hydraulic used for sale

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 250 mm -Piston rod: Ø 25 mm -Hole: Ø 25/19 mm -Pitch spacing: retracted 465 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 530/60/H73 mm -Weight: 5.9 kg/pc.

Hydraulic Full Clamping Cylinder RÖHM OVS 85 ( OVS85 ) p: 75 bar n: 8000 rpm piston stroke: 32 mm piston rod diameter: Ø 30 mm New ! Dimensions: 340 x 210 x 120 mm

Refer to code 1130 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Hydraulic manifold block, hydraulic fitting, hydraulic T-manifold, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Configuration: 7x shut-off valve with hose -Pressure: up to 350 bar -Dimensions: 1085/660/H140 mm -Weight: 28 kg

Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg

Hydraulic Testing Press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 pressure max: 200 kN stroke: max approx. 200 mm (at the moment limited by measuring probe and limit switch) largest height: 400 mm table: 340 x 340 mm 380 V Dimensions: 1300 x 840 x 2050 mm

Rexroth D-89275 Elchingen TYP: A4VG125DA2DA/32R-NTF02F071DP MNR: R902198125 SN: 93991682 FD: 23W03 n=2300min P=94,0 kw Made in Germany

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 24 mm -Piston tube outer diameter: Ø 86 mm -Stroke: 290 mm -Number: 2 cylinders available Price: per piece -Weight per piece: 12 kg

Hydraulik shear OMAG CE204 - 2050 x 4-5 mm, Information about technical data are not binding., Machine available subject to prior sale., Cutting lenght: 2050 mm, Cutting thick: 4-5 mm, Throath depth: 200 mm, Backgauge travel: 600 mm, Main motor power: 4 Kw, Approx net weight: 3.100 Kg, Accessories: Manual back gauge

Refer to code 1174 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg

Offer 24559 Specifications: - max. working width 1100 mm - max. cutting capacity - at 400 N/m² strength 20 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 7 pcs - Manual backgauge 10 - 1000 mm - Front angle stop - Front support arms - Stroke rate 13 rpm - Drive 400 V / 45 kW - Table height 700 mm - Space required including back gauge, without front support arm -ca. W 2100 x H 2250 x D 2250 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

2011 HACO HSLX 6008 Hydraulic Shearing Machine Technical Condition: operational Manual: Attached Specifications: Mild steel capacity: 8 mm Cutting length: 6020 mm Cutting angle adjustment: 105°-3° Number of plate holders: 33 Number of strokes max. min. angle 4-8 Stroke backgauge: MOT(1) version: 1000 mm SAB(2) version: 1000 mm/s Working height 1130 mm Motor power: 15 kW Weight approx.: 26 tonnes Voltage: 3x400V Year of construction: 2011 Find more here - / Contact us at -

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -engine bell -Coupling: Ø 200 mm -Weight: 90 kg

hydraulic unit -The hydraulic unit comes from a hydraulic elevator -Design: IM 1209

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -Weight: 26 kg -Dimensions: 330 x 170 x 180 mm

Key data: 3000 mm, 6 mm

Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight: approx. 6500 kg

Refer to code 1177 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Mot. Adjustable rip fence: 1500 mm Mot. Adjustable cutting gap adjustment Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side protective grille with light barrier back Dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm Weight: approx. 13,5-ton

hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -double pump -Max. pressure: 60/200 bar -Liter flow rate: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank -Hydraulic filter -Weight: 230 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Spare part E forklift -Power supply: 24 volts -Power: 2.8 kW -Speed: 1600 rpm -Hydraulic tank -Weight: 70 kg

Specifications: Maximum cutting width: 4050 mm Maximum cutting capacity steel St40: 13 mm Maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons

Refer to code 1183 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel: 0.4 - 4.0 mm CNC control: CYBELEC DNC 10 Adjustable rip fence: 100 mm Electronic cutting depth adjustment Recess: 520 mm Working height: 1030 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 2900 x 2300 x 1750 mm Weight: approx. 5 tons

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 80 bar -Liter flow rate: 18 l/min -Motor: 2.2 kW 950 rpm -Hydraulic tank: 800/650/H280 mm -Dimensions: 1000/650/H1150 mm -Weight: 400 kg

Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg

Hydraulic motor, oil motor, hydraulic pump Model No.: 013.44186 -Toothed shaft mounting: Ø 44 mm -Dimensions: 470/260/320 mm -Weight: 130 kg

radial piston motor, hydraulic motor, oil motor, hydraulic pump -Shaft mounting: Ø 63 mm -Number: 1x motor available -Price: per piece -Recess recording: 314 mm -Dimensions: 550/460/460 mm -Weight per motor: 190 kg

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel 400 N/mm2: 13.0 mm Adjustable rip fence: 1000 mm Adjustable cutting gap adjustment Adjustable cutting angle adjustment Working height: 940 mm Dimensions (length x width x height): approx. 3700 x 2800 x 1950 mm Weight: approx. 9,6 tons

pressure: 120 t stroke: 400 mm dayligth: 900 mm feed down: 5,8 mm/sec feed up: 9,5 mm/sec Heads: 200x125 mm total power requirement: 6 kW weight of the machine ca.: 1250 kg dimensions of the machine ca.: 1900x1000x2450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic motor, oil motor, hydraulic pump -Model Type: MF100 -Toothed shaft mounting: Ø 40 mm -Quantity: 2 available Price: per piece -Dimensions: 430/240/200 mm -Weight: 50 kg/piece

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 63 bar -Liter flow rate: 4 l/min -Drive: 0.75 kW -Hydraulic tank -Hydraulic valve - Additionally: Hand hydraulic pump -Weight: 110 kg

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3100 mm Maximum cutting capacity steel: 16.0 mm Maximum cutting capacity stainless steel: 12.0 mm CNC control: SP 9 (new) Mot. Adjustable rip fence: 1000 mm Cutting gap adjustment Working height: 1050 mm new knives CE mark Motor power: 30 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2350 mm Weight: approx. 15,5 tons

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 40 bar -Liter flow rate: 15 l/min -Drive: 0.55 kW 1400 rpm -Hydraulic tank -Foot switch -Weight: 100 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 50 mm -Piston rod: 36 mm -Stroke: 580 mm -Total length when retracted: 820 mm -Total length extended: 1400 mm -Piston rod thread -Ideal for building a hydraulic press - universally applicable -Dimensions: 1040/220/H200 mm -Weight: 30 kg

Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

pressure: 200 t stroke: 400 mm Frame Width: 450 mm column daylight: 1300 mm cylinder diameter: 170 mm work height max.: 900 mm Front light range: 1400 mm Lateral light range: 450 mm total power requirement: 7,5 kW weight of the machine ca.: 2600 kg dimensions of the machine ca.: 2500x1100x2800 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools Quantity: 4 pieces -Clamping height: 95 mm Price: for 4 pieces -Weight: 10 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

PART NUMBER: 7552 Specifications: - dimensions of the hobs 2550x1350mm - number of batches 2 - electrically heated shelf - total ground clearance 400mm - Clearance between shelves 280mm and 100mm - Number of cylinders 4 - cylinder diameter 90mm - 1.1kW pump motor - total power 31.3kW - dimensions length/width/height 3050x1600x2200mm - weight about 3500kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – very good condition – used press Net price: 28900 PLN Net price: 6721 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

PART NUMBER: 7553 Specifications: - dimensions of the hobs 2550x1100mm - number of batches 1 - electrically heated shelf - ground clearance 360mm - Number of cylinders 4 - cylinder diameter 80mm - emergency disconnection of the machine - total power 15.5kW - 1.5kW pump motor - dimensions length/width/height 2900x1300x2100mm - weight about 3000kg ADVANTAGES – made in Germany – electrically heated shelves – golden shelves – unpainted – very good condition – used press Net price: 27900 PLN Net price: 6488 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

pressure: 160 t stroke: 400 mm dayligth: 900 mm Heads: 225x135 mm feed down: 6,2 mm/sec feed up: 9,8 mm/sec total power requirement: 6 kW weight of the machine ca.: 1.300 kg dimensions of the machine ca.: 1640x1000x2550 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t stroke: 400 mm total power requirement: 4,0 kW : 7,4 mm/s : 11,5 mm/s Heads: 160x95 mm weight of the machine ca.: 725 kg dimensions of the machine ca.: 1560x850x2400 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic pump with gasoline engine -mobile hydraulic unit -Gasoline engine: JLO L152 -Power: 4.4 KW -Hydraulic pump: Hawe R6.0 -Performance: 4.3 L/min at 1450 rpm, pressure 350 bar

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg

pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm dayligth: 900 mm distance between columns: 300 mm Heads: 175x115 mm feed down: 7,6 mm/sec feed up: 13,4 mm/sec total power requirement: 4,0 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.