hydraulic punching machine used for sale

With engine Olaer HMA2-90L-4 Auction-ID: A1-47842-402

Weight class: 6-9 t Operating pressure: 118-147 bar Oil flow: 50-90 l/min Impact force: 1450 J Hose connections: 1/2 inch Chisel diameter: 75 mm Chisel guide Scope of delivery: 1x Pyramid Chisel Operating instructions Spare parts list CE Declaration of Conformity Auction-ID: A1-47910-60

Max. baling capacity: 20 t, max. piston stroke: 185 mm, working area: 61 x 1021 mm, bed length: 548 mm, compressed air connection: 1/4 inch Auction-ID: A7-47533-163

Mixed Lot of Steering Hydraulic Components Suitable for New Holland CX8.80 Type 811 Year of construction machine 2015 Includes hydraulic valves, hydraulic lines, hydraulic cylinders, pulleys and idler pulleys Used Dismantled from combine harvester With signs of wear and tear due to age and use Partial traces of corrosion present Removed from a machine with fire damage Functional according to the owner before disassembly Further technical inspection not carried out Scope of delivery according to photos Sale due to disassembly of the machine Auction-ID: A1-47170-10008

Hydr. Ditch Cleaning Bucket HHG1100MS-BSYM-01 1000mm Excavator class: 1.2-1.9 ton Working width: 1000mm Opening width: 258mm Depth: 350mm Recording: MS01 (Symlock) Weight: 94 kg Volume (SAE) : 67 L Base body made of (S355J2+N) HB400 12x110 cutting edge Back blade made of HB400 12x110 Taper to the rear 2° 1 cylinder swivel angle 2x45° Load Holding Valve Hydraulic connections 10L Backhoe bucket HTL125MS-BSYM-01 250 mm Excavator class: 1.2-1.9 ton Working width: 250mm Opening width: 389mm Depth: 456mm Recording: MS01 Weight: 35 kg Volume: (SAE) 22 L Base body made of (S355J2+N) HB400 16x110 cutting edge Taper to the rear 3° Number of teeth: 2 screwed Backhoe bucket HTL150MS-BSYM-01 500 mm Excavator class: 1.2-1.9 ton Working width: 500mm Opening width: 389mm Depth: 455mm Recording: MS01 Weight: 38 kg Volume: (SAE) 59 L Base body made of (S355J2+N) HB ...

Hydr. Ditch Cleaning Bucket HHG1100MS-BSYM-01 1000mm Excavator class: 1.2-1.9 ton Working width: 1000mm Opening width: 258mm Depth: 350mm Recording: MS01 (Symlock) Weight: 94 kg Volume (SAE) : 67 L Base body made of (S355J2+N) HB400 12x110 cutting edge Back blade made of HB400 12x110 Taper to the rear 2° 1 cylinder swivel angle 2x45° Load Holding Valve Hydraulic connections 10L Backhoe bucket HTL125MS-BSYM-01 250 mm Excavator class: 1.2-1.9 ton Working width: 250mm Opening width: 389mm Depth: 456mm Recording: MS01 Weight: 35 kg Volume: (SAE) 22 L Base body made of (S355J2+N) HB400 16x110 cutting edge Taper to the rear 3° Number of teeth: 2 screwed Backhoe Bucket HTL160MS-BSYM-01 600 mm Excavator class: 1.2-1.9 ton Working width: 600mm Opening width: 389mm Depth: 455mm Recording: MS01 Weight: 39 kg Volume: (SAE) 72 L Base body made of (S355J2+N) HB ...

Excavator class: 1.2-2.3 ton Working width: 1000mm Opening width: 292mm Depth: 389mm Pick-up: MS01 Weight: 87 kg Volume (SAE): 74 L Base body made of (S355J2+N) Cutting edge made of HB400 12x110 Back blade 1 cylinder Swivel angle 2x45° Cylinder protection Load holding valve Hydraulic connections 10L optionally available: Throttle screw - allows exact adjustment of the bucket travel speed and thus a more precise positioning of the bucket Backhoe bucket HTL120MS-01-SYM 200 mm ECO Excavator class: 1.2-2.3 Ton Working width: 200mm Opening width: 339mm Depth: 463mm Pick-up: MS01 Weight: 26 kg Volume: (SAE) 20 L Base body made of (S355J2+N) Cutting edge made of HB400 12x110 Number of teeth: 2 screwed Backhoe bucket HTL140MS-01-SYM 400 mm-ECO Excavator class: 1.5-2.3 Ton Working width: 400mm Opening width: 339mm Depth: 463mm Pick-up: MS01 Weight: 35 kg Volume: (SAE) 46 L Base body made of (S35 ...

HX500 Hydraulic Hammer without Mounting Weight Class: 1.5 - 3.0 t Operating Pressure: 88-117 bar Oil Flow: 23-30 l/min Impact Force: 430 J Hose Connections: 1/2 Inch Chisel Diameter: 45 mm Bushed Chisel Guide Scope of Delivery: 1 x Pyramid Chisel Operating Instructions Spare Parts List CE Declaration of Conformity Please note that the device shown is shown in RAL7021. The actual execution can also be done in RAL9005 Auction-ID: A1-47910-20

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-47514-346

Auction-ID: A1-47842-630

Weight class: 4-7 t Operating pressure: 110-140 bar Oil flow: 40-70 l/min Impact force: 890 J Hose connections: 1/2 inch Chisel diameter: 68 mm Chisel guide Scope of delivery: 1 x Pyramid Chisel Operating instructions Spare parts list CE Declaration of Conformity Please note that the device shown is shown in RAL7021. The actual execution can also be done in RAL9005 Auction-ID: A1-47910-51

maximum lifting , power supply - 115V/24V, Includes remote control and charging converter Auction-ID: A7-47837-1

Auction-ID: A1-47842-631

Weight class: 1.5-3 t Operating pressure: 88-117 bar Oil flow: 15-30 l/min Impact force: 250 J Hose connections: 1/2 inch Chisel diameter: 40 mm Chisel guide bushed Scope of delivery: 1x pyramid chisel Operating instructions Spare parts list CE Declaration of conformity Please note that the device shown is shown in RAL7021. The actual execution can also be done in RAL9005 Auction-ID: A1-47910-10

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-47514-347

This hydraulic press manufactured in 2010 features a normal pressure of 1250 KN and a maximum working width of 3200 mm. It has a throat depth of 350 mm and a cylinder stroke of 160 mm. The machine operates at a working speed of 9 mm/s and has a robust construction with a weight of 8600 kg. If you are looking to get high-quality pressing capabilities, consider the KNUTH AHK A 32125 machine we have for sale. Contact us for further details.

Hydraulic press manufactured in 2015. This WINTER VSP 350 features a holding force of 3500 kN and a trimming force of 2500 kN. It offers a holding stroke of 50 mm and a trimming stroke of 100 mm, ensuring efficient operation. With a robust table size of 1290 x 1200 mm, this machine is designed for heavy-duty tasks. If you are looking to get high-quality pressing capabilities, consider the WINTER VSP 350 hydraulic press we have for sale. Contact us for further details.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to : 400 mm : 1000x680 mm : 1000x740 mm : 765 mm : 250 mm/s : 10-20 mm/s : 22 kW : 2400 mm : 1525 mm : 3900 mm : 10500 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 71300 € : 1347.57 € : 30 to : 300 mm : 500?800 mm : 600?900 mm : 550 mm : 100 mm/s : 18 mm/s : 165 mm/s : 11 kW : 1950 mm : 1900 mm : 2800 mm : 4850 kg : 160 bar : 12 to : 150 mm : 80 mm : 130 bar : 100 mm/sec. : 500x600 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to ",CE", rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59800 € : 1130.22 € : 100 to : 400 mm : 800 x 500 mm : 500 mm : 110 mm/s : 10 mm/s : 160 mm/s : 11 kW : 1900 mm : 1700 mm : 2930 mm : 5500 kg : 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created wi ...

8 assen: Y1 / Y2 / X / X#39; / R / Z1 / Z2 / V met Easy Form lasermeetsysteem met CNC-bombardement met Lazer Safe-bescherming met Willa hydraulische klemming boven en onder Turbo-versie Capacity: 220 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 120 mm/sec Working speed: 21 mm/sec Returning speed: 200 mm/sec Electric motor (power): 42 kW Length: 6320 mm Depth: 2850 mm Height: 3600 mm Weight: 20 ton Capacity: 220 ton Bending length: 4100 mm

: neu : ca. 4 Monate ab Auftragse : Italien : 35400 € : 676.14 € : 40 to : 500 mm : 700x350 mm : 700x500 mm : 500 mm : 250 mm : 26 mm/s : 9 mm/s : 4 kW : 1500 mm : 1000 mm : 2500 mm : 1500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Stroke counter € 400,- Decompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch ...

: neu : ca. 4 Wochen ab Auftragse : Türkei : 66900 € : 1264.41 € : 60 to : 250 mm : 550 x 850 mm : 600x1000 mm : 500 mm : 100 mm/s : 10 mm/s : 165 mm/s : 11 kW : 1950 mm : 1900 mm : 2750 mm : 5300 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 52500 € : 992.25 € : 60 to : 250 mm : 500x430 mm : 750x500 mm : 450 mm : 26 mm/s : 8,5 mm/s : 47 mm/s : 7.5 kW : 1820 mm : 960 mm : 2400 mm : 4000 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 59700 € : 1128.33 € : 100 to : 300 mm : 680x420 mm : 1100x600 mm : 500 mm : 17.5 mm/s : 5,5 mm/s : 37 mm/s : 7.5 kW : 1850 mm : 1400 mm : 2650 mm : 5400 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Miniloader powered with Kubota V1505 4 cylinder EURO5 diesel engine, water-cooled, 18.4KW, capacity 1,498 Liters, Advanced version; Hydraulics equipped with Rexroth plunger pump and Rexroth Travel motor, electronic control lever with soft operation and operation of multiple functions at the same time, Travel motor with 2 speed controls also operable on drive lever, LED work lights front and rear, Toyota adjustable and sprung seat with electronic sensor (switches off engine after 20 sec), Hydraulic quick couplings for adjusting parts (euro connection), Lifting capacity 850 - 1250kg, Hydraulic tank 32 liters, fuel tank 30 liters, machine weight 2570kg, dimensions 3000x1500x2200mm. Incl. manure fork with clamp, demo machine Auction-ID: A1-40419-19

Miniloader powered with Kubota V1505 4 cylinder EURO5 diesel engine, water-cooled, 18.4KW, capacity 1,498 Liters, Advanced version; Hydraulics equipped with Rexroth plunger pump and Rexroth Travel motor, electronic control lever with soft operation and operation of multiple functions at the same time, Travel motor with 2 speed controls also operable on drive lever, LED work lights front and rear, Toyota adjustable and sprung seat with electronic sensor (switches off engine after 20 sec), Hydraulic quick couplings for adjusting parts (euro connection), Lifting capacity 850 - 1250kg, Hydraulic tank 32 liters, fuel tank 30 liters, machine weight 2570kg, dimensions 3000x1500x2200mm. Incl. excavator bucket, unused machine Auction-ID: A1-40419-6

Auction-ID: A1-47531-10

unused pallet truck, 2500kg lifting capacity Auction-ID: A1-40419-77

This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given for the correctness of the information ; Auction-ID: A1-47343-68

Power: Hydraulic system; pw. N/C Operating parameters: Loading area 2,500 x 6,900 mm; operating hours ~100 h; dim. 8,000 x 2,500 x 2,000 mm; wt. 4,000 kg Workpiece capacity: Material handling; loading/unloading operations (scrap, timber, bulk materials) Supported edges: Industrial materials, scrap, wood (typ.) Edge types: Lifting; handling; loading Included equipment: Hydraulic arm; superstructure; remote control (included); mounting platform Compliance: Industrial handling equipment; CE N/C Power supply: Hydraulic (vehicle-mounted) Year/Manufacturer: 2023 / Atlas – 126.3E-A3 Remarks: Very low usage (~100 h); complete unit with superstructure and remote control; ready for installation/use Hydraulic loading arm with superstructure, suitable for trucks or stationary handling applications. Auction-ID: A7-46938-20

ITALPRESS MEC4S veneer press (273 x 127 x 179 cm) (opening dimension 300 mm), Press area 1110 x 2200mm stored for about 3.5 years! WITHOUT checking for completeness and function Pick-up only by arrangement Auction-ID: A1-47153-2

\"Condition: Brand New / Unused (Still in original factory protective wrap) ​Model: HYDROMEX EP.5-PRO (Hydromex Industrial Europe) ​Crimping Pressure: 500T (Heavy-duty 500-ton pressing force) ​Rated Pressure: 20 MPa ​Crimping Range: 6 – 51 mm ​Scale Accuracy: 0.02 mm (High-precision micro-adjustment) ​Motor Power: 4 kW ​Voltage: 380V (Three-phase power supply) ​Serial No.: MXHP2511024\" Auction-ID: A7-47928-4

Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40419-505

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62400 € : 1179.36 € : 4100 mm : 6 mm : 4 mm : 50 mm : 12 1/min : 1.5 ° : 20 : 17 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 3 Stk. : 865 mm : 580 mm : 4510 mm : 5230 mm : 2300 mm : 3600 mm : 2150 mm : 11460 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

: neu : ca. 4 Monate ab Auftragse : 1030 mm : 6 mm : 4 mm : 14 1/min : 3 ° : 7 : 500 mm : 5.5 kW : 100 l : 900 mm : 1550 mm : 1150 mm : 1600 mm : 1700 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 € : 3109.05 € : 260 to : 500 mm : 1400x1000 mm : 600 mm : 75 mm/s : 5 mm/s : 60 mm/s : 22 kW : 2800 mm : 1650 mm : 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 1965.6 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1530 mm : 12 mm : 9 mm : 8 1/min : 3 ° : 8 : 500 mm : 15 kW : 180 l : 950 mm : 2200 mm : 1200 mm : 1800 mm : 3400 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3050 mm : 06,5 mm : - : 0,5-2,5 ° : 1000 mm work height max.: 770 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sale from candelabra/lamp post factory liquidation. V. Jessernigg u. Urban 40 MP hydraulic press. Conditions: according to the pictures - operational. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-48022-35

: neu : Türkei : 70700 € : 1336.23 € : 100 to : 600 mm : 900 x 500 mm : 800 mm : 400 mm : 220 mm/s : 1 - 20 mm/s : 250 mm/s : 14,65 kW : 1900 mm : 1700 mm : 4400 mm : 6000 kg : 30 - 239 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Cooler Siemens electrical components 8 additional signal inputs and outputs 10-inch touchscreen PLC Siemens S7 1200 Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or SickTwo-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 100 to : 400 mm : 850x630 mm : 850x640 mm : 685 mm : 250 mm/s : 10-20 mm/s : 11 kW : 2030 mm : 1150 mm : 3565 mm : 7700 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 145000 € : 2740.5 € : 6080 mm : 6 mm : 4 mm : 350 mm : 10 1/min : 0.5 - 2 ° : 29 : 20 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 5 Stk. : 900 mm : 630 mm : 6370 mm : 7300 mm : 2150 mm : 3400 mm : 2750 mm : 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1530 mm : 16 mm : 12 mm : 7 1/min : 3 ° : 8 : 500 mm : 22.5 kW : 250 l : 950 mm : 2350 mm : 1400 mm : 2000 mm : 5200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 89700 € : 1695.33 € : 85 to : 500 mm : 700x400 mm : 800x600 mm : 600 mm : 300 mm : 105 mm/s : 41 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 1200 mm : 1600 mm : 2500 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic auger with CW05 connection for mini excavator or crane. This professional drilling unit comes with a drilling spiral, hydraulic drive, hoses and quick couplings. Suitable for a variety of earthworks such as the installation of fences, foundation piles, tree plantations and other drilling applications. The drill is equipped with a heavy-duty steel spiral and hydraulic drive. Ideal for overhaul, repair or use as a parts machine. Interesting for contractors, excavators, mechanization workshops and earthmoving equipment dealers. Shaft of the hydraulic motor has broken off (see photos) - Type: Hydraulic auger / earth drill Connection: CW05 quick coupler Application: Mini Excavator / Compact Excavator Including hydraulic drive Including drilling spiral Including hydraulic hoses Equipped with hydraulic quick couplings Robust steel construction CE marking available Brand plate partiall ...

Auction-ID: A1-46783-60

FEM3 mount, for forklifts with 2,500kg-5,000kg load capacity on pallet for loading into trucks FEM dimension 3A Fork length 135-200 mm Auction-ID: A1-48048-1103

Hydraulic forestry mulcher by Serrat Trituradoras (Spain). Manufacturer data: Brand: Serrat Trituradoras Model: K 001 – HASTOR 60 T-2000 Year: 2009 Serial number: K 20029 CE marking: Yes Shredder for mulching vegetation, branches and forest residues. Heavy-duty construction suitable for heavy-duty use. Working width approx. 2,000 mm. Hydraulic drive (visible fittings and hydraulic motor). The machine shows normal signs of use (scratches, paint wear), with no apparent structural damage. Auction-ID: A3-43552-33400