hydraulic unit used for sale

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 250 mm -Cone: Ø 94 mm -Thread: M20 -Gradient: 2.5 mm -Weight: 33.3 kg

Technical data of the hydraulic grille for 3-roller sheets Faccin HAV 3172 used: Upper roller diameter: 720 mm Diameter of side rollers: 650 mm Power supply: 380V - 50Hz Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Hydraulic vice, machine vice, hydraulic vice, drilling machine vice -Jaw width: 125 x 45 mm -Clamping depth: 225 mm -Machine vice: rotatable -Dimensions: 430/300/H140 mm -Weight: 44 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers -OLEO hydraulic buffer -Type: 21 - M FS - 100 -Stroke: 150mm -Piston rod: Ø 76mm -Dimensions: 151/151/H584 mm -Quantity: 3 pieces of hydraulic buffers available -Price per piece -Weight: 18kg

Hydraulic hydraulic filter changer. Diameter: 220 mm. Motor: 4 Kw. With head of 43 threads (spaghetti). Hydraulic group with accumulator and electrical panel.

FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...

4 pieces of hydraulic pump flanged to electric motor complete with accessories on Euro plate for sale. Characteristics pump Rexroth A10VSO 28 DR / 31 R Vg: 26cm3 DR: 240 Bar n: 1750 1/min Engine characteristics: Hatlapa 180M -4 Power: 21kW Other accessories: - 1 piece Blitz pressure vessel 40 liters / 16 bar - 2 Hydac filters, 25 bar - 2 pieces hydraulic pump - see photos for more

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Pump max.pressure: approx. 60 bar -Pump max. Liter output: 14 l/min -1x drive: 1.5 kW 2850 rpm -Hydraulic filter -Hydraulic tank -Control valve -Dimensions: 740/370/H1160 mm -Weight: 120 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder for pedestrian stacker make: OMG type 214EA -Piston: Ø 32 mm -Piston rod: Ø 20 mm -Stroke: 150 mm -Max. Pressure: 300 bar -Dimensions: Ø 92/390 mm -Weight: 5.2 kg

Electric motor with hydraulic pump for sale. Engine characteristics: Type: 280S/M-4 Power: 85kW n: 1780 1/min Pump characteristics: n: 1760 1/min Pressure 450 bar Other hydraulic accessories available.

1 piece hydraulic radiator with electric motor, 2 pieces hydraulic pump and filter for sale. To be delivered completely on pallet. Other hydraulic components available.

Sight glass, inline sight glasses, disc valve, butterfly valve, ball valve -Sight glass: 805 x 25 mm -Dimensions: 930/58/H52 mm -Weight: 15 kg

Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 100 mm -Piston rod: Ø 40 mm -Diameter eyes: 35 mm -Stroke: 195 mm -Dimensions: 530/130/H120 mm -Weight: 21.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 25 mm -Diameter eyes: 22 mm -Stroke: 202 mm -Dimensions: 455/83/H95 mm -Weight: 8 kg

Teaching or test bench for hydraulic components with all accessories for sale.

Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 40 mm -Piston rod: Ø 25 mm -Stroke: 142 mm - Universally applicable: -Quantity: 1 available -Price: per piece -Dimensions: 425/60/H60 mm -Weight: 4.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 30 mm -Diameter eyes: 22/20 mm -Stroke: 40 mm -Number: 1x cylinder available -Price: per piece -Dimensions: 445/85/H110 mm -Weight: 7.8 kg

Unused Rexroth MCR5H565ZZ33A0M1L01SO533C hydraulic drive

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 100 mm -Piston rod: Ø 40 mm -Stroke: 82 mm -Piston rod holder: Ø 25 mm -universally applicable -Number: 2x cylinders available -Price: per piece -Dimensions: 465/150/H120 mm -Weight: 17.9 kg/piece

Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 55 mm -Piston rod: Ø 30 mm -Diameter eyes: 25/25 mm -Stroke: 57 mm -Number: 1x cylinder available -Price: per piece -Dimensions: 390/70/H105 mm -Weight: 7.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 90 mm -Piston rod: Ø 40 mm -Diameter eyes: 35/35 mm -Stroke: 55 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 555/210/H110 mm -Weight: 16 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 75 mm -Piston rod: Ø 40 mm -Stroke: 120 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 485/105/H105 mm -Weight: 11 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 40 mm -Piston rod: Ø 25 mm -Stroke: 100 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 355/80/H50 mm -Weight: 3 kg

Embossing press - embossing machine Hydraulic Pressing surface, 600 x 2700mm Heated pressing surface

Hydraulic power unit with control With oil cooling Ideal for building log splitters or hydraulic presses

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston Ø: approx. 80 mm -Piston rod: Ø 32 mm -Stroke: 148 mm -Number: 2x available -Price: per piece -Dimensions: 600/135/H135 mm -Weight: 13 kg

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 18 mm -Length: 35 mm -Dimensions: 215/153/215 mm -Weight: 6.8 kg

SPECIFICATIONS: Cold press Working table mm: 2500 x 1300 No. 4 pistons Vertical stroke: 450 mm

2000 Ton Sumitomo Hot Forging Press line Year 2006 Stroke 350 mm (13.78") Strokes per min 75 Shut height 850 mm (33.47") SlideAdj. 7 mm (.27") Ram size 1200 mm LR X 1300 mm FB Bed size 1320 mm LR X 1300 mm FB 4 stage transfer system Slide knockout Bottom knockout Scrap System Dual Die Changer Extra Die Shoes Billet Heater and Billet Saw Also Available This line was used by HONDA to make transmission gears, It takes a billet, cuts it to size, heats it to 1300 C then the press hits it 4 times. It can determine good from bad parts, the bad parts get sent to a quench tank, the good parts get sent into a cool down conveyor that you can pick the parts up by hand at the end. The entire system was ran by one operator.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Cylinder tube outer diameter: Ø 93 mm -Stroke: 800 mm -Total length when retracted: 985 mm -Dimensions: 985/93/H93 mm -Weight: 32 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 120 mm -Piston rod: Ø 36 mm -Stroke: 200 mm -Price: per piece -Number: 3 pieces -Dimensions: 755/120/H120 mm -Weight: 20.8 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 22.1 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 200 mm -Short taper: 6 -Weight: 25 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 28 kg

For sale is a used plate screen changer from the manufacturer BD Plast SRL. The screen changer is in a used but well maintained condition. Specifications: - Screen diameter: 250mm - Filter area: 491 cm² - Sealing ring PTFE/ Teflon - Heating capacity approx. 22kW - Number of control zones: 4 - Operating pressure max. 400 to 500 bar - Hydraulic unit designed for quick change - Throughput capability from 800 to 2,000 kg/h - Weight approx. 950 kg incl. documentation, documents, drawings, etc... Screen change can be visited by prior appointment.

1 pc. used worm drive motor - 5 cyl. radial piston motor ex Küpper-Weiss automatic spreader. Engine has run until the spreader is retired, sold as an untested spare parts carrier. More used parts as well as used winter service technology in stock - see example photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

pressure: 30 t stroke: 170 mm column daylight: 600 mm Frame Width: 200 mm distance spindle /table: max. 700 mm weight of the machine ca.: 200 kg Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination

SMO-4008-N QC12Y 8x4000 Hydraulic Press Brake Specifications - Maximum thickness of mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5 - Strokes/minute: 8 - Kickback distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total weight: 7300.0 kg Equipment - Backgauge driven by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade spacing adjustment - Ball transfer units built into the table - Task lighting - Front supports - Mobile footswitch Rear ramps The rear ramp has been equipped with ball transfer units, so that shutdowns are never left on the machine. E21S Controller (Located on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be saved - up to 25 different steps in each program - R ...

Hydraulic pump, oil pump, gear pump -Internal gear pump -System: Trochocentric -Operating pressure: 175 bar -Delivery rate: 25 cm³/rev -Dimensions: 180I168/H135 mm -Weight: 6 kg