hydro turbine used for sale

hydraulic cylinders horizontal, hydraulic cylinders vertical ---------- Technical Data ---------- Press width: 3,500 mm, Press height: 2,250 mm, Cylinder stroke: 200 mm, Cylinder stroke horrizontal: 80 mm, Total length: 4500 mm, Motor: 1.5 kW, Space requirement (LxDxH): 4,500x850x3,000 mm Sold as is, without technical inspection

Olive cleaner, with input of olives with residues, output of leaves, output of earth and small residues from sieves. The machine is composed of: Roller screen, self-cleaning by means of a calibrated plate and high-resistance rollers 3mm thick. Air turbine, operating system based on an air current that affects the product curtain. The air is adjustable in direction and flow to ensure optimal separation. Double windlass, first windlass located near the vibrating tray to retain large branches and create a good curtain of olives for cleaning. Second windlass installed in the roller criva to help all those branches that due to their weight cannot dislodge the air turbine. Roller guide, chain drive system with easy access and protected by highly wear-resistant polyamide that completely soundproofs the machine. Leaf output regulator, to regulate the separation of the leaf and product dep ...

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Vertical Milling Machine Make: JAFO Model: FYN 50 NB X-axis: 800 mm Y-axis: 500 mm Z-axis: 500 mm Year of construction: 1988 Controls: Heidenhain Operating voltage 380 V Control voltage: 24 V Total power consumption: 10 KW Weight 4,000 kg The track-controlled JAFO - FYN 50 NB NC vertical milling machine is designed for milling work on parts weighing up to 700 kg, including the clamping device. Consoles with table are equipped with a hydraulic counterweight. The well-sized guideways for the console on the stand chest and the guideways of the table are hardened. All counter guides are covered with "TURCITE" plastic and always remain in contact with the corresponding guides along their entire length. (no overflow). The vertical milling spindle, which can be swivelled in one plane, is attached to the transversely adjustable crossbeam. The milling spindle is driven by a t ...

Planing and molding machine Weinig Hydromat 30 N for four-sided planing and profiling of large (wet) wood and Beams with high feed and including planing heads for the horizontal spindles., spindles: 4, spindle 1: Bottom / 10 kW / counter bearing / jointer, spindle 2: Right / 10 kW, spindle 3: Left / 10 kW, spindle 4: Top / 10 kW / counter bearing / jointer, working width: 300 mm, working height: 200 mm, table: Solid chrome plated and air cushion, Control: ATS system

Powerful rough terrain forklift from Esslingen (today Still) Has been restored before. Good condition. At call. Robust engine from Mercedes-Benz (OM314 3.8l diesel) known from the Unimog or LP808 Battery a bit weak at the moment, Engine + Hydrostat Top! Fork length 130cm Lifting height 3.3m Lifting capacity 3t Curb weight approx. 4.5t The truck can be viewed at any time. Several available. Take a look at our other listings. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844

max. format 53 x 74 cm Year of construction 2008 Press Center Alcolor film dampening units HydroStar cooling unit Autoplate automatic washing facilities Ultrasonic Double-Sheet Control Dry Pollinator Grafix Alphatronic 200 Low-pile delivery Totalizer read: approx. 117 million prints Price on request. We deliver and install worldwide!

Key data: 560 mm, 260 mm, 4000 1/min

MHC - Horizontal Pick-up Machine at call The MHC PickUp is a high-performance lathe with automatic tool handling for series production. It can optionally be equipped with bar feeder and with workpiece loading and unloading. The horizontal design allows turning diameters of up to 520 mm and workpiece lengths of up to 260 mm. Optionally available with Fanuc or Siemens control. The technology platform of the MHC PickUp is the Monforts tool machine DNC. The precise, reliable machining of the of the clamped workpiece by turning, drilling, milling via an overhead tool turret. In addition to bar loading, it is optional to equip with fully automatic workpiece loading and unloading. This is particularly important in the high-volume serial production offers significant time and cost advantages because manual In some cases, work steps are eliminated and throughput times ar ...

Manufacturer: Olaer Parts: Euro-Hydro - Brook Compton 3 Phase Cooler Matrix Maximum Static working pressure: 21BAR Maximum dynamic working pressure: 14 BAR (Tested according to ISO/DIS 10771-1 Heat transfer allowance: +-6% Maximum fluid temperature in the cooler matrix: 120 Celsius degrees Maximum Cooling capacity: 160kW Fluid compatibility Mineral oil: HL/HLP Oil/water emulsion: HFA/HFB Water Glycol: HFC Phosfatester: HFD-R Material Cooler matrix: Aluminium Fan housing: Steel Fan blades/hub: Glass fibre reinforced polypropylene/aluminium Fan guard: Steel Other parts: Steel Surface treatment: Electrostatic powder coated 3Phase Motor Insulation class: F Rise of temperature: B Protection class: IP55 1Phase Motor Insulation class: B Rise of temperature: B Protection class: IP 44 3Phase Motor LAC 004 Rated voltage: 230/400 50/60 Hz Insulation class: ...

Year of construction 2001 Hours of power up 16,400 hours Spindle rotation hours h 3,078 X axis - Longitudinal travel 7,000 mm Z axis - Vertical travel 2,500 mm Y axis - Transverse travel mm 1,250 (1050) Work progress speed mm/min 0 ÷ 4,000 Rapid feed speed mm/min 12,000 Maximum thrust on the X-Y-Z axes daN 2,200 Spindle motor power in S1 kW 30 Spindle motor power in S6 kW 37.5 Spindle speed at constant torque. rpm 0 ÷ 235 Spindle speed at constant power. rpm 235 ÷ 4,000 Maximum spindle torque in S6 Nm 1,500 Supply voltage Vac 400 Power frequency Hz 50 Total installed power kW 75.1 Spindle taper NOT INSTALLED Automatic head change Yes ISO 50 tool magazine no. pos. 60 Automatic tool changer installed HEIDENHAIN TNC430M CNC Positioning accuracy mm ±0.020 Repeatability accuracy mm ±0.010 Supplied accessories: - X axis bench with X axis telescopic cover - Up ...

Year of construction 1985 X axis - Longitudinal travel 4,000 mm Z axis - Vertical travel 2,550 mm Y axis - Transversal travel 1,000 mm Hydrostatic support Yes Spindle motor power in S6 kW 42 Max. speed constant power spindle rpm 2,500 Supply voltage Vac 400 Power frequency Hz 50 ISO spindle taper ISO 50 Brushless motors CNC GBR SINUS - To be replaced Total weight 48,500 kg Supplied accessories: - X axis bench with X axis telescopic cover - Double upright complete with ram - Z axis telescopic cover - Conical supports and gibs - N° 2 hydraulic power units - Coolant tank - Cabinet - Mobile operator platform (Z and Y axes independent from the mast) - Hanging arm with CNC - Chip conveyor - Levelers The machine is currently positioned on the ground in our workshops. Location: Northern Italy

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 22500 € : 461.25 € : Doppelsäulenführung : 5200x41x1,3 mm : 20-100 m/min : 460 mm : 460 mm : 650x460 mm : rund 380 mm, quadrat 380 : 590 mm : 0.12 kW : 0.55 kW : 4 kW : 3100 mm : 1000 mm : 1800 mm : 1520 kg blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way material limit shaft height adjustment pressure adjustment coolant pump saw blade security switch gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts€ 3.660,-- hydraulic top clamping from above € 1.160,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2000 mm swing diameter: 2400 mm turning height: 1800 mm x-axis: 2000 mm y-axis: 2000 mm z-axis: 1200 mm ram adjustment: 1200/1500 mm faceplate turning speed range -stepless-: 2,3 - 250 U/min boring spindle drive: 27 kW milling drive motor: 27 kW spindle turning speed - stepless: 0-1200 U/min tool magazin:: 12 fach tool taper: 50 ISO control: Siemens 840 D sl chip conveyor: 2 workpiece weight: 15 t total power requirement: 61/92 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 10 x 10 x 7 m m Machine type: CNC carousel lathe Machining Center - Vertical Rectangular ram head suitable for turning, milling, drilling, drilling and Threading. The machine was overhauled and modernized in 2014 automatic 12-fold tool changer C-axis driven tools • Tappet, hydrostatic bearing completely overhauled • Hyfraukik overhauled • Drives and ball screws renewed •  ...

Used Tetra Pak Filling Machine TBA 19 Slim 200 ml up to 7500 bph Introduction Introduction to the Used Tetra Pak TBA 19 In the bottling industry the Tetra Pak TBA 19 Slim 200 ml 10v garners widespread acclaim for its consistent performance and adaptable nature Technical Specifications This machinery is designed to handle a capacity of 7500 packs per hour notably making it an optimal choice for enterprises Manufactured in 1996 it has accumulated 45739 operational hours and is currently disassembled and securely packaged Additionally the Tetra Pak TBA 19 Slim 200 ml 10v boasts a weight of approximately 58000 kg and requires a thermal load of roughly 45 kW Technically it demands a supply voltage of 400 230 VAC and operates at a frequency of 50 60 Hz Furthermore the recommended main fuse stands at 150 A adjustable meanwhile the control circuit voltage measures 24VDC Cleaning and Maintenance  ...

Aluminum cross-cut saw, aluminum circular saw, aluminum semi-automatic circular saw, cross-cut saw, aluminum metal circular saw, light metal circular saw, metal cutting machine -Manufacturer: KASTO, semi-automatic under-table miter saw machine with roller conveyor -Type: KASTOalu U 14 -Saw blade: Ø 400 mm, 2,800 rpm -Saw feed: Hydropneumatic, infinitely adjustable saw feed with rapid return -Swivel range: 180° infinitely adjustable miter device -Cutting area 90°: 200x80 mm / 125x125 mm / 140 mm -Cutting area 45°: 140x80 mm / 110x110 mm / 130 mm -Coolant device: minimum quantity lubrication system -Drive: 1.8 kW -Clamping device: Two vertical and two horizontal clamping elements -Roller conveyor: 3000/520/H950 mm / 2000/470/H950 mm -Dimension saw: 700/1100/H1370 mm -Total weight: 298 kg

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40500 € : 822.15 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 45900 € : 931.77 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...

SIEMENS SGT400 gas turbine generator, CCGT Model : SGT400 Rated power : 14.3 MWe at ISO condition Voltage : 11KV Frequency : 50Hz Running hour : GT#1 16026 hr ; 100 start ; GT#2 17357 hr ; 108 start

The 5 liter trimix is intended for industrial use for the preparation of gels, creams, ointments requiring dispersion, dissolution, homogenization, deaeration, heat exchange. The Trimix is made up of: A table frame with stainless steel casing A mixer with two pendular coaxial movements: Slow peripheral movement: Motor: Power 0.25 kW Reduction-output speed: 50 to 200 rpm Driven by frequency converter Agitation: Anchor paddle +4 articulated PTFE scrapers Double direction of rotation Slow central movement of counter agitation: Motor: Power 0.25 kW Gearbox - output speed: 80 to 419 RPM Driven by frequency converter Agitation: 3 streamlined three-blade turbines with a diameter of 120 mm A tank bottom foam concentrate type EFC 70 GMS Motor: Power 0.75kW - speed 3000 rpm Output speed: 600 to 3000 rpm Driven by frequency converter Agitation: 70mm diameter narrow slot machined rotor/stator A ta ...

Ransomes - Parts // also Agria Iseki Jacobsen SABO Shibaura Toro Used parts and components available from stock for: 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbit rollers, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., Sabo 1203; 1500; 1502D; RS84 Senior, Shibaura SP1840; CM364, Toro Pro81 etc. ... Complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO Info and offers on request. No sending of package deals or lists.

Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand controls Pneumatic material clamps Minimum Quantity Spraying Device Table can be rotated on both sides with locking points at 45° Roller conveyor and stops on request

used parts and components available from stock for Sabo 1203; 1500 (also new parts!); 1502D; RS84 Senior Ransomes 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbitels, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., , Shibaura SP1840; CM364, Toro Pro81 etc. ... complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO, self-propelled Ransomes MK IV... Info and offers on request. No sending of package deals or lists.

