hydraulic pump used for sale

SYDEX progressive cavity pump with Siemens 7.5 kW motor SYDEX industrial progressive cavity pump, complete with Siemens motorization and VAREMEC gearbox, mounted on pallet. Brand: SYDEX Pump (Italy) Type: 0522S.069 Year: 2019 Maximum pressure: 12 bar Speed: 307 rpm Weight: approx. 163 kg Engine: Siemens Power: 7.5 kW Type: Three Phase Speed: approx. 1470 rpm Protection: IP55 Reducer: VARMEC Complete set: pump + gearbox + motor Execution: Stainless steel body Tri-clamp fittings Suitable for viscous liquids, food products, sludge, etc. Auction-ID: A3-43519-33493

To be controlled via Wifi, Heating capacity (kW) 2.2, Power connection (kW) 0.53, COP value 4.15, Energy label A+, Maximum current connection (W) 3000, Nominal current (A) 2.9, Maximum current (A) 15, Power supply 220V ~ 50 Hz, Backup electric heating (W) 2000, Refrigerant R134a/1050g, Compressor Rotary/Panasonic, Net dimension (mm) Φ 620×2038, Package dimension (mm) 700 x 700 x 2090, Net weight (Kg) 130, Gross weight (Kg) 140, Noise (dB) 48, Water tank capacity (L) 300, Working temperature range (°C) -7 ~ 43 Auction-ID: A1-40106-103

ID3778 Schwing SP2800 D year/Baujahr 2010 approx. 2510 hours/hours 5 t Trailer-mounted concrete pump, maximum flow rate 112 m³/h, maximum delivery pressure 108 bar Trailer concrete pump, flow rate max. 112 cbm/h, delivery pressure max. 108 bar

Unchecked from practice Closure Auction-ID: A7-46327-64

ID3779 Putzmeister P715 D year/Baujahr 2015 approx. 1540 hours/hours 1.8 t Concrete pump with diesel engine; the P 715 reliably delivers pumpable materials up to 16 mm in size over long distances; high-pressure pump with a delivery pressure of up to 68 bar and a flow rate of 18 m³/h, including a Morath concrete spraying unit Concrete pump, with diesel engine, the P 715 delivers pumpable media up to 16 mm reliably over long distances, power pump with up to 68 bar delivery pressure and 18 m3/h, incl. concrete spraying unit Morath

To be controlled via Wifi, Heating capacity (kW) 2.2, Power connection (kW) 0.53, COP value 4.15, Energy label A+, Maximum current connection (W) 3000, Nominal current (A) 2.9, Maximum current (A) 15, Power supply 220V ~ 50 Hz, Backup electric heating (W) 2000, Refrigerant R134a/1050g, Compressor Rotary/Panasonic, Net dimension (mm) Φ 620×1638, Package dimension (mm) 700 x 700 x 1690, Net weight (Kg) 105, Gross weight (Kg) 115, Noise (dB) 48, Water tank capacity (L) 200, Working temperature range (°C) -7 ~ 43 Auction-ID: A1-40106-104

mounted on wheeled bracket; equipped with supply and discharge hose; equipped with various filters; Auction-ID: A1-43992-244

230 - 400 Volts; Auction-ID: A1-43992-249

SKF / Lincoln - Batch of chains & pumps & technical parts Condition: unused Auction-ID: A1-46070-205

Grundfos - LP 100-200/191 - electric circulation pump 1x Auction-ID: A1-46070-186

Promix 2KE multi-component dosing device with pump; electronic dosing and mixing system for two-component materials; suitable for industrial applications such as paint and coating systems; equipped with adjustable mixing ratio; equipped with pump and control module; system for automatic dosing, mixing and processing of materials; Equipped with connections and components Auction-ID: A1-45170-9

SKF - VKPC 57676 - Batch of water pumps Condition: unused Auction-ID: A1-46070-35

SKF - Batch of car parts including water pumps Auction-ID: A1-46070-347

Grundfos - LF 100-200/183 - industrial water pump 1x Auction-ID: A1-46070-349

Grundfos - LP 100-200/191 - industrial water pump 1x Condition: Used Auction-ID: A1-46070-275

Grundfos - MG180MB2 - pump with electric motor 22 kW Auction-ID: A1-46070-114

Grundfos - LP100 centrifugal pump with accessories Auction-ID: A1-46070-3

Brand: W.O.S.; Type: Vacuum set complete; Engine: Hatz diesel engine; Start: Electric and manual start; Vacuum pump: Busch R5; Application: Vacuum lifting system for pipes and heavy elements; Composition: Vacuum unit with suction cup(s); Tested and working; 212 operating hours Auction-ID: A1-45170-2

Lincoln - Batch AirCare combination units and stub pump tubes Auction-ID: A1-46070-31

SMC - Batch Pneumatic Couplings Condition: unused Auction-ID: A1-46070-242

SKF - VKPC 83259 CL - Batch of water pumps Auction-ID: A1-46070-163

SKF - Batch of automotive parts - drive shafts, bearings and pumps 135KG Auction-ID: A1-46070-131

Auction-ID: A1-46070-154

SKF - VKPC 83259 C - Batch of water pumps Auction-ID: A1-46070-259

SKF - VKPC 57676 - Batch of water pumps Auction-ID: A1-46070-137

SKF - VKPC 81407 - Batch of water pumps Condition: unused Auction-ID: A1-46070-182

Stock# U2473-3 Used bi-wing /lobe pump by Pomac (NL) model PLP 3-3. Contact parts designed in stainless steel (316L). Pump has horizontal location of inlet and outlet, each with diameter 76 mm / 3". Output up to 1 l per rotation of rotors. Maximal output up to 45 m3/h, with maximal rotation of lobes up to 750 rpm. Working pressure up to 15 bar. Currently pump is equipped with Lenze GST06-2M-VBR-100C32 drive, with el motor 3 kW, 230-400 V, 50 Hz. Working rotation of lobes up to 145 rpm, working pressure up to 6 bar. On current drive pump can reach output up to 7 m3/h. Pump is mounted on stainless steel plate.

Hydraulic power unit BOSCH REXROTH Year of construction approx. 1970Operating pressure Nominal capacity: 50 barOperating pressure: max. 70 barVolume flow: approx. 40 litres/min. Tank capacity: 240 litresEngine power: 4 kWNee connection: 380 volts, 50 Hz- 1x electric hydraulic valve BOSCHPlating requirement length: 1020 mm, width: 610 mm height: 1000 mmown weight: approx. 170 kg; used

Hydraulic Power Unit, Hydraulic Power Unit BOSCH REXROTH Order No: 983885 Year of Manufacture 1982Tank Capacity: 150 LitresOperating Pressure: 60 bar Nominal Pressure / Max. 100 barVolume Flow: 20 Litres/min. Motor power pump : 3 kWNetz connection: 380 volts, 50 Hz.- 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type 4WE10D10OFLG24NZ4- 1 piece pressure accumulator- various throttle valves, pressure regulators and

Hydraulics Machine viseJaw width: 130 mmJaw height: 46 mmClamping force: 4 ton. Clamping range: 0 to 220 mmOpening width: max 223 mmGuideway height: 72 mm- 3 clamping ranges adjustable via plug-in pins, 0 to 79mm, 67 to 151 mm and 139 to 223 mmDimensions L x W x H: 535 x 210 x 119 mmWeight: 35 kgvery good condition; used

Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SOFabr. No: 124984 year of construction 2017Load capacity 300 kgPlatform size 1250 x 800 mmUsable stroke max. 785 mmOverall height - table bottom 345 mmOverall height - table top 1130 mmEngine power 0.8 kWNet connection 400 volts, 50 Hz- Foot switch for up and down, with emergency stop and key switch for control One- Single scissors with a lifting cylinder- Circumferential safety contact strip with limit switches under the upper frame- Adjustable limit switch for the upper stroke restriction-

Hydraulic workshop press manually operated, 20 ton pressure capacity Auction-ID: A3-43515-46

table 500/600 mm

Hydraulic

AMOB MAH 60/3 Section: 20 cm ³ Power: 5.5 kW - 7 hp Rpm: 11 rpm Ø instrument: 170/108 mm Ø shaft: 55/55 mm Weight: 600 kg Dimensions: 1300x890x1550 mm Nr. 3 motorized rollers hydraulic adjustment top roller Side guide rollers Programmable and displayed top roller Horizontal and vertical working position Pedal with safety device start/stop General information: The AMOB MAH series top roll profile hydraulic bending machines are the backbone of the widest selection of profile curves in the world. The MAH series is perfect for those applications that require multiple passes, where repeatability is paramount. Motorized 3-roller machines are suitable for narrower spokes and minimize material marking. Both horizontal and vertical working positions ensure that, even in the smallest workspaces, a mah series profiling machine will be placed. T ...

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

used hydraulic unit with accumulator

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

Hydraulic pressure filter, 200bar, 34P-0014, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0014 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude  ...

Hydraulic pressure filter, 200bar, 34P-0016, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0016 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclud ...

7.5 KW

Hydraulic pump 250 BAR 1, 1kW three phase motor, 3ccm/& 8 l container with valves and tray, ready for use. Info under 0170 / 2204056 Mail to fa.raupp@t-online

ULTRAPRAS UPV100TT SPECIAL hydraulic press built in 2022 Poland is the perfect choice for a range of demanding cold metal forming operations. This highly efficient and versatile machine can perform such operations as precision bending, profiling, flattening, bending, hole punching and stamping. Inside the robust design, there is a power unit-powered hydraulic piston with a diameter of 220 mm, which performs all these machining processes with a high press force of 100 tonnes. In addition, the entire working area is protected by light curtains, thanks to which the UltraPras four-column press also offers a high level of operational safety. During its service life, the machine has operated for just 595 hours and completed a total of 37042 work cycles. The UPV 100 TT SPECJAL 100t hydraulic press weighs 6500 kg. Technical specifications of the ULTRAPRAS UPV100TT SPECIAL press - maximum pre ...

Sell used hydraulic power units 5. 3 with 11 kW electric motor- 2 with 4 kW electric motor- Price per PCs. Motors from ASEA Sweden

Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile gebrauchte Hydraulikmotoren Danffos OMR OMS OMT OMTS OMV used Danfoss OMR OMS OMT OMS OMV hydraulic motors used hydraulic motors Danffos OMR OMS OMT OMTS OMV 151-0208 125 OMR OMS OMT OMTS OMV 151-0242 80 OMR OMS OMT OMTS OMV 151-0243 100 OMR OMS OMT OMTS OMV 151-0244 160 OMR OMS OMT OMTS OMV 151-0245 200 OMR OMS OMT OMTS OMV 151-0246 315 OMR OMS OMT OMTS OMV 151-0247 250 OMR OMS OMT OMTS OMV 151-0248 50 OMR OMS OMT OMTS OMV 151-0265 50 OMR OMS OMT OMTS OMV 151-0266 80 OMR OMS OMT OMTS OMV 151-0267 100 OMR OMS OMT OMTS OMV 151-0268 160 OMR OMS OMT OMTS OMV 151-0270 315 OMR OMS OMT OMTS OMV 151-0271 250 OMR OMS OMT OMTS OMV 151-0297 315 OMR OMS OMT OMTS OMV 151-04 ...