hydraulic pressbrake used for sale

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 600 mm -Type: C-3LRLS29MC -Piston rod: Ø 88 mm -Admission: shaft Ø 25/10 mm -Piston: Ø 127 mm -Pmax: 100 bar -Dimensions: 1070/210 / H140 mm -Weight: 66 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 40 mm, M16 x 2 -Stroke: 660 mm -Total length: retracted 805 mm -Hole: Cylinder: Ø 40 mm -Price per piece -Quantity: 2 pieces -Dimensions: 805/155/H95mm -Weight: 19 kg/piece

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Manufacturer: Linde, hydraulic line PV/22 TA-No: 1/2193046 -Art.Nr.: 3794401507 -Price: per piece -Number: 2 piece -Dimensions: 640/220/H30 mm -Weight: 0.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting -Piston rod: Ø 40 mm, M16 x 2 -Stroke: 710 mm -Total length: retracted 850 mm -Hole: Cylinder: Ø 40 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 850/156/H110mm -Weight: 19 kg/piece

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Drive motor: Ziehl-Abegg type HYDT.132,28-4 -Motor: 11 kW 1420 rpm -Dimensions: 1300/400/H820 mm -Weight: 270 kg

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Handover: as is -Chuck size: Ø 200 mm -Bolt circle: Ø 134 mm -Weight: 20.7 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Unit comes from: grinding machine WERKO SKSt 200 -Motor: VEM type KMR 56 G 4 -Pump: 220/380 V/1360 rpm/0.18 kW -Dimensions: 470/570/H445 mm -Weight: 88 kg

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 30 mm - Piston rod: Ø 30 mm -Mounting holes: Ø25 x 70 mm / Ø13 x 10/16/10 mm -Cylinder: outside Ø 90 mm -Number: 2x cylinders available -Price per piece -Dimensions: 390/140 / H100 mm -Weight: 9.7 kg

hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulic machine vice -Jaw width: 125 x 45 mm -Clamping depth: 150 mm -Dimensions: 430/210/H110 mm -Weight: 30.5 kg

sheet width: 3200 mm plate thickness: 6 mm distance between columns: 3200 mm throat: mm back stop - adjustable: 20 - 600 mm down holder: dimensions: ca. 4010 x 1610 x 1620 mm engine output: 7,5 kW Control: eView weight of the machine ca.: 7,2 t CNC swing cut panel shears 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 100 mm -Piston rod: Ø 45 mm -Stroke: 620 mm -Universally applicable: -Quantity: 1 available -Price: per piece -Dimensions: 905/140/H160 mm -Weight: 45 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Gearbox type: SK 20F-100 L/4 -Speed: 120 rpm -Drive motor: Nord -Hydraulic pump: unknown -Dimensions: 900/320/H300 mm -Weight: 119 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: Schorch 1.5 kW 1405 rpm -Sale: in the current condition as seen -Dimensions: 490/340/H585 mm -Weight: 46 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm -Piston rod: Ø 36 mm -Stroke: 100 mm -universally applicable: -Number: 2x available -Price: per piece -Dimensions: 415/120/H110 mm -Weight: 14 kg

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Power: 0.22 kW 1350 rpm -Protection class: -Pump output: adjustable -Number: 1x pumps available -Price: per piece -Dimensions: 390/170/H185 mm -Weight: 15 kg

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 18 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 130/248 mm -Weight: 14.7 kg/piece

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 16 mm -Price: per piece -Number: 1x available -Dimensions: 160/160/H179 mm -Weight: 7.7 kg

Hydraulic pump, oil pump, gear pump -Shaft mount: Ø 14 mm -Quantity: 1 piece available -Dimensions: Ø 115/190 mm -Weight: 3.7kg

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 15 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 125/230 mm -Weight: 11.7 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Hydraulic cylinder: tilt cylinder -Stroke: 135 mm -Piston rod: Ø 126 mm / mount Ø70 mm -Cylinder: outer Ø 155 mm -Hole: Ø 50 mm / Dimensions see photo technical drawing -Dimensions: 365/260/H175 mm -Weight: 39 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: double-acting, stroke 100 mm -Piston rod: Ø 56 mm -Cylinder: outside Ø 95 mm -Dimensions: Ø 200 x 370 mm -Weight: 23 kg

Hydraulic press 1500 tons. Clearance between the two side pistons = 1400 mm. Clearance between uprights = 400 mm. Vertical clearance between open boards 3200 mm. Moving table dimensions = 1700 x 1800 mm. Fixed table size = 1500 x 2000 mm. This press has been used to produce forks for forklift.

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 850 mm -Type: C-M1144 -Piston rod: Ø 18 mm -Cylinder: outside Ø 35 mm -Number: 2x cylinders available -Price per piece -Dimensions: 984/70 / H50 mm -Weight: 6.5 kg / pc.

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder, stroke 85 mm -Piston rod: approx. Ø 50 mm -Cylinder: outside Ø 80/70 mm -Socket: Ø 36 mm -Dimensions: 1015/120 / H100 mm -Weight: 17 kg

Hydraulic Shear COMESSA CP 316 Capacity: 3000 x 16 mm Back gear gauge travel: 1000 mm Throat depth: 500 mm Motor power: 35 CV Adjustable blades 4 cutting blade Voltage: 380 V Dimensions (L x W x H): 3500 x 2200 x 2400 mm Weight: 16,5 T

table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double hydraulic pump, oil pump, gear pump -Kracht: gear feed pump -without: drive -with: clutch bell for the drive -Dimensions: 490/250/H345 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 250 mm -Cone: Ø 94 mm -Thread: M20 -Gradient: 2.5 mm -Weight: 33.3 kg

Hydraulic vice, machine vice, hydraulic vice, drilling machine vice -Jaw width: 125 x 45 mm -Clamping depth: 225 mm -Machine vice: rotatable -Dimensions: 430/300/H140 mm -Weight: 44 kg

Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

Key data: 700 bar, 3 kW

Hytorc High Pressure Hydraulic Pump 700bar, 400V, 3kW with Test Certificate High Pressure Hydraulic Pump Manufacturer: Hytorc Seis GmbH Type JetPro 18.3-4T with integrated, electrically ventilated hydraulic oil cooler. Printed test certificate from 2018, then no longer in use! The hydraulic power unit was used to transport turbine shafts weighing several tons to a hydraulic oil cushion to rotate smoothly and easily. For example, turbine shafts were tested for concentricity and damage. The article is available multiple times.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers -OLEO hydraulic buffer -Type: 21 - M FS - 100 -Stroke: 150mm -Piston rod: Ø 76mm -Dimensions: 151/151/H584 mm -Quantity: 3 pieces of hydraulic buffers available -Price per piece -Weight: 18kg

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

Key data: 10 t, 300 mm, 300 mm

more info on request

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Pump max.pressure: approx. 60 bar -Pump max. Liter output: 14 l/min -1x drive: 1.5 kW 2850 rpm -Hydraulic filter -Hydraulic tank -Control valve -Dimensions: 740/370/H1160 mm -Weight: 120 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder for pedestrian stacker make: OMG type 214EA -Piston: Ø 32 mm -Piston rod: Ø 20 mm -Stroke: 150 mm -Max. Pressure: 300 bar -Dimensions: Ø 92/390 mm -Weight: 5.2 kg

Sight glass, inline sight glasses, disc valve, butterfly valve, ball valve -Sight glass: 805 x 25 mm -Dimensions: 930/58/H52 mm -Weight: 15 kg

Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg