hydraulic punching machine used for sale

Key data: 1250 mm, 4 mm

Max. cutting length: 1250 mm Max. sheet thickness: 4 mm steel Controlled backgauge Side stop and table extensions Cutting length limitation Cut edge lighting Light barrier to protect the rear area Knife sharpened Weight approx. 2800 kg

Key data: 30 t

DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...

Key data: 1 t

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 2200 mm   table surface (front-back): 1700 mm SLIDE   stroke: 1600 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1600 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6536 mm   space requirements -front/back-: 2923 mm   total height: 6135 mm   total weight approx.: 36000 kg

S03-C Mason, 7,5KW, 380V, Pump : Rexroth 1PV2V3-30/40 RA01MC 63A1 , 1/80. Hydr. Block for 4 valves, 2 4/3 directional valves, elek. , tank approx. 170lt., dimensions; 95 x 60 x 80cm Possibly also with bending tool, bending cylinder! See photos. Other units on request! See photos!

S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 xadjustable. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100bar or up to 400bar, oil cooler, hydraulic accumulator, engine 5.5 kw, 1400rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !

S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 xadjustable. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100bar or up to 400bar, oil cooler, hydraulic accumulator, engine 5.5 kw, 1400rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !

Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details.

CONTROLS    PNEUTRONIC CYBELEC STEUERUNG PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: no   feedstock transport direction: left to right SLIDE   total force (nominal): 400 to   stroke: 230 mm   stroke rate (max.): 35 /min SLIDE (HYDR. PRESS)   approximation velocity max.: 120 mm/s   working velocity min.: 5 mm/s   working velocity max.: 50 mm/s   return velocity max.: 135 mm/s COUNTER RAM   nominal force: 100 to   stroke: 40 mm V-RING   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1050 mm   lower table (front-back): 800 mm   upper table (left-right): 800 mm   upper table (front-back): 800 mm   shut height max.: 410 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 350 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   fee ...

DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-4

Slide size 810x610 mm Slide stroke 550 mm Worktop size 810x610 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-17

A hydraulic system, consisting of three identical power units and three identical hydraulic hammers including lines, is available. 1) 3x hydraulic power unit Atlas Copco LP 9-20 P, engine manufacturer: Honda, engine power: 6.7kW, fuel: gasoline, max. operating pressure: 150bar, return filter fineness: 25µm, machine dimensions X/Y/Z: approx. 650mm/550mm/650mm, weight: approx. 80kg. 2) 3x hydraulic, vibration-damped breakers Atlas Copco LH 190 E, year of manufacture: 2014, operating pressure range: 95bar-110bar, blow frequency: 1400/min, vibration value: approx. 5m/s², max. back pressure: 10bar, length: approx. 650mm, operating weight: 25kg. 3) Hydraulic hose lines. An on-site inspection is possible.

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking 2-year warranty Pressure 60 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 820 x 300 mm Installation height 900 mm Capacity per litre 6.0 l Speed from 5.4 mm/sec Speed to 8.3 mm/sec Motor power 3.0 kW Machine weight approx. 0.725 t Space requirements approx. 1.46 x 0.85 x 2.4 m Auction-ID: A7-46642-60

A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible.

Frame press, CE certified according to the latest guidelines. - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 20 t Stroke 180 mm Clear width between uprights 540 x 100 mm Installation height max. 990 mm Cylinder diameter 72 mm Piston diameter 48 mm Machine weight approx. 0.12 t Space requirement approx. 0.8 x 0.7 x 1.8 m Condition: never used / new (5) Auction-ID: A7-46642-166

High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking Pressure 100 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 1010 x 300 mm Motor power 4.0 kW Capacity per litre 11.0 l Installation height 900 mm Table surface 1010 x 560 mm Speed from 4.8 mm/sec Speed to 7.5 mm/sec Machine weight approx. 0.9 t Dimensions L x W x H 1550 x 900 x 245 mm Auction-ID: A7-46642-145

High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking Pressure 160 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 1100 /350 mm Installation height 900 mm Capacity per litre 15 l Speed from 6.2 mm/sec Speed to 9.8 mm/sec Motor power 5.5 kW Machine weight approx. 1.3 t Dimensions L x W x H 1.6 x 1.0 x 2.55 m Auction-ID: A7-46642-52

Overview Lot of pneumatic hydraulic jacks composed of several units in different colors (orange, red, white, blue), intended for professional use in the workshop. Technical details - Type: Pneumatic hydraulic jacks - Visible capacities: 25-50 ton - Design: Movable base with wheels - Handling: Vertical handle for movement - Connection: Compressed air inlet - Application: Lifting heavy vehicles (trucks, buses, industrial machinery) - Configuration: Mixed models and configurations (variable specifications depending on unit) Included Accessories - Not specified Status and location Used condition – presence of surface wear and rust due to use in the workshop – sold as is, without warranty. Auction-ID: A7-45941-14

Overview Industrial hydraulic power unit composed of steel oil tank with electric motor and hydraulic pump mounted on the top. Technical details - Type: Hydraulic Power Unit - Tank: Steel oil tank - Motor: Top-mounted electric - Pump: Integrated hydraulic pump - Instrumentation: Pressure gauge - Control: Manual control valve - Maintenance: Filling/breathing cap - Connections: Outlet for hydraulic hoses - Power supply: Three-phase industrial plug (3 phases) - Application: Industrial hydraulic systems and machinery Included Accessories - Not specified Status and location Used condition – sold as is, without warranty. Auction-ID: A7-45941-42

Overview Heavy-duty tow bar assembly with integrated hydraulics, suitable for heavy hauling and industrial applications. Technical details - Type: Industrial Tow Bar - System: Hydraulic (includes hoses and couplings) - Construction: High-strength steel - Mounting: Steel fixing brackets - Hitch: Towing eye - Safety: Set of safety chains - Connections: Hydraulic hoses and fittings included - Application: Pulling heavy machinery or equipment Included Accessories - Hydraulic hoses - Couplings and fittings - Safety chains Status and location Unknown condition – sold as is, without warranty. Auction-ID: A7-45941-36

Overview Heavy-duty tow bar assembly with integrated hydraulics, ideal for lighting on construction sites, workshops or outdoor use. Technical details - Type: Portable LED Work Light - Mounting: Adjustable tripod - Panels: Double adjustable LED panel - Brightness levels: 500 lm / 1500 lm / 5000 lm - Lighting: White light (cool and warm modes) - Power: Lithium battery (2x21770), 7.4V/4000mAh - Battery life: approx. 5h (low), 2.5h (medium), 1h (high) - Protection: IP22 - Input Voltage: 5V DC - Design: Adjustable, foldable and retractable for easy transport - Angle: Dimmable beam of light - Working temperature: -10°C to +40°C - Certifications: CE and RoHS Included Accessories - Transport box - Charger Status and location New or lightly used condition (boxed) – sold as-is, without warranty. Auction-ID: A7-45941-37

Overview Portable hydraulic group powered by gasoline engine, designed for mobile applications on site and industrial use. Technical details - Type: Portable Hydraulic Power Unit - Engine: Petrol (estimated 4–6 kW) - Starter: Manual by puller (recoil starter) - Frame: Protective steel frame - System: Hydraulic with hoses included - Connections: Quick couplings - Control: Panel with joysticks and safety signage - Noise level: 100 dB (according to label) - Application: Use in field, construction and mobile hydraulic machinery Included Accessories - Hydraulic hoses - Quick couplings Status and location Unknown condition – sold as is, without warranty. Auction-ID: A7-45941-43

Overview Lot of pneumatic hydraulic jacks composed of several units in different colors (orange, red, white, blue), intended for professional use in the workshop. Technical details - Type: Pneumatic hydraulic jacks - Visible capacities: 20T, 40T and 50T - Design: Movable base with wheels - Handling: Vertical handle for movement - Connection: Compressed air inlet - Application: Lifting heavy vehicles (trucks, buses, industrial machinery) - Configuration: Mixed models and configurations (variable specifications depending on unit) Included Accessories - Not specified Status and location Used condition – presence of surface wear and rust due to use in the workshop – sold as is, without warranty. Auction-ID: A7-45941-10

Press force: 1800kN, stroke: 300mm, strip width: 80-400mm, max. coil weight: 3t, system operating pressure: 250bar, pump drive power: 15kW. An inspection on site is possible.

Machine type: Hydraulic pump Manufacturer / Brand: Parker Model / Type: PV063R1K1T1NFPV Flow type: Variable flow Nominal pressure: 350 bar Maximum pressure: 420 bar Displacement: 63 cm³/rev Shaft diameter: 40 mm Speed range: 400 – 2800 rpm Coupling: Included Approx. weight: 60 kg Auction-ID: A7-46812-12

Brand: Parker Type: Hydraulic pump (variable displacement) Model: PV016R1K1T1NFPV Manufacturer: Parker Hannifin Origin: Germany Serial No.: 207670221001 Technical data: Nominal pressure: 350 bar Maximum pressure: 420 bar Displacement: 16 cm³/rev Shaft diameter: 25 mm Speed range: 400 – 2800 rpm Flow type: Variable Remarks: Coupling included. Used condition. Own mass: approx. 20 kg Auction-ID: A7-46812-14

Manufacturer: Parker Type: Hydraulic pump, variable displacement Model: PV046R1K1T1NFPV Series: PV Plus (PV) Nominal pressure: 350 bar Maximum pressure: 420 bar Displacement: 46 cm³/rev Speed range: 400 – 2800 rpm Shaft diameter: 32 mm Rotation direction: see arrow on housing Remarks: Variable flow hydraulic pump. Connections protected. Condition according to photos. Own mass: approx. 30 kg Dimensions (L×W×H): approx. 450 × 300 × 300 mm Auction-ID: A7-46812-13

A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement.

Key data: 250 t, 800 mm, 650 mm

LCM Taiwan, 250 tons hydraulic press Possible to inspect under power New in 2014 Table 800x800 mm Stroke 0-650 adjustable

Key data: 600 t, 800 mm, 650 mm

LCM Taiwan, 600 tons hydraulic press New in 12/2014 Table 800x800 mm Stroke 0-650 mm adjustable full specifications attached Possible to inspect under power

Key data: 400 t, 1000 mm

LAUFFER PRESSES hydraulic press model VA 400 Capacity 400 tons Table 700x1000 mm Possible to inspect under power

Key data: 300 t, 600 mm, 400 mm

OZKOC 300 tons hydraulic press monoblock frame New in 2025, almost new Table 600x600 mm Stroke 400 mm Possible to inspect under power

Key data: 300 t, 800 mm, 500 mm

HURSAN 300 tons hydraulic press Year of manufacturing 2021 Table 800x800 mm Stroke 500 mm Possible to inspect under power

Hydraulic veneer cutter MONGUZZI mod. 3200 used theoretical useful cut mm. 3200 nr. 2 motors installed power HP 10 Motorized rear guide with mechanical display Cutting height REER safety barrier (new) for finger detection - security level type 4 - Machine length mm. 4400 Weight kg. 3800 overhauled machine, in excellent condition CE compliant

throat: ca. 300 mm stroke: ca. 200 mm pressure capacity max.: 35 t die cushion hydr. pressure/stroke: 15 t total power requirement: 5,6 kW weight of the machine ca.: ca 2,5 t dimensions of the machine ca.: 1 x 0,9 x H 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll Embossing Machine Application area BORRIES roll embossing machines are used for embossing solid or hollow Round parts . With the appropriate fixtures and tools, even flat Workpieces and non-rotationally symmetrical components are marked With little effort, they are permanently high minting performance can be achieved. • Embossing depth easily adjustable. • Large workpiece throughput possible. • Adaptation to workpiece diameters and the setting of the embossing depth is the height adjustment of the machine table easily possible. • The built-in tolerance range protects Workpieces and tools. • Durable and sturdily built. • Standard unwinding devices • Optional special fixtures available. Auction-ID: A1-47017-29

LVD HST-C 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 12 > 50 str/min Adjustable cutting device: 0,05 > 0,8 Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 9,5 kW Length: 4110 mm Depth: 1820 mm Height: 1850 mm Weight: 5,5 ton Number of sheet holders: 21x

BA300 disconnectors with controllable pressure zones are designed to protect drinking water networks against depressions, back pressures Auction-ID: A1-47049-85

Haco ERMS 220 ton x 3100 mm CNC Capacity: 220 ton x 3100 mm Backgauge: CNC Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 18,7 kW Length: 3320 mm Depth: 2050 mm Height: 2800 mm Weight: 11,6 ton

BA300 disconnectors with controllable pressure zones are designed to protect drinking water networks against depressions, back pressures Auction-ID: A1-47049-86

Double pump hydraulic unit Auction-ID: A7-47065-7

Single pump hydraulic unit Auction-ID: A7-47065-19

YOM: 1995 serial number: 732335795 Auction-ID: A7-47065-21

Holder sprayer boom – 18 meters – hydraulically foldable Used Holder sprayer boom with 18 meter working width. The boom is hydraulically foldable and functional. Robust design for agricultural sprayers. Technical data: • Manufacturer: Holder • Working width: 18 m • Hydraulically foldable • Attachment boom for field sprayer Equipment: • Hydraulic folding function • Lighting and warning signs available • Spring-relieved boom guide • Several nozzle lines installed • Robust steel construction Condition / Notes: • Functional • Used condition with signs of use due to age and use • Corrosion and paint damage present • Condition and scope of delivery according to pictures Ideal as a replacement boom or for retrofitting existing field sprayers. Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com +49 151 5577121 ...

Hydr. Demolition hammer with Lehnhoff MS/HS08 mount, suitable for carrier devices 5.0-9.0T; used; #07PA0338; Dimensions: 1400mmx800mmx700mm Auction-ID: A7-47086-1

Manufacturer: Winter Model: VSP 350 Year of Manufacture: 2014 72015 Type of Machine :Column press Technical Specifications : - Plunger force can withstand 3500 kN - Maintain 50 mm plunger stroke - Piston force: 2500 kN - Piston stroke: 100 mm - Installation height of plunger at the top: 553 mm - Distance between columns 570 mm - Table-type pestle surface WD 392238 mm - Table height approx. 1100 mm - Overall height approx. 3250 mm - Overall width approx. 1290 mm - Total depth approx. 860 mm - Machine weight without oil: approx. 13000 kg - Oil filling DIN 51524-HLP 46 1150 l - Maintain working speed of 500 kN at approximately 30 mm/s - Maintain working speed of 3500 kN at approximately 4 mm/s - Maintain return stroke speed of approximately 60 mm/s - Working speed for cutting: 500 kN approx. 30 mm/s - Working speed for cutting: 2500 kN approx. 5 mm/s - Return stroke speed: approximatel ...

pressure: 30 t stroke: 300 mm daylight between the columns: 700 mm dayligth: 850 mm : 140 mm diameter of piston: 60 mm table surface area: 700 x 390 mm weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,2 x 0,8 x 2,2 m Workshop Press - Movable cylinder - 2 support prisms - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment: - With associated hydraulic power unit - Unit of measurement - Control cabinets Information: - Net weight: 28,000 kg - Hydraulic power unit: 2,000 kg - Total weight: 30,000 kg - Hammer price: without loading the machine

Auction-ID: A1-41277-278