128,437 used machines on RESALE, but how to find them? Machine Search
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 50 mm -Piston rod: 36 mm -Stroke: 580 mm -Total length when retracted: 820 mm -Total length extended: 1400 mm -Piston rod thread -Ideal for building a hydraulic press - universally applicable -Dimensions: 1040/220/H200 mm -Weight: 30 kg
Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg
Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools Quantity: 4 pieces -Clamping height: 95 mm Price: for 4 pieces -Weight: 10 kg
Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg
Hydraulic pressure switch -Type: TGL10952 -Adjustable: from 0 to 320 bar -Price: per piece -Number: 9 available -Weight: 0.5 kg
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg
Hydraulic filter -Type: HY13479 -Quantity: 10 available -Price: per piece -Weight: 0.5 kg/piece
Hydraulic filter -Type: RG 045/070/RE045G20B -Quantity: 3 available -Price: per piece -Weight: 0.5 kg/piece
Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -without: interchangeable jaws -Mouth size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg
sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...
hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg
FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...
For sale I offer a hydraulic spreader / lifting wedge from Holmatro with accessories. The hydraulic spreader is an unused Exhibit with slight traces of storage. Further condition please see the pictures. Details: Holmatro HVLV 16 S 2, wedge for vertical lifting Operating pressure: 720 bar Stroke: 20 mm Min. insertion opening: 9 mm 16 ton with spring retraction Shipping available for an extra charge. Hydraulic spreader is workshop tested and sold immediately ready for use with new UVV test and can be tested on site. Other accessories available on request. # Holmatro # Hydraulic spreader # Lifting wedge # Spreader
without battery Auction-ID: A7-45452-116
Nominal force 100 t Stroke - 250 mm motor 3 kW more info on request
Working width: 3000 mm Sheet thickness: 4 mm Projection: 100 mm Backgauge: 500 mm Drive power: 380 V, 7.5 kW Space requirement: 3400 x 1600 x 1700 mm Weight: 4500 kg
pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: - working width 4080 mm - max. cutting capacity St 40 6 mm - hydr. Cutting angle adjustment - man. Cutting gap adjustment - Stroke rate depending on cutting angle and cutting length approx. 20 - 25 per min - Backgauge with positioning control ELGO 10 - 1000 mm - Cutting length adjustment - 17 pcs. Hydraulic hold-downs - front angle stop - front support arms - Drive 400 V / 9 kW - Foot switch - Space requirement without support arms approx. W 4450 x H 1900 x D 2300 mm - Weight approx. 10500 kg
Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...
Auction-ID: A1-45793-120
equipped with scales Auction-ID: A1-45793-50
Construction: Entirely constructed of stainless steel Press is used for tenderizing red and white meats without weight loss. All juices are retained inside the meat even after processing. The machine is fast and efficient, with a productivity of 500 steaks per hour. The thickness of the processed meat can be infinitely adjusted in the range from 1 to 30 mm. Technical data: Motor 1.5 kW Height 850 mm Width 440 mM Length 800 mm
Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO
Specifications: - working width 4050 mm - max. cutting capacity St 40 6 mm - Cutting gap adjustment - Stroke rate depending on cutting length approx. 20 - 25 per min - Backgauge with positioning control ELGO 10 - 750 mm - Cutting length adjustment - Hydraulic hold-downs - front angle stop - front support arms can be moved laterally - Drive 400 V / 15 kW - Foot switch - Space requirement without support arms approx. W 4850 x H 2000 x D 2300 mm - Weight approx. 10800 kg
BOMAG BS 180 Grit Spreader for Roller / Grit Spreader Sprayer for Compactor, Grit Spreader & Hydraulic Arm, Year 2008
Used hydraulic power unit Radial piston pump BOSCH REXROTH Type: PR4-30/6.30-500RA01M01 WNR:R901088867 Q: approx. 8 l/min p max: 500 bar Engine 11 kW 1460 rpm 500V Tank: approx. 80 l Dimensions: approx. 1100 x 800 x 800 mm The hydraulic unit is supplied without oil. Changes and errors in the technical data, information and prices as well as prior sale reserved.
maximum number of results exceeded
please refine your search
300 € 