Elec: 380 Volt 50HZ, Heating: Yes, Turbine diameter (mm): 950 mm, Turbine depth (mm): 550mm, Turbine material: stainless steel, Dimensions (mm): 1000x1500mm H 2100mm, Rotations per minute: 9 - 26, Last use: December 2020

DUMOULIN sugar coating turbine for small batches or for development. 2 tanks sold with the machine: 15 and 30kg CIP system Waston Marlow perilstatic pump Sold without its power cabinets, fan and filtration system

Mobile stainless steel coating turbine, Elec: 0.55kW 380V 50Hz, Heating: no, Turbine diameter (mm): 900 , Turbine depth (mm): 600, Turbine material: Stainless steel, Dimensions (mm): 1200 x 900 H 1800

WALTER BRUCKS coating pan Stainless steel With ventilation and electric heating Speed variation Alternating rotation, Elec: 380 Volt 50HZ, Heating: Yes, Turbine diameter (mm): 950 mm, Turbine depth (mm): 550mm, Turbine material: stainless steel, Dimensions (mm): 1000x1500mm H 2100mm, Rotations per minute: 9 - 26 , Last use: December 2020

Pratt & Whitney gas turbine generator Model : FT8 Twin pac Power output : 48 MW Voltage : 11 KV Frequency : 50 Hz

Machine description - (Partial excerpt, further details on request):, - 6 motor spindles 5.5 kW max. speed 8,000 rpm., - Spindle capacity 16mm, Z 50mm stroke;, - 6 carriages X 40mm stroke, - 1 slide for counter operation, 75mm stroke., - Counter spindle with integrated motor 6 kW, - Max. speed 8,000 rpm, 150mm stroke,, - Rotating ejector with HP flushing, - Fanuc 30i numerical control, - Parts disposal and pneumatic, - Slide plastic coated, - Outer distribution belt greater capacity, - Active bar advance device, - Collets type F16 for active, - Bar preferential device, - Various Tension and reduction tubes, - Turning tool holder base (16x16), - Cross drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Front drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Electrical control cabinet, - Oil container 1,100 liters, - Coolant pump 100 l/min., 4 bar, - Paper filter system 5 ...

Key data: 20 mm, 200 mm

Control Fanuc ... 0i - TD Turning diameter ... 20mm Rotation length ... 200mm Spindle speed ... 0-10000/min. Main engine power ... 3.7kW L x W x H ... 1900x1060x1750mm Machine weight... 1700kg 7 axes incl. counter spindle with 9,000 rpm bar feeder LNS Hydrobar Expres 332 The machine is in good condition, possible to test under electricity.

Key data: 500 mm, 400 mm, 400 mm

Very good condition, regularly maintained Control: Heidenhain track control Axles: 3 Vertical and Horizontal Spindle X-axis travel : 500 mm Y-axis travel : 400 mm Z-axis travel: 400 mm Direct displacement measuring system Tool holder: ISO40 Hydromechanical tool clamping. Quill stroke vertical spindle:80 mm Spindle speed: 40-2,000 rpm Coolant basin and pump Chip pan Manual central lubrication Power supply : 380/50 V/Hz Total connection: 6.63 kW Weight approx.: 1900 kg Dimensions LxW approx.: 2360x2170 mm

Key data: 500 mm, 350 mm, 375 mm

Control: MAHO 132 Direct displacement measuring system Vertical and Horizontal Spindle Table dimensions: 254x354 mm X-axis travel : 500 mm Y-axis travel : 350 mm Z-axis travel: 375 mm Tool holder: ISO40 Hydromechanical tool clamping. Quill stroke vertical spindle: 50 mm Spindle speed: 63-4,000 rpm Coolant basin and pump Chip pan Manual central lubrication Power supply : 380/50 V/Hz Total connection: 8 kVA Weight approx.: 1650 kg Machine dimensions LxWxH: 2,050x1,430x1,812 mm

