hydraulic used for sale

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm -Dimensions: 650/460/H600 mm -Weight: 60 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Motor Bosch type: 0 136 355 057 -Gear pump type: 1517 222 374 -Voltage: 24 volts -Power: 1.5 kW -Speed: 2500 rpm -Quantity: 1 pumps available -Price per piece -Dimensions: 285/120 / H150 mm -Weight: 11 kg / pc.

pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm -Back height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg

pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm -Back height: 51 mm -Span width: max. 330 mm -Dimensions: 550/200/H125 mm -Weight: 47 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, forklift motor with gear, electric motor, DC motor, traction motor, drive motor -Voltage: 48 volts -Power: 5kW -Speed: 1900 rpm -Drive motor for: lifting work platforms from GSL (German Standard Lift) -Pump: Lamborghini MLPS/BCX/208/F -Number: 3x available -Price per piece -Dimensions: 210/H470 mm -Weight: 42kg

hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulic machine vice -Jaw width: 160 mm -Back height: 55 mm -Clamping depth: max. 250 mm -swiveling -Dimensions: 560/320/H170 mm -Weight: 74 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 63 bar -Liter output: 6 l/min -Hydraulic tank: 40 liters -Dimensions: 690/400/H700 mm -Weight: 100 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor -Motor power: 5.5 kW -Speed: 1435 rpm -Hydraulic pump -Max. Pressure: 60 bar -Liter output: 50 l/min -Dimensions: 720/640/H700 mm -Weight: 145 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Electric motor SIDO type: D160L-84 -Motor power: 7.5/12 kW -Speed: 720/1435 rpm -Hydraulic pump Sperry Vickers type: GC4/40/3/10 -Max. Pressure: bar -Dimensions: 960/400/H520 mm -Weight: 242 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, pot winch, hydraulic winch, Hydralite Jacks -Max. Lifting force: 100 tons -Hydraulic cylinder stroke: 160 mm -Number: 2x cylinders available -Number: 1x cylinder as a spare part carrier (without pump) -Price: complete -Dimensions: 400/240/H370 mm -Weight complete: 104 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Gear pump: for electric forklifts -Bicycle pump type: -with tank and control valve -Drive: 24 V -Dimensions: 285/280/H750 mm -Weight: 38 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -hydraulic voltage defective -is sold as dismanteld -Jaw width: 160 mm -Back height: 53 mm -Span width: max. 170 mm -Height support: 80 mm -Weight: 62 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, Hydraulic unit -Motor: VEM 7.5 kW / 1430 rpm -Individual components: Hydac Hawe Hoerbiger see photos -Dimensions: 860/320/H420 mm -Weight: 97 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Manufacturer: Safan, 2 hydraulic cylinders from press brake type UC 110-3100 -Piston rod: Ø 150 mm -Stroke: 180mm -Piston: with return spring -Add-on parts/directional valves: see photos -Price/tax: complete -Dimensions: 640/225/220 mm/piece -Weight: 270kg/piece

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Manufacturer: HACO, 2 pieces of hydraulic cylinder from press brake type PPES 30135 -Piston rod: Ø 160 mm -Stroke: 130mm -Price/tax: complete -Dimensions: 685/330/300 mm/piece -Weight: 168kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Condition of hydraulic cylinder: unused -Manufacturer: Faroil, hydraulic cylinder double-acting stroke 160 mm -Type: 6 18. -Piston rod: Ø 25 mm -Hole spacing: 322 mm -Quantity: 32x cylinders available -Price per piece -Dimensions: 360/60/H87 mm -Weight: 4.6 kg/pc.

Description: Technical details: Delivery pressure 250 bar, liter output 7.8 l, drive power 0.37 kW, total power requirement 3 kW, additional information: Gear pumps belong to the group of hydraulic pumps. They are used to supply pressure oil to hydraulic consumers in oil-hydraulic systems. The external gear pump type Z is a fixed displacement pump with a closed pump housing. It is available as a single hydraulic pump. Properties and advantages, low noise, self-priming, low pulsation, areas of application, industrial hydraulics, mobile hydraulics, process technology, vehicle construction weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,000 mm

Description: Roll length 3050 mm Roll diameter 210 mm Crunching thickness 4 mm Roll thickness 6 mm Motor power 7.5 kW Rollers driven by independent hydraulic geared motors. Digital indicators to monitor the position of the crunching rollers. Cone setting device for the crunching rollers. Automatic hydraulic synchronisation of roller parallelism. Hydraulic opening head. Heat treatment of cylinders. Hydraulic roller diverter weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,700 x 1,700 x 1,500 mm

pressure:315 t distance between columns:2350 mm distance table/ram, max. stroke up, adjustment up:1200 mm distance between cutting impact cushioning:1600 mm Distance table/ram, stroke up:1200 mm stroke:800 mm table surface area:2060 x 1260 mm table height over floor:750 mm Die cushion pressure in table:100 t Die cushion stroke in table:400 mm die cushion area:1250 x 1000 mm side window:780 mm ram surface:2200 x 1500 mm Capacity of ejector in ram:63 t speed down:500 mm/s speed up:310 / 410 mm/s working speed:20 - 73 mm/s quantity of oil:3900 l power requirement:80,0 + 45,0 kW weight:55,0 t Dimensions (WxDxH):4,6 x 2,7 x 7,2 m Height above floor:6,0 m Height below floor:1,2 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:hydraulic cutting impact absorption:hydraulic

4-column hydraulic press, laboratory press used; Manufacturer: Henry Berry Co. LTD. England; Pressing force: 200 tons; -Table size approx. 1520 x 1680 mm with additional T-slot clamping plate approx. 1200 x 1200 mm; -Punching plate with additional T-slot clamping plate approx. 1200 x 1200 mm -Max. piston stroke approx. 1400 mm; -width between columns approx. 1500 mm; -Hydraulic tank approx. 1000 x 1000 x 1000 mm / approx. 400 litres with power box, filters, hydraulic manifolds and other small parts; -Hydraulic pump with electric motor; -Universal motors 380 V, 50 Hz, 18.5 kW; -(power unit and engine were renewed in 2012); -Size of the press approx. 1700 x 2050 H 5700 mm (+ accessories); -Weight approx. 22-23 t.

Hydraulic C-frame press Tool testing press / straightening press Pressure power hydraulic unit approx. 400kg/cm2 Printing capacity of the press approx. 270to Partially overhauled! Hydraulic cylinder sour overhauled, recoat Table clamping area 1.300x500mm Flat of the printing plate 700x400mm Number of T-slots 2 pcs with width 22mm Piston rod diameter 290mm maximum installation height 750mm Piston path 350mm Extension C-frame to center piston 270mm Extension C-frame to front edge pressure plate 480mm Width C-frame 500mm Aeussere Dimensions Depth 1,800mm Width 1,300mm Rxvukelzy Height approx. 3,000mm Weight approx. 5to Rest according to photos Special price

Hydraulic step feeder to the separation of round timber. With hydraulic arms of allocation. For short logs up to 1.2 m. Including hydraulic power pack. Only 5 years in use; Very good

Sheet thickness: 4,00 mm Folding length: 3200 mm Depth rear gauge: 0 mm CNC Brand: Delem CNC Model: DA 65 MACH-id   5164 MAKE        Fasti Schroder Germany TYPE          215 - 32- 4 YOP            1998 SPECIFICATIONS Control     Delem DA 65 Pressbrake / Folding / Mech. / Hydr.     Folding machine Hydraulic     Hydraulic / Mechanical      Hydraulic Bending length    3200 mm Stroke      350 mm Die height       80 mm Power      7 .5 Kw DIMENSIONS Length       4000 mm Width         3000 mm Height        2000 mm

Capacity: 150 t Folding length: 3100 mm CNC Brand: Delem CNC Model: DA 56 MACH-id     5081 MAKE          Darley Holland TYPE            EHP - L YOP              2000 SPECIFICATIONS Throat      250 mm Controll     Delem DA 56 Pressbrake / Folding / Mech. / Hydr.      Hydraulic Pressbrake Hydraulic / Mechanical        Hydraulic Bending length       3100 mm Distance between column       2500 mm Press force      150 Ton Stroke        175 mm Die height        400 mm Backgauge stroke X in mm       1000 mm Power        14 Kw DIMENSIONS  Length    ...

Capacity: 110 t Folding length: 3100 mm CNC Brand: Delem CNC Model: DA 56 MACH-id    5080 MAKE        Darley Holland TYPE          EHP - L YOP            2000 SPECIFICATIONS Throat      250 mm Controll     Delem DA 56 Pressbrake / Folding / Mech. / Hydr.      Hydraulic Pressbrake Hydraulic / Mechanical         Hydraulic Bending length         3100 mm Distance between column        2500 mm Press force        110 Ton Stroke          150 mm Die height       375 mm Backgauge stroke  X  in mm     1000 mm Power         7.5 Kw DIMENSIONS Length  ...

Capacity: 320 t Folding length: 4500 mm CNC Brand: Cadman CNC Model: B Touch MACH-id   4181 MAKE        LVD Belgium TYPE         PPEB-EFL 320/4500 YEAR        2011 SPECIFICATIONS Controll       Cadman B Touch Pressbrake / Folding / Mech. / Hydr.   Pressbrake      Hydraulic / Mechanical       Hydraulic Bending length      4500 mm Distance between column      3820 mm Press force      320 Ton Throat    600 mm Stroke     500 mm Die height       770 mm Backgauge stroke X in mm   1000 mm Number off controlled axis   6 Power    37 kW DIMENSIONS Length   4500 mm Width     2500 ...

TECHNICAL INFORMATION Manufacturer: DYNASET Name: Hydraulic generator Type: HG 20 Built: 2014 Output power max.: 20 kVA Output voltage: 230 V (1-phase) / 400 V (3-phase) Rated current: 16 A (1-phase) / 28.9 A (3-phase) Power: 15.2 kW Frequency: 50 Hz Flow rate: 95 l/min Maximum pressure: 210 bar SPECIFIC COMMENT - The hydraulic generator uses the hydraulic system of machines, vehicles or ships as an energy source If there is any interest, we are happy to send you an offer with photos. EuroConsult Dimitrios Piretzidis

pressure:500 t passage width:1600 x 1300 mm stroke:1100 mm Table size:1600 x 1300 mm open height:1700 mm Press speed:25,2 - 9,4 mm/sec Approach Speed:300 mm/sec return speed:200 mm/min machine dimensions LxWxH:2800 x 1800 x 7200 mm Weight (approx.):55 t Description of the press frame The frame is designed as a frame construction with 2 operating sides. It consists of highly dimensioned braces, which are tightly and rigidly welded with upright steel ribs. The complete welding part is processed on precision machines. As a stiff box construction. The underside of the box is formed by a solid welded steel plate, which is prepared for the assembly of insulation and heating plates. The complete welding part is processed on precision machines. Integrated guide and cylinder connections in a power optimised design. Plunger Guide The plunger is guided diagonally through a prism guide, i.e. the ang ...

Single column - hydraulic press MAE type S63SZ SO Masch.Nr. 551277 Year of construction approx. 1977 Compressive force 63 ton. Projection 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Installation height max. approx. 730 mm Table height above corridor 970 mm Tank capacity Hydraulic 600 litres Drive power 15 kW Mains connection 380 Volt, 50 Hz - Hydraulic die cushion under the table with holes through the table top - 2-hand operation - Electric control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 ton. The machine is working, the control cabinet is mechanically damaged. During the test run, the machine reaches a pressing force of 50 tons, presumably a pressure relief valve flows off.; used

sheet width: 2100 mm plate thickness: 6,0 mm ST 42 thickness at Niro-steel: 4,0 mm VA cutting angle: 1,2 Grad no. of strokes: 28 Hub/min oil volume: 150 ltr. down holder: 11 Stück control: CYBELEC CybTouch engine output: 11,0 kW back stop - adjustable: 1.000 mm table height: 800 mm weight: 4.500 kg range L-W-H: 3.010 x 2.100 x 1.640 mm ------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6,3 To. range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for ...

sheet width: 3100 mm plate thickness: 6,0 mm distance between columns: 3100 mm down holder: 14 Stück no. of strokes: 18 Hub/min oil volume: 150 ltr. cutting angle: 1,2 ° thickness at Niro-steel: 4,0 mm control: CYBELEC CybTouch weight: 6300 kg range L-W-H: 4.000 x 2.100 x 1.640 mm -------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for longer  ...

Key data: 63 t

EUROMET Y41-63T hydraulic press manufactured in 2007 is designed for machining metal sheets, sections and profiles. EUROMET Y41 63T hydraulic press has a monolithic structure resistant to any deformations, which, combined with the 63-ton press force, allows to achieve excellent precision and quality of machining both in medium and large series production. Technical parameters of EUROMET Y41-63T hydraulic press - maximum press force: 63 t - work table dimensions (L x W): 580 x 560 mm - piston rod speed (pressure): 10 mm/s - piston rod speed (return): 95 mm/s - piston rod speed (no load): 38 mm/s - piston rod stroke: 500 mm - maximum piston rod feed: 800 mm - power: 7.5 kW

Hydraulic press 80 t of stable design and high press force was manufactured in 2021. The hydraulic vulcanising press enables efficient processing of rubber and thermosetting plastics in manual or automatic mode. Excellent parameters and two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm make the hydraulic vulcanisation press for rubber ensure high efficiency of 48 tons per month during three-shift operation. Technical specifications of the rubber press - press force: 80 t - heating plate dimensions (L x W): 1200 x 1200 mm - electric heating - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operation modes: manual or automatic - full technical documentation - CE certificate

Hydraulic vulcanising press 80 t built in 2021 is distinguished by its stable construction and high press force. The hydraulic vulcanisation press for rubber is designed for the efficient processing of rubber and other thermosetting plastics using two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm. The hydraulic press achieves a capacity of 48 tonnes per month when operating in a three-shift system. Technical specifications of the rubber press - maximum press force: 80 t - electric heating - heating plate dimensions (L x W): 1200 x 1200 mm - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operating mode: manual or automatic - full technical documentation - CE certificate

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 Hub/min oil volume: 310 ltr. cutting angle: 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 12200 kg range L-W-H: ca. 4100 x 2300 x 2235 mm -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 14 Stück no. of strokes: 13 Hub/min oil volume: 260 ltr. cutting angle: 2,0 ° throat: 350 mm engine output: 22,0 kW back stop - adjustable: 1.000 mm weight: 10.575 kg. range L-W-H: 4,05 x 2,5 x 2,17 m -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trav ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 14 Stück no. of strokes: 13 Hub/min oil volume: 260 ltr. cutting angle: 2,0 ° throat: 350 mm engine output: 22,0 kW back stop - adjustable: 1.000 mm weight: 10.575 kg. range L-W-H: 4,05 x 2,5 x 2,17 m -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trav ...

Description: Hydraulic pump generating a pressure force of 10 tons, intended for hydraulic spreaders or small presses. Hydraulic hose 140 cm long Approx. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 5 kg

Description: Hydraulic pump generating a pressure force of 10 tons, intended for hydraulic spreaders or small presses. Hydraulic hose 140 cm long Approx. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 5 kg

Description: Hydraulic pump generating a pressure force of 10 tons, intended for hydraulic spreaders or small presses. Hydraulic hose 140 cm long Approx. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 5 kg

Maker: SUMITOMO HEAVY INDUSTRIES (made in Japan) Model: FPA-3000 Year: 1985 (2) Capacity & main specification 1) Capacity: 3000tf 2) Ability Limit Point: 5mm 3) Allowable eccentric load: 3000tf 4) Allowable eccentric distance: L&R 350mm 5) Slide stroke: 350mm 6) Slide stroke speed: 20~50spm 7) Stroke number: 20tpm(Max) 8) Shut height: 1200mm 9) Slide adjust distance: 10mm 10) Bed hard plate dimensions: RL 1300mm x FB 1500mm 11) Slide dimensions: RL 1200mm x FB 1400mm 12) Slide knockout capacity: Total 20tf (pin number: 4ea) 13) SKO stroke: 50mm ( adjust up) 40mm ( adjust down) 14) Bottom knockout capacity: 50tf (pin number 4ea) 15) BKO stroke: 20~30mm 16) Upright internal dimensions: RL 1400mm 17) Main motor: DC 200kw x 1450rpm 440V 18) Floor height: 6800mm 19) Working height: 1030mm 20) Side opening: FB 1000mm x TB 1400mm 21) Flywheel energy: 200tf-m (50spm)  ...

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Hydraulic hydraulic filter changer. Diameter: 220 mm. Motor: 4 Kw. With head of 43 threads (spaghetti). Hydraulic group with accumulator and electrical panel.

1 piece hydraulic radiator with electric motor, 2 pieces hydraulic pump and filter for sale. To be delivered completely on pallet. Other hydraulic components available.

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 20 mm -universally applicable -Number: 20x motors available -Price: per piece -Dimensions: 245/125 mm -Weight: 14 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 6x motors available -Price: per piece -Dimensions: 240/175 mm -Weight: 14 kg/piece

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: approx. 150 bar -Liter output: approx. 6 l/min -Drive: 0.6 kW 1380 rpm -Dimensions: 410/250/H340 mm -Weight: 22 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 45 mm -Pipe Ø outside: mm -Stroke: 250 mm -Total length retracted: 460 mm -Recording hole: Ø 40 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 22.5 kg/piece