hydraulic used for sale

Sheet thickness: 18,00 mm Bending length: 3000 mm Number of rolls: 3   Make Roundo 18 mm Type PS 310 Year 1980 3 roll hydraulic plate bender Sheet thickness (mm) T = 18 mm Bending length (mm) L = 3.000 mm Number of rolls 3 roller Top roll = 310 mm Hydraulic opperated Dro positions side rolls  

Max. hydraulic pressure: 200bar, hydraulic oil capacity: 400l, length: 2000mm, width: 1500mm, height: 1000mm, with operating instructions, wiring diagram and installation instructions, on-site inspection is possible.

Hydraulic drive with hydro motor Electrical power: 55 kW Hydraulic pump: Manufacturer: MANNESMANN REXROTH Type: A4VSG250E01/10R-PPB10 Hydromortor Manufacturer: RIVA CALZONI Type: MR4500LPITIN1N1 Outlet shaft diameter: 110 mm Shaft length: 185 mm Weight: ~450 kg Overall size (without shaft): diameter: 850 mm height: 600 mm

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 - 20 Hub/min oil volume: 310 ltr. cutting angle: 0,05 - 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 13.300 kg range L-W-H: 5.110 x 2.570 x 2.400 mm -------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, includi ...

Used hydraulic power unit Radial piston pump BOSCH REXROTH Type: PR4-30/6.30-500RA01M01 WNR:R901088867 Q: approx. 8 l/min p max: 500 bar Engine 11 kW 1460 rpm 500V Tank: approx. 80 l Dimensions: approx. 1100 x 800 x 800 mm The hydraulic unit is supplied without oil. Changes and errors in the technical data, information and prices as well as prior sale reserved.

Used hydraulic power unit BOSCH Pump Type 0513400205 140 bar V 25 cm³ Engine 5.5 kW 1445 rpm 400/690 V Tank: approx. 0.2 m³ With pressure accumulator and various solenoid valves Dimensions: approx. 1000 x 700 x 1700 mm The hydraulic unit is supplied without oil. Changes and errors in the technical data, information and prices as well as prior sale reserved.

Used hydraulic power unit BOSCH Pump Type 0513400205 140 bar V 25 cm³ Engine 5.5 kW 1445 rpm 400/690 V Tank: approx. 0.2 m³ With pressure accumulator and various solenoid valves Dimensions: approx. 1000 x 700 x 1500 mm The hydraulic unit is supplied without oil. Changes and errors in the technical data, information and prices as well as prior sale reserved.

offer 22537 Specifications: - working width 4040 mm - cutting capacity St 40 6 mm - Cutting angle hydro.adjustable 0.5 - 3 ° - Cutting gap adjustment hydr. - Number of hydraulic hold-downs 22 pcs -Mot. – Backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 p/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - with: - E-foot switch - Cutting line lighting - Pneumatically supported sheet metal lifting

Hydraulic copying device SAUTER type KMC 8001 The copying device comes from a lathe. Connections for oil supply and oil return Operating pressure: max. 60 bar Volume flow: max. 7 litres/min. Net weight Copying device: approx. 100 kg good condition The matching hydraulic unit and the holders for the sample parts is also offered here in the shop under Suchbgriff Sauter.; used

Hydraulic unit REXROTH Year of construction approx. 1970 Operating pressure nominal capacity: 50 bar Operating pressure: max. 70 bar Volume flow: approx. 40 litres/min. Tank capacity: 240 litres Engine power: 4 kW Mains connection: 380 Volt, 50 Hz - 1x electro hydraulic valve BOSCH Space requirement length: 1020 mm, width: 610 mm Height: 1000 mm Net weight: approx. 170 kg; used

Hydraulically switchable gearbox Year of construction approx. 1985 Changeable gearbox for fast change of direction of rotation Clockwise or counterclockwise electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW) - 2 solenoid valves for switching from left to clockwise rotation - equipped with pulleys 230 and 200 mm Overall dimensions L x W x H: 480 x 520 x 430 mm Weight: 170 kg good condition; used

Hydraulic guillotine shears STEINER type HTS 30/20 R Masch. No. 315 Year of construction 1982 Cutting length 3050 mm Cutting thickness 20 mm Backgauge 800 mm controlled Motor power approx. 30 kW Mains connection 400 Volt, 50 Hz - Backgauge with positioning control ELGO - Backgauge adjustment via ball screws - Safety light barrier SICK front as intervention protection - 3 pieces of material support arms with ball castors - electric foot switch - spare knife Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space required for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul.; used