Floor type Boring and Milling M/C PAMA Speedram SR 2000 Year 2012 Condition never installed and never used TECHNICAL DETAILS spindlediameter: 180mm x-travel: 18000mm y-travel: 5000mm table: 18000x3000mm Control: Siemens 840D spindle speed: 4 - 2.500 U/min spindle capacity: 60kW ADDITIONAL INFORMATION Equipment/ Accessories: - Hydrostaticguidefor all axes - Floorplates - Head changingstation including 8 heads plus 18tool positions - coolantsystemKnoll, Operating pressureoutside spindle 5 bar / inside tool 45 bar - chipconveyor - stroke axis X:18000 mm CONDITIONS - FOB - Packing Included  Not Included : - Trainning and Foundation; - The customer must provide the necessary equipment and structure to move the load to assemble the machine. - Machine does not have manufacturer warranty. - Any part or component that needs to be replaced must be purchased  ...

Available two units of this SIAT RECOPACK recovery boiler. This boiler recovers the heat from the exhaust gases of turbines or engines, but it doesn't have burner to produce his own heat. They are disassembled and ready to be load. Power 493kW pressure 12 bar Capacity 5065 l YOM 2009 Model Recopack

Description: Including the tools on the turret with LNS HYDROBAR bar loader serial number: 470,457, control: FANUC OT, toolchanger positions: 8, weight approx.: 1,600 kg, Approx. Onsite Dimension. (l x w x h): 7,100 x 1,600 x 1,800 mm

max. wheel diameter: 80 mm gear width: 44 mm max. module: 5 min. module: Control: SIEMENS 840 C adjustment axis angle shaping sp. - wp table: -0,5 - +0,5 ° stroke range: 250-1.500 DH/min centre distance table/shaping spindle: -15 bis +170 mm max. stroke length: 55 mm max. helix angle: 45 max. tool diameter: 180 mm feeds:: feed rotation axis of workpiece (100 mm wp diam.): mm/min feed rotation axis of work piece (100 mm wp. diam.: 10-15.700 mm/min feed center axis of machine column: 1 - 3.750 mm/min : 23 kw voltage: 400 V operating frequency: 50 Hz control voltage: 24 V DC total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,2 x 2,6 x 2,6 m equipment · stroke positioning adjustment controlled by CNC · stroke length adjustment mechanical-manually · machine is fixed to the ground with specific damping shoes (part of the delivery scope) · oil m ...

Alcolor Vario continuous dampening Impression-cylinder washing device - automatic Ink-roller washing device - automatic Blanket washing device - automatic Plate cylinder - coated Powder sprayer (WEKA AP 110) Impression cylinder - coated Blanket cylinder - coated HydroStar (dampening solution supply) (Compact) Model (0,6 mm) Prinect Press Center Prinect Axis quality control

Containers for sweeping, mowing, watering and washing 2-broom system with individual broom control Mower Just over 600 hours ENGINE Perkins 3-cylinder 4-stroke diesel Displacement 1131 cm³ Power 19.7 kW (27 hp) Torque 70.2 Nm Nominal speed 3000 rpm Water cooling Fuel tank capacity 27 l Hydrostatic drive, infinitely variable speed control, four wheels of the same size Maximum speed 27 km/h Hydraulic service brake on the front axle, acts on all four wheels via the hydrostatic drive, mechanical parking brake on the front axle by means of two drum brakes HYDRAULICS 1st circuit infinitely variable up to 33 l/min 2nd circuit up to 58 l/min Hydraulic oil quantity 19 l Lifting capacity front 500 kg WEIGHT Including driver with 75 kg, depending on tyres and equipment Curb weight 1101 kg Permissible total weight 2000 kg Permissible axle load front 1190 kg / rear 1190 kg Drawba ...

