133,461 used machines on RESALE, but how to find them? Machine Search
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 500 mm table:: 1000 - 800 feed down: 150 -280 mm/sec feed under pressure: 10 - 26 mm/sec feed up: 180 - 300 mm/sec table height over floor: 750 mm total power requirement: 22 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Solid Peecon agricultural tipping trailer with a load capacity of 6 tons, suitable for the transport of agricultural products, raw materials, manure, rubble and various materials. The wagon is equipped with a hydraulic tipping system with a single tipping cylinder and has folding side panels and a tailgate for smooth loading and unloading. This tipper was built in 1992 by Peeters Landbouwmachines B.V. and is equipped with a sturdy chassis with tandemless axle construction. Thanks to its robust construction and simple mechanical construction, this trolley is a practical solution for use on farms, riding schools, construction sites or private property. The body shows clear signs of wear, corrosion and wear commensurate with age and use. Rust is visible in several places, mainly on the underside of the side panels and the chassis (see photos). An interesting opportunity for farmers, cont ...
Robust hydraulic bale lift for mounting on the three-point linkage of an agricultural tractor. This construction is equipped with two long bale pins and a hydraulic lifting mechanism, making round or rectangular bales easy to pick up, move and stack. The bale carrier has a sturdy steel frame with vertical guidance and hydraulic cylinder for lifting the fork construction. Thanks to its simple and robust construction, this implement is suitable for a variety of activities on farms, livestock farms and storage areas. The machine shows signs of wear, superficial corrosion and wear commensurate with age and use, but retains a solid construction. Ideal for loading, moving and stacking hay, straw or haylage bales. A practical agricultural tool for users looking for a simple and functional solution for daily bale handling. Auction-ID: A3-43548-14785
1 BLADE BLADE DIAMETER 550MM WITH CONVEYOR BELT AT THE ENTRANCE MARKING AND EXIT BELT CONTROL CABINET Auction-ID: A1-47766-23
Working parameters: Hydraulic clamshell bucket for excavator, with Morin M1 coupler. Equipment included: hydraulic cylinder, hoses, Morin M1 quick coupler. Year & Manufacturer: Manufacturer Morin. Notes: Pre-owned hardware, heavy corrosion, visible wear and peeling paint. Plaque C.A.C. Ateliers de Constructions visible. Serial number: 179151. Nominal pressure indicated: 250 bar. Width indicated on plate: 40 mm. Plate information to be checked before commissioning. Dimensions (mm): 1200 × 600 × 800 Weight (kg): 250 Auction-ID: A1-46667-10
Power: Hydraulic system; pw. N/C Operating parameters: Loading area 2,500 x 6,900 mm; operating hours ~100 h; dim. 8,000 x 2,500 x 2,000 mm; wt. 4,000 kg Workpiece capacity: Material handling; loading/unloading operations (scrap, timber, bulk materials) Supported edges: Industrial materials, scrap, wood (typ.) Edge types: Lifting; handling; loading Included equipment: Hydraulic arm; superstructure; remote control (included); mounting platform Compliance: Industrial handling equipment; CE N/C Power supply: Hydraulic (vehicle-mounted) Year/Manufacturer: 2023 / Atlas – 126.3E-A3 Remarks: Very low usage (~100 h); complete unit with superstructure and remote control; ready for installation/use Hydraulic loading arm with superstructure, suitable for trucks or stationary handling applications. Auction-ID: A7-46938-20
With extra box 210 x 400 x 200 With Piquer With roof Auction-ID: A3-43548-9049
Hydraulic press manufactured in 2006. This ERMAK CNC HAP 3100x300 features a pressing force of 300 tons and a bending length of 3100 mm. It is equipped with a high-precision Cybelec CNC control system and a robust steel frame construction, making it suitable for large and thick sheet metal bending. If you are looking to get high-quality bending capabilities, consider the ERMAK CNC HAP 3100x300 machine we have for sale. Contact us for further details.
sheet width: 4100 mm plate thickness: 6.35 mm thickness at Niro-steel: 4.00 mm cutting angle: 0.5 - 2.5 ° cutting gap adjustment: 0.05 - 0.8 mm no. of strokes: 9 - 26 Hub/min back stop - adjustable: 10.0 - 750 mm down holder: 22 Stk. oil volume: 200 ltr. engine output: 7.5 kW weight: 8000 kg. range L-W-H: 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours () Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment Includes digital display of actual values - Manual cutting gap adjustment via handwheel from the front (left) Includes analog value display - Electro-motorized backgauge with ball screws Includes digital act ...