Single stand - hydraulic press SCHULZ type SES 250 Masch.Nr. 04.86.3511/3 Year of construction 1986 Compressive force 25 ton. Retraction force 10 to radius 360 mm Table surface 600 x 720 mm Ram surface 500 x 500 mm Diarrhoea opening in the table 100 mm Clamping pin hole 40 mm Ram stroke 400 mm Installation height max. 600 mm Table height above corridor 935 / 775 mm Tank capacity Hydraulic 380 litres Drive power 7.5 kW Mains connection 380 volts, 50 Hz - Fixed stop adjustment in press cylinder 180 mm- SICK photoelectric sensor - 2-hand operation - Substructure made of 160 mm U-steel Space requirement L x W x H 1900 x 1300 x 3100 / 3260 mm Weight 3.6 ton. good condition; used

Single Stand - Hydraulic Press DUNKES Type HZT 2,5 Masch. Nr. H94-2558 Year of construction 1994 Compressive force 2,5 ton. Projection 180 mm Table surface 420 x 300 mm Diarrhoea opening in the table 60 x 185 mm Ram surface 40 mm Pine bore 20 mm Ram stroke 160 mm Installation height max. 250 mm rapid traverse Down 65 mm /sec. Rapid traverse upwards 160 mm/sec. Working speed 8.3 mm/sec. Table height above corridor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 litres Drive power 1.5 kW Mains connection 400 Volt, 50 Hz - Pressure and displacement cut-off - 2-hand operation on the machine - Stroke counter - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read operating hours Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg very good condition; used

offer 21001 Specifications: - working width 3050 mm - cutting capacity St 40 10 mm - Cutting angle 2 ° - Cutting gap adjustment by manual hand - Number of hydraulic hold-downs 17 pcs - Motor - Backgauge 20 - 1000 mm - front angle stop + support arms - Hydraulic drive 400 V / 22 kW - Table height approx. 900 mm - Space requirements incl. backgauge, without front support arms -ca. W 3900 x H 1950 x D 2250 mm - Weight approx. 7800 kg - with: - E-foot switch - Cutting line illumination - - Cutting length preselection

Hydraulic self-centering bezel, Luenette, Lynette SMW AUTOBLOK Hydraulic bezel with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER Lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Bezel base: 245 x 240 mm Type: fixed - 3 pieces roller bearing 35 mm- roll width 18 mm - hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Net weight: 65 kg good condition; used

Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Fabr. Product code: 124984 Year of construction 2017 Load capacity 300 kg Platform size 1250 x 800 mm Useful stroke max. 785 mm Height - table bottom 345 mm Construction height - table top 1130 mm Motor power 0.8 kW Mains connection 400 volts, 50 Hz - Foot switch for up and down, with emergency stop and key switch for control Single scissors with a lifting cylinder - circumferential safety contact strip with limit switches under the upper ramen - adjustable limit switch for the upper lifting restriction - table surface with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic unit with tank mounted under the table- feet under the table corners, mobile with pallet truck own weight 430 kg very good condition, almost as new; used

pressure: 80 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the ...

pressure: 60 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 4,0 mm/sec return speed: 10,0 mm/sec engine output: 4,0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounte ...

univeral hydraulic power unit manufacturer Langen & Co Germany Type: K -599-2 Nominal pressure 100 bar Tank:approx. 125 L p: 5.5 KW 1440 rpm AEG electric motor 380 Volt 50HZ 5,5 Kw Pmxa: 100 bar Liter power unfortunately not known. Equipment: Tank with pump Electric motor AEG 5.5 KW 1440 rpm Tankgr.ca. 125 litres Hydraulic accumulator installed in the tank, Oil heating + temperature controller other see PHOTOS Price: 500.-- net + VAT ex stock free loading truck

-Exhibition Machine- DERATECH Practica CNC hydraulic guillotine shears 3050 x 20 mm Available Model VAC-20 x 3050 mm Hydraulic kullissen-guided guillotine shears in robust design Cybelec CybTouch 8 controller Backgauge 1000 mm, foldable Angle stop 1000mm Support arms 1000 mm Knife for cutting VA material with 4 cutting edges Support table with ball rollers DWSQ0E Automatic cutting angle and cutting gap adjustment CE

pressure: 20,0 t stroke: 185 mm table surface area: 170 mm Breite column travel between the guideways: 510 mm weight of the machine ca.: 112 kg dimensions of the machine ca.: 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor with hydraulic pump for sale. Engine characteristics: Type: 280S/M-4 Power: 85kW n: 1780 1/min Pump characteristics: n: 1760 1/min Pressure 450 bar Other hydraulic accessories available.

4 pieces of hydraulic pump flanged to electric motor complete with accessories on Euro plate for sale. Characteristics pump Rexroth A10VSO 28 DR / 31 R Vg: 26cm3 DR: 240 Bar n: 1750 1/min Engine characteristics: Hatlapa 180M -4 Power: 21kW Other accessories: - 1 piece Blitz pressure vessel 40 liters / 16 bar - 2 Hydac filters, 25 bar - 2 pieces hydraulic pump - see photos for more

hydraulic power pack / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Engine: 2,,2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 load capacity 1000 kp Pn 16 Mpa hub: 700 mm length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm

Hydraulic power unit with air-operated hydraulic pump MAXIMATOR pump: G 15 - 2L ( G15-2L ) drive pressure: max.11 bar P: max. 320 bar Q: 62 cm3 Tank: approx. 100 l used, tested ! Dimensions: 645 x 540 x 955 mm

Hydraulic power pack with double hydraulic pump MARZOCCHI BOLOGNA, ABB pump: 3D135/9 series RO engine: M2AA132S 5,5 KW 380 - 420 / 660 - 690 V 1450 rpm tank: approx. 120 l with tub. used, tested ! Dimensions: 1000 x 720 x 1470 mm

Hydraulic power unit, mobile, hydraulic cylinder tester ORSTA P: 200 bar Engine: MA 100 L ( MA100L ) 2,2,2 kW 220 / 380 V 3 AC Tank: SKD 40-630 ( SKD40-630 ) TGL 10892 Tank capacity: 40 l used, tested ! Dimensions: 850 x 560 x 1180 mm

Hydraulic power pack with double hydraulic pump and cooling pump ORSTA pump1: 12/20.2-230 Pump2: 6,3/20.0-260 TGL 37069 max. 200 bar (pump) Engine: 1.5 kW 1400 rpm 220 / 380 V Tank: 175 l Cooling pump: CET 3COA2-27 New ! Dimensions: 1350 x 650 x 1200 mm

Hydraulic power unit, hydraulic pressure generator WMW TGL 30-7306 63 - 160 kp/cm² ( approx. 62 - 157 bar ) engine: 0.8 kW 380 V 3 AC 50 Hz usable oil quantity: 8 l used, tested ! Dimensions: 560 x 430 x 420 mm

Hydraulic power unit, hydraulic power unit BOSCH Type No. SH7 0072 1 0 813 239 964 P: max. 50 / 180 bar Q: 22 / 7,5 l/min pump: BOSCH B514021809 Engine: ADDA ANTRIEBSTECHNIK Type: FC112MT-4 4 KW 1400 rpm 380 / 660 V 3AC, 50 -60 Hz Tank: 100 l used, tested ! Dimensions: 990 x 710 x 530 mm

Hydraulic power pack with tank, universal power pack ORSTA, SACHSENHYDRAULIK 56334/02 Hydraulic pump: PZL HYDRAL Type: 4/16.0-210 TGL 37069 16 MPa ( 160 bar ) 4,0 dm3/min ( 4.0 l/min ) Engine: ATB AF 90S/4A-11 1,1 kW 1400 rpm 220 / 380 V 3AC 50 Hz IP54 Tank: max. 42 l New ! with documents ! Dimensions: 760 x 450 x 1200 mm

Hydraulic power pack with compressed air driven hydraulic pump GRACO FIRE-BALL pump: L83 6203876 air motor: B84 6203963 Ratio: 5::1 drive pressure: max. 12 bar Q: 10 l / min tank: approx. 10 l used, tested ! Dimensions: 260 x 250 x 650 mm

Hydraulic Valve, Hydraulic Pressure Reducing Module, Pressure Reducing Valve VICKERS DGMX1-3-PP AW 22 B ( DGMX1-3-PPAW22B ) 3 - 30 bar New ! Dimensions: 150 x 50 x 70 mm

Hydraulic Valve, Hydraulic Pressure Reducing Module, Pressure Reducing Valve VICKERS DGMX2-3-PP FW B 40 ( DGMX2-3-PPFWB40 ) 315 bar used, tested ! Dimensions: 200 x 46 x 40 mm

Hydraulic cylinder, double-acting, bypass check valve and lowering brake holding valve HYDROPA OIL HYDRAULIC HYA-M-80/56-580-SO-C04 piston diameter: Ø 80 mm rod diameter: Ø 566 mm stroke: 580 mm p max. 250 bar Swivel bolt: Ø 50 mm 2x bearing block: 160 x 120 x 40 mm fork bearing block: 215 x 210 x 150 mm bolt: Ø 50 mm bypass check valve: BERINGER KPL FO 16 Lowering brake holding valve: BERINGER LBV 12 FO 215-10/0,50 Pressure switch: HYDROPA HYDROSTAR DS 302/SCH/V2 p: 20 - 350 bar, pmax: 600 bar 1 changeover contact Switching capacity: 250 V AC / 30 V DC, 3 A used, tested ! Dimensions: 1110 x 240 x 250 mm