- Prinect OnPress Center - Stream feeder - Alcolor dampening units - Baldwin HydroStar BC 713 EF cooling device - Autoplate - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - Grafix Alphatronic 200 powder spray - Plate punch and bender

John Deere 1505 Series II implement carrier, 4 cyl. diesel engine 31 kw/42hp all-wheel drive, continuously variable hydrostatic drive, differential lock, adjustable steering column, cab with air conditioning (function not tested), comfort driver's seat air suspension, data confirmation DEKRA for ABE available. Equipment: None Optionally available: Schell front sickle mower FSM 3000H (rear discharge) Working width 300 cm (middle 180 cm + sides 60 cm each) Side mowers can be moved up / down by approx. 12 cm, automatic switching on and off of the side mowers when lowered/raised. Height adjustment from approx. 25mm to 110mm Sliding plate under the blade as collision protection 4 support rollers in the mower housings and front in the middle as anti-scalping rollers Extras: 3 casters Identical machine with front mower Fastback Commercial 118 (3 m) for sale as well as other mowing ...

Key data: 115 mm, 245 mm

For sale Schaublin CNC lathe type 110 CNC with Fanuc 0-T control. This CNC lathe is equipped with driven tools. and an LNS Hydrobar bar feeder. The machine is still very accurate, and still energized, subject to prior sale. Main motor power 5.5 kW, maximum speed 6,000 rpm, spindle nose A2-4 F38, 8 positions turret with driven tools, X- and Z-axis movement is 220 x 300 mm, Max. speed driven tools is 6,000 rpm. Available at short notice

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

SINGLE SHAFT SHREDDER, V-rotor width 600 mm. diameter 260 mm, Rotor speed 80 - 125 rpm, Throughput rate 100-150 kg/h depending on material and screen, Drive power 22 kW, Max. number of knives 28 pcs 40 mm., screen size bespoke to project :15 to 40 mm, Hopper 600 x 800 mm, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmiss ...

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on  ...

Unipak horizontal AC generator with two bearings, mounted on baseplate, for steam turbine Manufacturer – Alstom Electric Machines Limited Output – 4800 kVA Voltage and Frequency – 6300 V 50Hz Rated Power Factor – 0.8 lagging Number of Poles – 4 Insulation Class – F Total mass of generator – 18000 Kg Standard to wich the generator is designed and built – IEC34 Enclosure code – IP54 Sound Pressure Level – 85 dB (A) Coolant – Clean fresh water

: neu : ca. 4 Monate ab Auftragse : Türkei : 58300 € : 1171.83 € : Doppelsäulenführung : 6000 x 41 x 1,3 mm : 20 - 100 m/min : 560 mm : 560 mm : 600 x 560 mm : 810 mm : 0.12 kW : 2.2 kW : 5.5 kW : 3250 mm : 2200 mm : 2350 mm : 4500 kg Hydromechanical band tension Continuously variable bandspeed (inverter) Linear guide Feed vice with servo drive with 700 mm stroke or 9.999 mm for multi-stroke Control panel with touchscreen (50 cutting lengths / 30 programs) Planetary gearbox Saw pressure adjustment Band deflection sensor Coolant device Chip brush Optical height adjustment OPTIONEN: Hydraulicupper clamping € 2.300,- Micro cooling unit € 890,- Roller table3 m € 4.440,- Laser cutting line € 560,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...

Description: Serial  , ,Number: 4558175 Working Hours: 31500 Turbine new Laser power: 4,0 kw Working Range: X: 2520 mm Y: 1550 mm Z: 300 mm Table loading capacity: 330 kg , Machine was dismantled by AMADA and now is stored , table length: 2,520 mm, table width: 1,550 mm, laser capacity: 4 kW, weight approx.: 7,700 kg, Approx. Onsite Dimension. (l x w x h): 57,545 x 2,630 x 2,789 mm

SINGLE SHAFT SHREDDERS SPECIAL FOR PLASTIC SCRAPS, form 600 mm to 2.000 mm wide rotor., Adjustable counter-knives, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti-vibration, Machine prepared for discharge by conveyor belt, Bolted and hardened rotor shaft on gear box side (ant ...

Hydropneumatic operation Profile height: 150 mm Max. hole height: 120 mm Resistor stroke: 100 mm Punching stroke: 18 mm Press force: 28 kN at 8 bar Max. profile height: 100 mm Weight: approx. 250 kg