hydraulic used for sale

SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control

HAWE Hydraulic Piston Pump,

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Wight approx. kg: 1400, Year :1996

Manufacturer: Trepel Hebebühne, Type: EH40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Year :1996

Was installed in a Husky injection moulding machine

Hydraulic gripper for wooden beams with modular suction cups Load capacity kg: 700 Number of suction cups: 16 Dimensions of suction plate mm: 80 x 750 Procedure mm: 8000

Was installed in a Husky injection moulding machine

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,

Manufacturer: Hydraulikhubtisch, Lifting power kg: 1000, Length mm: 1000, Width mm: 600,

Manufacturer: Unbekannt, Year: ca.1995, Lifting power kg: 1000, Length mm: 2000, Width mm: 1000, Lifting hight approx. mm: ca.1500, Total hight mm: 250, Safety strip: yes, built-on roller conveyor: yes, Year :ca.1995

Scissor knife for table scissors . Shear knife. Knives.

overhauled Rexroth double pump for Krauss Maffei SGM machines

Hydraulic Pump available for sale. Make: Hydrostar Type: SPV9M Serial Number: 2903900/R PN: 12.5 Vgn: 147.6 Nn: 1450 Made in Poland

HYDRAULIC PUMPS - 3Nos MAKE: KAWASAKI HEAVY Ind. JAPAN TYPE: BZ732S215LH REGISTERED TYPE: R3041L-2SOL

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...

Hydraulic sheet metal shears in backdrop cutting design with NC - controlled rear stop - manual cutting angle adjustment and hydraulic cutting gap adjustment, maximum cutting length 3,020 mm, maximum cutting capacity 8 mm steel sheet/ST40, cutting angle 0.5° to 2° NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections deeper than 1,000 mm - optionally available with a foldable sheet metal support at the rear stop or a conveyor belt with high-stop strips, drive power 11.5 kW, dimensions 3.6 x 1.2 m, weight approx. 7,600 kg

MAKE:FUKUSHIMA LTD. TYPE:MGA-8B MAX WORKING PR. YEAR:1979 WEIGHT:1150 MFG NO.:29760 JAPAN E SEI NO.

Hagglunds MK64 11100 AO RN 0100 Hydraulic Motor available for Sale. Make: Hagglunds Type: MK64 11100 AO RN 0100 IMDIVID NO:611 46 32666/611 56 32651/611 56 32647/611 46 32650 Displecement: 11030Cm³/R Torque: 176NM/BOR Max Press:320Bar Rated Speed: 70R/Unit Max Speed:120R/Unit Max Speed Running: 600R/Unit

MAKE:MACGREGOR HAGGLUNDS ART NO:388 3127-801 SERIAL NO:1994480667 SUPPLIER:100658 DATE:9450

Key data: 3 t, 150 mm

For sale in new condition HYUNDAE CETTA HHP-3 hydraulic press "more pieces" manufacturer: HYUNDAE "Korea" type: HHP-3 year of manufacture: 2018 load range: 1-3 tons Stroke [mm] 150 open height: 250 mm -safety light gate -two-handed operation .-mobile work table Hyundae press control Pressing rod closing speed: 178mm/sec Pressing rod pressing speed: 54mm/sec Opening speed 79 mm/s Table size: 450x360mm Max. Working pressure: 60kg·f/㎠ Hydraulic motor 1,5 kW 3 phase/4P 200v Weight: 350kg machine height "without table": 1415mm machine length: 950mm machine width: ca 700mm working table with casters or level bolts

Parker,Denison P7P Hydraulic Pump available for Sale. Make: Parker,Denison Model No.: P7P3R1A5A2BOOXM204381 Code No.: 023-04381-0 Serial No.: 002042465;002045084 Macgregor Article No.:1875241-801 U.S.A.

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HLS MACH. NO.:HLS 6690 / 6691/ 6685 DATE:Jan-77 RATED TORQUE:2300 K.G.M. 16636 LBS-FT

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKA MACH.NO.:HKA 7942 DATE:Jan-77 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

Double-acting hydraulic cylinder, CK-80/56x0800-L004-H-B1X, Atos, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical information: - Double-acting hydraulic cylinder with swivel eye - Specially manufactured for Frech/Weingarten die casting machines - Suitable for GDK 2000 to GDK 4100 machines - Frech item number 949390 - Piston diameter 80 mm, piston rod diameter 56 mm - Max. stroke 800 mm, piston rod thread M27 x 2 - Centre of swivel eye to retracted piston rod face 510 mm - Swivel eye d40 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...

DIEFFENBACHER PO-F 1250 A hydraulic press was built in Germany in 1981 by J. Dieffenbacher GmbH & Co. The machine was regularly maintained and upgraded throughout its service life. In 2016, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The piston seals were also replaced and measuring scales were added for precise position measurement of the slider, top ejector and lower die cushion. The DIEFFENBACHER PO-F 1250 A is an extremely versatile hydraulic press for demanding metal forming applications. Its main purpose is die stamping of steel components, calibration of forgings, dogging, hot and cold forging, cold forming and other operations that require very high press forces. All these machining processes are performed with a high press force of up to 1250 tonn ...

MAKE:ISHIKAWAJIMA - HARIMA TYPE:HKS MACH. NO.:HKS 6776 DATE:Dec-75 RATED TORQUE:1500 K.G.M. 10850 LBS-FT

MAKE:FUKUSHIMA LTD. TYPE:MGA-8B MAX WORKING PR. DATE OF MFG:1979 WEIGHT:1150 MFG NO.:29760 JAPAN E SEI NO.

MAKE:FUKUSHIMA LTD. TYPE:MA10B MAX WORKING PR.:30 MFG NO.:29801 DATE OF MFG:1979 WEIGHT:1800 KG FUKOSHIMA LTD. JAPAN T SAITO

DIEFFENBACHER PO 500A hydraulic press was built in 1978 in Germany by J. Dieffenbacher GmbH & Co. The machine has been regularly maintained and upgraded throughout its service life. In 2017, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The seals and electrical system were also replaced. The DIEFFENBACHER PO 500A is the perfect choice for even the most demanding metal forming operations. It enables the execution of such operations as die stamping, punching, calibration of forgings and hot and cold bending. All these machining processes are performed with a high press force of up to 500 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The machine is also characterised by a rigid body made of thick steel plates and a ...

MAKE:FUKUSHIMA LTD. TYPE:MA10C MFG NO.:29807 Max. Working Pressure:30kg/cm2 WEIGHT:1800 KG FUKOSHIMA LTD. JAPAN T SAITO

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed -Spindle bent: vice does not open -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg

Hydraulic pump set Sauer-Sundstrand Model Code MPV 035D AABDDLA Type BAGRSGAA FFDNNN Model No. 4352025 A98-44-29352 with flanged gear pump made in UK

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 50 mm -Tube: Ø outside mm -Stroke: 290 mm -Total length: retracted 607 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 607/145/220 mm -Weight: 37 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas HDMF 50/36x550 -Type: HDMF 50/36x550/VORM HS 3750 -Stroke: 550 mm -Piston rod: Ø 36 mm/M22 x 1.5 -Total length retracted: 805 mm -Dimension: 805/160/H160 mm -Weight: 22.3 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1340SF50VASF5090 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 58 x 1360 mm -Weight: 5.3 kg

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeum ...

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240T -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1380 mm -Weight: 5.0 kg

closing pressure: 4360 kN table-size: 730 x 730 mm control: B+R Industrieelektronik draw back pressure: 190 kN ajustment speed: max. 60 mm/sec return speed: max. 90 mm/sec daylight between the columns: 900 mm = vulcanizing press with vertical closing unit, with form removal and form separation device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t stroke: 300 mm table surface area: 1200 x 700 mm ram surface: 1200 x 700 mm dayligth: 500 mm adjustment of stroke: 300 mm return capacity: 348 kN capacity of ejector: 100 kN ejector stroke: 100 mm total power requirement: 65 kW weight of the machine ca.: 28 t dimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m = Frame press Accessories: tool changing table - next safety inspection according to stamp 05/2021 - - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: stroke 88 mm -Piston rod: Ø 32 mm -Mounting holes: Ø25 x 23 mm / Ø32 x 45 mm -Cylinder: outer Ø 118 mm -Dimensions: 455/160/H120 mm -Weight: 15.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 185 mm -Piston rod: Ø 20 mm / thread Ø20 x 178 mm -Cylinder: outside Ø 65 mm -Dimensions: 470/110/65 mm -Weight: 4.4 kg

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t distance between columns: 0 mm stroke: 160 mm table surface area: 630 x 500 mm dayligth: 400 mm total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Orsta, universal unit -Motor: 1.1 kW/1410 rpm -Nominal pressure: 63 bar -Liter output: 6.3 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 380/750/H640 mm -Weight: 72 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg