135,484 used machines on RESALE, but how to find them? Machine Search
used
Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 1600 MT Built: 1996 Billet dia.: 6”, 157 x 560 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 110 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 75 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016
Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 900 MT Built: 2007 Billet dia.: 5”, 127 x 390 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 90 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 7 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016
HYDRAULIC PUNCHING PRESS Inv. No. 13.085P1 Make SAHINLER Model HKM40 Capacity 40 Ton Punching Ø 20 in 15mm Stroke 50 mm Radius 175 mm Round cutting 30 mm Square cutting 25 mm Angle bar 80 x 80 x 8 mm Flat bar 200 x 13 mm 300 x 6 mm Blade length 356 mm Motor power 3 KW Weight 580 Kg Auction-ID: A1-50718-39
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-50718-64
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-50718-63
Weight 10 kg, incl. clamping inserts 6, 8, 10, 12 and 16 Auction-ID: A1-50626-12
De Ryck tandem axle tipper, built in 2026. Equipped with 2 axles and a maximum weight of up to 3,500 kg. Features hydraulic tipping body, electro-hydraulic OMFB 12 V / 2,000 W pump unit, own battery and wired keyed controls for lifting and lowering the body. Equipped with KNOTT overrun brake, jockey wheel, handbrake, safety cable and galvanized chassis. Open cargo box with raised front rack. See photos and video(s) for a further impression of the execution, operation and condition. Auction-ID: A3-46136-22063
MAN TGM 18.290 4x2 truck from 2010, equipped with open body with folding side boards and hydraulically operated ramps at the rear. Equipped with a 6,871 cc diesel engine with an output of 213 kW (approx. 290 hp), Euro 5 emission class and sleeper cab. Odometer reading at recording: 637,466 km. Own weight approximately 7,780 kg and maximum permitted mass 19,000 kg. Equipped with spare wheel and roof hatch. Belgian vehicle documents available. Inspection certificate valid until 08/07/2026. Vehicle starts, drives and brakes. The operation of the hydraulic ramps can be seen in the video. Auction-ID: A3-46136-22122
The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with hydraulic power unit. Power supply: 400 V, three-phase. Motor power (per nameplate): 2.5 HP. Control system: Electrical cabinet with Siemens LOGO! mini PLC. Weight (per nameplate): 1,500 kg.
The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with a built-in 15-ton hydraulic power unit. Operating mode: semi-automatic. Power supply: 400 V, three-phase, 50 Hz. Motor power: 4 kW. Controls: digital pressure regulation; downward, upward, and rapid traverse movements. Weight (per nameplate): 700 kg. According to the section of the manual covering intended use, this configuration is designed for compressing filters with a diameter of 210 mm and a height of 1,090 mm.
Hydraulic Marine Fishing Net / Rope Winch Heavy-duty hydraulically driven marine winch suitable for hauling and handling fishing nets, ropes, lines and aquaculture equipment. The unit is equipped with a large horizontal drum, hydraulic motor, directional control valve and structural steel frame. Machine type: Hydraulic marine fishing winch Drive: Hydraulic motor Drum: Horizontal winding drum loaded with steel wire rope Controls: Manual directional control valve and handwheel-operated mechanism Hydraulic hoses: EN 853 1SN, WP 105 bar Features: Reduction gearing, hydraulic hoses, guide/bollard posts and steel support frame Approximate dimensions: 1,500 x 1,100 x 1,300 mm Approximate weight: 750 kg The winch is offered in used condition with visible corrosion on the drum flanges, wire rope and internal components. The frame appears structurally substantial and has b ...
- Includes: - 1 x OLEOMEC hydraulic power unit: 3 KW-1430 rpm motor, maximum pressure 100 Bars. - 1 x OLEOMEC hydraulic power unit: 4 KW-2850 rpm motor, maximum pressure 100 Bars. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-58
Hydro-Pack Hydraulic Pump/Motor Units with Parker Hydraulic Component Separate lot of used hydraulic components comprising approximately three Hydro-Pack hydraulic pump/motor units, a Parker hydraulic unit and one mechanical hydraulic control/drive assembly marked HIDRAULIKA”. Hydro-Pack code: P10100SF131 Hydro-Pack serial numbers: 24.01.647636 and 22.23.97423 Quantity: Approximately 3 hydraulic pump/motor units, 1 Parker hydraulic unit and 1 Hidraulika control/drive assembly Hydro-Pack features: Splined shafts, threaded hydraulic ports and mounting flanges Additional components: Associated shafts and couplings may be included Approximate dimensions of main unit: 450 x 280 x 300 mm Approximate weight of main unit: 35 kg The components are offered in used condition after outdoor storage. The Hydro-Pack housings appear intact, with identification plates, capped por ...
Lot of Three Hydraulic Drive Components Lot comprising three heavy industrial hydraulic drive components with cast housings, hydraulic ports, control sections and splined shafts. Quantity: 3 units Identified manufacturer: Mekior / Hidro-Bat Identified model: 6R070MHP/20 Additional marking: C8C/3C00 Serial number: MHP000121 Additional number: 201129897 Configuration: Hydraulic motor/drive component with splined shaft Condition: Used, untested, suitable for repair or parts Approximate dimensions: 600 × 400 × 450 mm Approximate weight: 110 kg The components show surface oxidation, paint deterioration and storage wear. Shaft areas have been protected with tape, while several hydraulic ports and interfaces are exposed. The main housings appear intact, but internal hydraulic condition, pressure performance and serviceability have not been verified. Auction-ID: A ...
Robust MAN M18 F truck equipped with a hydraulic tipper / container lift system, sold with its blue metal open tipper. A professional configuration suitable for construction sites, earthmoving, demolition, public works, material transport or waste disposal. Features: First put into service: 10/12/1990 Diesel Manual gearbox Mileage displayed: approx. 540,862 km 2 axles – 4x2 configuration 1 drive axle Mechanical suspension 2 seats Unladen weight: 9,280 kg MMA: 18,300 kg Calculated payload: approx. 9,020 kg Train MMA: 32,000 kg WINE: WMAM052454M120653 Open body included Hydraulic lifting/handling system Multiple hydraulic controls Side Trunks Work lights Belgian registration The vehicle is accompanied by its Belgian documents: registration certificate, certificate of conformity and technical inspection documents. Technical inspection valid until 29/10/2026. The ...
Heavy-Duty Hydraulic Trawl Winch Used marine trawl winch suitable for deploying, retrieving and controlling trawl gear and steel wire rope. The winch is equipped with a large steel wire-rope drum, hydraulic drive, chain-and-sprocket transmission and level-wind mechanism. Machine type: Hydraulic marine trawl winch Drive: Hydraulic motor and gear drive Drum: Large steel drum with steel wire rope Transmission: Chain-and-sprocket drive Level wind: Grooved traversing screw with guide rollers Additional equipment: Bronze-alloy warping head and manual control/locking levers Construction: Fabricated steel side frames and base Approximate dimensions: 2,200 x 1,600 x 1,700 mm Approximate weight: 1,800 kg The winch is offered in used condition with extensive corrosion on the wire rope, shafts, chain drive, fasteners and hydraulic components. The wire rope, hydraulic drive ...
\" ELMALI EHSP-150 Hydraulic Deep Drawing Press Manufacturer: Elmali Makina Sanayi ve Ticaret Ltd. Sti. Model: EHSP-150 Machine type: Hydraulic Deep Drawing Press Year: 2021 Serial number: EHSP-150/150 S.01 Certification: CE compliant Working hours: 0 h Heavy-duty hydraulic press designed for deep drawing, stamping and forming of sheet metal. The machine is reported as never used, with 0 working hours. Equipped with ELMALI touchscreen control, separate control cabinet and remote operator station. Technical specifications: Press force: 150 tons Motor power: 30 kW Table / ram dimensions: 1,000 × 1,200 mm Stroke: 600 / 250 mm Hydraulic oil: ISO VG 46 Approx. dimensions (L × W × H): 2,200 × 1,900 × 4,300 mm Machine weight: Approx. 10,500 kg Equipment: ELMALI PLC touchscreen control Separate operator control cabinet Remote operating station Hydraulic po ...
Used heavy-duty heated press for woodworking applications, suitable for gluing, veneering and pressing of wood and wood-based panels. Robust industrial construction with heated platens for even distribution of temperature and pressure. Ideal for professional joinery workshops and furniture production. Features: - Heated operation - Useful working size: 3000 x 1300 mm - Heavy-duty construction - Suitable for woodworking applications - Used - fully operational Brand, press force, number of cylinders, electrical connection and further technical specifications are not confirmed for this specific unit - please contact us for details. Used, fully operational Auction-ID: A7-50988-33
Used hydraulic press. Condition: Used, in working condition Auction-ID: A7-50988-149
Compact mechanical/hydraulic vice, with face size: 101 x 48 mm, stroke: 0-125 mm, clamping force 36 kN (3528 kgf). Packaging size 600 x 220 x 180 mm. Item weight 27 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 600 x 210 x 250 mm; Approx. Weight: 27kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-101
Stroke 50 mm, max opening 200 mm, never used Overall dimensions: 400 x 200 x 150 mm Weight: 5 kg Auction-ID: A7-50798-244
Fassi F115A.0.23 E-ACTIVE Hydraulic Knuckle-Boom Crane Used Fassi articulating hydraulic loader crane suitable for lifting, positioning and handling loads. The crane is equipped with multiple hydraulic boom sections, hydraulic cylinders, electronic controls, radio remote control and attached hydraulic hoses. Manufacturer: Fassi Gru S.p.A. Model: F115A.0.23 E-ACTIVE Year of manufacture: 2019 Serial number: 1503-2196 Electrical system: 24 V Crane type: Hydraulic articulating / knuckle-boom crane Controls: Fassi electronic control system and fixed control panel Remote control: Fassi radio remote handset with display and emergency stop Approximate dimensions: 4,200 x 1,500 x 2,100 mm Approximate weight: 1,300 kg The crane is offered in used condition with surface corrosion, paint deterioration and wear around fittings, pins and exposed components. The crane has b ...
Manufacturer: Hydraram Model: TSR-2W Year of construction: 2026 Serial Number: 26TSR2-93 Hydraulic sorting grab for mini excavator Suitable for carrier devices of 1–2 t Net weight: 95 kg Max. operating pressure: 210 bar Oil requirement opening/closing: 15 l/min Sturdy steel construction 360° hydraulically rotatable Hydraulic hoses included Very good optical condition Fully functional No noticeable weld repairs or structural damage Ideal for sorting, demolition, gardening and landscaping work, as well as wood, stone and recycled material CE marked Sale is made as shown in the pictures Technical data: Manufacturer: Hydraram Type: TSR-2W Year of construction: 2026 Weight: 95 kg Operating pressure: max. 210 bar Oil volume gripper: 15 l/min Application: Mini excavator 1–2 t Scope of delivery: 1 × Hydraram TSR-2W Sorting ...
Stroke 50 mm, max opening 200 mm, never used Overall dimensions: 400 x 200 x 150 mm Weight: 5 kg Auction-ID: A7-50798-124
Used hydraulic scissor lifting platform EYHER 2-7.5-1, 2000 kg capacity, 1240 mm. The machine has been inspected by our specialised technical department, meets all safety requirements and is offered with a 1-year warranty. EYHER S.L. is a Spanish manufacturer of hydraulic scissor-type lifting platforms (single, double or triple scissor). Safety features include a lowering lock system in case of hose rupture, a safety frame, chrome-plated piston rods and self-lubricating bearings with upper/lower limit switches. External dimensions: length 200 cm, width 70 cm, height 49 cm closed - 120 cm raised. The work table is 5 mm sheet steel. Lifting capacity 2000 kg up to a height of 120 cm. Hydraulic lifting system driven by a 380 V electric motor. Extra removable steel plate with sliding rollers: thickness 2 cm, length 190 cm, width 70 cm. Auction-ID: A7-50988-120
De Ryck double-axle tipper/box trailer with a maximum permitted mass of 2,700 kg. Equipped with 2 axles with a permissible axle load of 1,350 kg per axle and a maximum nose weight of 120 kg. Equipped with electro-hydraulic tipping installation, 12 V hydraulic unit of 1,600 W and wired control for lifting and lowering the body. Galvanized chassis, support wheel and overrun brake present. Chassis number: YA922G270N0130155. Operation of the tipping system visible on the video. Auction-ID: A3-46136-22069
Technical data Manufacturer: Mustang Model: RH15 Device Type: Hydraulic Rotary Pulverizer / Demolition Pliers Year of construction: 2026 Serial number: AH260213 CE marking: Yes Net weight: 1,050 kg Working pressure: 250 bar Required oil flow: 110 l/min Suitable for excavators: approx. 15–20 t operating weight Color: Anthracite / Black Application: Demolition, concrete recycling, dismantling and sorting work Facilities Hydraulic rotator Sturdy steel construction Replaceable wear teeth Solid bearing and bolt design High-quality industrial painting Ready to use CE compliant design Condition Mint Unused No noticeable welding repairs No visible oil leaks Cutting edges and teeth without significant wear Storage and transport traces possible Scope of Delivery 1 × Mustang RH15 rotary pulverizer Delivery as sh ...
Hydraulic demolition hammer for use on excavators in the medium weight class. The hammer is in a used condition appropriate to its age and use and is suitable for demolition, earthworks, road construction and general chiseling work. The housing makes a robust impression and has no noticeable cracks or weld repairs. The chisel still has a good remaining length, and hydraulic hoses with couplings and the tool retaining bolt are already mounted. Due to its solid construction, the hammer is suitable for a wide range of applications in civil engineering and demolition. Equipment: · Hydraulic Demolition Hammer · Chisel mounted with good remaining length · Hydraulic hoses including couplings · Tool retaining bolt and latch available · Pick-up plate for excavator available · Robust steel construction Notes: · Manufacturer and model not known · Nameplate not present or ille ...
Manufacturer: Elephant Attachments Model: JXJMQC320-N Item Type: Hydraulic Excavator Grapple / Excavator Grapple Year of construction: 2025 Date of manufacture: 16/10/2025 Serial number: 2508110654 CE marking available Suitable for excavators with an operating weight of 18–24 t Opening width: 79\" (approx. 2,007 mm) Width: 44\" (approx. 1,118 mm) Net weight: approx. 1,196 kg (2,637 lb) Sturdy steel construction for professional use Serrated gripping trays for a secure hold of wood, stones, demolition material and bulk materials Suitable for demolition, recycling, forestry, gardening and landscaping as well as earthworks and civil engineering Solid bearings and stable bolt design Delivery as shown in the pictures Nameplate available Condition Mint or unused condition Visually very well maintained No noticeable weld repairs or deformations ...
Hydraulic single-column press with 25 t pressing force and 4 kW drive power. Machines are generally offered without documentation. If documents are available, they will be attached to the respective machine.
HUMARD 001-001/84 ist eine Hydraulische Presse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitswerte: Druck 125 to; Presskraft 20 - 1250 kN; Hublänge 0 - 130 mm; Max. Hubgeschwindigkeit 8 mm/s; Ölmenge 80 l. Technische Daten: Anschluss 50 Hz 3x: 400 Volt; Gesamtleistung 11 kW; Maschinengewicht ca. 2100 kg; Abmessungen LxBxH 1300 x 1100 x 2400 mm. Entwickelt für enge Toleranzen; geeignet für Automotive, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
Hydraulic cable crimping pliers. This tool will help you crimp wires and connectors much easier. Auction-ID: A7-50796-19
Hydraulic cable crimping pliers. This tool will help you crimp wires and connectors much easier. Auction-ID: A7-50796-119
Stroke 50 mm, max opening 200 mm, never used Overall dimensions: 400 x 200 x 150 mm Weight: 5 kg Auction-ID: A7-50799-438
Hydraulic kit for car body repair, ideal for lifting, pushing, pulling, bending, straightening and spreading. Allows body structures to be restored to their original shape. Used for repairing cars, trucks, agricultural machinery and heavy equipment. Auction-ID: A7-50799-233
1-axis converter Dolly – hydraulically liftable fifth wheel coupling – twin wheels Specifications: Type: converter dolly / trailer dolly Version: 1-axle Number of axles: 1 Wheel version: twin wheels Tyre Size: 315/70 R22.5 Suspension: leaf spring suspension Front coupling: towing eye Trailer mount: fifth wheel / fifth wheel Fifth wheel: hydraulically liftable Hydraulic control: 2 vertical lift cylinders Chassis: Heavy Duty Steel Features: Long drawbar with towing eye Fifth wheel for mounting the kingpin of a trailer Hydraulically liftable fifth wheel with support structure Two vertical hydraulic lifting cylinders Connections and hoses Support wheel Particularities: Hydraulic lifting function visibly working during recording Make, type, year of manufacture, chassis number, own weight and maximum permitted load have not been determined. Auction-ID: A1- ...
