hydro turbine used for sale

Material thickness: 1 mm Punching capacity: 1 t Stroke: 1 mm Throat: 1 mm 3 driven rolls (hydromotor and planetary gear)strong welded steel construction ;lower rolls hydr. adjustable ;digital read-out for lower rolls positionsplane rolls  rolls (forward-backward hydraulic, rest manual) horizontal and vertical operation ;Control console for- and ;backward drive& machine and equipment according to  ;CE regulations Horizontal and vertical:  Shaft Ø:               140-120mm Number of rolls:       3 Capacity flat:         120 x 25 x 1300mm Capacity Tube:         114,4 x 3,2Ø x mm Capacity bar:          100 x 100 x 16mm Capacity T-Profile:    130 x 14 x 1300mm Capacity HEA-Profile:  HEA 140 x 1200mm Working speed: ...

Welding length: 4700 mm Part diameter minimum: 20 mm Overall length: 50000 mm Overall height: 5400 mm Welding machinePEMA - PBW 5000/2 MACH-ID 8490 Make: PEMA Type: PBW 5000/2 Year: 2015 Pemamek PEMA PBW50002 Plate Butt Welding Line Butt welding line for steel plate, 1000 to 4700mm in width and 20 to 120mm in height/thickness, joins sections of plate prior to rolling into can shapes used for the construction of large scale off shore, 62m 800T, jacket foundations and towers for wind turbine towers. The welding equipment is situated on a carriage that traverses the work piece on an overhead beam. The welder comprises of a laser guided tandem head submerged arc welder with electric induction pre heater. The steel plate sections are positioned and held using hydraulic pins and a set of electronic magnets The PEMA RC5200 conveyor system is designed to move and push plates throug ...

This equipment is built according to the European Pressure Equipment Directive 97/23/CE, able to treat products under pressure up to 10 bar and ambient temperature of unpacked food products inside a refrigerated container at -20 ºC. It consists of a bayonet locking door with automatic operation by means of hydro-pneumatic cylinders and internal pressure safety device. Pressurized door seal to apply pressure and vacuum. Autoclave accommodated inside a refrigerated container on a stainless steel leg stand. The rails on which the trolleys roll are made of stainless steel. Equipment in perfect condition. Features Capacity: 10 baskets Diameter: 1.500mm Length: 10.000mm Thickness: 10mm Design pressure: 10 bar Ringing pressure: 10 bar Design temperature: 20ºC Service Temperature: 20 ºC (+/- 18ºC)

Ø 65 - 3000mm Dimensions: 900x4200mm Connected to this machine: Gildemeister Twin 65

Used Bottling Line for ESL MILK up to 2500 bph We present a used bottling line engineered for maximum efficiency and reliability in packaging ESL milk Furthermore this line is optimized to ensure continuous and high quality production with a nominal capacity of 2500 bottles per hour bph Nominal Capacity and Configuration of the Bottling Line for ESL Milk The nominal capacity of 2500 bph arises from a precise arrangement of the main components Firstly the line includes 12 filling heads and 1 capping head ensuring a smooth and uniform flow during the bottling process Moreover it handles round PET bottles with a standard format of 1000 ml Product and Packaging Specifications This line is designed for round PET bottles with a standard format of 1000 ml It accommodates both pasteurized and ESL pasteurized milk ensuring maximum versatility in production Power Feeding and Distribution Features  ...

Schaltschrank und Ventilsteueranlage Leistung ca.15.000 - 20.000 ltr / Stunde, abhängig vom Produkt. automatische Selbstaustragung (Englisch: self cleaning disc separator) Hydrohermetischew Dichtung (für Bier,Kvas und andere sauerstoffempflindliche Produkte geeignet Westfalia Separator SA 60-47-076 Selbstaustragend 3000 -15000 l/h Schaltschrank und Ventilsteueranlage More then 300 machines new and second hand on our seema .de

Description: Washing Machine Serial number 6637 Double tank 28 jets on a table with dimensions 800 x 500 mm Approx. Onsite Dimension. (l x w x h): 2,300 x 1,500 x 1,800 mm, weight approx.: 2,500 kg

