hydraulic used for sale

Key data: 2540 mm, 6 mm

Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Motorized adjustable back gauge (2 speeds) up to 1000 mm with display Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 5500 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Rexroth Hydronorma, hydraulic unit from Krauss HS 50 injection molding machine -Pump: Type 1PV2V-16/50RA01 MC160A -Motor: Bauknecht 7.5 kW / 1440 rpm -Individual components: see images -Dimensions: 790/340/H400 mm -Weight: 133 kg

Key data: 3 mm, 10 mm, 1 mm

Guillotine shears from a company liquidation Worked as a cutting center with automatic stacking device make Theis Control cabinet , built in 2015 new Front support arms 1,000 mm Service regularly performed according to plan 3,000 x 10 mm

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: AEG, hydraulic unit from Krauss Maffei KM 250-1200 B injection molding machine -Motor: Bauknecht type AJ 225 MV4 Q4 55 kW / 1460 rpm -Individual components: see images -Dimensions: 1340/650/H760 mm -Weight: 557 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 80 mm -Stroke: 195 mm -Total length retracted, center to center of hole: 425 mm -Piston rod mounting: Ø 30 mm -Cylinder mounting: Ø 30 mm -Universally applicable: -Quantity: 1 piece available -Dimensions: 495/125/H100 mm -Weight: 20 kg

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: ORSTA -double pump -Pump 1: type A16R -Pump 2: type C16-3R -Drive: VEM type KMR132M4 -Power: 11 kW 1440 rpm -with clutch bell -Number: 3x hydraulic pumps available -Price: per piece -Dimensions: 830/285/H335 mm -Weight: 105 kg

Key data: 200 t, 80 mm

Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 100 mm -Piston rod: Ø 60 mm -Stroke: 250 mm -Total length retracted center center hole: 690 mm -Piston rod holder: Ø M48 mm -Cylinder holder: Ø 60 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 750/250/H160 mm -Weight: 52 kg/piece

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Hydraulic pump for pedestrian stacker make: Climax Handling -Gear pump for: electric forklifts -Bicycle pump type: -with: tank and control valve -Drive: 24 V -Dimensions: 320/105/H295 mm -Weight: 12 kg

Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Hydraulic pump comes: from an injection molding machine -Manufacturer: Battenfeld -double pump -Manufacturer: Flutec -Pump type: PT-350/2.3/N -Drive ABB motor type: MBT160L -Power: 15 kW 1455 rpm -with: clutch bell -with: Bosch hydraulic valves -Dimensions: 1070/630/H500 mm -Weight: 232 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: 500/510/H670 mm -Pump max. Pressure: 30 bar -Pump max. Liter output: l/min -1x drive: 0.75 kW 1380 rpm -Hydraulic filter -Hydraulic tank -Control valve -Dimensions: 500/510/H670 mm -Weight: 88 kg

Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Restoring force: 120 N -Power: 0.15 kW -Stroke: 50 mm -Dimensions: 417/150/H190 mm -Weight: 9 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 40 mm -Piston rod: Ø 40 mm -Pipe outer diameter: 55 mm -Stroke: 500 mm -Total length retracted: mm -Hole diameter: 30 mm -Piston rod mount: Ø 44 mm ball head -Ideal for building a hydraulic press -Quantity: 50x available -Price: per piece -Weight: 12.5 kg/piece

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Electromechanical actuator for valves, valve drive, actuator, servomotor -Valve drive, continuous control signal, position feedback -Type: Siemens SKC60 -steady input signal -Maintenance-free electro-hydraulics -Hand adjustment and position indicator Technical specifications: -Runtime (control mode): open 120 s, close 20 s -Nominal stroke: 40 mm -Adjusting force: 2800 N -Operating voltage: AC 24 V -Power consumption: 24 VA/18 W -Control type: DC 0...10 V, DC 4...20 mA, 0...100 Ohm -Weight 10 kg -Number: 1 pieces available -Price: per piece

Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. insertion height: 295 mm -Max. width: 300 mm -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, forklift motor with gear, electric motor, DC motor, traction motor, drive motor -Voltage: 48 volts -Power: 5kW -Speed: 1900 rpm -Drive motor for: lifting work platforms from GSL (German Standard Lift) -Pump: Lamborghini MLPS/BCX/208/F -Number: 3x available -Price per piece -Dimensions: 210/H470 mm -Weight: 42kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: double-acting stroke 125 mm -Type: H21095Ø40x28x125 -Piston diameter: 40 mm -Piston rod: Ø 28 mm / M16x1.5 -Hole: Ø 18 mm -Number: 2x hydraulic cylinders available -Price: per piece -Dimensions: Ø 85 x 425 mm -Weight: 8.7 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 110 mm -Piston rod: Ø 60 mm -Cylinder tube outer diameter: Ø 115 mm -Stroke: 1200 mm -Total length retracted, center to center of hole: 1465 mm -Piston rod mounting: Ø 30 mm -Cylinder mounting: Ø 30 mm - Universally applicable: -Number: 2 cylinders available - Price: per piece -Dimensions: 1530/115/H130 mm -Weight: 62 kg/piece

