C dry bulb, +6°C wet bulb). Please visit also our website: used-refrigeration

Double crankshaft mechanical press RAVNE DE 315 2 crankshaft, closed type, simple action press DE 315 Manufactured by Zelezarna Ravne, Yugoslavia Press is in excellent working condition, has moving table and hydro cushion YOM 1990 Description Capacity 315 tons Slider stroke 400mm Number of strokes per minute 18 Table dimensions 2500 x 1400 mm Slider dimensions 2500 x 1400 mm Distance adjustment between table and slider 250mm Distance between table and slider in its lower and upper adjustment position 700mm Force of hydro cushion 8 tons Stroke of hydro cushion 155 mm Weight 75 tons

Combination of suction Sweeper and wet scrubbing machine with 4 cyl. Kubota diesel engine, infinitely variable hydrostatic travel drive, automatic functions. Max working width 1270 mm, high emptying. Solid technology from a brand manufacturer, ideal for indoor and outdoor areas! 2 x available: Year 2006 / 220 h and year 2005 / 1020 h More Sweepers on stock - information, photos and special offers on request!

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

10.500 volts A.C generator was driven by a Solar centaur 50 gas turbine in good running condition with 5000 KVA from 1992 for sale. A.C alternator is stored in our warehouse Bergisch Gladbach. generator end: A.C Generators typ: LSA 56.L84P voltage: 10.500 powwerrating: 5000 KVA rpm: 1500 r/min manufactured: 1992 weight: 13.6 tons price: 40.000€ FCA Price: 40.000€ FCA free loaded in our warehouse D-Bergisch Gladbach. Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

GEA GLAC 0152 AC1.SL Brand:GEA Type:GLAC 0152 AC1.SL Stock number:M21-4513 Cooling capacity:34 kW Number of fans:4 Refrigerant:R407C Refrigerant Content:6 + 6 kg Voltage:400 Volts Power consumption:15 kW Dimensions:2000 x 1150 x 1990 mm Weight:850 kg Year:2006 Number in stock:1 piece(s) Price:On request Description: Nice air-cooled Gea chiller with 2 Copeland scroll compressors distributed over 2 circuits. This chiller is equipped with speed-controlled fans, a CVM2 controller and a hydronic module (water pump, expansion vessel and 250 liter buffer tank). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration

Power Plant 19 MW Titan 130 + boiler + steam turbine 16.000 hours since new in 2005 in excellent condition, as new. For immediate sale.

ELHA 6 Axis Horizontal Machining Center Xpert-K High-Performance Horizontal Machining Center The newly designed DEPO XPERT K horizontal machining centre offers a high degree of flexibility and above-average productivity. Description Horizontal BAZ The 6 axes are individually controllable. The HSK 100 holder makes it possible to clamp large tools and thus process large areas with high chip removal. Installed is a high-performance G30 fork head spindle with hydromechanical clamping system and a hybrid slewing bearing at top speed which allows extremely high speeds to be driven in order to achieve an optimal milling result even with the smallest tools. This fork head is equipped with a fully automated spindle change cycle, which makes it possible to replace the complete spindle in less than an hour. A hydraulic clamping device is installed for clamping components (effective table ...

Belimed WD290 washing and disinfection machine List price: € 52,616.00 net per system WD290 Washing and disinfection machine for machine instrument preparation Automatic washroom door made of double-walled safety laminated glass only in two-door design Applications: Surgical instruments Minimally invasive instruments Conatiner Surgical shoes Laboratory equipment Specifications Features / Components WD 290 Heat emission freestanding 1000 (+/- 200) W Weight with side panel 384 Kg Noise value with side paneling 62 dB(A) Door opens automatically from top to bottom with safety shutdown switch list Material: Frame cladding chrome nickel steel 1.4301, AISI = 304 Material: Washing chamber and door chrome nickel steel 1.4404, AISI 316L Wall thickness wash chamber 1.5 mm Washing pump nominal pump pump capacity 900 l / min Washing pump pump pump operating power op ...

DRO- ELESTA x-travel 650 mm y-travel 450 mm z-travel 140 mm w-travel (head) 500 mm feed range 0 - 1500 mm/min table surface area 770 x 630 mm spindle speed 4.500- 80.000 rpm spindle speed with turbine 100.000- 160.000 rpm Perfect condition. Just start up and test run, about 200 hours.

The OE750 spark spectrometer and the new OE720 are metal analyzers with new, groundbreaking performance features. With them, you can analyze all elements found in metals at low detection limits and with state-of-the-art multi-CMOS technology. Ever stricter requirements, complex supply chains and the increasing use of scrap as a base material are forcing foundries and the metalworking industry to reliably detect the lowest ppm values of traces and accompanying elements. Until now, spark spectrometers in these power ranges have been unwrive for many. With the OE series, this has now changed fundamentally. Hitachi OE spark spectrometers analyze all essential alloying elements and extremely low levels of trace, accompanying and treatment elements in metals, e.B nitrogen in steel. The OE750 also covers rare applications such as oxygen in copper and oxygen, nitrogen and hydrogen in titan ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 1 column execution Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y axis): 200 mm Travel of the vertical slide: 250 mm Passage from grinding motor to table: 270 mm Max. grinding diameter: 15 mm Vertical travel of grinding spindle: stepless from: 2 mm up to: 32 mm Travel speeds: steps: 2 from: 4.0 m/min up to: 5.0 m/min Possible grinding-spindle speeds: stepless up to: 120000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 750 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1600 mm Various accessories: Rotary table diameter: 300 mm Set of clamping tools Air turbine

Hydropneumatic functioning Punching power: 50 kN Height: 140 mm

Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition,  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16 Operating hours: 5859 Technical data Distance between centres: 610 mm Swing over cross-slide: 300 mm Swing over bed: 450 mm Max. turning diameter: 525 mm Spindle hole: 52 mm Turning diameter: 210 mm Turning length: 525 mm Carriage: Longitudinal travel (Z-axis): 560 mm Transversal strocke (X axis): 135 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 6 Inner cone diameter: 32 mm Indexing time: 0.7 sec Taper in spindle:: JIS A2-5" Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Taper in tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 12000 mm/min Spindle motor: 11  ...

TECHNICAL DATA: Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 2,000 watts Max sheet thickness structural steel: 20 mm Max sheet thickness stainless steel: 12 mm Max sheet thickness Aluminium: 8 mm STANDARD EQUIPMENT: â?¢ Closed machine frame with integrated laser unit â?¢ TRUMPF laser TLF 2000 â?¢ Laser unit: CO2 laser, high-frequency excited, cooling unit, logbook function â?¢ Automatic pallet changer and laengsfoerder tape â?¢ Drives: maintenance-free three-phase servo motors â?¢ Laser power control â?¢ HI-LAS high-pressure cutting â?¢ Plasma sensors PMS â?¢ Fast processing with SprintLas â?¢ ContourLas for the production of small loechers â?¢ Cutting gas pressure adjustment programmable â?¢ La ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 76500 Technical data Number of spindles: 2 Number of revolvers: 2 Swing over bed: 240 mm Spindle hole: 65 / 42 mm Turning diameter: 200 mm Bar diameter: 65 / 42 mm Clamping chuck diameter: 200 mm Turret carriage: Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Transversal travel (y-axis): +/-40 mm Carriage:: 2 Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Turret carriage: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 40-4000 rpm Main spindle: C axis (spindle,resolution): 0.025 ° Spindle speeds: stepless from: 25 rpm up to: 5000 rpm Torque max.: 200 Nm Back spi ...

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

Technical details Cutting width= .40 - .000mm Machine weight approx.: 640 kg Room requirements LxWxH approx.: 1800 x 1350 x 1920mm The machine was little needed, very good condition Extract from the manufacturer Infosheet: Technical data > For single to medium series productionâ Maximum cutting depth: 40mm The machine is in a very well maintained and very good condition and can be visited at any time under electricity by appointment. Subject to changes and errors in the technical details and information provided. Round cuts from 40 to 1000mm - size II Round cuts from 40 to 1500mm - size III The machines P 2000 II and P 2000 III are stand machines in a stable steel construction. They cut cleanly, dimensionally, with a straight cutting edge all cutting-edgeable materials: such as rubber, felt, cardboard, plastics, fibres, graphite with and without inserts, et ...

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 18i-TB Operating hours: 9976 Technical data Number of axis total: 5 Swing over bed: 620 mm Turning diameter: 380 mm Bar passage: 52 mm Turning length: 540 mm Longitudinal travel (Z-axis): 600 mm Longitudinal travel (X-axis): 217 mm Transversal travel (y-axis): 101.6 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 12 Spindle speeds: 4000 rpm Power of driven tools: 5.5 kW Spindle nose: Inner cone diameter: 40 mm Taper in spindle: Camlock: A2-6" Collet bore: 52 mm Spindle speeds: stepless up to: 4500 rpm Back spindle:: A2-5" max. speed: 6000 rpm Spindle diameter: 45 mm Power of back spindle: 11/15 kW Rapid traverse:: 30 m/min Time under power: 13221 Hour Working time: 8781 Hour Voltage 50 Hz 3x: 400 ...

The Prima Power Platino 1530HS laser was produced in 2006 by the Italian company Prima Industrie S.p.A. The 4 kW laser is equipped with a Primach 20L CNC control. The machine is used for cutting metal sheets with a thickness of 20 mm (black steel), 12 mm (stainless steel) and 8 mm (aluminum). The laser has an independent F axis with programmable focus position and nozzle distance. The maximum feeds in the X / Y / Z / F axes are respectively: 3050 mm, 1525 mm, 150 mm and 25 mm. The machine is equipped with: a Prima Power Convergent Lasers Division CX 3000 resonator with a power range from 200 to 3000 W and a cooling unit. In addition, the price of the laser also includes 3 cylinder regulators made of chrome-plated brass with a stainless steel diaphragm in the first stage of reduction and a bellows structure in the second stage of reduction, and 2 cylinder regulators for oxygen and nitroge ...

Danfoss OMR 160 new, Danfoss OMS 125 used, Danfoss OMV 315 used, Danfoss OMV 400 as new

horizontal conveyor belt with hydromotor

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Technical data 1 column execution Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Travel of the vertical slide: 250 mm Passage from grinding motor to table: 270 mm Max. grinding diameter: 15 mm Vertical travel of grinding spindle: stepless from: 2 mm up to: 32 mm Travel speeds: steps: 2 from: 4.0 m/min up to: 5.0 m/min Possible grinding-spindle speeds: stepless up to: 120000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 750 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1600 mm Various accessories: Rotary table diameter: 300 mm Set of clamping tools Air turbine

Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 yom: 2010 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Key data: 2000 , 9470

Turning diameter: 2000 mm Turning length: 9470 mm Turret positions: 0 Make: Ravensburg Type: KVH3 - 1000 CNC YOP: 2005 Max. turning Ø:2.000mm X-Axis:        780mm Z-Axis:        9.470mm Spindle bore:  150mm Speedrange:    600Rpm Spindle power: 80kW ATC / revolver:4 Length:        17.000 mm  Width:         6.500 mm  Height:        3.200 mm  Weight:        67.000 kg  Work load 15 t (20t) Hydrostatic guideways support Chuck 1300 mm Siemens 840 power line X/Z/C Axis C Axis 360.000 direct driven Sauter 4 position tool system CAPTO C6 2 x Steady rest 500 + 750 mm Milling attachment Sk40 / 1500 RPm / 4,5 kW

Work Envelope (WxDxH) (mm): 1600x500 Work Handling Method: Grit Sand   Other Info: 4 blasting turbines - Make : Rösler Germany - Typ : RRB 16/5 - Serial : WO 1576 - YOP : 2008 - Max. width : 1.600 - Max. height : 500 - Minimum product length : 2.300 - Minimum thickness : 6 - Workpiece weight Kg : 1.250 - Working speed M/min : 0,5–3 - In feeding height : 800 - 4 blasting turbines - Power 11 kW - Speed 100 M/sec - Roller conveyor feeding in - Roller conveyor feeding out - Filtration System ROSER RF 75/9 P/w Capacity 7500M³ - Under power up to 03.2020 - Incl. double brushes for cleaning - Return to sender for grit sand  

Graham Steam tunnel Model: Z3271 2010, Stainless frame and stainless mesh belt, 3000mm x 380mm belt, variable speed, with Hydromatik steam generator, 3Ph

2 nos. GE PG9171E 180MW / 50 Hz gas fired combine cycle gas turbine power plant, year 2004, around 31,000 hr - 34,300 hr, Steam turbine is 60MW each , and complete with heat recovery boiler. Welcome enquiry for buying only 1 or 2 gas turbine or includes engineering works.

The JAFO FYN 50 ND CNC milling machine was produced by Jarocińska Fabryka Obrabiarek S.A. in 2007. The machine is equipped with the working table of dimensions (W x L) 500 x 1400 mm and CNC control HEIDENHAIN. The numerical control allows to work in an automatic cycle with a circular or linear interpolation in three-dimensional space. Machine feeds in the X/Y/Z axes are 800 mm, 500 mm and 500 mm respectively. The CNC milling machine weighs 4500 kg. A fourth axis can be connected to the machine control panel. Technical specification of the JAFO FYN 50 ND machine - CNC control: HEIDENHAIN - working table surface (W x L): 500 x 1400 mm - feed rates in the X/Y/Z axis: 800/500/500 mm - stepless feed rate adjustment - spindle nose: ISO 50 - stepless regulation of spindle rotation speed - metering lubrication system - guide rails lined with TURCITE B” material - hydromechanical q ...

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...