hydro turbine used for sale

For lubrication systems, gears and cooling circuits in rolling mills, turbine systems, power plants, chemical plants, etc. for monitoring volume flows. The volume flow is displayed visually. The built-in limit value contacts can be set to the desired volume flow, for example to switch a pump or machine on or off.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.

Vacuum cleaner motor, suction turbine, wet vacuum cleaner, suction motor -Manufacturer: Ell, suction motor from scrubbing machine Gansow 70 BF 70 -Type: 500W -Voltage: 24V -Number: 1x available -Price per piece -Dimensions: Ø 147/H210 mm -Weight: 2.8 kg/pc.

Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from scrubbing machine Gansow 70 BF 85 / 70 BF 70 -Type: 116598-13 -Voltage: 24V -Number: 3x available -Price per piece -Dimensions: Ø 145/H210 mm -Weight: 2.8 kg/pc.

Step regulator, electronic regulation, control, azimuth adjustment, yaw box -Manufacturer: Bilfinger, portable electric azimuth adjustment for e.g. wind turbines -Type: IBN Box NES -Motor starter: Siemens Sirius Eo3 4 pieces -Circuit breaker: Siemens 5SY4202-7 2 pieces -Individual components: see photos -Quantity: 8x IBN box available -Price per piece -Dimensions: 400/300 / H475 mm -Weight: 14 kg

Hazard lights, night signs, flash lights, day and night signs -Reetec: Control for wind turbine hazard lights -Type: W, red slimline THSLW -Dimensions: 210/255/H70 mm -Weight: 3.5 kg

Hazard lights, night signs, flash lights, day and night signs -Signal lights for: wind turbines -GF lamp: RE-LED 864 (Red) -Housing: aqua signal -Price: per piece -Number: 2 pieces -Dimensions: 380/356/H290 mm -Total weight: 15 kg

Hazard lights, night signs, flash lights, day and night signs -Signal lights for: wind turbines -GF light: RE-LED 865/864 (White/Red) -Housing: aqua signal -Price: per piece -Number: 2 pieces -Dimension: Ø 356/675 mm -Total weight: 17 kg

Control of wind turbines, frequency converters, frequency converters, drive converters, controllers, variable speed drives -KEB: Combivert P6 pitch converter -Mat.No .: KEB 19P6H7G-YRXO -Power: 36 kVA -Input: AC 400/480 V 50/60 Hz/DC > 150 V -Dimensions: 1610/350/H645 mm -Weight: 146 kg

Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -electric heating -Manufacturer: Schniewindt -Type: 97/DF 15 -Power: 15 kW -Connection: DN30 in stainless steel -permissible operating pressure: -centrifugal pump -Manufacturer: Tamel 2.2 kW -Number: 2x systems available -Price: per piece -Dimensions cabinet: 940/740/H1870 mm -Weight: 406 kg

Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -Content: ltr -Connection: 2 inches -permissible operating pressure: 1.5 bar -centrifugal pump -Manufacturer: EBARA type DWC-V500/1.5 -Dimensions cabinet: 650/800/H1350 mm -Weight: 104 kg

Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -Content: ltr -Connection: 2 inches -permissible operating pressure: 1.5 bar -centrifugal pump -Manufacturer: EBARA type DWC-V300/1.1 -Dimensions cabinet: 650/800/H1350 mm -Weight: 104 kg

Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber drier -Voltage: 24V -Number: 36x available -Price per piece -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.

Assortment of tool holders, 9 pieces SCHUNK, EMUGE, GÜHRING 2x Hydro expansion chuck Ø 16 mm SCHUNK 204055 with deep drill Ø 16 mm, length: 215 mm 2x Hydro expansion chuck Ø · 12 mm SCHUNK 204054 with deep drill Ø 12 mm, length: 240 mm 1x Hydro expansion chuck Ø 12 mm SCHUNK 204054 1x Hydro expansion chuck Ø 10 mm SCHUNK 204053 2x collet holder ERC32 EMUGE Type: Softsynchro® 3 with tap M18 x 1.75 1x hydraulic expansion chuck Ø 12 mm GÜHRING GM300, 4399 12.263 with step drill Ø 7 / 12 mm, length: 25 mm mounting type, machine side: HSK-A63, DIN 69893 A Retail sale on request ! used, tested ! Dimensions ( packaging ): 400 x 200 x 70 mm

Mayfran coolant system with Knoll high-pressure pump for internal cooling Scraper Belt Chip Conveyor Mayfran Bar loading magazine 3 m Equipment: 1 x Sawing unit 6 x Feed unit 1 x Turning unit 1 x Grooving Unit 1 x Thread Rolling Unit 16 x Collet SW36 1 x Saw and Turning Bushing SW36 1 x conversion kit of the turning unit up to SW41 1 x Control Pin Turning Station Unit 8 2 x Hydraulic Drill Head 3 x Angle Milling Head

Inv. Num. : 5571 Type: SKJ 63-80 Producer: ČKD Blansko Created: 1978 Parameters: Clamping plate diameter: 6300 mm Max. workpiece height: 5000 mm Max. workpiece weight: 300000 kg Spindle extension: 2800 mm Crossbar movement: 3600 mm Increased feeds: 6-1200 mm/min Working Feed: 0 6-120 mm/min Max. workpiece diameter: 8000 m Clamping diameter: 11500 mm Max. glide travel longitudinal: 4350 mm Milling cutter diameter max.: 400 mm Equipment: Increased feeds 2015: Electrical installation Replacement of measuring carriage and slide Hydrostatic repair and table mounting

Overview This whole brewery, including a complete can filling line, a complete glass filling line, and other extensive brewing equipment was built up in 2015. Most of the equipment is from 2017, is still installed and can be visited. CANNING ROOM Canning line, Wild Goose MCE-250 4-head + accessories, conveyor belts, flow meters, labelling machine, date coder, air compressor,stare parts, etc. CCT tank, 20 HL IFIND CCT tank, 30 HL, Staes   CIP installation CMC-KUHNKE SEAM Scanner + Laptop 1 2020 Labeller, self-adhesive, CDA VIDE /ROOF Glycol tank, pipes, pumps (3), control unit, etc. Kaeser airboxcenter, compressor, airdryer, oil/water seperator, etc. 3x Chillers Cool Tower ICS Cool Energy Small air compressors, pump, storage racks, etc MALT STORAGE Air compressors, storage racks, pipes, etc. MALT GRINDER Complete with all pipes, transportsysteem, blowers, etc. BREWERY Brewhouse Johan Alb ...

WEINIG Rondamat R 912 S/N 912-497, YOC 1995 – Ref.-No. 119130 – fully automatic tool grinding machine • Automatic resharpening of straight planer knives in the cutter head with conventional or hydro clamping • Automatic resharpening of milling cutters in the hydraulic planer head (in front of the chest) • Automatic divider for up to 36 cutting edges • Concentricity tolerance below 0.005 mm • Integrated coolant device • Table feed infinitely variable (forward / return) • Easy operation via membrane keypad and digital displays Specifications • Abrasive mandrel D=50 mm • Planer head diameter min. 80 mm to max. 280 mm • Grinding length max. 260 mm • Table stroke 500 mm • Programmable number of knives from 2 – 36 • Programmable grinding circuits per tool 1-9 • Free-angle infinitely adjustable 15° – 35° • Axis angle max. 15° • Gr ...

Roller conveyor type G with Titan blastwheels max entrance width: 1100 mm max entrace height: 550 mm 4 turbines, each 11 kW working speed: 1,4 gt; 2,4 m/min Total power: 62kW Installed on top of floor, no foundation needed! 65 000€ spare parts inlcuded Length : 15 meter Width : 3 meter Height: 5,35 meter Weight: 20 ton

CNC jig boring machine SIP Hydroptic 6a. Made in Switzerland. Table length 1100 mm Table width 842 mm Longitudinal travel (X-axis) 1000 mm Lateral travel (y-axis) 795 mm Vertical travel (z-axis) 800 mm Table load max. 800 kg Drilling diameter in steel 55 mm Taper in spindle: MT 4 Drilling spindle stroke (Z-axis) 250 mm Hole diameter max. 300 mm Spindle speed: number (steps) 18 from 40 rpm up to 2000 rpm Ribbons: Table: stepless up to 300mm/min Drill spindle slider: number (steps) 6 from 0.04mm/rev up to 0.35mm/rev Fast track: Table: longitudinal 2500 mm / min transverse from 2500 mm / min Distance between columns 1100 mm Distance between spindle and table 900 mm Voltage 50 Hz 3x 380 Volt Spindle motor 4.00 HP Total Power Required 8.0 HP Machine weight approx. 7500 kg Overall dimensions of the machine: Length 3220 mm Width 2335 mm Height ...

This machine is a numerically controlled and cross rail elevating double column type vertical boring and turning mill. Is a machine with two rail heads. One, on the right side is turning head and the other, on the left side is a milling head. The right head is utilized exclusively for turning work and can withstand heavy duty operation, and left performs boring and milling work. After the turning is completed, both heads can be performed without changing the machine set-up. These features, coupled with table indexing and milling feed, assure versatility machining capabilities. The cross rail is guided by the slideways of the two columns. Electro-hydraulic clamping clamping devices assure clamping of the cross rail at the desired position. Highly accurate horizontal straightness is guaranteed by the simple and stabilized method of utilizing the compensation beam inside the cross beam. ...

Roders RXP600 DSH Precision High Speed ​​CNC Milling Center Machining range for horizontal table position: X 500 mm, Y 855 mm, Z 400 mm Distance from spindle nose to table: 515 mm Tool magazine: 28 positions Overall dimensions in transport position: W 2300 × D 2800 × H 2920 mm. Total weight: 10200kg. Spindle Model: FISCHER HSC 40 - high-frequency milling, vector-controlled spindle, FISCHER (Germany) Power: 14 kW, 3000-42.000 rpm Tool holder HSK 40: Maximum tool diameter: 16 mm. Desktop Swivel rotary table with thrust bearings for highest rigidity and accuracy, integrated in the X-axis. A-axis tilt range: +/- 115 degrees. C-axis tilt range: +/- 360 deg. Workpiece weight: 200 kg. T-slot table size 340 × 340mm (ø400) Groove width: 12mm. Distance between grooves: 45 mm. Linear motors: all axes Cooling of the main a ...

Price EXW loaded for free on suitable transport. Very friendly EU transportation cost. Please Details: Jones and Shipman 1310 universal, precision ID/OD grinder, high accuracy, suitable for precision engineering and gauges. We are using it for parts adjustments in our workshop. In very good original condition, from 1st owner (We are the second but we are using only a few hour a week, and keep it clean and tidy) I has almost all accessories, even those are not normally supplied with used or new grinder. See photos please. Jones and Shipman is a high quality, top workmanship, universal, reliable, well designed and done, Easy to operate, precision machine for fine and complex jobs. The machine has universal wheelhead, adjstable to any angles required. The machine is very quiet, has precise semi automatic feed mechanism. Metric machine. We do not know the year of machine but it h ...

RC series centerless grinding machines can be used for infeed grinding and infeed grinding to ensure precision, high productivity in parts with diameter between 1mm and 50mm. Finely hand-scraped hydrodynamic bearings made of steel and phosphor bronze alloy with oil lubrication, firmly maintain the high-precision grinding spindle rotation and rigidity to withstand heavy grinding in the smallest space.

Laser installation YAMAZAKI MAZAK SyperTurbo-X48 Champion, 1,3KW, 2007. Japan. Full set. Documents, disk, flash drive - included. Table size 1250x2500mm, thickness of black metal 12 mm, stainless steel 4 mm. CO2 type total operating time 35,672 hours, inexpensive to maintain, low consumption, cheap turbines in Europe. available consumables for maintenance (share a contact)

Trumpf TruFlow 5000 CO2 Laser Cutting Machine Table size : 1500 mm x 3000 mm Power : 5 kw All maintenance has been done regularly by Trumpf Machine has Lift Master Compact for loading and unloading Chip Conveyor - Closed machine frame with integrated laser unit - Motion unit for high precision processing - Torque drive in combination with direct linear drives - Enclosed beam delivery system - Single cutting head strategy - Chiller - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 5000 - Maintenance-free radial turbine blower - Radio-frequency excitation - Laser control TASC 3 - Laser power control - Logbook function laser Cutting head - Lens cutting head with 250mm focal length - Universal quickchange device for cutting head (UTI) - LensLine with status check -  ...

Hello cause renewal of machine park, we are selling a DARREL brand digital milling table purchased in 2017. The sale is URGENT, because we do not have the space to keep it and therefore have to sell it quickly. Ideal CNC machine for cutting Plexiglas, aluminum composite, wood, PVC, flexible materials 3000x1500mm plate New ELTE 2.2kw spindle (changed 1 month ago) New pads (changed 10 days ago) New variator (changed 10 days ago) 1 month old) In perfect working order, fully serviced. Intuitive software included Clamping flange on the periphery of the plate to block the materials Suction turbine Nose + Chip extractor Dies and cutters provided Demo possible by appointment Price negotiable To pick up in Marseille

Agilent 7890A Gas Chromatograph In perfect state. It is accompanied by all the documentation, installation drivers and a multitude of work accessories (syringe, vials, keys...). Main features: - Operating temperature: 4ºC to 450ºC - Maximum temperature ramp: 120ºC/min - Cooling time: If the ambient temperature is 22ºC it takes 4 min to go from 450ºC to 50ºC - Selectable carrier or drag gas: Hydrogen, Helium, Nitrogen or Argon/Methane - Ambient operating temperature: 15ºC to 35ºC - Height: 49cm - Width: 58cm - Length: 51 cm - Weight: 49 Kg

Temperature control unit, heating, hot water boiler, hydronic system, hydraulic station for high pressure cleaner, high pressure pump -Temperature control units for: water -electric heating for: pressure washer, high pressure pump -Manufacturer: Frigotrol -Type: S-TT 50/108-D -Power: 110 kW -Connection: -permissible operating pressure: 6 bar -Dimensions: 1548/890/H1630 mm -Weight: 380 kg

Operating Tunnel 500 Number of chambers 3 Quantity of rods 63 Number of turbines 2

Max. saw blade diameter: 500 mm Infinitely adjustable hydropneumatic saw blade feed Pneumatic material clamps Weight: approx. 450 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 49000 € : 994.7 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll leng ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27000 € : 548.1 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pellegrini sugar coating turbine Type T150 Non-perforated tank with counter mixing blade Capacity: 205 to 360kg from 4 to 18 rpm Sold with its GRACO spray pump, Heating power: 5160 Kcal/h , Tank capacity in (Kg): 205/360 , Number of revolutions / minute: 4 - 18 , Turbine dimensions (mm): 1150x1540 H 1980

: gebraucht : 2022 : 6209 : prompt, Zwischenverkauf v : Türkei : 12300 € : 1 : 1 : Schwenkrahmen : 4160x34x1,1 mm : 20 - 100 m/min : 330 mm : 320 mm : 450x320 mm : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 240 mm, quadrat 220 : 860 mm : 0.12 kW : 0.37 kW : 2.2 kW : 2230 mm : 880 mm : 1890 mm : 950 kg DEMO MACHINE - MINT CONDITION Double mitre cutting Inverter Saw blade 34 Hydraulic vice Heavy duty gearbox Hydromechanic blade tension Saw band brush Digital read out for mitre angle Coolant equipment Operating manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Public Authority Machine - Prinect Press Center - Axis Control - Suction belt feeder - Alcolor Vario dampening unit - Baldwin HydroStar cooling device - Autoplate - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - Grafix Alphatronic 200 - Dryer HD Variante 2 - High pile delivery X1

: gebraucht : 2022 : 6211 : Türkei : 17900 € : 1 : Schwenkrahmen : 5200x34x1,1 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 250 : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 285 : 860 mm : 0.12 kW : 0.55 kW : 3 kW : 2800 mm : 1210 mm : 1870 mm : 1540 kg DEMO MACHINE - MINT CONDITION hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLI ...

4690 KW Tubetech Air Cooled Condenser ZBW-R-1F-4/1 Condenser from 2018, condenses up to 8 t/h steam, like new, was used as a steam condenser of a 1,500 KW turbine. complete (closed unit with control), 1 available, 4,690 kW, 1 fan. Manufacturer: Tubetech Model No.: ZBW-R-1F-4/1- 6550×2738-DCC63B8-4-1 Serial Number: 1381-1384 Type: Air Cooled Condenser/Steam Condenser Fans: 1 Power [kW]: 4,690 Year of construction: 2018

Size 72 x 102 cm, Prinect Press center XL 3, Alcolor Vario dampening, Technotrans Hydrostar Compact F cooling and recirculation unit, Airstar, Staticstar, Preset Plus feeder, Preset Plus delivery, Autoplate, Antistatic in feeder, Powderspray Powderstar AP 100, Machine has been running only 40-50 gsm paper

GUIDETTI SINCRO 415, Compact cable recycling line, One machine to grind and separate plastic from CU - AL, Low power consumption : Power 15 kw (20,1Hp), Throughput rate 150-200 kg/h (330-440 lbs/h), Including :, - conveyor, - a knife-granulator 3 rot.+2 still knives 450 mm long, rotor dima.450 mm., - a zig-zag separator with dust sleeve, - turbine, - dry separation table, Dimensions: LxWxH 2,3 x 1,5 x 3.15 mm. (90.6 x 59.1 x 124), Total Weight about 1.200 kg, INSTALLED POWER: 15 kw

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th spindle t ...

