hydro turbine used for sale

hydraulic drilling and milling machine Rotary table included Manufacture Details: - Manufacturer: Société Genevoise d´Instruments de Physique (SGIP) - Model: Hydroptic (with reference to a sub-component "Rotoptic-6") - Serial Number: Specific series number mentioned for traceability and maintenance Table Specifications: - Length: 1100 mm - Width: 842 mm - Max T-Nut Length: Noted as 800 mm with spacing details on the machine table - Max Load Capacity: 800 kg Machine and Operation Specs: - Spindle Type: Morse No. 4 taper with both internal and external fitments per DIN 2202 standards - Spindle Speeds: Ranges from 40 rpm to 2000 rpm across 18 settings - Table Motion: Hand-adjustable hydraulic shift and rapid traverse capability up to 1100 mm - Vertical Clearance: Max clearance of 2385 mm - Feed Rates: Adjustable between 25 to 300 mm/min - Total Weight: Approximate gross weight wit ...

Sand Drainage Manufacturer: CDE Type: Hydrocyclone Year of Make: 2021 Operating hours 428 h Drive: Electric Location: NRW Price from location:

Manufacturer: Langzauner, Type: FPS Hydromatik, Control: yes, Longitudinal cutting guillotine: yes, Cutting lenght mm: 3100, Schnittbreite min-max mm: 600, Working hight mm: 50, Required space L x W x H mm: 3900x1170x1500, Wight approx. kg: 3200,

engine: 220/380/420 V ampere: 4.75/2.75 A motor speeds:: 1420 U/min. engine output: 1,1 kW weight: 100 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pump type: QX 31-020/21-016/21-012 R, power: 5.5kW, flow rate: 29l+23l+18l/min, max. pressure: 3x40bar, oil viscosity: 32-46cSt, usable volume: 300l. On-site inspection is possible.

Cutter Duker Rex Hydro 65 Made of stainless steel Distribution cabinet made of special steel, inside the machine Control box integrated in machine housing Noise-canceling cover Bowl capacity: 65 liters Electric power: 15kW Voltage: 380V / 50Hz 3 N/PE

spindle diameter: 135 mm x-travel: 1000 mm distance between columns: mm y-travel: 700 mm bore capacity in steel: 60 mm spindle stroke: 300 mm spindle turning speed range: 40-2000 U/min table-size: 1100x842 mm cross rail - adjustment: 770 Vertikalweg mm spindle drive: 6 kW total power requirement: kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m with: - 2 axes digital display Newall - Rotoptic table - Swivelling rotary table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible.

A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible.

WEINIG moulder, type Hydromat 22B, Machine specifications:, Planing width 220 mm, Planing height 120 mm, Feed speed 6 – 60 m/min, Motor power hydraulic feeding 15 kW, Spindle layout:, 1. Horizontal bottom spindle, motor power 11 kW, 2. Vertical right spindle, motor power 7.5 kW, 3. Vertical left spindle, motor power 11 kW, 4. Vertical right spindle, motor power 7.5 kW, 5. Vertical left spindle, motor power 7.5 kW, 6. Horizontal top spindle, motor power 11 kW, 7. Horizontal bottom spindle, motor power 15 kW, 8. Horizontal top spindle, motor power 11 kW, 9. Horizontal bottom spindle, motor power 7.5 kW, - Hydraulic front bearing for spindle 1, 6 - 8, - Equipped with jointers, - Surface table 2500 mm, - Spindle diameter 50 mm, - Automatic lubrication system, - Driven feeding rollers in table, - Heavy duty cardan feeding, - Digital read out feeding speed, - Incl. accessories

Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMAHydraulic power unit Year of construction approx. 1985Operating pressure: max. 65 barVolume flow: 20 litres/min. Fuel tank capacity: 110 litersEngine power: 3 kWMortor speed: 1440 rpm. Mains connection: 400 volts, 50 Hz- 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1- 1 piece drive motor KATT, type FFN 100L- 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM- 1 piece return filter- 1 piece 4/2-way hand valve (e.g. for retracting and extending a double

Special price because without dukumentation / without disc without funnel +VAT (reclaimable) R1277 Injection moulding machine Arburg A 270 Hydronica D-Version Dialogica topZustand screw D 30mm with device for injection into the parting plane a viewing is desirable by appointment Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations).

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 4600 mm   space requirements -front/back-: 600 mm   total height: 1200 mm   total weight approx.: 500 kg ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz

Inv. Num. : 8653 Type: Hydromat 23 Producer: Weinig Generated: 2000 Parameters: Maximum vertical spindle speed: 6000 1/min Number of Spindles: 8 Spindle diameter: 50 mm Machine height: 1740 mm Machine length: 3900 mm Machine width: 1900 mm Machine weight: 4600 kg

SPECIFICATIONS: Feed length: 1980 mm Working width: 220 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 8 Shaft drive (7.5 kW) Installed power: 64 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (5.5 kW) 2: right (5.5 kW) 3: left (5.5 kW) 4: right (5.5 kW) 5: top (7.5 kW) 6: bottom (7.5 kW) 7: top (11 kW) 8: bottom (7.5 kW) EQUIPMENT: Complete with accessories

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Hydrovoima piece Weight: 400-1500 gr the water content: 70-80% condition: Renovated In store Made in Finland Description rates of up to 1,800 pieces / hour or 1,500 kg / hour

Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Hydrovoima Made in Finland Description Hydrovoima rye bread double divider used good working condition Sale on behalf of customer

General SKU291W494 LocationBarneveld MakeSartorius Stedim TypeSartoflow Advanced No.4143000387 Year of construction2022 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Filter surface0.1-0.5 m2 Information Total height0,90 m Weight120 kg CEcheck Floor space0,75 x 0,80 m Extra SpecificationsPressure vessel jacket, volume 10 l, pressure -1/+4 bar, test pressure 7,15 bar, allowable temperature-10°C/+150°C. Molecular Weight Cut off: 10 kD Endress+Hauser dosimag, touchscreen control Technical specs Extra informationVolume 10 l., pressure -1/+4 bar, test pressure 7.15 bar, allowable temperature-10°C/+150°CMiscellaneous filtersSartorius Stedim SystemsFilters > Miscellaneous filtersBrand > Sartorius Stedim Systems What you can expect from Foeth: -- Machine is in working condition -- At a red ...

400 Ton Hydromec HF4000 Non-Ferrous Hot Forging Press Line MANUFACTURER – HYDROMEC YEAR – 2000 SERIAL NUMBER – 660 MODEL – HF4000 C/D MATERIAL – NON-FERROUS TONNAGE – 400 TON (4000 KN) STROKE – 380MM STROKE PER MINUTE (CONTINUOUS) – 22-35 STROKE PER MINUTE (SINGLE STROKE) – 22-45 RAM ADJUSTMENT RANGE – 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) – 865MM SIZE OF TOOL MOUNTING PLATE – 1000MM X 1000MM MAIN PRESS MOTOR – 59 KW MAIN MOTOR RAM ADJUSTMENT – 2.2 KW CUSHION FORCE – 70 TON (700 KN) CUSHION STROKE – 40 – 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS VIRTUAL WALK Combination Lot of the following: Lot No. O233 MAESTRI Gas  ...

Weinig Hydromat 23C four-sided planer Working width 230mm Working height 160mm Number of spindles 7 Spindle layout: 1.Down 15kw 2.7.5kw rights 3.Left 7.5kw 4.Top 15kw 5.Lower 30kw (multi-saw) 6.Lower 7.5kw (hydro support) 7.Upper 7.5kw (hydro support) Spindle speed 6000r.p.m Spindle Diameter 50mm 4 pulling rollers in the working table Inverter-adjustable feed speed up to 36m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

Working width: 220 mm Working height: 120 mm Working height 4-sided: 120 mm Number of Spindles: 10 Spindle arrangement: urlrlououuni Spindle diameter: 50 mm Spindle speed: 6000 rpm Counter bearings: 1-6-7-8-9 Jointer: 1-2-3-4-5-6-7-8-9 Motor powers: 7.5-7.5-11-11-11-15-7.5-11-11- kW Feed speed: 8-80 m/min Feed motor: 18.5 kW Feed: Hydraulic Table lubrication: automatic Weight: 9000 kg Space requirement: 700x160x140 mm Voltage/Frequency: 380V

Cutter Rex Düker Hydro 100, completely in stainless steel, with ejector, bowl capacity 100 litres, Stepless knife speed, mixing gears, Connection 400V, main motor 35kW, weight approx. 1750kg, good used condition, fully functional

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Rexroth Hydronorma, hydraulic unit from Krauss HS 50 injection molding machine -Pump: Type 1PV2V-16/50RA01 MC160A -Motor: Bauknecht 7.5 kW / 1440 rpm -Individual components: see images -Dimensions: 790/340/H400 mm -Weight: 133 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Rexroth Hydronorma, hydraulic unit -Hydraulic pump: Rexroth PV2V3-20/25R1MC 40 A1 -Motor: AEG 3 kW / 1420 rpm -Individual components: see photos -Hydraulic tank: tank capacity 120 l, with level indicator -Dimensions: 820/520/H880 mm -Weight: 232 kg

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve, balancing valve -Manufacturer: TA Hydronics, line regulation valve regulation valve, unused original packaging -Type: STAF-SG DN50 PN25 -Number: 3x valve available -Price per piece -Dimensions cardboard: 220/170/H270 mm -Weight: 6.8 kg/pcs

Planetary gearbox, gearbox, gearbox for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, -Manufacturer: Hydropa, gearbox for hydraulic motor -Type: EM1250 FE S45CR1 -Reduction ratio: 1 : 5 -Shaft: Ø65 x 105 mm -Hole shaft: Ø 100 / 94 mm -Number: 2x gearboxes available -Price: per piece -Dimensions: Ø 400 x 500 mm -Weight: 133 kg/piece

Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm -Weight: 6860 kg

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed table In the machine 4 driven feedrollers Hardened table (with exception of the infeed table) Separate controll cabinet and electrical cabinet Automatic bed lubrication Pneumatic pressures Outfeed table with height adjustment 0/0,5/1 mm Sound enclosure with electromagnetic security Capacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm) Feedspeed: 6 - 36 m/min, motor 7,5 kW Number of spindles: 8 Spindle diameter: 50 mm Spindle speed: 6000 rpm Bottom 7,5 kW, outboard bearing Fence 7,5 kW Near 11 kW Fence 11 kW Top 15 kW, outboard bearing, straight jointer Bottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm) Top 11 kW, table prepared to take wooden inserts Bottom 11 kW, outboard bearing, straight jointer

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

CONTROLS   electronic controls BOSCH REXROTH CML 40.2 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE   length: 50 mm   diameter: 700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 100 kW The machine processes workpieces with an outer diameter of 20–50 mm and lengths between 300 and 700 mm. With a cycle time of approximately 20 seconds, it enables high production speeds whilst maintaining consistent quality.

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

For sale are several hydraulic expansion chucks from Schunk Prices and other inventory on inventar-verkauf.de/id/alesco The condition is used. There are usual signs of wear. I would be happy to make an offer for all of them in the package.

spindle diameter: 135 mm x-travel: 950 mm distance between columns: 1100 mm y-travel: 700 mm cross rail adjustment - vertical: 780 mm quill travel: 300 mm max. distance between table and spindle-nose: 1000 mm table surface area: 1100x842 mm table load: 1500 kg speeds: 40-2000 U/min adjustment speed: 5-1500 mm/min electrics - voltage/frequency: 380/50 V/Hz total power requirement: 8 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,3x2,34x2,8 m total power requirement: 8 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,3x2,34x2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible.

Complete bottle forming, filling and packing line for 1,5 liter sterilized milk with blowers, filler, capper, sterilization towers, palletizers etc. The line is already dismantled and boxed in crates., General:, Size of the bottles: 1,5 liter milk bottle with stopper (cap), Bottle dimensions: width 93,9 mm, height 282 mm, Weight bottle: 44 gram, weight aluminium 0,4 gram and weight cap 4 gram, Material of the bottle / Compesition: PE (Polyethylene), Neck diameter of the bottle: 46,7 mm, Bottle closed with a aluminum and easy peelable cover, Capacity of the line: 7.000 bottles per hour, Product: Whole cow’s milk, which has been treated with a heating process in such conditions of temperature and time able to ensure the destruction of microorganisms and the inactivity of their resistance forms., Closed bottle shelf life: 6 months since the date of manufacture, Opened bottle: maximum thre ...

automatic switch plate 1x saw unit with saw, head and saw valve 40/80 1x turning unit with turning valve 30/60 with flange 9x units 30/60 with valve normal and flanges 5x units 20/50 with valve normal and flanges 1x oil distributor WK9; 1x bar feeder 4 meters; 1x chip conveyor VR500; 1x hydraulic unit 1 Knoll oil filter Without collets and ejectors, without platform and without tool monitoring. supplied tooling may differ from the pictures. We can send you more pictures. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Rotary transfer machine Manufacturer: Pfiffner Type: Hydromat HB 32-45/16 CNC Yob: 2013 Electro-hydraulically controlled, fully automatic Extract from offer: Coolant system with chip conveyor and Knoll vacuum rotation filter High pressure pump 50 bar Second coolant ring Water cooler type 1600 Collets type B32-45 UP Control: Siemens Sinumerik 840D - CNC / S7-PLC incl. modem (for teleservice) 1 bar loading magazine type IEMCA: bundle loader (yob. 2011) 1 Sawing unit: Saw blade D250mm 2 Feed unit VE 26/80-HSK: Spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 32 2 Vertical support 26/80 with 36° angular position 2 drilling head 26/80-HSK: HSK 32 1 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40 4 Feed unit VE 36/100-HSK internal cooling: Spindle stroke max. 100mm; spindle speed max. ...

