hydraulic unit used for sale

Hydraulic pump, oil pump, gear pump -Internal gear pump -System: Trochocentric -Operating pressure: 175 bar -Delivery rate: 25 cm³/rev -Dimensions: 180I168/H135 mm -Weight: 6 kg

pressure: 180 t stroke: 400 mm column daylight: 1500 mm Frame Width: 550 mm distance spindle /table: max. 1000 mm total power requirement: 7,5 kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: 2300x1200x2850 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 110 bar -Liter output: 0.25 l/min -Motor: 24 V 22 W. -Hydraulic tank -Dimensions: 195/280/H160 mm -Weight: 17 kg

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Beeks: hard -Chuck size: Ø 250 mm -Short taper mount for: bayonet disc -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Mounting thread: M20 -Gradient: 2.5 mm -Weight: 32 kg

Hydraulic filter changer: 200 mm. With pressure transducer.

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 70 mm -Piston rod: Ø 40 mm -Stroke: 360 mm -Total length retracted center center hole: 725 mm -Recording piston rod: Ø 35 x 25 mm -Recording cylinder: Ø 35 mm x 25 mm -Dimensions: 815/70/H90 mm -Weight: 15 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 80 mm -Piston rod: Ø 40 mm -Stroke: 138 mm -Holder: Ø 35 x 25 mm -Dimensions: 530/80/H115 mm -Weight: 11 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Function:single acting -Piston diameter: 90 mm -Piston rod: Ø 55 mm -Eye diameter: Ø 35 mm -Stroke: 490 mm -Number: 4x available -Price: per piece -Dimensions: 820/110/90mm -Weight: 22kg

Hydraulic oil tank -Tank height: 200 mm -Tank capacity: 3.6 L. -Dimensions: 190/350/H290 mm -Weight: 5 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 28 mm -Diameter eyes: 25/35 mm -Stroke: 44 mm -Number: 1x cylinder available -Price: per piece -Dimensions: 495/95/H105 mm -Weight: 9 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 40 mm -Piston rod: Ø 12 mm -Stroke: 60 mm -Admission piston rod: M12 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: Ø 55/H250 mm -Weight: 3 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 40 mm -Piston rod: Ø 19 mm -Stroke: 105 mm - Universally applicable: -Quantity: 1 available -Price: per piece -Dimensions: 390/90/H55 mm -Weight: 2.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 80 mm -Piston rod: Ø 35 mm -Stroke: 130 mm -Number: 1x available -Price: per piece -Dimensions: 470/170/H95 mm -Weight: 11.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 32 mm -Piston rod: Ø 22 mm (M20 x 1.5 mm thread) -Stroke: 420 mm -Pressure: 210 bar -universally applicable: -Dimensions: 605/70/H45 mm -Weight: 4.8 kg

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 30 mm -Stroke: 138 mm -Number: 1x available -Price: per piece -Dimensions: 620/80/H95 mm -Weight: 12.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 70 mm -Piston rod: Ø 25 mm -Diameter eyes: 30 mm -Admission shaft: M24 -Stroke: 77 mm -Number: 1x cylinder available -Price: per piece -Dimensions: 635/105/H80 mm -Weight: 8.7 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 35 mm -Piston rod: Ø 32 mm -Stroke: 450 mm -Quantity: 1 piece available -Dimensions: 645/55/H70 mm -Weight: 6.7 kg

Hydraulic press 1500 tons. Clearance between the two side pistons = 1400 mm. Clearance between uprights = 400 mm. Vertical clearance between open boards 3200 mm. Moving table dimensions = 1700 x 1800 mm. Fixed table size = 1500 x 2000 mm. This press has been used to produce forks for forklift.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 100 mm -Piston rod: Ø 45 mm -Stroke: 100 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 480/145/H130 mm -Weight: 19 kg

Hydraulic Shear COMESSA CP 316 Capacity: 3000 x 16 mm Back gear gauge travel: 1000 mm Throat depth: 500 mm Motor power: 35 CV Adjustable blades 4 cutting blade Voltage: 380 V Dimensions (L x W x H): 3500 x 2200 x 2400 mm Weight: 16,5 T

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 20 mm -Stroke: 150 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: Ø 50/H445 mm -Weight: 6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 90 mm -Piston rod: Ø 40 mm -Diameter eyes: 40/40 mm -Stroke: 75 mm -Number: 4x cylinders available -Price: per piece -Dimensions: Ø 105/H555 mm -Weight: 18 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm -Piston rod: Ø 36 mm -Stroke: 125 mm -universally applicable: -Number: 2x available -Price: per piece -Dimensions: Ø 95/H575 mm -Weight: 19 kg

Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg

Hydraulic pump, oil pump, gear pump -Power: 0.8 kW 1370 rpm -Protection class: -Dimensions: Ø 154/H485 mm -Weight: 26 kg

Hydraulic pump, oil pump, gear pump -Power: 1.5 kW 1400 rpm -Dimensions: 540/320/H320 mm -Weight: 48kg

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

Radial piston motor, hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 34 mm -Flange: Ø 180 mm - Universally applicable: -Number: 1x motor available -Price: per piece -Dimensions: Ø 205/258 mm -Weight: 23 kg/piece

Hydraulic pump, oil pump, gear pump -Power: 0.25 kW 2820 rpm -Protection class: IP 55 -Dimensions: 370/190/H190 mm -Weight: 10 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 160 mm -6 set: clamping jaws -Weight: 17.5 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 22 mm -Stroke: 700 mm -Dimensions: 118/71/H915 mm -Weight: 10.9 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 50 mm -Piston rod: Ø 25 mm -Diameter eyes: 25/30 mm -Stroke: 90 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 62/62/H330 mm -Weight: 5.1 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder for: Pallet stacker, make: OMG, type 214EA -Cylinder made of: stainless steel -Piston: Ø approx. mm -Piston rod: Ø 45 mm -Stroke: 110 mm -Dimensions: 120/160/H310 mm -Weight: 8.4 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder comes from a Hitchi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 50/50/H720 mm -Weight: 4 kg

Hydraulic filter changer: 250 mm, brand: Tecnova, double filter, for extruder 160 Ø diam, year: 2009. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 44/44/H595 mm -Weight: 3.1 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

Key data: 10 t, 300 mm, 300 mm

more info on request

Key data: 3000 mm, 8 mm

Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limitation Knife sharpened Weight: 6,800 kg