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Function: double-acting -Piston diameter: approx. 60 mm -Piston rod: Ø 50 mm -Cylinder tube outside: Ø 80 mm -Stroke: 1200 mm -Total length retracted center hole: 1460 mm -Piston rod mount: Ø 30 mm -Cylinder mount: Ø 30 mm -universally applicable: -Number: 2x cylinders available (1x without eye) -Price: per piece -Dimensions: 1530/100/H80 mm -Weight: 36 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 60 mm -Piston rod: Ø 50 mm -Cylinder tube outer diameter: 80 mm -Stroke: 800 mm -Total length retracted, center to center of hole: 1280 mm -Piston rod mounting: Ø 30 mm -Cylinder mounting: Ø 30 mm - Universally applicable: -Number: 16 cylinders available -Price: per piece -Dimensions: 1350/80/H100 mm -Weight: 33 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: Hydraulic cylinder from Mengele press brake -Equipment: with threaded stop for depth limitation -Piston diameter: approx. 240 mm -Piston rod: Ø 200 mm -Stroke: approx. 380 mm -Piston rod mounting: 212 x 212 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 840/410/H355 mm -Weight: 430 kg/piece -Weight: 430 kg/piece

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: B1A8E -Pump max. Pressure: 80 bar -Pump max. Liter output: 12 l/min -1x drive: 1.1 kW 1400 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 500/410/H670 mm -Weight: 100 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit with: 2x motors and oil cooler -2x hydraulic pumps: from Truninger type QT23-005/22-005 -per pump max. Pressure: 320 bar -per pump max. Liter output: 7.9 l/min (5 cm³/U) -1x drive: 11 kW 1460 rpm -1x drive: 5.5 kW 1460 rpm -Hydraulic filter -Hydraulic tank -Oil cooler with: fan -Dimensions: 1500/1100/H1900 mm -Weight: 845 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, pot winch, hydraulic winch, Hydralite Jacks -Max. lifting capacity: 100 tons -Hydraulic cylinder stroke: 160 mm -Number: 2 cylinders available -Quantity: 1x cylinder as spare parts carrier (without pump) -Price/Sale: complete -Dimensions: 400/240/H370 mm -Total weight: 104 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 40 mm -Piston rod: Ø 25 mm -Stroke: 465 mm -Total length retracted center center hole: 910 mm -Piston rod holder: Ø 20 mm -Cylinder holder: Ø 20 mm -universal: applicable -Number: 1x cylinder available -Price: per piece -Dimensions: 950/100/H75 mm -Weight: 12 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting cylinder -Piston diameter: approx. 40 mm -Piston rod: Ø 35 mm -Stroke: 980 mm -Cylinder comes from a Still forklift mast -universal: applicable -Number: 2x cylinders available -Price: per piece -Dimensions: 1140/85/H60 mm -Weight: 14 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic connections: via the piston rod -Piston diameter: approx. 75 mm -Piston rod: Ø 50 mm -Stroke: 790 mm -Total length retracted center center hole: 1130 mm -Piston rod holder: Ø 32 mm -Admission cylinder: Ø 32 mm -universal: applicable -Number: 1x cylinder available -Price: per piece -Dimensions: 1250/120/H115 mm -Weight: 42 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic connections: via the piston rod -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 850 mm -Total length retracted center center hole: 1170 mm -Piston rod holder: Ø 38 mm -Cylinder holder: Ø 38 mm -universal: applicable -Number: 1x cylinder available -Price: per piece -Dimensions: 1240/180/H110 mm -Weight: 53 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 95 mm -Piston rod: Ø 63 mm -Stroke: 990 mm -Total length retracted, center to center of hole: 1370 mm -Piston rod mounting: Ø 37 mm -Cylinder mounting: Ø 60 mm -universally applicable: can be used -Quantity: 1 cylinder available -Dimensions: 1470/295/H140 mm -Weight: 75 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic connections: via the piston rod -Piston diameter: approx. 60 mm -Piston rod: Ø 40 mm -Stroke: 950 mm -Total length retracted center center hole: 1250 mm -Piston rod holder: Ø 25 mm -Cylinder holder: Ø 25 mm -universal: applicable -Number: 1x cylinder available -Price: per piece -Dimensions: 1300/180/H150 mm -Weight: 33 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting cylinder -Piston diameter: approx. 80 mm -Piston rod: Ø 80 mm -Stroke: 1120 mm -Cylinder comes from a Still forklift mast -universal: applicable -Number: 1x cylinder available -Price: per piece -Dimensions: 1470/450/H125 mm -Weight: 104 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Design: Single-acting -Piston diameter: approx. 165 mm -Piston rod: Ø 140 mm -Stroke: 1000 mm -Total length retracted center hole: 1670 mm -Piston rod mount: Ø 80 mm -Cylinder mount: Ø 80 mm -Number: 1x cylinder available -Dimensions: 1850/270/H220 mm -Weight: 318 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 130 mm -Piston rod: Ø 65 mm -Stroke: 850 mm -Total length retracted, center to center of hole: 1850 mm -Piston rod mounting: Ø 70 mm -Cylinder mounting: Ø 70 mm -Ideal for building a hydraulic press -universally applicable: can be used -Quantity: 1 cylinder available -Dimensions: 2080/230/H300 mm -Weight: 216 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 160 mm -Function: double-acting -Piston tube outer diameter: 190 mm -Piston rod: Ø 100 mm -Stroke: 730 mm -Total length when retracted, center of mount to center of hole: 430 mm -Piston rod mounting: Ø 100 mm -Cylinder mounting: Ø 110 mm -Thread for screw-in fitting: G3/4 -Hydraulic fitting: 20S -universally applicable: can be used -Number: 2 cylinders available -Price: per piece -Dimensions: 1530/430/H270 mm -Weight: 250 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Motor: unused -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 60 mm -universal: applicable -Number: 3x motors available -Price: per piece -Dimensions: 340/145/H145 mm -Weight: 20 kg

