hydraulic pressbrake used for sale

Key data: 250 t, 800 mm, 650 mm

LCM Taiwan, 250 tons hydraulic press Possible to inspect under power New in 2014 Table 800x800 mm Stroke 0-650 adjustable

Key data: 1250 mm, 4 mm

Max. cutting length: 1250 mm Max. sheet thickness: 4 mm steel Controlled backgauge Side stop and table extensions Cutting length limitation Cut edge lighting Light barrier to protect the rear area Knife sharpened Weight approx. 2800 kg

Key data: 600 t, 800 mm, 650 mm

LCM Taiwan, 600 tons hydraulic press New in 12/2014 Table 800x800 mm Stroke 0-650 mm adjustable full specifications attached Possible to inspect under power

pressure: 150 t stroke: mm distance between table / ram: 660 mm table surface area: 1500 x 610 mm table height over floor: mm diameter of seal: 150 mm range L-W-H: 1,7 x 1,5 x 2,3 m weight of the machine ca.: t C-frame press - hole in table Ø 120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 t, 1000 mm

LAUFFER PRESSES hydraulic press model VA 400 Capacity 400 tons Table 700x1000 mm Possible to inspect under power

Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details.

Key data: 300 t, 600 mm, 400 mm

OZKOC 300 tons hydraulic press monoblock frame New in 2025, almost new Table 600x600 mm Stroke 400 mm Possible to inspect under power

Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.

Key data: 300 t, 800 mm, 500 mm

HURSAN 300 tons hydraulic press Year of manufacturing 2021 Table 800x800 mm Stroke 500 mm Possible to inspect under power

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Manufacturer: Winter Model: VSP 350 Year of Manufacture: 2014 72015 Type of Machine :Column press Technical Specifications : - Plunger force can withstand 3500 kN - Maintain 50 mm plunger stroke - Piston force: 2500 kN - Piston stroke: 100 mm - Installation height of plunger at the top: 553 mm - Distance between columns 570 mm - Table-type pestle surface WD 392238 mm - Table height approx. 1100 mm - Overall height approx. 3250 mm - Overall width approx. 1290 mm - Total depth approx. 860 mm - Machine weight without oil: approx. 13000 kg - Oil filling DIN 51524-HLP 46 1150 l - Maintain working speed of 500 kN at approximately 30 mm/s - Maintain working speed of 3500 kN at approximately 4 mm/s - Maintain return stroke speed of approximately 60 mm/s - Working speed for cutting: 500 kN approx. 30 mm/s - Working speed for cutting: 2500 kN approx. 5 mm/s - Return stroke speed: approximatel ...

Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine.

LVD MVN 3100 x 4 mm Cutting length: 3100 mm Max sheet thickness st 45: 4 mm Depth of throat: 100 mm Strokes/min: 20 > 70 str/min Adjustable cuttingedge: 0.5 to 1.5° Electric motor (power): 15 hp Length: 3720 mm Depth: 1415 mm Height: 1830 mm Weight: 4500 kg

A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible.

Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line limit, with documentation. An on-site inspection is possible.

sheet width: 1250 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,80 t dimensions of the machine ca.: m Powered Backgauge Side Stop and Table Extensions Cut Length Limitation Cutting Line Illumination Light Barrier for Rear Area Guarding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic veneer cutter MONGUZZI mod. 3200 used theoretical useful cut mm. 3200 nr. 2 motors installed power HP 10 Motorized rear guide with mechanical display Cutting height REER safety barrier (new) for finger detection - security level type 4 - Machine length mm. 4400 Weight kg. 3800 overhauled machine, in excellent condition CE compliant

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

Hydraulic Press for Diamond Cutting Disc 60phi500phi Plate Furnace Medium Pressure Forming Machine Instruction Manual 1988.6.25 Kyodo Seiki Co., Ltd. Postal:211 518-4 Ogura, Saiwai-ku, Kawasaki-shi, Kanagawa, Japan TEL: 044(544)6925 FAX: 044-541-3546 1. Machine Specifications 1) Maximum Output: 60,000 kg 2) Max Output Pressure: 150 kg/cm² 3) Effective Stroke: 250 mm 4) Furnace Dimensions: - Horizontal Side: 8kw × 2 - Rear Side (With Door): 8kw 24kw 5) Heating Temperature: 860°C 6) Internal Dimensions: W650 mm × N 450 mm ×D 750 mm 7) Power Input: - Main Pump: 2.2 kW × 4 pole - Auxiliary Pump: 0.4 kW × 4 pole 8) Oil Tank Capacity: 120 L (ISO.VG32-56 equivalent hydraulic oil) 9) Temperature Control: Silister P.I.D Control 10) Vacuum: 4-stage 415V - 50Hz 2. Machine Installation 1) Install the press body on a flat surface. Secure it with anchor bolts if possi ...

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible.

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details.

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 150 bar -Flow rate: 42 l/min -Motor: Lammers 4.0 kW / 1440 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 630/520/H960 mm -Weight: 206 kg

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details.

This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine.

Hydraulic shearing machine manufactured in 2018. This HACO TSX3006 MOT features a maximum cutting length of 3050 mm and a cutting thickness capacity of 6 mm for mild steel. It includes automatic blade gap and rake angle adjustments, along with a backgauge adjustment range of 1000 mm. If you are looking to get high-quality shearing capabilities, consider the HACO TSX3006 MOT machine we have for sale. Contact us for further details.

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 140 bar -Flow rate: 30 l/min -Motor: Lammers 1400 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 910/520/H970 mm -Weight: 225 kg

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details.

LVD HST-C 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 12 > 50 str/min Adjustable cutting device: 0,05 > 0,8 Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 9,5 kW Length: 4110 mm Depth: 1820 mm Height: 1850 mm Weight: 5,5 ton Number of sheet holders: 21x

Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, swivel cylinders, tilt cylinders -Manufacturer: Still, hydraulic cylinder tilt cylinder double-acting stroke 50 mm -Type: 3341432170 -Piston rod: Ø 22 mm -Hole: Ø 17 mm / Hole spacing when retracted 420 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 480/105/H65 mm -Weight: 4.5 kg/pc.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Still EFG 1.5/5004 -Hydraulic pump: Type 0 510 112 304 -Motor: Type GP -14/5.5 80 V 2.0 kW -Dimensions: 345/140/140 mm -Weight: 15.7 kg

Haco ERMS 220 ton x 3100 mm CNC Capacity: 220 ton x 3100 mm Backgauge: CNC Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 18,7 kW Length: 3320 mm Depth: 2050 mm Height: 2800 mm Weight: 11,6 ton

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: Baumann, double-acting hydraulic cylinder from side loader -Stroke: 180 mm -Piston rod: Ø 60 mm -Hole diameter: Ø25 mm / Hole spacing 400 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 455/127/164 mm -Weight: 20 kg/pc.

pressure: 30 t stroke: 300 mm daylight between the columns: 700 mm dayligth: 850 mm : 140 mm diameter of piston: 60 mm table surface area: 700 x 390 mm weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,2 x 0,8 x 2,2 m Workshop Press - Movable cylinder - 2 support prisms - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: Baumann, double-acting hydraulic cylinder from side loader -Stroke: 1275 mm -Piston rod: Ø 40 mm -Hole: Ø25 mm / Hole spacing 1525 mm -Quantity: 1 cylinder available -Dimensions: 1575/80/140 mm -Weight: 36 kg/pc.

3 assen: Y1 / Y2 / X Amada bombering Capacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6,5 ton

This Krauss Maffei 80-340 C2 was manufactured in 1998. It features a MC3F controller, Euromap Interface 12, and hydraulic and air units. With a screw diameter of 35 mm, it offers a maximum pressure of 2156 bar and an injection volume of 156 cm³. Consider the opportunity to buy this Krauss Maffei 80-340 C2 hydraulic injection moulding machine. Contact us for more information.

Key data: 3100 mm, 6 mm, 1000 mm

Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Blades with 4 cutting edges Voltage: 380 V Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Key data: 3000 mm, 6 mm

The dimensions of the machine are LxWxH 2000mm x 3800mm x 1400mm. The weight is approx. 3500kg. The machine is in a little-used condition.

BLS Lamination Press has been rebuilt to meet your lamination needs. Specifications: Tonnage: 20 Ton Max Temperature: 150°C Electric Heated Platen Table Size: 600 mm x 600 mm Daylight: 425 mm Open/Closing Speed: 10 mm/s Omron PLC HPU

Bed Size:Left to Right 393mm 15.5 in Front to Back 393mm 15.5 in Daylight Between Tables 559mm 22 in Daylight Between Heated Platens 353mm 13.9 in Heating Electrical Induction Heated Platen Sizes(Up To) 355mm x 355mm 14″x14″ Max Working Platen Temperature 220°C Main Ram Stroke(Up To) 355mm 14 in Hydraulic Circuit Pressure 70 Bars 1000 PSI Main Ram Pressing Force 41 T 40 Ton Main Ram pull back 2.2 T 2.2 Ton Closing Speed(Up To) 150mm/s Opening Speed(Up To) 120mm/s

Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details.

We always have a large number of used and unused hydraulic cylinders in stock Hydraulic cylinder double-acting unused Stroke: 1500 mm Piston approx. Ø 140 mm Cylinder approx. Ø 200 mm Eyes: approx. Ø 70 mm Countersink valve Manufacturer: BUCHER CINDY 12-B-SND-S100-L-H6-7 3006010945 Total length approx. 2150 mm 210 kg An ideal cylinder for a large log splitter, test press or workshop press. Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

9 assen: Y1 / Y2 / X1 / X2 / Z1 / Z2 / R1 / R2 / V Amada / Europees type gereedschap laserbeveiliging Capacity: 175 ton x 3700 mm Backgauge: CNC - 1000 mm Control: Delem DA-66T Passage between uprights: 3100 mm Max stroke: 265 mm Max distance between table -- ram: 530 mm Depth of throat: 410 mm Table width: 104 mm Locking speed: 140 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 18,5 kW Length: 4950 mm Depth: 1700 mm Height: 2900 mm Weight: 11,5 ton Capacity: 175 ton Bending length: 3700 mm

Hydraulic press manufactured in 2006. This ERMAK CNC HAP 3100x300 features a pressing force of 300 tons and a bending length of 3100 mm. It is equipped with a high-precision Cybelec CNC control system and a robust steel frame construction, making it suitable for large and thick sheet metal bending. If you are looking to get high-quality bending capabilities, consider the ERMAK CNC HAP 3100x300 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details.

8 assen: Y1 / Y2 / X / X#39; / R / Z1 / Z2 / V met Easy Form lasermeetsysteem met CNC-bombardement met Lazer Safe-bescherming met Willa hydraulische klemming boven en onder Turbo-versie Capacity: 220 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 120 mm/sec Working speed: 21 mm/sec Returning speed: 200 mm/sec Electric motor (power): 42 kW Length: 6320 mm Depth: 2850 mm Height: 3600 mm Weight: 20 ton Capacity: 220 ton Bending length: 4100 mm

Qty. 1 Second-hand Aluminium Extrusion Press Line Mfc.: Youngstown USA Force: 1650 MT Billet dia.: 6”, 152 mm Built: early 1980s, completely Revamped in 1999 Production start: 1999 Stopped: 2025, but still under power Billet size: 6”, 152 x 550 mm Press Type: Horizontal Hydraulic, Direct Extrusion PLC: LS XGK (Korea) Required floor space: 20 mtrs x 60 mtrs