Hydraulic motor, ORBMARK MOTOR NIPPON GEROTOR CO. LTD. ORB-S-070-2PG shaft diameter: 25 mm flange: 132 x 100 mm Flange inner ring: Ø 82 mm spare part for machining center MAZAK AJV25/405 ! used, tested ! Dimensions ( without hydraulic connections ): 205 x 131 x 108 mm Dimensions: 205 x 131 x 160 mm

Hydraulic pump with engine JUNGHEINRICH Hydraulic pump: REXROTH PGF-22/016LN20VM-A370 00929974 Engine: JUNGHEINRICH Type P13-01/6817614 7,7,2 kW 1460 rpm 48 V DC spare part for JUNGHEINRICH ETV A 13,5 GE !, among others used, tested ! Dimensions: 550 x 300 x 270 mm

Hydraulic tank, tank for hydraulic power unit PARKER tank capacity: approx. 3 l Inside dimensions: 215 x 115 x 150 mm Material: Plastic expansion tank from HY1418 used, checked ! Dimensions: 230 x 155 x 290 mm

Hydraulic cylinder, single-acting HÄNCHEN HYDRAULIK Type: A36335999 max. 120 bar Piston diameter: Ø 32 mm Rod diameter: Ø 14 mm stroke: 550 mm Mounting flange ( rod ): Ø 38 x 20 mm Mounting flange (hydraulic cylinder): 70 x 55 mm Spare part for HECKERT CWK400 machining centre, among others ! used, tested ! Dimensions: 215 x 88 x 75 mm

hydraulic motor, hydraulic motor DANFOSS OMR 200 ( OMR200 ) 151-0245 nmax: 300 rpm pmax: 175 bar Vmax: 200 cm3/revolution shaft diameter: Ø 32 mm Flange diameter ( inside ): Ø 83 mm used, tested ! Dimension: 230 x 130 x 130 mm

Hydraulic pump, double hydraulic pump (part) ORSTA C 10-3 R ( C10-3R ) TGL 10859 Dimensions: 150 x 140 x 120 mm

Hydraulic pump, double hydraulic pump (part) ORSTA C 10-2 R ( C10-2R ) TGL 10859 Nominal pressure: 16 MPa ( 160 bar ) nominal flow rate: 10 dm3/min nominal speed: 1450 rpm shaft: Ø 22 / 18 mm, spline shaft profile, 6 wedges flange: 112 x 92 mm New ! Dimensions: 185 x 95 x 115 mm

Hydraulic pump, double hydraulic pump (part) ORSTA C 16-2 R ( C16-2R ) TGL 10859 Nominal pressure: 16 MPa ( 160 bar ) nominal flow rate: 16 dm3/min nominal speed: 1450 rpm shaft: Ø 22 / 18 mm, spline shaft profile, 6 wedges flange: 112 x 92 mm overhauled, tested ! Dimensions: 185 x 95 x 115 mm

Double Hydraulic Pump, Hydraulic Pump, Gear Pump ORSTA 16/20.0-260 16/20.3-230 TGL 37069 ( TGL37069 ) Nominal pressure: 20 MPa ( 200 bar ) Nominal displacement volume: 16 cm3/min Nominal speed: 1500 rpm shaft: Ø 25 mm, with cone 1 : 10 Flange: 156 x 132 mm New ! Dimensions: 360 x 135 x 180 mm

Hydraulic cylinder, double-acting REXROTH CY210D180/125-90Z11/01CXUM11T 00559366 Rod diameter: Ø 125 mm piston diameter: Ø 180 mm stroke: 90 mm Rod thread diameter: Ø 100 mm pitch: 2,, 0 Length: 100 mm Base: 320 x 214 mm hole spacing: 270 / 167 mm hole diameter: Ø 30 mm hydraulic valve: AGEV1-29835-CA/HM 00547181 used, tested ! Dimensions: 320 x 320 x 490 mm

Hydraulic rod end, rod end for hydraulic cylinder ORSTA bolt diameter: Ø 50 mm thread ( inside ): M30 x 1.5 x 30 mm (length) 2x thread M10 x 1.5 for clamping screws New ! Dimensions: 130 x 103 x 43 mm

Hydraulic module, directional control valve, hydraulic valve REXROTH 316932 Dimensions: 100 x 60 x 35 mm

Hydraulic module, directional control valve, hydraulic valve ATE HYDRAULIK, ALFRED TEVES GMBH Order - Order No. 22.9342 - 2202.3 Werk - No. 30 Dimensions: 270 x 150 x 100 mm