: neu : ca. 4 Monate ab Auftragse : Italien : 120000 € : 2268 € : 300 to : 500 mm : 1000x500 mm : 1200x800 mm : 600 mm : 400 mm : 22 mm/s : 2 mm/s : 7.5 kW : 2300 mm : 1500 mm : 3100 mm : 11200 kg 4-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve ...
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92100 € : 1740.69 € : 3100 mm : 16 mm : 10 mm : 350 mm : 10 1/min : 2 ° : 14 : 61 to : 1000 mm : 200 mm/s : 37 kW : 410 l : 2 Stk. : 818 mm : 550 mm : 3580 mm : 4550 mm : 2250 mm : 3825 mm : 2250 mm : 15000 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglengt ...
: neu : ca. 4 Monate ab Auftragse : Italien : 38200 € : 729.62 € : 70 to : 500 mm : 700x350 mm : 700x500 mm : 500 mm : 250 mm : 24 mm/s : 5 mm/s : 4 kW : 1500 mm : 1000 mm : 2500 mm : 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil coo ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 80100 € : 1513.89 € : 60 to : 350 mm : 550?850 mm : 600?1000 mm : 600 mm : 100 mm/s : 10 mm/s : 165 mm/s : 11 kW : 1950 mm : 1900 mm : 2850 mm : 5350 kg : 170 bar : 24 to : 150 mm : 100 mm : 156 bar : 65 mm/sec. : 470?650 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to ",CE", rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : 1530 mm : 16 mm : 12 mm : 7 1/min : 3 ° : 8 : 500 mm : 22.5 kW : 250 l : 950 mm : 2350 mm : 1400 mm : 2000 mm : 5200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 55600 € : 1050.84 € : 30 to : 200 mm : 500?800 mm : 600x1000 mm : 450 mm : 100 mm/s : 18 mm/s : 165 mm/s : 11 kW : 1950 mm : 1750 mm : 2650 mm : 4700 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : 1280 mm : 12 mm : 9 mm : 9 1/min : 3 ° : 7 : 500 mm : 15 kW : 180 l : 950 mm : 1950 mm : 1200 mm : 1800 mm : 3200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 74100 € : 1400.49 € : 100 to : 300 mm : 600 x 900 mm : 700x1100 mm : 550 mm : 100 mm/s : 8,5 mm/s : 165 mm/s : 11 kW : 2100 mm : 2050 mm : 3050 mm : 6500 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 1992 : 090174 : Belgien : 17800 € : 1 : 3050 mm : 6 mm : 11 - 25 1/min : 0.5 - 3 ° : 18 : 750 mm : 11 kW : 3850 mm : 1750 mm : 1720 mm : 4600 kg : 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration ...
: gebraucht : 1998 : 090148 : prompt, Zwischenverkauf v : Belgien : 24900 € : 1 : 3100 mm : 6 mm : 0.5 - 3.5 ° : 9.5 kW : 950 mm : 4070 mm : 2330 mm : 3400 mm : 1850 mm : 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PU ...
pressure: 720 t stroke: 15 mm total power requirement: 3 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 1300 x 1800 x 2200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic power unit; various hydraulic hoses; 18x cylinder capacity approx. 100 tons each (length 31cm, diameter 200mm); 8 x cylinder small; Auction-ID: A1-42000-92
Equipped with: CAM S.r.l. hydraulic fork spreader / sideshift attachment for forklift from 2017 with serial number 28731175H, nominal capacity 2,500 kg, recommended working pressure approximately 140 bar, horizontal center of gravity 500 mm, vertical center of gravity approximately 225 mm, thickness approximately 65 mm, hydraulically adjustable fork position / sideshift function and suitable for mounting on standard forklift carriage for pallet and warehouse handling. Auction-ID: A1-40142-242
Equipped with 10 crimp sets; unused Auction-ID: A1-42000-123
Hydraulic power unit comes from a Waldrich long planing machine Weight 400Kg LxWxH 1200 x 800 x 1200mm Condition: unchecked (6) Auction-ID: A7-47818-920
Equipped with internal charger 220V; extendable platform to 315 cm long; Lightly used; Please note no papers or documents available! Auction-ID: A1-40142-308
This frame press is CE certified according to the latest guidelines - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 10 t Stroke 180 mm Clear width between uprights 335 x 115 mm Installation height max. 340 mm Cylinder diameter 56 mm Piston diameter 40 mm Machine weight approx. 0.05 t Dimensions approx. 0.75 x 0.53 x 1.6 m Auction-ID: A7-47818-737
Self-propelled hydraulic clinker holder equipped with an 11.4 kW Lister-Petter diesel engine. This machine is specially designed for transporting, handling and moving clinkers, pavers, curbs and other road materials on construction sites. The equipment has a hydraulic holding system allowing the safe transport of loads while facilitating their installation. Its compact design and high maneuverability make it particularly suitable for outdoor landscaping, paving and curbing work. The hour meter shows approximately 2,482 operating hours. Used machine with normal traces of use consistent with its age and activity. Sold in the condition it is in at the time of sale. Auction-ID: A3-43552-37018
Frame press, CE certified according to the latest guidelines. - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 20 t Stroke 180 mm Clear width between uprights 540 x 100 mm Installation height max. 990 mm Cylinder diameter 72 mm Piston diameter 48 mm Machine weight approx. 0.12 t Space requirement approx. 0.8 x 0.7 x 1.8 m Condition: never used / new (5) Auction-ID: A7-47818-787
Mirrors , blue spot , flash light , hydraulic valve for tipper , battery with automatic filling Auction-ID: A3-43547-362
Equipped with 3 crimp sets; unused Auction-ID: A1-42000-124
sheet width: 3050 mm plate thickness: 13.0 mm thickness at Niro-steel: 8.0 mm work height max.: 930 mm no. of strokes: 9 - 17 Hub/min cutting angle: 0.5 - 3.0 ° down holder: 18 Stück Control: SC 90 engine output: 22.0 kW weight of the machine ca.: 9500 kg range L-W-H: 4270 x 2200 x 2250 mm Good / well-maintained condition () Current list price approx. 80.000 euros Features: - Electro-hydraulic / slide-guided guillotine shear - HACO CNC control model SC 90 Preset positioning of the backgauge Digital display of actual position Electro-hydraulic cutting angle adjustment Electro-hydraulic cutting gap adjustment LCD display Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulic hold-down devices - Front finger guard - Ball bearings in the support table Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 100 to : 400 mm : 850x630 mm : 850x640 mm : 685 mm : 250 mm/s : 10-20 mm/s : 11 kW : 2030 mm : 1150 mm : 3565 mm : 7700 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 68700 € : 1298.43 € : 3100 mm : 13 mm : 8 mm : 50 mm : 13 1/min : 1.75 ° : 16 : 37 to : 1000 mm : 200 mm/s : 30 kW : 330 l : 2 Stk. : 840 mm : 600 mm : 3550 mm : 4280 mm : 2300 mm : 3600 mm : 2350 mm : 12500 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttingleng ...
Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 140 bar -Flow rate: 30 l/min -Motor: Lammers 1400 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 910/520/H970 mm -Weight: 225 kg
Weight class: 1.2-2.5 t Operating pressure: 88-117 bar Oil flow: 15-25 l/min Impact force: 250 J Hose connections: 1/2 inch Chisel diameter: 40 mm Chisel guide bushed Scope of delivery: Operating instructions Spare parts list CE Declaration of conformity 1x pyramid chisel Tool case without holder Auction-ID: A1-47910-140
Weight class: 2.5-4.5 t without pick-up Operating pressure: 88-117 bar Oil flow: 25-50 l/min Impact force: 586 J Hose connections: 1/2 inch Chisel diameter: 53 mm Chisel guide bushed Scope of delivery: Operating instructions Spare parts list CE Declaration of conformity 1x pyramid chisel Tool case Auction-ID: A1-47910-160
Order number SKF: 4503115186, SKF Art. Item No.: 701249 Auction-ID: A1-47842-625
Hydr. Ditch cleaning bucket HHG1100-Morin-M0 1000mm Excavator class: 1.2-2.3 ton Working width: 1000mm Opening width: 292mm Depth: 389mm Recording: Morin M0 Weight: 90 kg Volume (SAE) : 74 L Base body made of (S355J2+N) HB400 12x110 cutting edge Back cutting edge 1 cylinder swivel angle 2x45° Cylinder protection Load Holding Valve Hydraulic connections 10L Backhoe Bucket HTL120-Morin-M0 200 mm Excavator class: 1.5-2.3 ton Working width: 200mm Opening width: 339mm Depth: 463mm Recording: Morin M0 Weight: 24 kg Volume: (SAE) 20 L Base body made of (S355J2+N) HB400 12x110 cutting edge Number of teeth: 2 screwed Backhoe Bucket HTL140-Morin-M0 400 mm Excavator class: 1.2-2.3 ton Working width: 400mm Opening width: 339mm Depth: 463mm Recording: Morin M0 Weight: 32 kg Volume: (SAE) 46 L Base body made of (S355J2+N) HB400 12x110 cutting edge Number of tee ...
Without recording; Weight class: 15-20 t; Operating pressure: 150-180 bar; Oil flow: 90-120 l/min.; Impact force: 2600 J; Beat rate: 350 - 650 beats/min.; Hose Connectors: 1 inch; Chisel diameter: 125 mm; chisel guide bushed; Scope of delivery: operating instructions; Spare parts list; CE Declaration of Conformity Auction-ID: A1-47910-90
Prim-Ball 2-axle SD semi-trailer. First registration: 29/01/1990. Equipped with vertically opening side tarpaulins by means of cylinders driven by electrohydraulic group. Two-leaf rear door. Large cargo volume. New tyres according to the information provided. Equipment reviewed. Suitable for general freight transport. Used condition with normal signs of use and age. Auction-ID: A7-47795-4
Häner HX300S Hydraulic Hammer Slim Line without recording Weight class: 0.8-1.5 t Weight: 70 KG Operating pressure: 88-117 bar Oil flow: 12-25 l/min Impact force: 180 J Hose connections: 3/8 inch Chisel diameter: 35 mm Chisel guide Scope of delivery: Operating instructions Spare parts list CE Declaration of Conformity 1x Pyramid Chisel Tool case Auction-ID: A1-47910-130
Platform dimensions: approx. 620 x 500 mm, hydraulic foot pump drive Auction-ID: A7-47533-145
Häner HX900 hydraulic breaker without mount; Weight class: 7-12 t; Operating pressure: 127-157 bar; Oil flow: 60-100 l/min.; Impact force: 1800 J; Hose Connectors: 3/4 in.; Chisel diameter: 85 mm; chisel guide bushed; Scope of delivery: operating instructions; Spare parts list; CE Declaration of Conformity Please note that the device shown is shown in RAL7021. The actual execution can also be done in RAL9005 Auction-ID: A1-47910-71
Weight class: 10-15 t; Operating pressure: 147-167 bar; Oil flow: 80-110 l/min.; Impact force: 2033 J; Hose Connectors: 3/4 in.; Chisel diameter: 100 mm; chisel guide bushed; Scope of delivery: operating instructions; Spare parts list; CE Declaration of Conformity; 1 pyramid chisel Please note that the device shown is shown in RAL7021. The actual execution can also be done in RAL9005 Auction-ID: A1-47910-81
On transport trolleys Auction-ID: A1-47842-504
With engine Olaer HMA2-90L-4 Auction-ID: A1-47842-402
Weight class: 6-9 t Operating pressure: 118-147 bar Oil flow: 50-90 l/min Impact force: 1450 J Hose connections: 1/2 inch Chisel diameter: 75 mm Chisel guide Scope of delivery: 1x Pyramid Chisel Operating instructions Spare parts list CE Declaration of Conformity Auction-ID: A1-47910-60
maximum number of results exceeded
please refine your search
250 € 