Turbine Turbine mileage: 30,000 hours Counter-pressure turbine Manufacturer KKK Initial commissioning in 2002 Type: CFR5 G6a Power Max: 2500 kW Operating power: 2200 kW, Speed 23000 rpm, Fresh steam pressure: 65 bar, Fresh steam pressure temperature: 480 C, Evaporation pressure: 1-17 bar, Investments in 2002, Total steam forming station renewed from 63 bar to 2.5 bar in 2002, El. Generator Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA renewed, Complete measuring, control, control technology of the turbine renewed, steam turbine renewed With Energy Installed boiler power Boiler I Coal Steam generation: 20 t/h, 63 bar, 495 C Boiler II Coal Steam generation: 13 t/h, 34 bar, 425 C Boiler III: Combined burner for oil and gas, steam generation: 20 t/h, 17 bar, 285 C General overhaul of the entire plant from 2002 to 2004, steam generator renewed, automatic charcoal and  ...

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

One used AEG Kanis G 20 back pressure steam turbine from 1985 in good running condition.  The steam inlet pressure of 14 bar can be increased up to 20 bar. Alternators with other voltages are also available on request. For Sale type: AEG-Kanis G20 el. power: 2046 KW generator end: AEG 2650 KVA, 5250 Volts, 50 Hz, cos phi 0,8 steam consumption: 40 to/h at full load steam inlet pressure: 14 bar (up to 20 bar possible) back pressure: 4,5 bar inlet steam temperature: 320 °C gear ratio: 8,04 manufactured: 1985 mesurements: 8,30 L 3,00 H 4,2 W price on request: Here you can download all the turbine pictures (30 MB):  abc.stromerzeuger-discount.de/AEG-Kanis_G20_back_pressure_2046_kw_stea m_turbine_14_bar/all_pictures.zip Here you can download the scope of supply      (13 MB):  abc.stromerzeuger-discount.d ...

Dear's Sale, T/C complate ABB TPS 52 Recon, Good condition Regards +905323642509 info@kscege.com

Price on request. FCA free loaded in our warehouse. One second hand Siemens Twin AFA 46 condensing steam turbine manufactured in 2009 for sale. turbine: Siemens type: Twin AFA 46 el. power: 3.300 KW running hours: steam consuption: steam inlet pressure: 26 bar inlet steam temperature:400°C manufactured: 2009 generator: AVK powerrating: 4.125 KVA volts: 6.300 volts Hz: 50 Hz price on request: Stromerzeuger-Discount Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 0049/1635263546 Telefon: 0049/ 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Turbine Turbine operating hours: 30,000h Backpressure turbine Manufacturer: Kkk First start-up: 2002 Type: CFR5 G6a Power max: 2500 kW Operating efficiency: 2200 kW, Number of revolutions: 23000 rpm, Live steam pressure: 65 bar, Live steam pressure temperature: 480 C, Evaporation pressure: 1-17 bar, Investments in 2002 , Entire steam transformation station renewed from 63 bar to 2.5 bar in 2002, El. Generator Fa. Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA, renewed, complete measurement, control and control of the turbine renewed, steam turbine renewed with energy production General overhaul of the entire plant from 2002 to 2004, steam generator renewed, automatic corder and ash removal system renewed, water treatment plant renewed, complete instrumentation renewed, flue gas cleaning plant Lurgie renewed from 1991 - 2001 Mistakes excepted!

1300 KW KK&K CFR3 G5A tandem condensing steam turbine 40 bar inlet pressure from 1997 with 50.000 running hours in very good working condition for sale. Scope of supply: controlpannel, turbine with generator, documents. turbine: KK&K type: CFR3 G5A el. power: 1300 KW steam inlet pressure: 40 bar manufactured: 1997 generator: AEM type: SE 500 M4 powerrating: 1830 KVA volts: 400 volts Hz: 50 Hz price on request: Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

51 MW - CCGT comprising 3 x 12 MW Solar Gas Turbine generator and 1 x 15 MW steam turbine generator Model : TITAN 130 Capacity : 12 MW Voltage ; 11 KV / 50 Hz Qty : 3 sets Titan 130 + 1 set STG Year : 2012 Running hr : 6000 hrs since new

Complete 48 MW Westinghouse W251-B11A Gas Turbine with a Brush electric generator, 3000 rpm, 50 HZ, 11.5 KV, may be modified as Dual Fuel GT ied

Solar Gas turbine Taurus 65 SOLONOX The turbine and gear box is from 2022 and it only has 2000 running hours. The package is from year 2011. The condition is excellent and is ready to start working, in addition it included Solonox mode and fire extinction module. All the maintenance has been done by Turbomach official service. The equipment is already dismounted on our warehouse and ready to be load. It is available all the systems except the exhaust system that is optional. It is possible to have a visit and a inspection of the turbine. Also is available a boroscope of the turbine. YOM:2022 Power: 6300kWe Fuel: Natural Gas Working Hours: 2300 h Voltage: 6300V