hydraulic press used for sale

Reference: Common - Lot 9 Auction-ID: A7-46763-134

Pressure reducing valve, direct controlled, hydraulic valve REXROTH ZDR 6 DP3-40/75YM 410865/0 75 bar lockable ! used, tested ! Dimensions: 250 x 45 x 40 mm

two pieces of different designs Auction-ID: A7-46287-45

Auction-ID: A1-46614-10

Pressure Reducing Valve, Direct-Operated, Hydraulic Valve REXROTH DR 6 DP3-50/75Y 469279/4 75 bar lockable ! Dimensions: 250 x 45 x 40 mm

Pressure reducing valve, direct-operated, hydraulic valve REXROTH ZDR 6 DP3-41/75YM 410865/0 75 bar lockable ! Dimensions: 250 x 45 x 40 mm

Auction-ID: A1-46614-2

Mounted on trolleys Auction-ID: A1-46781-46

Pressure reducing valve, direct controlled, hydraulic valve MANNESMANN REXROTH ZDR 6 DP3-43/75YM 00410865 75 bar lockable ! Dimensions: 250 x 45 x 40 mm

Pressure reducing valve, direct controlled, hydraulic valve REXROTH ZDR 10 DP3-51/75YM 411255/3 75 bar lockable ! Dimensions: 250 x 70 x 50 mm

on base Reference: Groven - Lot 21 Auction-ID: A7-46763-317

Connection: 230V. Auction-ID: A1-46805-8125

Auction-ID: A3-43528-5110

Max. water yield: 9.8 l/min. Auction-ID: A1-46805-13090

Pressure Gauge Selector, Multi-Stage Gauge Insulator REXROTH MS7A2.1 8 steps Dimensions: 150 x 90 x 90 mm

Table dimensions: 475 x 475 mm Auction-ID: A7-46287-18

3 high-pressure cleaners Auction-ID: A1-46806-58

Max. water yield: 9.8 l/min. Auction-ID: A1-46805-11080

With pallet of spare plates, control unit and accessory box Auction-ID: A1-46614-107

Connection: 230V. Auction-ID: A1-46805-10096

Auction-ID: A7-46410-70

Working width: 485mm. Auction-ID: A1-46805-11094

pressure:2 t dayligth:80 mm Center of spindle to wall or column:100 mm weight of the machine ca.:0,5 t dimensions of the machine ca.:0,8 x 0,6 x 2,0 m Hand operated fly press, with center turning device appr. 100 x 400 mm length - Handwheel diameter 600 mm

pressure:10 t distance between columns:450 mm :1500 mm table-size:450 x 400 mm weight of the machine ca.:470 kg dimensions of the machine ca.:1400 x 750 x 1600 mm

Pressure Relief Valve, Hydraulic Valve REXROTH DB 20-2-10/315 ( DB20-2-10/315 ) 987194 315 bar Dimensions: 160 x 105 x 100 mm

pressure:20 t Stroke:230 mm table surface area:Ø600 mm distance table - lower edge of ram:770 mm weight:595 kg

Pressure Relief Valve ORSTA CUS 10-2-02 ( CUS10-2-02 ) P= 16 MN/m² TGL 10947 Dimensions: 150 x 75 x 36 mm

weight of the machine ca.:620 kg dimensions of the machine ca.:1000 x 920 x 1550 mm

Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm

nominal force:100 t stroke:320 mm no. of strokes:35 /min distance between columns:360 / 250 mm Distance table/ram, max. stroke up, adjustment up:500 mm table surface area:320 x 450 mm table height over floor:660 mm ram surface:250 x 280 mm spindle diameter:125 mm power capacity:3,0 kW weight:4,5 t Dimensions (WxDxH):2,0 x 1,6 x 3,1 m

nominal force:160 t stroke:140 mm no. of strokes:85 /min distance between columns:400 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:400 x 450 mm table height over floor:800 mm Allowed max. force:230 t ram surface:400 x 320 mm spindle diameter:125 mm power requirement:7,35 kW weight:5,0 t dimensions (WxDxH):1,7 x 1,2 x 2,9 m

no. of strokes:150 /min impact energy:420 kJ distance lower die block / ram gudeway:435 mm Throat:425 mm steel forging - rectangular up to:110 mm steel forging - diameter up to:125 mm power requirement:22,0 kW weight of hammer:3,9 t weight of anvil:3,0 t ram hammer weight:200 kg weight:6,9 t dimensions (WxDxH):1,1 x 2,3 x 2,4 m

Used and untested

Machine number: 35-173-98 Serial number: 2-0499 Compressive force: 4.5 kN Stroke: 60 mm incl. transport trolley

consisting of stamps in different designs and sizes

Pressure Relief Valve REXROTH / HYDRONORMA DBDS 10 G12/200 ( DBDS10G12/200 ) 980898 used, tested ! Dimensions: 190 x 50 x 40 mm

Hand sheet metal shears, Dimension: 1000x260x1800mm; Mandrel press, Dimensions: 600x400x1500mm ; see photos for more details

Pressure Relief Valve, Hydraulic Valve ORSTA BDS 16-3-04.01 ( BDS16-3-04.01 ) TGL 10947 Nominal pressure: 16 MPa Nominal diameter: 16 mm used, tested ! Dimensions: 215 x 68 x 68 mm

Pressure Gauge Selector, Pressure Gauge - Selector Valve HYDRAULIC RING WM5-A3 5 steps Dimensions: 160 x 90 x 90 mm

equipped with beading rod, manually operated

Printing capacity: 8.5 kN Table dimensions: approx. 160 x 120 mm Ram diameter: approx. 25 mm Reference: Hansmann - Lot 32

Pneumatic Press incl. tools and foot pedal see pictures Condition: unchecked (6)

Machine number: 0820592 max. load: 25 kN Throat: 90 mm Plunger strokes: 75 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Motor power: 0.25 kW Table dimensions: approx. 220 x 150 mm incl. The installed punching tool

Machine number: 2-0095 Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Delay travel: 0.06 s Table dimensions: approx. 190 x 150 mm with pneumatic punching tool mounted

Hydr broaching press including keyway pressure milling

consisting of various pressing devices and tools

Machine number: 3-0419 Compressive force: 3 kN Stroke: 50 Table dimensions: approx. 150 x 110 mm