HÖFLER H4000 CNC Gear Grinding Machine Year: 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition

Description: • Moulder with Feeder • Serial number 023-2422 • Total installed power 97.25 KW • Working width up to 230 mm • Working height up to 160 mm • Total table length 5400 mm • Entrance table length 1450 mm • 8 heads: bottom 7.50 KW - right 7.50 KW - left 11 KW - right 7.50 KW - top 11 KW - top 11 KW - bottom 11 KW - universal 11 KW • Spindles diameter 50 mm • Spindles rotation speed 6000 rpm • Variable feed speed from 6 m/min up to 36 m/min •  ,WEINIG 814,300 feeder with 90° loader: year of manufacture 2000, serial number 89957, loader length 2750 mm, with 6 loading arms of approx. 1500 mm • Some accessories are included Approx. Onsite Dimension. (l x w x h): 8,350 x 2,800 x 1,800 mm, weight approx.: 8,000 kg

Mitre Cold Circular Saw EISELE Type VMS-III-S-PV Type No. 430 Colour No. 2371 Year of construction 1991 Saw range at 90 (round) 120 mm Sawing range at 90 (flat) 150 x 110 mm Sawing range at 45 (Round) 100 mm Sawing range at 45 (Flat) 120 x 100 mm Saw blade diameter 350 mm Saw blade speed 17 + 34 rpm. Mitre cut 45 to the left, 90 and up to 30(60) to the right infinitely variable motor power 2 and 2.6 kW mains connection 380 volts, 50 Hz - two cutting speed levels over 2 engine speeds - hydro-pneumatic saw slide lowering infinitely variable - pneumatic material clamping - saw carriage on very stable rectangular guide - electric coolant pump in the machine substructure space requirement L x W x H 1100 x 710 x 1850 mm Weight 460 kg good condition; used

Description: machine number: S3-CNC 311-ATC operating hours: approx. 64940 hrs. spindle hours: approx. 7633 hrs.  , travels: X-axis: 400 mm Y-axis: 250 mm W-axis ,(grinding head): 250 mm feed rate: X-axis: 0 - 1800 mm/min. Y-axis: ,0 ,- ,1800 mm/min. W-axis: 0 - ,3000 mm/min. table dimensions: 600 x 380 mm max. ,table load: 200 kg grinding spindle speed range: with electric motor: ,9 - ,45000 rpm with air turbines: up to 100000 and 160000 rpm planetary rotation stepless: 5 - ,300 rpm stroke speed of grinding spindle sleeve with quick stroke: 0,5 - ,12000 mm/min. stroke of grinding spindle sleeve: 110 mm diameter of grinding spindle sleeve: 100 mm  , new control unit: ADCOS CNC 800 (Swiss made) - RETROFIT ! with dressing spindle system: KAISER C 42 DC magnetic clamping plate with fire extinguishing device: Kra ...

Description: Bag filter suction system Flow rate: 230.000 m3/h at 20 30ºC 1 Inlet section 3000 x 1700 mm 1 Turbine of 250 kW power 1 Metal chimney of diameter 2800 mm, height 20000 mm, with silencing chamber and height 4000 mm 1 Bag filter with 2 chambers of 12000 x 5000 x 11000 mm 1 Bagging outlet with 2 pneumatic valves Approx. Onsite Dimension. (l x w x h): 17,000 x 5,000 x 12,000 mm, weight approx.: 15,000 kg

Description: Bag filter suction system Flow: 110.000 m3/h at 20-30ºC 1 Turbine of 160 kW power 1 Inlet channel, cross section 2500 x 1500 mm 1 Bag filter with two chambers, dimensions 10000 x 4800 x 11000 mm 1 metallic chimney, diameter 2000 mm and height 20000 mm 1 Bagging outlet, with 2 pneumatic valves Approx. Onsite Dimension. (l x w x h): 18,000 x 3,000 x 20,000 mm, weight approx.: 10,000 kg

BÜHLER two-roll mill The two rollers are mounted in a stable, welded frame construction and can be inspected via inspection doors mounted on the side. The rollers are cooled automatically with temperature preselection and remote thermometers. A hydrodynamic roller pressure is installed for precise gap stability, whereby the gap size can be adjusted mechanically. Output: approx. 4,500 kg per hour with a fineness of approx. 120 - 220 my Roller width: approx. 900 mm All information according to the manufacturers brochure description, whereby equipment features may deviate from the standard.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51000 € : 1025.1 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4770 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE M ...

Description: - bar length: 3 m - Max capacity : ∅ 65 mm Equipped with : - 1 Automatic bar feeder Stock N° : EX360 weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 4,300 x 900 x 1,300 mm

Dear Ladies and Gentlemen, We have constantly used transformer stations for wind turbines from 630 KVA to 2500 KVA in very good condition in stock

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

Gas Turbine package Serial Number: 05770 Control System: GE Speedtronic MKV Year 1994 Power: 39 MW Running hours: 161.515 hours GEC ALSTHOM Alternator. Model T-190-240 3 phase Serial Number: 413948 YOM 1994 Installed Power: 35.52 kva Speed: 3000 rpm GRAFFENSTADEN reductor. Model TRL65 CV

Single column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press Fabr. No. 97148 Year of construction approx. 1980 Compressive force: 10 ton Projection: 100 mm Plunger stroke: approx. 20 mm Plunger surface: 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with pressure transmission Air to oil - Pneumatic foot switch - Plunger with internal thread M12 metal substructure space required L x W x H 850 x 620 x 1560 mm weight approx. 200 kg good condition; used

The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine. Boring spindle diameter 221 mm Boring spindle taper ISO 60 Headstock section 1145 x 860 mm Power of main drive motor 100 Kw Gearbox steps 2 Main spindle speed 2,7-600 rpm Column horizontal travel (X axis) (machine 1) 18000 mm Column horizontal travel (X axis) (machine 2) 22500 mm Headstock vertical travel (Y axis) (machine 1) 5000 mm Headstock vertical travel (Y axis) (machine 2) 6000 mm Headstock horizontal travel ( W axis) 1500 mm Boring spindle travel (Z axi ...

Description: Machine suitable for hydrodemolition, sandblasting and industrial cleaning. Maximum working pressure: 500 bar. LOMBARDINI 4-cylinder engine with TURBO. Declared hours: 750.-The information given is approximate and does not represent the real condition of the machine. For assessment assess inspection. Approx. Onsite Dimension. (l x w x h): 1,300 x 2,100 x 1,500 mm, weight approx.: 1,500 kg

This STAR SV-12 Swiss Type Turning was manufactured in 2006 in Japan. It is built for precision and efficiency in small part machining. With a maximum bar diameter of 12 mm and a maximum workpiece length of 205 mm, this machine offers exceptional versatility for intricate components. Controlled by the renowned FANUC 16i system, it ensures seamless operation and precise control over every aspect of the machining process. Equipped with 8 axes (X / Y / Z1 / A/ B / E / Z2) for enhanced machining capabilities, the STAR SV-12 enables complex geometries and precise contouring. With a spindle speed of 12000 rpm, this machine delivers high-speed machining performance. Barfeeder LNS Hydrobar THB included.

2015 Manufacture Date 0 hours since manufacture Stored continuously been stored indoors a temperature-controlled building since delivery (still crated) 7901S Taurus 60 (SoLoNOx) 5670/kWe Generator 13800 Volt 60 HZ (1800 RPM) 3 Phase No enclosure, open skid TURBOTRONICS PLC 4 with TT4000 Display FAT tested by Solar Turbines VFD start system Complete Air inlet filtration system Complete site (equipment) inspection performed by Solar 2019

material: . Dimensions (L/W/H): 530 x 370 x 200 mm Loading: 70 kg tank capacity: l Heating: 3 kW Control: DÜRR total power requirement: 29 kW weight of the machine ca.: - t dimensions of the machine ca.: 3 x 1,2 x 2,6 m Cleaning system - Dürr Ecoclean Compact 80C Permitted cleaning medium: Hydrocarbon VbF A3 Lowest flash point: 55°C Heating capacity: 3 KW Operating hours: 59642.88 h Technical data: Product - Product: Petroleum solvent type A3 (hydrocarbon) - Cooling: Air - Washing chamber: Max. Max. load Dimensions: 530 x 370 x 200 [mm] Basket size Max. Max. load of batch / weight: 70 [kg] - Charging height: 935mm / manually via roller conveyor Roller conveyor length: 0.75m - Cycle time: 8 to 15 [min] adjustable - Stepless distillation: 50 [L/h] - Electrical supply: 3x400 V, 50 [Hz] - Compressed air consumption: 100L/h The system has an optional distillation unit to recover the solv ...