Hydraulic motor, oil motor, hydraulic pump -Motor: unused -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 62 mm -universal: applicable -Number: 1x motors available -Price: per piece -Dimensions: 360/150/H150 mm -Weight: 23 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Ideal for building demolition shears, scrap shears, and branch shears -Connections via the piston rod -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm -Stroke: approx. 420 mm -Total length extended: 1800 mm -Ideal for machines where the piston rod needs to be protected. -Quantity: 6 pieces available -Price: per piece

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 40 bar -Liter output: 11 +4 l/min -Hydraulic tank: 450/320/H320 mm -Motor: 1.5 kW 1410 rpm -Hydraulic valve -Pressure relief valve -pressure clock -Price: per piece -Number: 3x available -Dimensions: 600/1000/H850 mm -Weight: 220 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: approx. Ø 90 mm -Piston rod: Ø 60 mm -Pipe outer diameter: 120 mm -Stroke: 940 mm -Total length when retracted: 1510 mm -Piston tube mounting: Ø 25 mm -Piston rod mounting: Ø 35 mm -Ideal for building a hydraulic press -Quantity: 1 piece available -Weight: 80 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 180 mm -Piston rod: Ø 125 mm -Pipe outer diameter: 210 mm -Stroke: approx. 350 mm -Pressure force at 180 bar: approx. 45 tons -Total length when retracted: 860 mm -Hole diameter: Ø 65 mm -Ideal for building a hydraulic press -Number: 2 cylinders available -Price: per piece -Dimensions: 200/280/H860 mm -Weight: 150 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Stamp: for Herrenknecht tunneling -Piston diameter: approx. 140 mm -Piston rod: Ø 115 mm -Stroke: 310 mm -Max. Stamp pressure: 500 bar -universal: applicable -Number: 3x cylinders available -Price: per piece -Dimensions: 168/200/H550 mm -Weight: 82 kg/piece

Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servomotor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive -Power: 0.2 kW -Adjusting force: 500 N stroke: 100 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 500/180/H215 mm -Weight: 15 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 50 mm -Pipe Ø outside: mm -Stroke: 385 mm -Total length retracted: 680 mm -Hole diameter: 40 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 40 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 50 mm -Piston rod: Ø 30 mm -Pipe outer diameter: mm -Stroke: 470 mm -Total length when retracted: 615 mm -Ideal for building a hydraulic press -Quantity: 1 available -Price: per piece -Weight: 7 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 50 mm -Pipe Ø outside: mm -Stroke: 300 mm -Total length retracted: 480 mm -Recording hole: Ø 40 mm -Ideal for building a hydraulic press -Number: 11x available -Price: per piece -Weight: 40 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 50 mm -Pipe Ø outside: mm -Stroke: 400 mm -Total length retracted: 60 mm -Recording hole: Ø 50 mm -Ideal for building a hydraulic press -Number: 15x available -Price: per piece -Weight: 23.5 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 50 mm -Pipe Ø outside: mm -Stroke: 400 mm -Total length retracted: 620 mm -Recording hole: Ø 50 mm -Ideal for building a hydraulic press -Number: 8x available -Price: per piece -Weight: 35 kg/piece