352, 8105, 8115, KL43.8, KL35.8T, 8095T, used, 500 Bh Auction-ID: A1-50849-566
Hydraulic kit for car body repair, ideal for lifting, pushing, pulling, bending, straightening and spreading. Allows body structures to be restored to their original shape. Used for repairing cars, trucks, agricultural machinery and heavy equipment. Auction-ID: A7-50796-33
Hydraulic pump capable of generating a pressing force of 10 tons, designed for hydraulic sheet metal spreaders or small presses. Auction-ID: A7-50799-151
Hydraulic kit for car body repair, ideal for lifting, pushing, pulling, bending, straightening and spreading. Allows body structures to be restored to their original shape. Used for repairing cars, trucks, agricultural machinery and heavy equipment. Auction-ID: A7-50796-233
Hydraulic pump capable of generating a pressing force of 10 tons, designed for hydraulic sheet metal spreaders or small presses. Auction-ID: A7-50796-251
Note: The items offered are sold by us unchecked. No functional or technical tests have been carried out. Therefore, we cannot provide any information on function, completeness or technical condition. Traces of use and defects are possible. We expressly point out that a prior inspection of the items is strongly recommended in order to get an idea of the condition and scope of the goods offered. Auction-ID: A1-51029-39
Equipped with CW30 and CW10 connection; base plate: 85x60cm; Auction-ID: A1-47394-276
Weight class: 10-15 t; Operating pressure: 147-167 bar; Oil flow: 80-110 l/min.; Impact force: 2033 J; Hose connections: 3/4 inch; Chisel diameter: 100 mm; Chisel guide bushed; Scope of delivery: Operating instructions; Spare parts list; CE Declaration of Conformity; 1 pyramid chisel Please note that the device shown is shown in RAL7021. The actual version can also be done in RAL9005 Auction-ID: A1-50852-81
Hydraulic kit for car body repair, ideal for lifting, pushing, pulling, bending, straightening and spreading. Allows body structures to be restored to their original shape. Used for repairing cars, trucks, agricultural machinery and heavy equipment. Auction-ID: A7-50799-33
Unused, Equipped with: Avant/Multione mount, hydraulically driven broom, hydraulically adjustable left/right, working width 105cm, working width: 1,050 mm, total dimensions (L × W × H): approx. 850 × 1350 × 650 mm, own weight: 145 kg, equipped with cable and 2-pin plug for hydraulic valve control. Auction-ID: A1-47394-296
Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1200 mm Weight: 310 kg Auction-ID: A7-50799-110
Hydraulic Press Working As Per Coil Material width up to 600 mm Material thickness up to 5 mm 2 conveyor rollers 7 straightening rollers Dimensions: Press 3500 x 2000 x 6000 mm Straightening unit 2500 x 2300 x 2400 mm Guide 2500 x 1000 x 4000 mm Decoiler 3000 x 3000 x 3300 mm Roll holder 2000 x 1700 x 2000 mm Machine can be viewed in working order ! Available in consultation Auction-ID: A1-47366-35
maximum number of results exceeded
please refine your search
2.250 € 
