hydro turbine used for sale

Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.

High-efficiency dynamic classifier (separator) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel equipped with 64 blades, outer ring equipped with 36 manually adjustable counter-blades, incl. drive. In very good condition.

Hydrostatic pressure transmitter with metallic measuring cell Manufacturer: Vega Grißhaber KG Type: D36G 0.2 EXB Continuous level measurement by means of a hydrostatic Pressure transmitter with metallic measuring cell in compact design with Threaded connection, flexible cable extension as well as one in the sensor housing built-in two-wire electronics with analog signal transmission 4 ... 20 mA/HART suitable for a separate evaluation device e.g. type VEGAMET 381 Ex. Scope The pressure transducer is a pressure transmitter for pressure and level measurements of liquids and viscous fillers with higher temperatures in the chemical, food and pharmaceutical industries. The pressure transducer offers the possibility to detect even the smallest measuring ranges from 0.1 bar. Your benefits - Highest measurement reliability even at rapidly changing process temperatures - High ...

Various spare parts for SOMOS dryers e.g.: gear wheels, electrical parts, desiccant Chambers, filter elements, blowers, heating elements, motros, sight glasses, turbines, magnetic valves or cylinders can be offered on demand.

Technical details: Plasma current source Messer Griesheim, Plasmette cutting range for steel up to 40 mm power at 80% ED - 120 A cutting medium Argon, Hydrogen, nitrogen cooling with fan + water cooling unit voltage at 230 volts = 54 A current voltage at 400 volts = 31 A input voltage 25 KVA machine weight approx. 0.3 t room requirement approx. 1.2 x 1.0 x 1.2 m The plasma cutting torch is used for cutting all electrically conductive metals, cutting power 8 or 8 13 KW, with cutting stroems 70 or 120 A. As plasma-forming gases argon, hydrogen and nitrogen are used. The use of nitrogen prevents beard formation and nitration in steel in some materials. Argon and nitrogen can be used to cut dull sheets and cut stainless steel and aluminium.; ready for use.

P12 - used appr. 30 m³ / 30,000 litres PE-tank, plastic tank / flat bottom tank, double-walled, former chemical tank, in good condition. capacity: 30 m³ / 30,000 litres diameter inside: appr. 3.00 m outer dimensions: appr. 3.48 m x 4.80 m overall height Double-walled, (i.e. with an outer hull), non-translucid, various connections such as ventilation, inlet, outlet, etc., lid on top of the roof. For transportation the different attachments, level indicator, probes, pipes, etc. will be dismantled and are supplied along with tank. Former hydrochloric acid 31% tank Chemical tank for hydrochloric acid, sulphuric acid, methylated, ironIIIchlorid, formic acid, hydrogen peroxide, acetic acid, etc. The tank's size makes it perfect for placement inside a shed or barn, as a storage tank for water, waste water, sewage, seeping juice, manure, AHL/ASL etc. High-quality plastic t ...

APV Liquiverter TB-250-01. yom.1993, excellent condition. Batchcapacity 250 litres. with double wall for heating or cooling during mixing. The Flex-Mix™ Liquiverter is specially designed for products with low to medium viscosity in order to obtain a fast mixing of powders and particles with liquids. The Flex-Mix™ Liquiverter is usable for mixing, dispersion, recombination and reestablishment of soluble products. It is also used for reconstitution of dairy products, manufacturing of fine foods, emulsions, preparation of starch and hydrocolloid solutions

P18 - used appr. 30 m³ / 30,000 litres PE-tank, plastic tank / flat bottom tank, double-walled, former chemical tank, in good condition. capacity: 30 m³ / 30,000 litres diameter inside: appr. 3.00 m outer dimensions: appr. 3.48 m x 4.80 m overall height Double-walled, (i.e. with an outer hull), non-translucid, various connections such as ventilation, inlet, outlet, etc., lid on top of the roof. For transportation the different attachments, level indicator, probes, pipes, etc. will be dismantled and are supplied along with tank. Former hydrochloric acid 35% tank Chemical tank for hydrochloric acid, sulphuric acid, methylated, ironIIIchlorid, formic acid, hydrogen peroxide, acetic acid, etc. The tank's size makes it perfect for placement inside a shed or barn, as a storage tank for water, waste water, sewage, seeping juice, manure, AHL/ASL etc. High-quality plastic t ...

Make: Omes Type: Tramatic 370S Year of construction: 1988 Saw blade diameter: 350 mm Features of this machine are: -mechanical pneumatic Vice -hydropneumatic feed can be adjusted (see Control Panel) -Saw process and open the Vice manually or automatically -After reaching the depth of saw the saw head will return automatically to its basic position Saw capacity - 90 ° degree cut -Diameter of 130 mm -100 x 100 mm rectangular tube -Fermentation cuts adjustable - right-hand and left-hand fermentation, if necessary in a voltage Machine has been little used

Round table with C-axis FKD 60, 6000, faceplate diameter capacity 200 to, speeds 60 with manual gearbox ZF, Masterslafeverspannung, 4 spindle motor Siemens 40 kW, speed 1 level 0-10 RPM, 420000 nm 2nd stage 0-60 speed rpm, 115000 NM, circulating oil lubrication system, hydrostatic storage, dimensions: length: 6900 mm, width: 6000 mm, height: 1200 mm, weight 80 t.

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

1 DETTIN hydroextractor for cones type BERTA 24 hydraulic type

Compact tractor with selectable four-wheel drive, infinitely variable hydrostatic travel drive, Diffentialsperre, 3-cyl.-Kubota diesel engine, 15 kw/20 HP EZ 5/95, only about 350 hours of operation, cabin, heating, power steering, turf tyres, Front hitch, front PTO, 2 x hydraulic connections front. Rear three point linkage, rear PTO 540/1,000 rpm. Complete with vehicle and good battery! Needs service, otherwise good machine. Price ex. export € 7.900 / / in Germany plus 19% VAT price € 9.401,- Equipment optional at extra charge available, E.g. snow blade, broom, centrifugal spreader roller spreader. We supply used winter maintenance technology - Holzhäcksler - engines and more - see photos!

Qty. 1 Second-hand JCO pipe welding line Mfc.: Korean Company Installation date: 11 - 2008 Production types: KS, JIS, ASTM, API, Material: API 5L. 2B.X-80under mild steel Product capacity: 70,000 ton/year Product size O.D.: 406 – 1676 mm - 16”~66” Length: 5~16 m Wal Thickness: 9~80 mm Voltage supply: 440 V or 380 V, 220 V, 60 Hz Manufacturing process: Plate stacking Edge Milling Pre Bending Press Forming Tack Welding Welding Calibration Machining Pipe Ends Hydro Static Test NDT (RT & UT)

- Hobelbreite 20 - 320 mm - Hobelhöhe 8 - 230 mm - stufenloser Vorschub 5 - 25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - untere Welle min. /max. Werkzeug FI 110 / 145 mm - rechte Welle min. /max. Werkzeug FI 110 / 200 mm - linke Welle min. /max. Werkzeug FI 110 / 200 mm - obere Welle min. /max. Werkzeug FI 110 / 200 mm - 2. untere Welle min./max. Werkzeug FI 110 / 200 mm Spindelanordnung: 1. unten 11,0 kW 2. rechte vertikal 7,5 kW 3. linke vertikal 7,5 kW 4. oben 11,0 kW 5. unten 11,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung 1,1 kW - Gesamtanschluss 54,6 kW - Satz Vorschubwalzen FI 180 x 40 x 110 mm - angetriebene Walzen im Tisch - Aufgabetischlänge 2000 mm - Druckluftanschluss 8 bar - Spannung 400 V / 50 Hz - Abmessungen L=4191, B=2144, H=2000 mm - Gewicht 6500 kg inklusive: - obere Welle elektrisch verstellbar mit Vorschubsystem und digitaler PLC Anzeige - hart v ...

One used 7730 KVA GEC Alsthom 11KV AC generator( generator end ) for sale. The alternator is in a very good running condition. He was driven by a Siemens Tornado gas turbine. The location is our warehouse in solingen, germany. generator end: GEC Alsthom typ: CG710G2000U voltage: 11.000V powerrating: 7730 KVA rpm: 1500 r/min manufactured: 1991 weight: 19,5 T price on request

- Hobelbreite 20 - 330 mm - Hobelhöhe 8 - 230 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - untere Welle min. /max. Werkzeug FI 110 / 145 mm - rechte Welle min. /max. Werkzeug FI 110 / 200 mm - linke Welle min. /max. Werkzeug FI 110 / 200 mm - obere Welle min. /max. Werkzeug FI 110 / 200 mm - 2. obere Welle min./max. Werkzeug FI 110 / 200 mm - untere Welle min. /max. Werkzeug FI 110 / 200 mm - 6 Spindeln 1. unten 11,0 kW 2. rechte vertikal 7,5 kW 3. linke vertikal 7,5 kW 4. oben 11,0 kW 5. oben 11,0 kW 6. unten 11,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 67,6 kW - Satz Vorschubwalzen FI 180 x 40 x 110 mm - 5 Stück angetriebene Walzen im Tisch - Aufgabetischlänge 2000 mm, gehärtete Ausführung - Druckluftanschluss 8 bar - Absaugstutzen 2 x 150 mm, 4 x 180 mm - Spannung 400 V / 50 Hz - Abmessungen L=4854, B=2144, ...

Two used 8110 KVA Syncronous A.C. 11KV generators( generator end ) for sale. The alternators is in a very good running condition.It was driven by a Siemens Tornado gas turbine. The location is our warehouse in solingen, germany. generator end: Synchronous A.C. Alstom Type: CGS710N2240U voltage: 11.000V electrical power: 8110 KVA rpm: 1500 rpm Year of construction: 1999 Weight: 17t Price on request Here you can download the generator pictures (4 MB): abc.stromerzeuger-discount.de/Alstom-Generatoren/P140796-10.zip

- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. Werkzeug FI 160 /230 mm - linke Welle min. / max. Werkzeug FI 160 /230 mm - obere Welle min. / max. Werkzeug FI 160 /230 mm - 2. obere Welle min. / max. Werkzeug FI 160 /230 mm - untere Welle min. / max. Werkzeug FI 160 /230 mm -max. Sägeblattdurchmesser 2. obere Welle 300 mm Motorleistung: 1. unten 15,0 kW 2. rechte 11,0 kW 3. linke 11,0 kW 4. oben 15,0 kW 5. oben 15,0 kW 6. unten 15,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 94,5 kW - Jointer obere Wellen und unter Welle - horizontale Wellen mit Gegenlager / Hydrospannung - obere Welle elektrisch verstellbar mit Vorschubsystem mit Digitaler Anzeige - linke Welle elektrisch verstellb ...

One used 2650 KVA AEG 5250V alternator ( generator end ) for sale. The alternator is in a good running condition. He was driven by a AEG Kanis G20 back pressure steam turbine. The location is our warehouse in solingen, germany. Brand: AEG Type: DKBH 4565/04 voltage: 5250V Electrical power: 2650 KVA RPM: 1500 rpm Year of construction: 1983 Weight: 8 tons Price on request: Here you can download the alternator pictures: (6 MB) abc.stromerzeuger-discount.de/Generator_2650KVA_5250_Volt_AEG/Generato r_DKBH_4565-04_AEG_2650_KVA_AEG_5250_Volt.zip Call us : 0163/5263546

New 161 i with automatic gas console year construction year 2015 installation and commissioning on request data see PDF HiFocus 160i 400V ArH2N2/O2 up to 15m with plasma torch connection unit Oxygen; Nitrogen; Argon; Hydrogen; Air oxygen; Nitrogen; Forming gas 5; Air plasma machine burner PerCut 170-2 with vortex gas ; immediately available

Sale of parts and assemblies ex large area mower Shibaura CM 364: Diesel engine 25 kw / hydrostatic transmission / axles / electric / cabin / wheels and more. no mower-deck.

Heavy Hochleistungshobelmaschione type Waco 6,000 with 8 spindles. Feed speed 75 m/min up to 600 m / min. Spindles: U/O/RE/LI/U/O/O/U Working height: 17 mm to 120 mm. Max-width 50 mm up to 350 mm. All spindles with Jointer. Machine with feeder table (accelerator) and cross conveyor. Complete switchgear including FU's. Including soundproof cabin! RONDAMAT and washing machine for planing heads. 1 set of tools.

Technische Daten: - Hobelbreite 30 - 260 mm - Hobelhöhe 10 - 200 mm - min. Werkstücklänge 840 mm (einzeln) / 280 mm (bei Serie) - 6 Spindeln - Spindel FI 50 mm - Drehzahl 6500 U/min - Vorschubgeschwindigkeit stufenlos 8 - 36 m/min - Abrichtwelle, unten max. Werkzeug FI 125 - 140 mm - Rechte Vertikalwelle max. Werkzeug FI 118 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 118 - 200 mm - obere Horizontalwelle max. Werkzeug FI 118 - 200 mm - zweite obere Horizontalwelle max. Werkzeug FI 118 - 200 mm - untere Horizontalwelle max. Werkzeug FI 118 - 250 mm Spindelfolge: 1. unten 7,5 kW 2. rechte vertikal 11,0 kW 3. linke vertikal 11,0 kW 4. oben 11,0 kW 5. zweite obere 11,0 kW 6. untere 11,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung Vorschub 0,75 kW - Motor Höhenverstellung obere Welle 0,75 kW - Motor Breitenverstellung linke Welle 0,18 kW - Gesamtleistung 71,68 kW - Drucklu ...

Grass collecting container GAH 3060/2 fits Kubota front mower F3060 / F3560. Without turbine!

Sweeper and scrubber Tennant 8210 diesel 100 Combination of suction Sweeper and wet scrubbing machine with Kubota diesel engine, High emptying, infinitely variable hydrostatic travel drive, automatic functions. 2 x available, paid hours approx. 220 and about 1020. More information, photos and offer on request!

Technische Daten: - Hobelbreite 50 - 330 mm - Hobelhöhe 8 - 250 mm - min. Werkstücklänge 700 mm (einzeln) / 300 (bei Serie) - stufenloser Vorschub 8-36 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - untere horizontale Welle min. /max. Werkzeug FI 140 mm - rechte vertikale Welle min. /max. Werkzeug FI 140 / 230 mm - linke vertikale Welle min. /max. Werkzeug FI 140 / 230 mm - obere horizontale Welle min. /max. Werkzeug FI 140 / 230 mm - 2. obere horizontale Welle min./max. Werkzeug FI 140 / 230 mm - untere horizontale Welle min. /max. Werkzeug FI 140 / 230 mm - 6 Spindeln 1. unten 11,0 kW 2. rechte vertikal 11,0 kW 3. linke vertikal 11,0 kW 4. oben 15,0 kW 5. oben 11,0 kW 6. unten 11,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung Vorschub 1,5 kW - Motor Höhenverstellung obere Welle 0,75 kW - Motor Breitenverstellung linke Welle 0,37 kW - Gesamtanschluss 84 kW - Vorschub ...

Technische Daten: - Hobelbreite 20 - 260 mm - Hobelhöhe 8 - 180 mm - 5 Spindeln - Spindel FI 50 mm - Drehzahl 6000 U/min - Vorschubgeschwindigkeit stufenlos 6 - 30 m/min - untere Horizontalwelle max. Werkzeug FI 110 - 145 mm - Rechte Vertikalwelle max. Werkzeug FI 125 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 125 - 200 mm - obere Horizontalwelle max. Werkzeug FI 110 - 200 mm - 2. untere Horizontalwelle max. Werkzeug FI 110 - 200 mm Spindelfolge: 1. unten 7,5 kW 2. rechte vertikal 7,5 kW 3. linke vertikal 7,5 kW 4. oben 11,0 kW 5. untern 11,0 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 1,1 kW - Gesamtleistung 43,6 kW - Druckluftanschluss max. 6 bar - Absaugstutzen 5 x 150 mm - Abmessungen L=4280, B=1700, H=1700 mm - Gewicht 4600 kg INKLUSIVE: - Horizontalspindeln mit Gegenlager (Hydrospannung) - hart verchromte Tische - CE Norm, TÜV Rheinland - pneumatischer Seitendruc ...

Various new spare parts for Rösler blasting system Turbine Hurricane H42 H32 H28 Litter scoop Rösler H42 H32 H28 Impeller Rösler H42 H32 H28 Guide sleeve Rösler H42 H32 H28

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Technische Daten: - Hobelbreite 20 - 260 mm - Hobelhöhe 8 - 180 mm - 6 Spindeln - Spindel FI 50 mm - Drehzahl 6000 U/min - Vorschubgeschwindigkeit stufenlos 6 - 30 m/min - untere Horizontalwelle max. Werkzeug FI 110 - 145 mm - Rechte Vertikalwelle max. Werkzeug FI 125 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 125 - 200 mm - obere Horizontalwelle max. Werkzeug FI 110 - 200 mm - 2. obere Horizontalwelle max. Werkzeug FI 110 - 200 mm - 2. untere Horizontalwelle max. Werkzeug FI 110 - 200 mm Spindelfolge: 1. unten horizontal 7,5 kW 2. rechte vertikal 7,5 kW 3. linke vertikal 7,5 kW 4. oben horizontal 11,0 kW 5. oben horizontal 11,0 kW 6. unten horizontal 11,0 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 1,1 kW - Gesamtleistung 62,1 kW - Druckluftanschluss max. 6 bar - Absaugstutzen 6 x 150 mm - Abmessungen L=4710, B=1700, H=1700 mm - Gewicht 5000 kg INKLUSIVE: - Horizonta ...

Technische Daten: - Arbeitslänge 3000 mm - Arbeitsbreite 1250 mm - Material Dicke 25 - 90 mm - Anzahl der Etagen 12 - Anzahl der Einspanneinheiten pro Fach 8 - Luftanschluss 8 bar, 1/2 \" - Motorleistung Drehvorrichtung 0,55 kW - Druck pro Einspanneinheit 1 - 12 kN - Max. Belastung pro Fach 150 kg - Pneumatik Camozzi - Elektrik Telemecanique - Getriebemotor Watt - Einspanneinheiten sind gezinkt - Schutzgitter - Hydraulik Aggregat - Pumpendurchfluss: 6,3 l - Leistung Hydromotor 3,0 kW - Hydrauliktank 50 l - max. Druck Hydraulikmotor 110 bar -Transport dimensions:   3800 x 2400 x 2200 mm ,1400 kg   4400 x 1600 x 2000 mm , 950 kg   1600 x 1600 x 800 mm , 900 kg   1600 x 1600 x 800 mm , 900 kg - Aufstellmasse L x B x H 4400 x 4600 x 3700 mm - Gewicht 4300 kg Option: Andruckelemente für dünnene Platten (15-25 mm) EUR 44,-/Stk Ausrichten mit 4 Pneumatischezylindern EUR 600,- Beschreibun ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Technische Daten: - Arbeitslänge 3000 mm - Arbeitsbreite 1250 mm - Material Dicke 25 - 90 mm - Anzahl der Etagen 16 - Anzahl der Einspanneinheiten pro Fach 8 - Luftanschluss 8 bar, 1/2 \" - Motorleistung Drehvorrichtung 0,55 kW - Druck pro Einspanneinheit 1 - 12 kN - Max. Belastung pro Fach 150 kg - Pneumatik Camozzi - Elektrik Telemecanique - Getriebemotor Watt - Einspanneinheiten sind gezinkt - Schutzgitter - Hydraulik Aggregat - Pumpendurchfluss: 6,3 l - Leistung Hydromotor 3,0 kW - Hydrauliktank 50 l - max. Druck Hydraulikmotor 110 bar -Transport dimensions:  3800 x 2400 x 2200 mm ,1400 kg  4400 x 1600 x 2000 mm , 950 kg  1600 x 1600 x 800 mm , 900 kg  1600 x 1600 x 800 mm , 900 kg - Aufstellmasse L x B x H 4400 x 5000 x 3700 mm - Gewicht 4500 kg Option: Andruckelemente für dünnene Platten (15-25 mm) EUR 44,-/Stk Ausrichten mit 4 Pneumatischezylindern EUR 600,- Beschreibung: D ...

Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

- Arbeitslänge 2500 mm - Arbeitsbreite 1200 mm - Verleimdicke 20 - 60 mm - Anzahl der Ebene 3 - manuel Drehen - die Pressung ist mit dem einseitigen hydraulische Zylinder ausgeführt - Anzahl der Zylinder pro Ebene 5 - die Druckzylinder sind fest - Zylindertyp FI 50 x 150 mm - Spezifische Druck 6 kg/cm2 - Anzahl der Niederhaltern pro Ebene 2 - jede Niederhalter hat einen pneumatischen Zylinder - Typ der pneumatische Zylinder FI 50 x 100 mm - jede Niederhalter hat eigene Luftventil für Ein/Aus - Druckregulation mit Regulator - Hydraulische Aggregat - Pumpendurchfluss 6,3 l - Leistung der Hydromotor 2 kW - max. Druck für der Hydromotor 30 - 150 bar - Parkplatz für die Niederhalter

Technische Daten: - Arbeitslänge 3500 mm - linker Kopf fest - hydropneumatischer Sägevorschub - Drehung der Köpfe rechts und links - Schwenkung der Köpfe 90C bis 45C - dadurch auch für Schifterschnitte geeignet - Positionierung nach Skala mit Spannvorrichtung - Blaspistole - 2 HM-Sägeblätter 400 x 30 mm - Motor: 1,5 kW - Spannung: 230/400V, 3~, 50Hz - FI Sägeblatt: 400 x 30 mm - Drehzahl Sägeblatt: 3800 U/min - min. Schnittlänge: 565mm - max. Schnittlänge: 3300mm - Luftanschluss: 6-8 bar - Abmessungen LBH: 4150x1200x1650 mm - Gewicht: 450 kg

Make SKODA type SUA 125 PA built 1992 place of storage from location country of origin Czech Republic delivery time immediately freight base from location Technical details: turning diameter over bed 1500 mm Turning diameter over support 1100 mm turning length 13000 mm Control SIEMENS 820 T plan disc speed range 0.9 - 315 r pmWork unit weight between tips max. 14000 kg Main drive DC 42 kW Total power requirement 65 kW Machine weight approx. t space requirement approx. m Additional information - CNC control SIEMENS 820 T - increased turning diameter 1500 mm - positioning of the flat disc via M-function or manually in typing mode with digital display - other accessories: + belt grinding device + 2 bezels max. 630mm and 4.8t load capacity + 2 roller blocks max. 950 mm and 7t load-bearing capacity - Hydrostatic main spindle bearing

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

Used parts ex ISEKI TG 5390 AHL. 28 kw/40 hp turbo diesel, hydrostat drive 3-stage, 4-wheel drive, front power lifter, cabin, lawn tyres. Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes per 1 min: 20 Single slide strokes per 1 min: 16 Shut height: 1060 mm Slide adjustment: 320 mm Table dimensions: 3150x1800 mm Slide dim., front-back: 1700 mm Window H 1500 x W 1900 mm Hydro pneumatic cushion in table clamping force at P = 0.42 MPa (P = 4.2 kg / cm2), kN 2000 ejection force P = 0.45 MPa (P = 4.5 kg / cm2), kN 200 Main-drive electric motor power: 132 kW DIMENSIONS: 5150x4700x11400 H floor7830 mm WEIGHT:193 ton

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

Pneumatic conveying system for various types of powder, consisting of: feed hopper with lid and compressed air turbine vibrator (netter NCT 10), injector (Telschig 2' FOX 300-SCE-SS) and side channel compressor (Electric Sd 820, 7.5 kW, 9.0 m3/h, 420 mbar) with pressure limiting valve. Flow capacity: 375 kg/h, required conveying air: approx. 180 Nm3/h at 330 mbar.

construction height: 2.800 mm height of stroke: 3.800 mm lifting forece: 4.000 KG equipment: - cabinet - safety cover - Rexroth hydrostatic drive - lenghtwise-cross-cirrcle- and diagonal drive - all around lighting and reversing alarm - XXL broad cabinet - door for cabinet - heating for cabinet

Pneumatic conveying installation for different kinds of powders, consisting of: Feeding hopper with cover and turbine vibrator (Netter NCT 10), injector (Telschig 2'' FOX 300-SCE-SS) and side channel blower (Elektror Sd 820, 7,5 kW, 9,0 m³/h, 420 mbar) with pressure limiting valve. Conveying capacity: 375 kg/h, required air flow: Ca. 180 Nm³/h at 330 mbar.

16 stations, max. 12 mm , reel, ring straightener, Knoll scratch tape foerderer, various hoistand and spare parts