SINGLE SHAFT SHREDDER, V-Rotor width 800 mm, diameter 260 mm., Rotor speed 80 - 125 rpm, 250-350 kg/h depending on material and screen size, 37 kw drive, No.42 knives size 40 x 40 mm., Screen size bespoke to project, from 15 up to 80 mm, Hopper 800 x 1.450 mm, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit sw ...

Turning diameter: 2000 mm Turning length (Z-axis): 3700 mm Spindle bore: 100 mm Turret positions: 1 Motor power: 55 HP/kW Chuck diameter: 1600 mm LatheZERBST - DP1 S3 x 3700 MACH-ID 8737 Make: ZERBST Type: DP1 S3 x 3700 Year: 1992 4 chuck 1600 mm Heidenhain digital read out Steady rest 710 mm Powered tailstock Threath cutting  Triple guide ways cast irion bed design For turbine rotors, electrical motor anchors , reactor vessels, cylinders, rope pullys, marine propulsion shaft, castings, shafts and cement industry DBC Turning Length:      3700mm Swing over bed Ø:        2000mm Swing over cross slide Ø:1600mm Spindle bore:            100mm Spindle power:           55kW Stroke pinole:           210mm Speeds / ranges:    &n ...

Description: no type plate, 2 packages 1- 4500 x 1000 x 2500 // 2- 3000 x 1200 x 8000 Approx. Onsite Dimension. (l x w x h): 4,500 x 1,000 x 2,500 mm, weight approx.: 1,800 kg

Master Magnets Permanent Magnet Strap Length frame A.A.= 2200 mm , belt width : 700 mm. Block : L= 1450 x W=600 x H=200 mm. Power Requirement : Hydromotor

Gas Turbine package Serial Number: 05770 Control System: GE Speedtronic MKV Year 1994 Power: 39 MW Running hours: 161.515 hours GEC ALSTHOM Alternator. Model T-190-240 3 phase Serial Number: 413948 YOM 1994 Installed Power: 35.52 kva Speed: 3000 rpm GRAFFENSTADEN reductor. Model TRL65 CV

Description: Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet Saw blade diameter 420 mm Cutting range at 90 degrees: around 130 mm Cutting area at 90 degrees: flat 160 x 100 mm Cutting range at 45 degrees: around 110 mm Cutting area at 45 degrees: square 130 x 80 mm Speed 3000 rpm Motor power 2.0 KW Total power requirement 3.0 kW Machine weight approx. 190 kg Dimensions L x W x H 3,0 x 1,0 x 1,3 m weight approx.: 190 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,300 mm

Description: Machine coming from an industrial company that restructured its production to expand its production.  ,The machine was working until February 2024 and has been dismantled by AMADA and stored since that date.  ,It has a new turbine. , Serial  , ,Number: 4558175 Working Hours: 31.500 horas , Turbine new Laser power: 4,0 kw Working Range: X: 2520 mm Y: 1550 mm Z: 300 mm Table loading capacity: 330 kg , Machine was dismantled by AMADA and now is stored , table length: 2,520 mm, table width: 1,550 mm, laser capacity: 4 kW, weight approx.: 7,700 kg, Approx. Onsite Dimension. (l x w x h): 57,545 x 2,630 x 2,789 mm

Description: Working hours approx.: 269h No fault codes, perfect condition. ENGINE: Stage V, Yanmar 4TNV98 engine,  ,50.7 kW, 3318 cc-  , Water-cooled, 4-stroke diesel, 4-cylinders in line High capacity fuel tank: 120 l Auto-idle and one-touch idle Idle shutdown system Cooled Exhaust Gas Recirculation (CEGR) Electronic fuel injection High pressure common rail system Auto-engine warm up Emergency stop Glow-plug pre-heat EPF (Engine Protection Feature) Dual-stage fuel filtration with water separator message in cabin Fuel final safety filter Dual element air filter Remote oil filter Green plug oil drain 24-Volt system Battery disconnect switch Fuel cooler Fuel filter restriction indicator Fuel shut-off valve TRANSMISSION Two-speed hydrostatic transmission, with variable displacement axial piston motor and automatic travel speed shif ...

Extruding and mixing at same time capacity: 250 L Screw Diameter: 223 mm blades: 2 x 15 kW Extruder: 1x 18.5 kW Hydraulic control unit, valves, very simple and strong 3 handles: 2 for the Z blades, 1 extruder,nbsp; The twin blade profile design makes the Z blade highly efficient. • Integrated lid designs. • Heating/Cooling jacket and nozzle options. • Food grade standard. • Split gland seal housing for easy maintenance. • Pelletising options Sealants, silicone rubber, hydrocolloids, adhesives, mastics, brake linings, abrasives, welding materials, ceramics, chewing gum, gum base, confectionery, sugar pastes, biscuit dough, energetics, fibreglass dough, metal powders, detergents, soaps, etc. Driven : 400V 3 Phase Power: 48.5 kw Dimensions: 2800 mm Length : 1100 mm Depth: 2200 mm

Description: Rotating Telescopic Handler serial number ZF1RT40A9C5000532 engine detailsIveco 6 cyl. turbo 145 hp max lifting capacity 4500 kg Capacity at maximum lifting height 2500 Kg max lifting height 21 mt hydraulic system max delivery120 lt/min hydraulic system pressure 230 bar fuel tank capacity 155 lt max travel speed 40 km/h traction 4x4 transmission hydrostatic number of gears 2 tires size 18-22.5 tires condition 90% IMPORTANT:  , For the loading it's needed a suitable transport vehicle , (equipped with ramp) and the equipment can be driven on it. Dimensions and weight are approximate, , Operating hours ,might by slightly different For more detailed information, please see PDF file (roto-series-en.pdf) Approx. Onsite Dimension. (l x w x h): 8,800 x 2,400 x 2,900 mm, weight approx.: 15,500 kg

Overview  The Filling Line is located at a Spanish dairy and has so far filled dairy products into 1.0l and 1.5l containers made of PE-HD. The Filler has a capacity of 10,800 bph. The line is still installed and can be visited.  Machines overview  Bottle unscrambler Erecting of bottles before feeding into filler Manufacturer: LANFRANCHI Model: L2SR 14-1  Year of manufacture: 2008 Empty bottle turner Cleaning before filling by means of food grade air  Manufacturer: SIPAC Model: SPC281 Year of manufacture: 2008 Filling machine  Separation of the bottles, Filling of the bottles, Sealing of the bottle by heat, Ejection of bottles with wrong filling weight Manufacturer: SERAC Model: R36T36/1620 Year of construction: 2007 Aluminum cap punch  Punching of aluminum caps from metal tape rolls Manufacturer: Fords  Model: 320 MD Press  Year of manufacture: 2007 Leak tester  Testing the ...

The reactor volume of 150 l (Useful volume of 120 l) is designed for the preparation, sterilization and storage of technological solutions and nutrient medium, as well as for separate collection of biomass concentrate and supernatant after centrifugation. The reactor is made in pharmaceutical design, and the total volume of the reactor vessel in the geometric ratio H / D = 2 (height to diameter); made of AISI 316 L stainless steel, equipped with a Rushton type bunker turbine mixer, has a removable elliptical cover, elliptical bottom and top magnetic drive. The reactor vessel provides for the installation of sensors and regulatory elements of the process control interface.

Indramat 3 Pulse Thyristor Control Amplifier, Type: TRK 3-WR 109-215-3201 b – 4 TRK 3 3 pcs permanent magnet DC – servo drives MDC 10.20 2000rpm , 1477 , MDC 10.40 – D / MS – 1 / 50 2 , 1477 , 2000 rpm Can also be used as a power generator. Water wheel, wind turbine, ... Three-phase transformer , DTTS , 6KVA, Pr. 3x380V 9.1A, Sec. 3 x 220V, 15.7 A Throttle SK D4 Exact descriptions and E-plans of the motors and the amplifier ! Items on request

1 wood chip hot water combined heat and power plant with steam turbine Part B Manufacturer: Schmid AG, CH Eschlikon Year of construction 2006 Type: UTSR-3200 Fabr. Item No.: 56103927 Boiler class: CAT 4 Ab. Operating pressure 38 bar Nominal heat output 2100 kW Water capacity: 20,500 l El. Connection: 150 amps El. Consumption; 100 kW The Schmid wood firing system with forest wood chips or residual wood from the wood-processing industry works fully automatically with the following sections a.) Fuel storage b.) Wood chips discharge and transport for incineration c.) Combustion via a firing grate d.) Heat exchange with water e.) Exhaust gas purification and ash removal by a multicyclone and centrifugal force system and exhaust fan f.) Fireplace system g.) Automatic ash discharge via piebald transport h.) Control cabinet system Important control data: ...

Indramat 3 Pulse Thyristor Control Amplifier, Type: TRK 3-WR 109-215-3201 b – 4 TRK 3 3 pcs permanent magnet DC – servo drives MDC 10.20 2000rpm , 1477 , MDC 10.40 – D / MS – 1 / 50 2 , 1477 , 2000 rpm Can also be used as a power generator. Water wheel, wind turbine, ... Three-phase transformer , DTTS , 6KVA, Pr. 3x380V 9.1A, Sec. 3 x 220V, 15.7 A Throttle SK D4 Exact descriptions and E-plans of the motors and the amplifier ! Items on request

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

CONTROLS   CNC controls SIEMENS SINUMERIK WORKING RANGE SURFACE GRINDING   grinding length: 1260 mm   grinding width: 505 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1250 mm   table surface (front-back): 500 mm GRINDING TOOL   type of grinding tool: wheel   diameter (max): 400 mm   borehole: diameter: 127 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4690 mm   space requirements -front/back-: 2670 mm   total height: 2850 mm hydrostatic guides very precise including roller diamond device Included: - various flanges - Exhaust air filter

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 60 mm   external diameter max.: 80 mm   wall thickness max.: 25 mm PRODUCT (PROFILE, TUBE)   length min.: 400 mm   lenght max.: 1000 mm ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW   mains power supply: 200 kVA   mains voltage: 400 V   mains frequency: 50 Hz System consists of:+ VAI SEUTHE TM90-3.0 cut-to-length line, YoM 2002+ BÜLTMANN tube bundle loader incl. cut-off head , YoM 1990 + FELSS axial forming system, YoM 1997+ Hydromation unloading system, YoM 1997Cycle time approx. 20 sec.max. diameter reduction: 30 mm

Gallus ECS 340, 2016(9) Unwinder with lift Corona 1-sided Web cleaner for 2 pages 5 x Multifunctional Stone 9 x Flexo movements 9 x UV drying 1 pump 22 color chambers 8 x antistatic passive 1 cold foil Gallus 1 x Laminator Gallus 1x Delam/Relam Gallus Video Kontrol E&L 1 x Rewinder Guillotine 9 x UV drying Autoregister Kontrol Rotary punch incl. hydrojack Matrix Rewinder Refrigerator Rail system

Description: The Rösler RHBE 15/20 is an overhead conveyor blast machine that is suitable for the surface treatment of heavy or large-volume workpieces. , General information Type: RHBE 15/20 Machine number: 42825/08 With air extraction and material recycling Technical specifications Machine type: Overhead conveyor blast machine Turbines: Gamma 300G Hook load: 500 kg Door opening approx.: 1500 x 2000 mm workpiece dimensions L/W/H: 2000x1500 mm, charge weight: approx. 500 kg, total power requirement: 62 kW, Approx. Onsite Dimension. (l x w x h): 6,000 x 5,000 x 6,000 mm, weight approx.: 5,000 kg

