hydraulic pump used for sale

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45834-228

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45833-26

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-45833-228

Hydraulic injection moulding machine manufactured in 2016. This Netstal Synergy 600-230 features a clamping force of 600 kN and an injection force of 182 kN. It has an operating pressure of 210 bar and an opening stroke of 0-350 mm. If you are looking to get high-quality injection moulding capabilities, consider the Netstal Synergy 600-230 machine we have for sale. Contact us for further details regarding this machine.

Key data: 1 t

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power

Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details.

throat: ca. 300 mm stroke: ca. 200 mm pressure capacity max.: 35 t die cushion hydr. pressure/stroke: 15 t total power requirement: 5,6 kW weight of the machine ca.: ca 2,5 t dimensions of the machine ca.: 1 x 0,9 x H 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

S03-C Mason, 7,5KW, 380V, Pump : Rexroth 1PV2V3-30/40 RA01MC 63A1 , 1/80. Hydr. Block for 4 valves, 2 4/3 directional valves, elek. , tank approx. 170lt., dimensions; 95 x 60 x 80cm Possibly also with bending tool, bending cylinder! See photos. Other units on request! See photos!

S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 xadjustable. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100bar or up to 400bar, oil cooler, hydraulic accumulator, engine 5.5 kw, 1400rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !

S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 xadjustable. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100bar or up to 400bar, oil cooler, hydraulic accumulator, engine 5.5 kw, 1400rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !

Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details.

CONTROLS   PLC SIEMENS PRESS DESIGN   drive system: hydraulic SLIDE   total force (nominal): 500 to   stroke: 225 mm   stroke rate (max.): 60 /min SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 15 mm/s   working velocity max.: 44 mm/s   return velocity max.: 200 mm/s COUNTER RAM   nominal force: 100 to   stroke: 30 mm V-RING   nominal force: 200 to TOOL DIMENSIONS   shut height max.: 420 mm   ram adjustment: 100 mm   distance between columns (H-frame): 880 mm   passline opening (free passage in side columns): 470 mm   range of transfer pins - in strip direction: 394 mm DECOILER   design: cradle   sheet width max.: 300 mm LEVELLER UNIT   sheet thickness max.: 12 mm STRIP-FEEDER   feeder type: grip feeder CROP SHEAR   cutting force: 500 kN ELECTRICAL SPECIFICATIONS   total power consumption: 100 kW Pres ...

Key data: 30 t

DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...

MAN TGS 33.540 6x4 BL – Truck with Loading Crane General data: Manufacturer: MAN Model: TGS 33.540 6x4 BL Serial number (VIN): WMA30SZZ9BM567249 Year of manufacture: Unknown Condition: Used Power: approx. 540 HP Drive: 6x4 Gross vehicle weight: approx. 26000 kg Dimensions (L x W x H): approx. 10000 x 2550 x 3800 mm Equipment: Hydraulic loading crane Crane: Kogel, 10 ton-meter, hydraulic telescopic arm + rotor + grab Reach: approx. 9 – 10 m Lifting capacity: approx. 3500 kg (close range) to 1000 kg (full extension) Maximum pulling force: 200 kN Trailer coupling Timber stakes for log transport Reinforced chassis Multi-axle configuration Description: Heavy-duty truck equipped with a hydraulic loading crane, designed for forestry, recycling, and construction applications. The vehicle allows self-loading and unloading of bulky materials such as logs, scrap, or ...

Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.

Table dimensions ( x-y/mm) 5000 x 2500 Slide Dimensions X-Y (mm) 5000 x 2500 Stroke (mm) 1500 Light at T.D.C.(mm) 2000 Shut Height (mm) 500 Accessories shock absorber Cushion number 2 Cushion Area (x-y/mm) 4000 x 1800

6\" Hydraulic pressure 4500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 640 x 240 x 155 mm; Approx. Weight: 48kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-91

4\" Hydraulic pressure 2500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 470 x 185 x 130 mm; Approx. Weight: 23kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-222

Compact mechanical/hydraulic vice, with face size: 101 x 48 mm, stroke: 0-125 mm, clamping force 36 kN (3528 kgf). Packaging size 600 x 220 x 180 mm. Item weight 27 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 600 x 210 x 250 mm; Approx. Weight: 27kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-38

3 UNITS/SETS OF ATT0012 PACKED TOGETHER. A SINGLE ATT0012 CORRESPONDS TO: 4\" Hydraulic pressure 2500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 470 x 185 x 130 mm; Approx. Weight: 23kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0012 PACKED TOGETHER: 470 x 555 x h130 mm - 69 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-72

6\" Hydraulic pressure 4500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 640 x 240 x 155 mm; Approx. Weight: 48kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-234

General overhauled, new seals etc. Auction-ID: A1-46315-42

This 5-axis DEMAG ERGOTECH CONCEPT 3000-1450 was manufactured in 2001. It features a clamping force of 3000 kN and a machine weight of 13.9 tonnes. With a maximum hydraulic pressure of 190 bar and a flow rate of 164 l/min, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH CONCEPT 3000-1450 hydraulic injection moulding machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5 full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine.

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 2200 mm   table surface (front-back): 1700 mm SLIDE   stroke: 1600 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1600 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6536 mm   space requirements -front/back-: 2923 mm   total height: 6135 mm   total weight approx.: 36000 kg

Hydraulic and pneumatic sole attaching press. Auction-ID: A7-46462-5

\" • Manufacturer Uzina de Strunguri Arad (Romania) • Type / Model SNA 560 x 1500 • Name Special machine based on SNA 560 x 1500 – Grinding/brushing machine with hydraulic tailstock • Description, accessories, condition Machine base SNA 560 x 1500, converted or used as a grinding and brushing machine. Version with: • Hydraulically retractable tailstock (cylinder retracting/extending) • Spindle motor • Hydraulic unit • Separate control panel • Additional grinding/brushing unit with protective cover and extraction connection • 3-jaw chuck • Several clamping or workpiece holders (see pictures) Machine was used for surface processing (grinding/brushing). Type: SNA 560 x 1500 Mains: 380 V Frequency: 50 Hz Voltage: 380 V Control voltage: 110 V Motor power: 10 kW Main fuse: 25 A Center width: 1500 mm • Dimensions in mm (LxWxH) approx. 3500 x 1400 x 1800 mm \" Auction- ...

\" Item: 4× hydraulic dial gauge holders / dial gauge tripods – different designs consist of four hydraulic dial gauge holders in different designs and sizes. The holders are used for the precise positioning of dial gauges, touch probes or test equipment in the measuring and production area. The lot includes different systems, some with magnetic base, some with a fixed clamping base. At least one holder is from FISSO (Swiss Made). • Quantity: 4 pieces • Type: hydraulic dial gauge holders / articulated arms • Versions: • with magnetic base (partially) • with mechanical clamping base • Lengths: different • Largest version: approx. 680 mm • Locking: hydraulic (central adjustment) • Dial gauge mount: standard clamp mounts (8 mm / dovetail depending on arm) • Manufacturer: • at least 1× FISSO (Swiss Made) • other manufacturers unknown \" Auction-ID: A7-46417-26 ...

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

According to photos, Auction-ID: A1-45666-16

According to photos, machine is no longer connected to the power and the liquids are emptied for transport. Documents are available electronically Auction-ID: A1-45666-5

According to photos, without tools, weight estimated Auction-ID: A1-45666-2

According to photos, without tools in the press, these are still being removed, machine is running and is on power Auction-ID: A1-45666-1

Machine used for creating decorative or functional creases on the shoe upper. Auction-ID: A7-46462-20

Sold with 3 tool cabinets (2 x 50/100/190 cm and 1 x 90/100/190 cm) with contents. Auction-ID: A1-46437-189

Youtube function video: https://youtube.com/shorts/D1vBDS6kQvo FEM3 mount, for forklifts with 2,500kg-5,000kg load capacity on pallet for loading into trucks FEM dimension 3A Fork length 135-200 cm Auction-ID: A1-45451-1108

Brand: Bramidan Type: X25 Machine: Vertical baler Press force: ± 25 tons Drive: Hydraulic Voltage: 400V (3-phase) Application: Carton/Plastic Extra info from labels Hydraulics/engine: Brand: Danitech Power: ± 4.0 – 4.8 kW Voltage: 230/400V Speed: ± 1430 rpm Auction-ID: A3-43524-11840

• 3-point suspension (agricultural tractor category) • Hydraulically swiveling (cylinders visible) • Hydraulic hoses available • Support foot present Auction-ID: A3-43524-12276

FEM3 mount, for forklifts with 2,500kg-5,000kg load capacity on pallet for loading into trucks FEM dimension 3A Fork length 135-200 mm Auction-ID: A1-45451-1103

These are new and still in their original packaging. Important: each filter has its certificate of conformity. Auction-ID: A3-43525-7040

These are new and still in their original packaging. Important: each filter has its certificate of conformity. Auction-ID: A3-43525-7039

Youtube function video: https://youtube.com/shorts/OBVDwbD3IUk FEM3 (approx. 50cm): Fits any forklift with a payload of 3,000-5,000kg Fork length: 120-200cm Auction-ID: A1-45451-1174

CONTROLS    PNEUTRONIC CYBELEC STEUERUNG PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: no   feedstock transport direction: left to right SLIDE   total force (nominal): 400 to   stroke: 230 mm   stroke rate (max.): 35 /min SLIDE (HYDR. PRESS)   approximation velocity max.: 120 mm/s   working velocity min.: 5 mm/s   working velocity max.: 50 mm/s   return velocity max.: 135 mm/s COUNTER RAM   nominal force: 100 to   stroke: 40 mm V-RING   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1050 mm   lower table (front-back): 800 mm   upper table (left-right): 800 mm   upper table (front-back): 800 mm   shut height max.: 410 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 350 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   fee ...

DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-4

Equipped with: demolition hammer, for crane of 25-30 tons, length hammer without axe 2.2m, no hoses or head plate available. Auction-ID: A1-40137-283

Auction-ID: A1-46501-2085

Slide size 810x610 mm Slide stroke 550 mm Worktop size 810x610 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-17

Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40418-195

Chisel diameter: 140 mm; Hose diameter: 1 inch; Working pressure: 200–240 bar; Oil flow: 160–200 L/min; Crusher weight: 1,875 kg; Stroke frequency 320–650 bpm; Unused Auction-ID: A1-40137-259

Miniloader powered with Kubota V1505 4 cylinder EURO5 diesel engine, water-cooled, 18.4KW, capacity 1,498 Liters, Advanced version; Hydraulics equipped with Rexroth plunger pump and Rexroth Travel motor, electronic control lever with soft operation and operation of multiple functions at the same time, Travel motor with 2 speed controls also operable on drive lever, LED work lights front and rear, Toyota adjustable and sprung seat with electronic sensor (switches off engine after 20 sec), Hydraulic quick couplings for adjusting parts (euro connection), Lifting capacity 850 - 1250kg, Hydraulic tank 32 liters, fuel tank 30 liters, machine weight 2570kg, dimensions 3000x1500x2200mm. Incl. excavator bucket, unused machine Auction-ID: A1-40418-12