- Prinect Press Center - Prinect Easy Control - Preset Anleger with pile board - Alcolor Vario dampening units - Technotrans HydroStar Compact F with AlcoControl - Autoplate - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - DryStar Ink IR - PowderStar - StaticStar at feeder and delivery - High pile delivery

max. wheel diameter: 1200 mm gear width: 350 mm max. module: 16 min. module: 0,5 max. workpiece diameter: 1400 mm table diameter: 1200 mm table hole: 300 mm control: Siemens 840D Powerline total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 5x3x3,8 m Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process. Special version with hydraulic shaping head H1 SCOPE OF EQUIPMENT: - Basic machine P1200S, Siemens 840D Powerline (XP) - Hydraulic shaping head H1 - Signal light (3-colour) - Extended software for fault diagnosis - Telephone diagnosis system - Chip disposal through table b ...

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th spindle t ...

Indramat 3 Pulse Thyristor Control Amplifier , Type: TRK 3-WR 109-215-3201 b – 4 TRK 3 3 pcs permanent magnet direct current – servo drives MDC 10.20 2000rpm , 1477 , MDC 10.40 – D / MS – 1 / 50 2 , 1477 , 2000rpm Can also be used as a power generator. Water wheel, wind turbine, ... Three-phase transformer , DTTS , 6KVA, Pr. 3x380V 9,1A, sec. 3 x 220V, 15.7 A Throttle SK D4 Detailed descriptions and electrical plans of the motors and the amplifier ! Items on request

Indramat 3 Pulse Thyristor Control Amplifier , Type: TRK 3-WR 109-215-3201 b – 4 TRK 3 3 pcs permanent magnet direct current – servo drives MDC 10.20 2000rpm , 1477 , MDC 10.40 – D / MS – 1 / 50 2 , 1477 , 2000rpm Can also be used as a power generator. Water wheel, wind turbine, ... Three-phase transformer , DTTS , 6KVA, Pr. 3x380V 9,1A, sec. 3 x 220V, 15.7 A Throttle SK D4 Detailed descriptions and electrical plans of the motors and the amplifier ! Items on request

Indramat 3 Pulse Thyristor Control Amplifier , Type: TRK 3-WR 109-215-3201 b – 4 TRK 3 3 pcs permanent magnet direct current – servo drives MDC 10.20 2000rpm , 1477 , MDC 10.40 – D / MS – 1 / 50 2 , 1477 , 2000rpm Can also be used as a power generator. Water wheel, wind turbine, ... Three-phase transformer , DTTS , 6KVA, Pr. 3x380V 9,1A, sec. 3 x 220V, 15.7 A Throttle SK D4 Detailed descriptions and electrical plans of the motors and the amplifier ! Items on request

– Saw blade 400 mm – Double mitre – 4 pneumatic clamps – Hydrocheck system – Automatic protective cover – Fog lubrication system – 1 roller conveyor 300 cm – 1 roller conveyor 300 cm with length stop – Blowgun –Documentation – 400V

PreviousNext BRAND NEW GABLE TOP FILLING LINE FOR SALE Item #: Usm-195 Category Gable Top Machines Brand New Gable Top Filling Machine, Speed 3000 Pack Per Hour, Filling Volumes 200ml to 1000ml, Year of manufacturing 2023, Pack Type B 70x70, Cold and Hot both Filling Possible, UV Sterile System and Hydrogen Per Oxide Sterile and Alcholic Sterile. Suitable for Milk, juices, Cream and yogurt, Expiry Date Hot Stamping also instaled, Cap feeder, Lifter and Cap Applicator Also installed. Cap Applicator Made by Branson USA. Air Compressor also included, PLC Brand Inovance

Partial excerpt machine description (details on request): 6 motor spindles 5.5 kW max. speed 8,000 rpm. Spindle capacity 16mm, Z 50mm stroke; 6 slides x 40mm stroke 1 carriage for counter operation, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8,000 rpm, 150mm stroke, Rotating ejector with flushing HP Numerical control Fanuc 30i Parts disposal and pneumatic Slide plastic-coated Outer distribution belt larger capacity Active rod preference device Collets type F16 for active Bar preferential device Various clamping and reduction tubes Turning Tool Holder Base (16x16) Transverse drilling unit ratio 2:1 Max. 8,000 rpm - max. 4.4 Nm Front drilling unit ratio 2:1 Max. 8,000 rpm - max. 4.4 Nm Electrical control cabinet Oil tank 1,100 litres Coolant pump 100 l/min., 4 bar Paper filter system 50 μm Fine filter system 5 μm hydrostatic circuit Hy ...