Description: Cogeneration plant for the electricity production from renewable sources The machine was created to be fueled with vegetable oils of rapeseed, sunflower and soybean oil, but thanks to the complex heated introduction system, it can burn animal fats and palm oil. The hourly production of electricity is equal to 940 kw/h The machinery is composed of: power source ,with fuel heating before combustion (underground tanks excluded) WÄRTSILÄ NSD 6R22/26 engine, produced in 1999 with a power of 1,065 kw at 1,000 rpm (power reduced to 940 kw/h to comply with authorisations) alternator DENOX system control panel catalytic silencer with cover and chimney chiller for cooling and heating systems hot water generation system with heat exchanger for powering warehouse heating systems transformer room ,with control panels, Landis+Gyr E650 meter, MESSINA SVT/R+AC/R medium  ...

faceplate diameter:4000 mm swing diameter:4300 mm turning height:2500 mm max. workpiece weight:63 t total power requirement:125 kW weight of the machine ca.:134 t dimensions:6100x10400x8400 mm Used Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

:TH-1000 | TH-1250 | TH-1600 grinding diameter:1000 | 1250 | 1600 mm grinding length:3000/4000/5000/6000/8000/10000/12000/14000/16000 mm swing diameter:1000 | 1250 | 1600 mm workpiece weight max.:20 t zwischen Spitzen max. workpiece weight:25 t mit Lünetten | 25-60 t mit Lünetten | 25-60 t mit Lünetten grinding diameter min/max:75-1000 | 150-1250 | 250-1600 mm dimensions of grinding wheel:915x100x304.8 (Option1060x150x508) mm traverse- head stock:quer: 550 | quer: 780 | quer: 910 mm feeding of spindle:0.001 mm cross feed autom.:3000 mm/min grinding spindle speed:500~1500 U/min traverse- head stock:längs: Spitzenweite + 200mm mm grinding spindle slide rapid travel:25~6000 mm/min tailstock quill stroke:170 mm tailstock movement:1800 mm/min rotation speed of workhead :5~50 1/min drive capacity - spindle motor:SIEMENS:40-60 PS x 4 Stück power capacity - workpiece power:SIEMENS:75-100 PS ...

:TH-200 | TH-250| TH-300 grinding diameter:2000 | 2500 | 3000 mm grinding length:3000/4000/5000/6000/8000/10000/12000/14000/16000 mm swing diameter:2000 | 2500 | 3000 mm workpiece weight max.:25 t zwischen Spitzen max. workpiece weight:120 t mit Lünetten grinding diameter min/max:250-2000 | 300-2500 | 350-3000 mm dimensions of grinding wheel:915x100x304.8 (Option1060x150x508) mm traverse- head stock:quer: 910 mm feeding of spindle:0.001 mm cross feed autom.:3000 mm/min grinding spindle speed:500~1500 U/min traverse- head stock:längs: Spitzenweite + 200mm mm grinding spindle slide rapid travel:25~6000 mm/min tailstock quill stroke:170 mm tailstock movement:1800 mm/min rotation speed of workhead :5~50 1/min drive capacity - spindle motor:SIEMENS:40-60 PS x 4 Stück power capacity - workpiece power:SIEMENS:75-100 PS x 6 Stück CNC controller:Siemens/Fanuc Brand new CNC roll grinders (wit ...

grinding diameter max.:10 - 175 mm regulating wheel width:610 mm max. width of grinding wheel:610 mm Maximum opening between new wheels:250 Recommended working range:10 - 175 mm Maximum workpiece lenght for infeed grinding - normal wheels:605 mm Maximum workpiece lenght for infeed grinding - recessed wheels:695 mm grinding wheel diameter:610 mm grinding wheel dia. (used wheel):380 mm grinding wheel width:610 mm Maximum witdth of receddes wheel:700 mm grinding wheel hole diameter:304,8 mm Peripheral speed:63 m/sec. dia. of control wheel:330 mm Outer diameter of worn wheel:255 mm regulating wheel width:610 mm Maximum witdth of receddes wheel:660 mm regulated disc boring:203 mm Speed of regulating wheel:10 - 850 1/min. control wheel inclined adjustable:5 Grad weight of the machine ca.:12 t dimensions of the machine ca.:4,8 x 2,1 x 1,1 m Centerless wide-wheel grinding machine for infeed oper ...